Magnetic door lock: installation, repair. Magnetic door locks for interior doors

At the Sek-Group company you can buy electro magnetic lock in Moscow and other cities. We are pleased to offer models from such well-known brands as Aler, AccordTec and Smartec. You will quickly select an electromagnetic lock, the price and main characteristics of which will completely suit you.

Main features of the presented products

Modern electromagnetic locks are deservedly popular. This is not surprising! The locks operate on the principle of magnetic influence and provide access restriction various rooms.

We sell electromagnetic locks on the door, differing:

• High reliability.
• No moving elements. Thanks to this, the magnetic door lock lasts as long as possible.
• Simple design.
• Convenient connection to the security system.

Advantages of ordering products from our company

1. Wide range models. You can buy a mortise or surface-mounted electromechanical lock for a private home, office, or any other facility.
2. Optimal prices. You can always find out the cost of an electromagnetic door lock from our specialists.
3. Convenient catalog with detailed description products and assistance with selection.
4. Prompt delivery of all goods.

Contact us! Now you know exactly where to buy a high-quality electromechanical lock.

If you are looking for a modern and reliable mechanism locking the doors, pay attention to door lock magnetic. This type products has a number of advantages over traditional designs.

In the review, we will look at the main advantages and disadvantages of such solutions, and also analyze the process of their installation - it is not complicated, so you can do it yourself.

First of all, it is worth noting one important fact: magnetic locks are a full-fledged locking mechanism that limits access to the premises. Regular door latches those with magnets are not considered locks, so we will not disassemble them.

Just as we will not consider mortise options in which locking is done with a regular key, since this option works on the principle of classical mechanisms.

An electromagnetic door lock is special device, consisting of a body with a winding and a metal counter plate. A powerful electromagnetic field is created in the winding, thanks to which the housing is securely attached to the bar, and it is almost impossible to open such a door with your hands.

Pros and cons of devices

First, let's look at all the advantages:

• Very high reliability. It is almost impossible to hack such a system; it is encoded in such a way that an attacker needs to go through billions of options, which even using computer equipment it takes a lot of time. The magnetic version is ten times more difficult to hack than the regular one, so it is often used in banks and other institutions where security is very important;

• Long service life. The system has no moving elements or mechanisms, so it practically does not wear out during operation. The electromagnet lasts for decades, so you don’t have to worry about the reliability of the system. In many institutions you can find systems that are used very intensively every day and at the same time last for a very long time;

• Ease of use- to lock the door, you do not need to insert the key into the hole. It will lock itself when the lock body touches the strike plate. That is, you don’t have to worry about whether you forgot to close your house or apartment, everything happens automatically. Opening the door is very simple: you need to press a button from the inside, a magnetic key is used from the outside, and some models have a remote control;

• Multiple unlocking options further enhance ease of use. A button is placed on the inside, and chips, magnetic cards, and remote controls can be used on the outside remote control, code systems. The latest modifications allow you to control the system from a smartphone or personal computer;
• The lock can be installed on any type of door: metal, wood, plastic, etc. Moreover, installation is not difficult, which is also important. Installing an electromagnetic mechanism is much easier than a regular one, since you do not have to select a cavity for the mechanism and adjust all the elements so that the door looks neat;

• Maintenance free. Maintaining the system involves periodically cleaning it from dust and dirt. No additional measures are needed;
• Electricity consumption is minimal. Some people do not want to install magnetic door locks because they think that electricity costs will increase significantly. In fact, you will hardly notice the difference. Energy consumption is very low, so your energy bills will remain the same;
• Do not depend on weather conditions and outside temperature. If there are problems with classic designs in extreme cold, the magnet does not react to such changes and works perfectly. You don't have to freeze in front of the door while warming up the mechanism. In addition, this option cannot be damaged by vandals, because it is located inside and it is impossible to damage it from the outside;

• The price of a magnetic lock is quite affordable, it doesn’t cost that much, but if you compare it with the top options of conventional locks, it will cost even less. And if you consider that its resource is much higher, then it is easy to understand that the costs are completely justified;
• The systems can be used on both single and double leaf doors. Moreover, only one of the doors can be opened, which is very convenient during use.

Advice! To further increase the security of the system and ensure that the doors close quickly, we recommend using a door closer. It will ensure stable closing of the doors.

