Modern faucets are complex high-tech equipment. When choosing it, you need to pay attention to both the principle of the device and the appearance. After all, the mixer must be practical, durable and fit harmoniously into kitchen interior. Today there are many varieties of such products. They are manufactured by different global companies.
Expert advice will help you figure out which kitchen faucet is best to choose in each specific case. Before purchasing, you need to study what types of structures exist on the market today plumbing equipment, as well as what materials manufacturers use to create their products. Distinctive features the most popular technologies, their advantages and disadvantages should be known to every buyer before going to the store.
Types of faucets
Based on their design, kitchen sink faucets can fall into one of three main types. There are single lever, valve and sensor devices. Each of them has its own advantages and disadvantages.
In addition to design features, plumbing fixtures are classified according to a number of other characteristics.
According to the method, there can be two types. The first option is mounted directly on the countertop, and the second - on the wall. The first type of installation is more common. The spouts of such faucets are high, which allows you to wash dishes comfortably. Mounting the device on the wall frees up some space on the countertop.
There are also single-piece or prefabricated faucets. In the first case, the product is reliable, but inconvenient to use. Prefabricated types of structures are purchased much more often.
Valve products
Faucets with valves are a classic. Over time, their design was improved. The plumbing equipment market offers quite reliable and durable devices. To adjust the water temperature using this mixer, you need to turn two valves. This principle is used today in both cheap and expensive equipment models.
Mixer for kitchen sink valve type can be with a worm mechanism or have ceramic cassettes inside. In the first case, the locking device presses the rubber gasket, restricting the flow of water. The ceramic cartridge only needs one (or even less) turn to fully open the water flow. It is more reliable and durable.
Worm mixers require frequent repairs, especially if they are installed on hotline water supply
Advantages and disadvantages of valve devices
To understand which kitchen faucet is best, you need to take into account all the advantages and disadvantages of each type of design. Valve varieties can be very cheap. Especially if they have a mechanism with a rubber gasket installed.
But there are also very expensive valve mixers. They have a special design. Replacement cassettes for valve-type mixers are widely available on sale. However, there are no universal cartridges. You need to look for a suitable cassette for your device model.
Kitchen faucets for sinks of this type are easy to repair, but they fail quite quickly, especially if there are rust particles in the water supply. It is also one of the most uneconomical types of plumbing equipment. While the user adjusts the heat level, a certain amount of water is wasted.
Single lever design
A newer type of design is the single lever mechanism. It costs a little more than the previous design. But such products add comfort during use. The single lever mixer allows simple movement adjust water pressure and temperature.
There are different principles for the design of such cartridges. They can be ball or ceramic type. The first option is highly complex. In this case, breakdowns occur more often. Ceramic cartridges are similar in principle to valve cassettes made of this material.
Any type of single-lever faucet requires the installation of a filter rough cleaning. Without it, internal elements are destroyed under the influence particulate matter rust and dirt. This type of device is chosen if the kitchen interior is designed in a modern style. This is a reliable and fairly durable mechanism.
Touch devices
Representatives of the new generation are the world's largest manufacturers supplying such devices to the plumbing equipment market. The most popular kitchen faucets in this area are Grohe, Kaiser and some other brands.
A person places his hands under the tap, the touch sensor makes recognition. The water turns on automatically. Moreover, the user sets the exact heating temperature (down to a degree). Regardless of the pressure of cold and hot water in the system, the device mixes them in the required proportion.
This is the most convenient device. Its disadvantage is its rather high cost. There are models with completely electronic adjustment or combined control. The second option is preferable. If there is no power supply, the mixer can be operated manually.
Spout type
There are two types of spouts that differ in height. Each owner chooses one or another type in accordance with the depth of his sink. A tall kitchen faucet can splash water heavily. This can be avoided if the kitchen sink is deep.
The short spout is designed for a shallow sink. It is more convenient to wash dishes when the mixer is tall. This is especially noticeable when the housewife needs to clean a deep pan or other dishes with sides. Therefore, a high spout for the kitchen is more often chosen.
The exception is faucets that are mounted on the wall. Their flow is low. But the installation level in this case is chosen according to the depth of the sink.
Spout design
Today, many manufacturers produce universal spout designs. They can be increased or decreased if desired. The most commonly used is a telescopic or flexible kitchen faucet.
The first type of spout has many moving structural elements. These are retractable tubes fastened with special connections. A large number of seals on moving elements make such spouts unreliable.
Faucets with a retractable flexible hose are more popular. It is hidden in the body of a decorative tap with a short spout. If necessary, such a hose can be extended to a length of up to 1-1.5 m. The design resembles a regular shower. When choosing, you need to pay attention to the quality of the decorative spout and the strength of the hose. This device is more durable than a faucet on hinges.
Material
Today, for the manufacture of mixer bodies they use different materials. The most popular are metal and brass. They have affordable price And high quality.
The most expensive are copper and bronze. Elite series are created from them. This is a very durable and long lasting kitchen faucet. Bronze and copper look rich, especially in a classic interior.
Cheap series are made from silumin material or an alloy of aluminum, zinc and copper. Their strength is inferior to previous types of metals.
There are products on sale made from various plastics in combination with metal-ceramics. They are quite durable, but mechanical influences they are quickly destroyed.
Chrome plated varieties are stronger. But traces of water droplets quickly make such a kitchen faucet unpresentable. Chrome limits decorative qualities equipment. Such faucets do not fit into every type of interior.
Additional devices
When choosing which kitchen faucet is best, you should pay attention to various additional elements.
First of all, pay attention to the presence of an aerator and its type. This device reduces water consumption to 7 l/min. The aerator mixes it with air, increasing the output volume.
This device can be adjustable (more often installed in expensive models). This aerator also allows you to control the direction of the jet. This adds comfort during operation. If the buyer wants to save water, it is better to pay attention to the design of the aerator.
Another useful additional feature could be LED lights. This mixer looks original and stylish. At the same time, it is much easier to wash the dishes efficiently, since the tap creates additional lighting.
Popular manufacturers
Today mixers of various price categories Many foreign companies are launching on the market. Chinese products are much cheaper than products from European brands. But their quality leaves much to be desired.
The highest quality and most in demand today are German products, for example, kitchen faucets “Kaiser”, “Groe”, “Hansgroe”. These are proven, durable products. These mixers are presented in the middle and high price categories.
The products of the Danish company Damixa are recognized all over the world as high quality. The product range of this manufacturer is very diverse.
Relatively inexpensive but high-quality faucets are offered to consumers by the Bulgarian manufacturer Vidima.
A good, durable faucet gives heavy weight. The lightweight product is made of cheap materials. It quickly becomes unusable.
Buying a kitchen faucet is a delicate matter. You shouldn't rely on intuition here. It is not wise to completely trust everything that managers and sellers tell. After all, they are not professional plumbers, and are not always competent.
When choosing a kitchen faucet, people often pay attention to its appearance and aesthetics. Select a model that suits the kitchen design and interior. In fact, in order to purchase a really good and high-quality mixer, you should also study the principle of its operation.
This kitchen water supply appliance is used daily. It can withstand enormous loads. For this reason, it is important to purchase a high-quality and durable model that will last. long years, and will not fail several months after installation.
How to choose the right one, what should you pay attention to before purchasing? Let's try to figure it out.
Types of kitchen faucets
There are three types of kitchen faucets.
- With two valves - a fairly common model. The design consists of two taps with a spout in the middle. The intensity of water flow is regulated using valves. The cost of such a plumbing fixture is low. But consumers are increasingly less likely to purchase just such a model. It is short-lived, components quickly fail, gaskets wear out. But there is also a small advantage - if one of the valves fails, it will be enough to change only the faucet axle box, without replacing the entire mixer.
- Single lever is the most popular among buyers. Reviews about it are only positive. Great for the kitchen. It is convenient and comfortable to use. One movement of your hand is enough for water to flow from the tap. The temperature is adjustable at will, and in some models it is set by a special device located under the sink. The price of such plumbing fixtures starts at the minimum, accessible to consumers. With proper care, the service life is long.