As for the disadvantages magnetic systems, then there is only one - dependence on the supply of electricity. If the power goes out, the doors will simply open, which is not very good. But, as mentioned above, the lock consumes very little energy, so in case of interruptions, you can install an uninterruptible power supply; it will ensure the operation of the structure until electricity appears.

The second solution to the problem is to use two types of locks. Regular option will ensure security even if the magnetic lock stops functioning.

Important! If you use magnetic door locks for interior doors with the function of opening from the inside, you still need to provide the possibility of opening from the outside in case of unforeseen circumstances. The easiest way is to have a special remote control that will be used when necessary.

Main technical parameters

The electromagnetic door lock has several important characteristics, which you need to know about before purchasing it. It's about about the door holding force and residual magnetization.

Door holding force- any unit of this kind has a fairly large mechanical pull-off load, measured in kilograms. It usually varies from 100 to 1000 kg or more. The products of almost all manufacturers have a step between individual models of 50 - 100 kg.

Residual magnetization - Sometimes it happens that even a door with a disabled lock can be difficult to open. This happens for the reason that the residual magnetization of the electromagnetic lock installed on it is too high due to the manufacturer’s violation of the technology or incorrect selection of the parameters of the magnetic material. Normal this indicator should not exceed 1.5-2 kilograms.

Installation of a magnetic lock

Now let’s figure out how to install the structure with your own hands. We will look at the main stage: installation locking system, you can attach the opening button from the inside and the reader from the outside without our help, because you need to lay a wire there and fix the elements on the wall or door frame.

The work instructions look like this:

Illustration	Description
	You need to remove the electromagnet and the metal plate on which it will fix the door leaf from the kit. Carefully inspect the elements, try on the striker plate to the magnetic part to understand how it should be positioned on the door so that the surfaces adjoin each other over the entire area. If there are distortions and a loose fit, the reliability of the system will greatly decrease.
	We recommend purchasing locks with connectors already installed. This is much more convenient than twisting wires or soldering them. The connector is similar to a regular telephone plug, it is easy to connect and disconnect, it is safe and does not require special electrical knowledge.
	You will need a drill to drill the holes. If you need to work with concrete, it is better to use a hammer drill with an impact drill. The specific solution is selected depending on what materials need to be drilled, because the walls can be different, as well as the door frames and the trim on them.
	To take all the necessary measurements, you need a tape measure or ruler of suitable length. A pencil or construction marker is used for marking. Sometimes you may also need a square to accurately transfer marks from one plane to another.
	To tighten the screws, a screwdriver is used, most often it is a cross-shaped version of PH2. But there may be other configurations, it all depends on the fasteners that come with the package.
	The hexagon socket wrench is used to secure the lock body. Most often it is included in the kit, but it may not be. Therefore, check the availability of this tool; if it is not, then find it separately, it costs a little. Most often you need the 5 mm option.
	The easiest and fastest way is to attach the lock to the top of the door leaf. There it does not create much interference, and it is not difficult to install it, since nothing will interfere with the work. Surfaces must be smooth and clean. If you need to paint a door or frame, it is better to do it in advance.
	The location of the strike plate on the door is determined. Two marks are placed, and the template that comes with the lock is glued to this place. This is a sticker that will be very easy for you to navigate in the future. It will eliminate any deviations in size and ensure accuracy and high speed carrying out work.
	As you can see in the photo, there are three marks on the sticker. They not only show where the holes are drilled, but also indicate their diameter. You should carry out the work, guided by the tips on the template - everything is very simple.
	Holes are being drilled. At the edges they have a small diameter - the protrusions on the edges of the plate will go there, which prevent it from turning and ensure the stationary position of the element. A larger hole is made in the middle; it is needed for the fastening screw, which will hold the mating part on the door leaf.
	The mating part is secured with a screw, which is tightened with a hexagon. The plate is carefully placed so that the protrusions fit into the outer holes, after which it is fastened. It is necessary to fix the element tightly. Tightening is done manually, this is quite enough to ensure reliability; you should not use a power tool, as you can break the thread.
	When the plate is installed, the mount should be flush with the surface. The element itself fits tightly to the door frame and stands along its line - this correct option installation
	The housing is placed at the location of the plate. We need to figure out how it will stand on the door frame in order to plan the location of the fasteners and make sure that everything is fine and there are no problems further work there won't be.
	A mark is placed on the wire location line. It will be necessary to drill into the structure in this place to pass the cable and hide it from view.
	The body is pressed tightly against the plate, after which markings are made. It is important that the surfaces touch along the entire length; hold the element tightly during the marking process.
	A hole is drilled for the cable. For work, use a drill of such a size that you can pull through not only the wire, but also the plug at the end, which is always a little larger.
	The frame strip is attached to the door frame. It is unscrewed from the structure and fixed to the surface using self-tapping screws that are included in the kit.
	The lock body is screwed to the bar with four hexagon socket screws.