- Touchless faucets are expensive. But the price matches its quality and functionality. This kitchen unit is convenient, practical, and saves water during use. Built into the sink body. The operating principle of a touchless faucet is simple. It is enough to place your hand under the sensor, which, after giving a signal, will turn on the flow of water. As soon as the hand is removed, the water stops flowing. This is especially convenient when preparing food, when your hands may get dirty. This group also includes faucets with touch panels.
Spout form and functionality
When choosing a kitchen faucet, you should definitely pay attention to the gander. How convenient and comfortable it will be to use depends on its shape. When turned on, the water should drain strictly into the center of the washing bowl.
Attention! From a very high spout, with strong pressure, water sprays into different sides while washing dishes. It is problematic to wash large dishes under a very low gander.
When choosing a mixer, you should give preference to swivel models with an average height of the gander. If you use several sinks (for example, in catering establishments), it is better to buy one that has a retractable design. By the way, this function is also very useful for a home faucet:
- with the help of a retractable gander you can easily wash large kitchen utensils;
- it is indispensable when you need to fill a bucket or a very large pan with water, standing, for example, on the stove. The hose can be extended over a distance of more than a meter.
The type of spout can be any; today you can find designer models of various shapes on sale. In addition, the spout can be flexible, its shape can be changed as desired.
When buying a kitchen faucet, you need to pay attention to the design of the nozzle. It is convenient if there is a shower head with a switch (divider). It is convenient to wash berries, tender or very soft vegetables, fruits or herbs in the shower. By switching to a normal jet, you can easily wash dishes and kitchen appliances.
Useful functions of faucets
Manufacturers, developing faucets, each new model They are trying to make it more functional and practical. Additional features will delight the most demanding and discerning customers:
- Additional water filtration (additional purification) is an indispensable function. Usually two separate spouts are installed to supply drinking and household water, but there are models where both taps are combined.
- Built-in water heating is a very necessary device in the kitchen. Especially if the hot water is turned off periodically. Such models are produced by the manufacturer Grohe.
- Nozzles and fittings that save water. Even with strong pressure, such a nozzle will normalize water consumption.
Selecting the material and coating of the kitchen faucet
No matter how expensive, practical and beautiful the faucet is purchased, its service life depends on the materials from which it is made. Modern kitchen faucets are made from an alloy of metals, plastics, and ceramics.
Advice. Budget options include faucets made of aluminum-silicon alloy and plastic. Steel and ceramics will cost more, but will also last longer.
Metal – bronze-brass kitchen units for supplying water, have proven themselves on the positive side. They are durable and strong.
A plastic faucet is not expensive. It is lightweight, durable, and does not heat up. A significant drawback is that such a mixer quickly fails and breaks.
There is an opinion that a ceramic faucet is the best. In fact, it is inferior to those made of a metal alloy. Ceramics are fragile. The faucet can be easily damaged during awkward movement or when a kitchen appliance falls on it. However, such models look stylish.
When buying a kitchen faucet, you should pay attention to its coating. It can be chrome-plated, enameled, or made of stainless steel. The chrome faucet looks very beautiful and impressive. The enamel looks decent, but such a faucet will not be beautiful for long. The coating can easily come off if moved awkwardly.
Rating of the best manufacturers
When choosing a kitchen faucet, it is better not to save money. It would also be useful to study the reviews of those who already have experience using the models they like.
Among all the manufacturers of kitchen faucets, consumers identify several of the best. Finnish Oras is in the lead, German brands Grohe, Hansgrohe, Hansa. Products from the Bulgarian company Vidima and French faucets Jacob Delafon are also in demand. Russian faucets for the kitchen, Sanmix, Santekhpribor and Aquaton are cheaper than foreign ones, but are not inferior in quality.
It is best to buy a kitchen faucet not from dubious sellers, but in specialized stores that represent the manufacturer. In such stores you can get a guarantee and operating tips. It is recommended that you carefully inspect the product before purchasing. Scratches, sloppy shape, dents are a reason to refuse the purchase. In addition, you need to look carefully at the name of the manufacturer - for example, there are Hanza faucets on the market that have nothing in common with Hansa or Grehe, masquerading as famous brand Grohe.
It is better to entrust the installation and connection of a kitchen faucet to a professional technician.