Cost and where to buy?

Magnetic door lock can be purchased from:

• door and door hardware store
• on the construction market
• in the online store

The average cost ranges from 500 to 2000 rubles.

Conclusion

Now you know what an electromagnetic door lock is, its advantages and disadvantages, and you can install this option at home without outside help. The video in this article will explain more about the installation process to help you understand it better.

Locks are needed not only on entrance doors; they are often installed on interior paintings. If in the first case the main emphasis is on the safety of the mechanism, then in the second - on convenience and ease of use, as well as the compactness of the device. Magnetic locks meet all these requirements, which is why they are often installed on interior doors.

Features and characteristics of magnetic locks for interior doors

To ensure normal functioning interior doors for many years, it is necessary that the leaf and door frame be made of quality materials, and the lock is correctly selected and installed. Interior doors are opened and closed more often than entrance doors, so the requirements for the reliability of the locking devices installed on them are just as high, and for secrecy and burglary resistance - much less.

The magnetic lock on the interior door must be designed for large number opening and closing cycles

Magnetic locks meet these requirements, therefore they are very popular when installed in interior doors. Despite small sizes, they perfectly fix and hold the door leaf. The principle of their operation is based on the fact that a magnetic strip installed in the door leaf attracts metal parts, located in the jamb. Some models only allow you to fix the doors in closed position, there are devices that automatically lock them and require an electronic key to open.

Types of magnetic locks

All magnetic locks are divided into several types:

• passive. These are the most simple mechanisms, their design is similar to those used on furniture doors, only more powerful. The principle of their operation is very simple: a metal plate is placed on the jamb, and a magnet is placed on the canvas. When the door is closed, these elements are attracted to each other and reliably hold the door closed. In order to open the doors, a certain force must be applied, after which the magnet and the plate open. Most often, such locking devices are installed on accordion doors, but there are powerful models, which can also be mounted on swing doors;

  A passive magnetic lock for an interior door works in the same way as a furniture lock, but its holding power is higher

• with crossbar. Such devices have more complex design. In addition to the magnet, they contain mechanical elements. Outwardly they resemble ordinary mechanical locks, but there is no pressure spring in their design. The crossbar, made of magnetized material, is attracted when the door is closed and enters the striker. To open the door, you need to press the handle, after which the bolt and the counterpart open. Locks with a deadbolt secure the door more securely, which is why they are most popular;

  When closed, the bolt is pulled inside the striker and securely holds the door.

• electromagnetic. Typically, such mechanisms are installed on entrance doors, but if there is a need to ensure reliable closing of the interior door, then they can be used here too. You can open such a lock using an electronic key. The main feature of electromagnetic locks is that to ensure their operation it is necessary constant food. If it is not there, then the lock is open.

  An electromagnetic lock is usually installed on entrance doors, but it can also be mounted on interior doors

The main advantages of magnetic locks:

• absence of noise during operation, which is very convenient and allows you to install such locks in children's rooms or bedrooms;
• ease of installation;
• long service life, since the mechanism contains practically no rubbing parts;
• affordable price.

Magnetic locks, like any other locking mechanisms, have a number of disadvantages:

• the magnet works constantly, so metal dust will accumulate around it, and iron objects that fall into its area of ​​action may also stick;
• the magnet begins to act at a certain distance, so it works as a closer. If the lock is opened with a key, then one must take into account the possibility of it spontaneously latching even when there is no draft in the house;
• if the purchased model does not have a rod or a door leaf position sensor, the magnetic bolt may come out of the case when closing the door and break when it hits the frame;
• For the electromagnetic lock to operate, a constant power supply must be provided.

Features of choice

IN construction stores exists large selection magnetic locks designed for installation on interior doors. When choosing, you need to pay attention to the following characteristics:

• lock type;
• form;
• size;
• holding force.

You should definitely ask what load the lock you are purchasing can withstand. For plastic doors or light fiberboard structures, it is enough to purchase a locking mechanism designed for a load of up to 100–150 kg. If you plan to install a magnetic lock on massive wooden doors, then you need to buy a lock that can hold up to 250–350 kg.