How to choose a kitchen faucet - video
Not everyone knows that kitchen faucets withstand significant and heavy loads every day?! Experts made calculations that showed that a water tap installed in a kitchen is used many times more often than in a bathroom. Therefore, when replacing plumbing fixtures, many people face a natural dilemma - which faucet is better to choose for the kitchen?
Kitchen faucet - which company is better to choose?
The rating of foreign brands is as follows:
- Oras (Finland).
- Hansa (Germany).
- Vidima (Bulgaria).
- Grohe (Germany).
- Gustavsberg (Sweden).
- Daxima (Denmark).
- Delafon Jacob (France).
Concerning Russian companies, then worthy and competitive products are produced by the enterprises Aquaton, Sunmix and Santekhpribor.
First of all, what should you pay attention to when choosing a faucet model, so that it matches the design and size of the kitchen sink and is as convenient to use as possible. You can get answers to all your questions regarding which kitchen faucet is best to choose on the forum.
Click to expand...
In turn, we recommend considering the option of an inexpensive, but quality device"Lemark Plus Strike", which is characterized by low noise operation and high spout. The disadvantage of this model is the poor visibility of the hot and cold water. The “Iddis Alborg” faucet, which is securely attached to the sink, is in demand among consumers. The model is equipped with a large cartridge. However, with a shallow sink, problems arise during operation due to the low spout. "Rossinka Silvermix" is one of the cheapest plumbing devices. Its advantages are its beautiful design and high spout. But as for the chrome coating of the faucet, it is short-lived.
When deciding which brand to choose a kitchen faucet, pay attention to the Omoikiri Tonami single-lever faucet. It is modern and convenient, but does not fit every sink. Another one interesting model- "Grohe Concetto". This great option for a modern kitchen. The mixer is made of high-quality material, has a quiet aerator and a reliable cartridge. The disadvantage is the complexity of installation. The advantage of the Kaiser Teka model is the outlet for filtered water, and the Jacob Delafon has a channel for tap water and a separate channel for filtered water. As for the last mixer, it has a weak standard filter, although it is quite expensive. If you have a question about which kitchen faucet to choose and which company is better to give preference to, you should contact a qualified specialist.
Types of kitchen taps
In order to independently figure out which faucet to choose for the kitchen, you need, at a minimum, to familiarize yourself with the varieties of their design.First view- crane-axle. These are standard plumbing fixtures consisting of two valves that allow cold and hot water to mix. In addition, crane axle boxes are divided into 2 more subtypes based on the type of locking mechanism:
- Worm-shaped;
- Ceramic.
- simplicity of design;
- there are no difficulties during repairs;
- affordable price.
- significant overuse of water;
- difficulties in finding the right model of crane axlebox in case of breakdown;
- inconvenience in management.
Second type- single lever (joystick). Based on the type of mechanism, they are divided into 2 subtypes:
- Ball. Have complex design. Their disadvantages include rapid wear of gaskets and cuffs, as well as faucet leakage as a result of weakening of the spring of the control cuff.
- Cartridge. They consist of 2 ceramic plates, one of which is fixed with a drain hole at the bottom, the second is movable at the top. The design and principle of operation of cartridge cranes are identical to axle-box cranes. In addition, the body can be fixed (cast) and rotary. In the first version, the mechanism that mixes the water is located inside the housing, and the control lever is on the side of it. The cast housing is considered more reliable during operation and is easily repaired. However, it is not entirely convenient to operate, and a large jet leads to splashing water. As for the second option, it is distinguished by ease of control, and thanks to the design, water consumption can be significantly reduced. The main disadvantage is that the sealing gasket has to be changed periodically.
- economical;
- simple and easy to use;
- have a functional design.
- expensive in the price segment;
- rapid wear of the seal in some types of construction;
- complex repairs.
Choosing material
Basically, kitchen faucets are made of different metals and alloys. Among them:- Brass. The most common and in demand material. Brass devices differ in quality and for a long time services attract relatively low price segment. Plated with chrome, nickel or bronze.
- The chrome finish has a glossy shine, but any dirt, food stains or fingerprints will be visible on it.
- Nickel plating, on the other hand, is matte and has a dull sheen. It is easy to care for.