Electromagnetic locks are capable of holding loads of up to 400 kg and above, which is why they are placed on massive doors

To ensure maximum term magnetic lock service it must have high quality protective coating. Typically, such structures are coated with a layer of nickel or zinc. To increase the service life of the metal plate, it can be covered with a special film. It is not recommended to paint the magnet and the mating part of the lock, as this will reduce their technical characteristics.

Video: pros and cons of magnetic locks

Installing a magnetic lock on an interior door

If you have basic carpentry and plumbing skills, then installing a magnetic lock on interior doors will not be difficult.

To perform installation you will need the following tools:

Installation procedure for a mortise magnetic lock:

1. Marking. A mortise magnetic lock is usually installed at a height of 90–110 cm from the floor. At the end of the door, mark the place where the niche for installing the lock will be located. If the lock has a handle, then choose a place for its installation on the front side of the door.

   A lock is applied to the canvas and its dimensions are noted.

2. Creating a hole for the handle. In the marked place, using an electric drill, make a through hole for a square-section rod, which will connect the handles located on both sides of the door.

   If the lock has a handle, then a hole is made for its installation.

3. At the end of the door, they first make a small sample for the front lock plate, and then create a niche in which the mechanism itself will be installed. It must match its size. Create a niche using hand router. If such equipment is not available, then you can use a drill with feather drills or a hammer and chisel.

   The place for the lock can be made using a drill, router or hammer with a chisel

4. Mark the places for attaching the lock. To do this, place it in a prepared niche and drill holes for self-tapping screws in the places where the mechanism is fixed to the canvas.
5. Lock installation. Insert the lock into the niche and securely fix it on the end of the door. If there is a handle, then fix it on the doors and check the functionality of the mechanism.

   After installing the lock and handle, check its functionality

6. Installation of the response part. If the lock does not have a bolt, then a strike plate is simply fixed on the door frame opposite the lock. If there is a crossbar, you must first make a place on the frame for its entry. To do this, you can use a router or electric drill, a hammer and a chisel. Then install the strike plate and check the functionality of the lock.

   The strike plate is mounted opposite the lock

Video: installation of a magnetic mortise lock

Repair and replacement of magnetic locks

Although magnetic locks have high reliability and serve for many years, situations may arise when they need to be repaired or replaced.

Signs indicating that a magnetic lock needs to be repaired:

• deformation of the fastening has occurred;
• the lock or strike plate is loosened;
• lack of magnet attraction;
• noise when the lock operates.

The main causes of breakdowns of magnetic locks are most often associated with improper installation or the purchase of low-quality products. If the mechanism is of poor quality, then repairing it will help eliminate the problem only for a while; anyway, it will soon have to be replaced. If problems arise due to improper installation, then you can try to fix it.

Repair of passive magnetic locks:

Repair of a lock with electromagnetic control:

If during the repair process it turns out that it is impossible to fix the damage, you will have to completely replace the magnetic lock. There's nothing complicated about it. To simplify the work and not create seat for a new mechanism, you need to purchase the same lock model or device with similar dimensions. In this case, it will be enough to simply remove the failed mechanism and insert a new one in its place.

Video: magnetic lock repair

In order for a magnetic lock installed on an interior door to work long and reliably, it must be used correctly. There is nothing complicated about this, just follow simple rules:

If you purchased and correctly installed a high-quality magnetic lock, then under normal use it will work reliably for many years.

Magnetic door lock is locking device, which operates on electric current. Voltage is applied to the magnetic coil, resulting in a magnetic field that attracts the opposite part of the mechanism. Installing a lock does not require special skills and can be done on your own. The advantages of the mechanism are its unpretentiousness to weather conditions when installed on wickets or gates, as well as long term product services.

Standard equipment and additional equipment

The design of the magnetic lock depends on the initial configuration, that is basic elements And additional devices, which can be connected to the mechanism for convenience.

Lock kit upon purchase

The basic set of locking mechanisms for interior doors and entrance doors consists of:

• a powerful magnet operating under the influence of electricity;
• a reciprocal metal strip attracted to the magnetic plane;
• an electrical cable connecting the magnet to the power source;
• fastening connections;
• instructions describing how to install magnetic locks of this type.

The magnetic lock can be controlled in two ways:

1. push-button mechanism that closes electrical circuit when closing and interrupts the power supply when opening;
2. an electronic mechanism consisting of two sensors:
   • Hall sensor, which constantly monitors the voltage supplied to the lock;
   • magnetic contact, giving a signal when the device is operating.