- Bronze coating is considered reliable, although it is not resistant to scratches and chips.
- Silumin is an alloy of silicon and aluminum. Such devices are inexpensive, but they are short-lived, as they are destroyed by exposure to hot water. Silumin cranes are suitable exclusively for summer cottages and temporary dwellings.
- Stainless steel. Such faucets do not rust, they are resistant to hot water, environmentally friendly and easy to clean. Affordable, but more expensive than brass models.
When deciding which kitchen faucet is best to choose, you should also pay attention to ceramic and granite faucets. They are popular because they blend well with the sink and countertop. They are easy to care for, but such models are expensive and fragile.
Click to expand...
Selecting a crane based on control type
Kitchen faucets are divided into 3 types according to the type of control:- Two-valve. This is a plumbing fixture in the form of a faucet with 2 rotating valves located on the sides of the spout. Such constructive mechanism allows you to use water economically and is easy to repair, although it is not very convenient to operate.
- Single lever. They feature convenient single-grip controls. The lever is located on the side or on top depending on the height of the spout. The single lever faucet will fit perfectly into any kitchen interior.
- Electronic mixers with thermostat. It is controlled thanks to a built-in special sensor, which can be installed either in the body of the faucet itself or in the sink. The presence of a thermostat contributes to economical water consumption. Such cranes are very expensive.
We determine the type of spout, height and additional functionality
The convenience of drawing water from the tap, which can be either low or high, will depend on the spout of the tap. large containers so that it does not splash on all sides. The height of the spout to choose will depend on the depth of the sink. Additionally, pay attention to the bow of the faucet. The spout should be located approximately above the center of the sink. If it is located on the inner wall, there is a possibility of water accumulating behind the bowl. If the sink consists of 2 sections, then the plumbing fixture should have a swivel spout, which will help drain or direct water into two bowls. To help those who cannot decide which kitchen faucet is best to choose, the forum reveals some secrets:To harmonize the faucet and sink in color and material, select these components from the same series.
Remember that each faucet has its own design. Therefore, in order for it to harmoniously fit into the kitchen interior, you need to make the following choice:
- for high-tech style - a single-lever device of a geometric shape with chrome coating or electronic with a thermostat;
- for a classic style solution - a two-valve copper or bronze plumbing fixture;
- for the Scandinavian style - a tap made of steel or stone.
For a round bowl, choose a device with a round spout, and for a square bowl, choose an L-shaped model.
Universal color scheme considered brushed steel.
Additional tips:
- The price of the mixer includes not only the material, characteristics, but also the design.
- You need to buy goods from trusted construction stores with a good reputation.
- Consider the fact that the heavier the structure, the more reliable it is.
- Check the availability of instructions, warranty and recommendations for care and use.
What is important to know
Visit where you can learn a lot of useful information about quality plumbing. Buying a faucet for a kitchen is a difficult task, and this is due to the fact that modern market provides customers a wide range of products of different brands. After familiarizing yourself with its properties, advantages and disadvantages, you can decide which company to choose a kitchen faucet. Proper care will help extend the life of the plumbing fixture.As user reviews show, best manufacturers bathroom and kitchen faucets are brands that produce products of decent quality at a reasonable price, and also guarantee long-term and useful operation.
The best manufacturers of bathroom and kitchen faucets from the West
Grohe Group– a well-known supplier of plumbing equipment – founded in Germany in 1936. Our own developments are being introduced into production to improve the quality of functionality and save water consumption, and also use the most innovative technologies industry.
Strict quality control is ensured at all stages of production and sales of products with the typical German perseverance and punctuality.
The Groe brand, as a recognized leader in the sanitary fittings market, offers a huge range of faucets - more than 200 models of devices are presented. Modifications of German products differ in functionality, design and materials.
Grohe mixing systems are valued for their numerous additions and presentable appearance, ease of installation and ease of use. The manufacturer is confident in the decent quality of its own product and provides an extremely high warranty period of 10 years.
Branded developments that are designed to optimize the performance properties of mixers:
- Grohe SilkMove - technology guarantees precise adjustment of temperature and flow speed parameters and smooth movement of the lever;
- Grohe StarLight – ensures maximum reliability of the housing coating;
- Grohe EcoJoy - technology reduces water consumption by 50% using aeration.
The catalogs present high-functionality faucets and creative design. A series of budget models are sold in the range of $100-150, premium products cost in the range of $1000-15000.
Hansgrohe represents the origins of the development of mixing fittings, it was founded in 1901, and is considered a strong competitor of the Grohe concern. The company has 4 brands:
- Hansgrohe – mixing devices for all groups of sanitary ware;
- Pharo – functional systems for the bathroom;
- Pontos – modern solutions with water saving technology;
- Axor – sensational offers for the bathroom.
The products are distributed in the medium and expensive segment. The price range for budget lines is $50-120, elite models are sold in the range of $1000-12000. The guaranteed service life of the equipment is 5 years, but if the operating conditions are observed, as they say in the reviews, the product of this brand is practically “indestructible”.
Jacob Delafon supplies to Russian market high-quality plumbing equipment in the affordable segment. The designs of the French manufacturer are in no way inferior to German models in terms of reliability; keep this in mind if you are interested in the best manufacturers of bathroom faucets with showers.
The company was founded in 1889 and produces kitchen and bathroom faucets, shower and bidet systems, sinks and washbasins. The brand also supplies accessories for sanitary fittings. Since 1986, the Jacob Delafon brand has been part of the manufacturing giant Kohler.
Among the brand's offerings, it is not difficult to choose the appropriate product for interiors of exclusive or classic styles. The structures are made of brass; the declared service life of Jacob Delafon faucets is 5 years. Budget model can be purchased for $50, elite class equipment from Jacob Delafon costs between $500-1000.
Swiss brand Geberit in the production of mixing fittings, the company focuses on solutions for saving water. This is important for those who are interested in the best manufacturers of bathroom and kitchen faucets. Unique design, maximum strength and famous Swiss workmanship - brand names differences in brand offerings.
The company was founded in 1874 and has offices in more than 40 countries. The range of offers consists of piping and plumbing systems. Various types of faucets are produced under the Geberit brand, but the main direction of development is the production of sensory structures.
Geberit plumbing equipment has a vandal-proof design, a thermostat, and an aerator with increased functionality. Touch systems are equipped with several modes:
- saving water and energy resources;
- periodic flow supply;
- thermal disinfection and others.
The mechanisms are easy to install and operate silently. Geberit taps are made of brass with chrome plated. Absolute presentability and high cost are synonymous with products from Switzerland. Prices range from $400-700.
Concern Oras was founded in 1945. The company started as a manufacturer of shower systems. Today, the Finnish brand ranks 4th in Europe in terms of production volumes of sanitary equipment and is known as a supplier of high-quality sensory faucets for the bathroom and kitchen.
Are you interested in the best manufacturers of bathtub and shower faucets? Then know that the Oras brand represents presentable designs in a modern style. If you are looking for mixing systems with a futuristic design, minimalist, high-tech or modern style, choose from Oras' proposals.
Although the main emphasis is on contactless solutions with a thermostat, the Oras product range includes many solutions without technological frills. Here you can easily choose faucets with short or long spout, high spouts or hygienic shower. In reviews, users note that Oras bathroom faucets can last up to 15-20 years without loss of performance and aesthetic qualities.
Unfortunately, in the event of breakdowns in the brand’s mixing system, it becomes difficult to replace parts, since there are no branded spare parts on sale. There is a wide range of prices for the Oras model of sanitary fittings: budget offers are sold in the region of $50-100, premium collections cost $700-1200.
Vidima from Bulgaria produces sanitary products aimed primarily at the Russian market. Production is based on German technology, the designs stand out high reliability, the quality of the solutions meets European standards, while the product is sold in an affordable price range.
The company began operations in 1934 as a manufacturer of sanitary ware. Since 1989, the Vidima brand has been part of the American multinational giant Ideal Standard International. During the same period, models of mixing systems appeared in the brand’s catalogue.
Vidima products are designed for buyers with an average income level. The warranty period for products is 3 years. If, when choosing mixing equipment, the functionality of the mechanism, the versatility of the design and the durability of the product are at the forefront, pay attention to the modern solutions of the Vidima brand. Cost of proposals budget series— $40-80, prices for standard collection models fluctuate around $100-200.