By appearance It is impossible to determine exactly how the lock is opened. The Hall sensor is built into the main part of the lock. However, the device comes with electronically controlled There is an additional magnetic contact sensor.

All sensors, opening buttons and electronic keys are included as standard equipment.

Additional devices for magnetic lock

Installation of a magnetic lock is possible with additional devices that facilitate its operation and control, these include:

• an uninterruptible power supply unit that ensures the operation of the locking mechanism during periods of absence DC voltage. A battery is built inside the unit, which begins to operate when there is a failure in the central power grid. You can charge the batteries using the mains adapter that is included with the unit;

• controller – a device that is necessary to connect additional equipment. If a control unit is supplied with the lock, then the controller is built into this device. Otherwise, it will need to be purchased additionally;

• a closer designed for smooth closing of a magnetic lock. If the main locking mechanism is equipped with a closer, then this element will extend the life of the device, since strong shocks that can damage the magnet will be eliminated;

• intercom. This device is mainly installed on the door to the entrance or on the gate leading to the territory suburban area. Using an intercom, you can see or hear a person who wants to enter a closed area and open the lock without leaving the apartment or house, respectively.

The complete set of equipment included in the magnetic lock is determined independently by the user.

Installation of a magnetic lock

Magnetic lock on front door May be:

• holding. A magnet located on one part of the lock holds the door in the closed position due to a metal plate installed on the mating part. Retaining magnetic locks are overhead;

• shear. Due to the action of the magnet, the tongue of the locking mechanism is fixed. Shift magnetic locks are mainly produced as mortise locks.

Retaining locks are mainly installed on metal doors and gates, and sliding mechanisms are designed for wooden entrance and interior doors.

Installing a rim retaining lock

Installation of a magnetic lock on a retaining type door is carried out at the top of the door leaf or on the side. When installed at the top of the door, the passage opening is significantly reduced, which does not happen when the device is mounted on the side.

Installation of the retaining lock is carried out according to the following scheme:

1. a stencil of a counter plate made of metal is attached to the door leaf. This stencil comes complete with a lock;
2. holes for mounting bolts are drilled using a stencil;
3. the plate is installed in the prepared place and fixed;
4. the area for installing the magnetic housing is marked;
5. the magnet can be mounted on a metal plate or mounting bracket, depending on what is included in the set with the lock;

1. mounting holes are drilled;
2. a platinum or corner is installed;
3. the magnetic component of the lock is fixed;

1. on outer part wires are supplied to the door for installing the reader;
2. With inside an exit button is installed;
3. The magnetic lock is connected according to the attached diagram;

1. electrical wires are hidden in cable channels;
2. the quality of work and equipment performed is checked;
3. if necessary, mounted in a similar way additional devices, which are connected to the corresponding places on the controller.

Installation of the retaining magnetic lock is carried out using a drill and screwdriver.

Installing a mortise lock

Installing a sliding-type magnetic lock can cause difficulties for non-professionals, since the lock is installed inside the door.

To make a tie-in yourself, you need to follow these steps:

1. . This additional procedure makes further work more convenient;
2. then, using a drill with a special attachment, a through hole is drilled in the place where the mechanism is supposed to be installed;
3. Markings corresponding to the dimensions of the lock are applied to the door leaf. This is necessary to determine the correct size of the niche into which the locking mechanism will subsequently be installed;
4. a niche is drilled;
5. the connection points between the lock and the door are marked;
6. holes are drilled for the mounting bolts. The diameter and depth of the holes must match the dimensions of the bolts as accurately as possible;
7. the first part of the lock is fixed;
8. similarly on door jamb the second part of the lock is installed, in which the tongue of the locking mechanism will be magnetic;
9. the door is installed in place;
10. necessary additional equipment is installed;
11. the lock and all components are connected to electrical network. The connection diagram for the magnetic lock must be included with the equipment;
12. The operation of the device is checked.

If errors and/or malfunctions are detected in the operation of the lock, then it is necessary to remove the mechanism (you can read how to remove the magnetic lock in the attached instructions), check its serviceability in an uninstalled form and carry out all the installation steps from the beginning.
The entire process of installing a magnetic lock inside the door is shown in detail in the video.

A magnetic lock is a highly reliable device. Repair of a magnetic lock is required extremely rarely and consists of replacing any part of the device. Installation and control of the locking mechanism is accessible to any user. When selecting a device, it is recommended to rely on the necessary equipment, which determines the functionality of the lock, the quality guaranteed by the manufacturer and the intended installation location.

When carrying out renovations indoors and changing doors, it is worth thinking about the lock that will be installed on them. At the same time, preference is increasingly being given to magnetic locks. They are installed on both the entrance and interior doors.

Types of magnetic locks

There are two main types of magnetic locks:

• passive;
• electromagnetic.

Passive has no additional electrical supply, so its holding force is not great. Such locks with a magnetic latch are often used on interior accordion doors, as well as on furniture cabinet doors. To open them, the handle is pulled and the magnet opens.

Electromagnetic requires additional connection to the electrical network and can withstand pressure up to 1 ton. It is usually placed on the front door. It has both mechanical and electrical elements and varies depending on the installation method. An electromagnetic lock can be:

Operating principle

The passive magnetic lock with a simple latch is designed very simply. He doesn't have mechanical parts and consists of two elements: a metal plate and a magnet. To open the door, the handle is simply pulled and the lock elements are released.

Passive magnetic lock with mechanical elements and a more complex latch is designed differently. When turned, its handle moves the metal plate away from the magnetic strip, and the interior doors open. Such locks are increasingly used on interior doors instead of regular ones.

The operating principle of an electromagnetic lock is more complex. The door is held closed as long as there is power to the lock. electric current. It opens with a special magnetic key or code, which is entered on the panel provided for this. In this case, the current supply stops and the magnet opens.

Advantages and disadvantages

A magnetic lock has a number of undeniable advantages:

• silent operation;
• durability;
• compatible with code panel, call button, intercom and other security devices;
• attractive appearance.

The following disadvantages are worth noting:

• need for uninterrupted source nutrition;
• large mass and size;
• ease of repeated unauthorized entry.

Without electricity, the electromagnetic lock opens and ceases to perform its functions. This is both a plus and a minus. According to requirements fire safety V shopping centers, large offices and other premises with large crowds of people, locking devices on the doors should open when the power is turned off. But this leads to a decrease in security and facilitates the penetration of intruders when installed on the doors of entrances and apartments. Therefore, the connection diagram for such locks often includes an uninterruptible power supply.

If the attacker managed to open the door once with a simple electromagnetic lock, then he can easily do it again. To do this, tape or adhesive tape is glued to it or the strike plate, which weakens the contact, and the door will open when force is applied. In many castles this problem is simply solved. Their circuit includes elements that warn of incomplete locking using an audible signal.

Installing a passive lock

Installing a passive magnetic lock on a door with your own hands is not difficult. To do this, a magnetic plate is attached to the interior door leaf, and a metal plate to another leaf or frame.

A do-it-yourself passive lock with a handle is mounted according to the same principle as a regular one. A recess is made for it in the canvas, and the handle is placed in the hole. A reciprocal recess is made in the loot for the tongue. When you turn the handle, the magnet and latch are separated and the doors open easily.

Installing an electromagnetic lock

They can be installed on metal, wood, plastic, metal-plastic and glass doors. Installation varies depending on the type of lock.

1. Overhead magnetic lock. It is easier to install it yourself than a mortise one. The strike plate is attached to door leaf using special fasteners that come with the lock. The marking diagram is glued at the installation site, and through holes are drilled for fastening. Their size is indicated in the accompanying documentation for the lock. Lies between the bar and the door rubber gasket. You should not screw the striker too tightly; it should spring back a little thanks to the gasket, which will ensure correct and free magnetization to the lock.

The lock itself is attached with your own hands using a corner. Depending on the door material and how it opens, corners are used different shapes. After completion of work, the device must be connected to the network and checked. The connection diagram is included in the kit.

Magnetic lock repair

A magnetic lock, like any other, may require repairs. Breakdown is caused external influence, unfavorable conditions environment or power failure. Repair will depend on the type of damage.

If a magnetic lock is installed on the gate, then the locking device may fail under the influence of weather conditions. Repair consists of replacing it. To prevent the problem, take care to minimize exposure to rain, snow and other factors. Most devices are reliable, opened using a special keychain. Their mechanism is hidden inside and well protected.

If the power line is broken, you need to take care of repairing it or replacing the cable.

In any case, it is better to entrust the repair to an experienced specialist who is well versed in the principle of its operation. Doing it yourself can completely disrupt its functioning, and then you will have to replace the lock with a new one.