The best manufacturers of bathroom and kitchen faucets among Russian brands
Iddis
The domestic brand Iddis produces mixing mechanisms of decent quality and pleases consumers with its democratic offerings. The catalog contains more than 100 product models. Mixers from a Russian manufacturer have a simple design, but the functionality meets the requirements European standards. Attractive prices, ease of installation and repair of structures are additional advantages of Iddis brand products.
Rossinka
Rossinka Silvermix faucets are a product of one of the most popular domestic brands in the field of plumbing equipment. The manufacturer produces models of mixing fittings in 9 series, each of which has up to 13 modifications. Among the proposals it is easy to find various types of structures:
- classic with valve mechanism or lever options;
- for the kitchen, for a bathroom with shower or bidet;
- traditional “geese” of a curved configuration or more advanced models of modern styles.
Rosinka brand designs were developed by the best representatives of technical institutes and experienced designers, and are perfectly adapted to local operating conditions. The products are certified according to international standards and are sold in an attractive range. Warranty service life – 7 years. average cost products vary in the region of 1000-4000 rubles.
Well-known Russian manufacturers of bathroom and kitchen faucets:
"Arkon". The company was founded in 1997 in Tula and produces a line of high-quality economy class faucets. The lineup also includes premium products, but prices are several times lower than for analogue designs of foreign brands.
Sunlit-T LLC was founded on the basis of the Kolpino foundry, the company supplies mixers to the market various types, plumbing and heating systems. The water fittings are made of brass and aluminum and galvanizing technology is used. From Sunlit-T products most in demand consumers use central and wall views mixing mechanisms for the kitchen.
CJSC "Santarm" has been operating in the plumbing equipment market for about half a century. Until recently, the products of the company from Rostov-on-Don were not in the first positions in the quality rating. After modernizing the production of Santarm products, potential buyers again became interested modern solutions and technology. The company’s hard work was awarded the “100” diploma best products in Russia".
JSC "Molot" Known for more than a century of experience in the manufacture of plumbing mechanisms, the catalog includes an extensive range of mixers in the medium and inexpensive segment.Aquatika is a relatively young company whose products have rapidly conquered the market for water-folding structures.
OJSC Santekhpribor Founded in 1947 in Kazan, it produces a wide range of sanitary equipment. 1/10 of the faucets purchased in the country were manufactured by this company, this fact allows us to understand the real scale of production. Among current offers The Santekhpribor company can choose both budget line faucet models and prestigious premium class analogues.
Best bathroom faucet manufacturers from China
Contrary to popular belief about the poor quality of Chinese plumbing fixtures, when the right approach When choosing a product, you can purchase a product that is worthy in all respects. The enterprises of the Celestial Empire produce magnificent “double” models – copies of European brands. In addition, most of the world's industry giants open subsidiaries in the countries of Southeast Asia and control the production cycle. The products of such enterprises are distinguished by a high level of reliability and are sold in a relatively affordable range.
Ledeme
Which brand of faucets is better to choose? Every buyer asks himself this question. Stores provide a huge range of plumbing accessories, so it will be difficult for an inexperienced person to quickly make a choice. To make your choice easier, we have compiled the TOP best faucets 2017. Having studied the options of a wide variety of brands, we provide a rating of the best according to our website.
Features of choice
Have you started a major renovation in your apartment, and now the time to buy faucets is approaching? Then you urgently need to decide on the type and style of the device. If you do not want the device to constantly leak, then you need to take your choice more seriously.
Our 2017 rating based on reviews from customers and professionals should help you make your choice. In our rating, we evaluated faucets from the following manufacturers: Grohe, Oras, OMOIKIRI, Kaiser, Lemark and WasserKRAFT. Each of the brands is worthy of a separate article, but we tried to choose the best of the best. Each model that took part in the rating has user ratings of 4 out of 5 points. Enjoy the shopping!
The best bathroom faucets
The assortment of stores includes great amount positions, so the choice for a novice plumber can be quite difficult. Below we will look at the most popular and reliable models that are highly rated by customers. You can leave your reviews at the bottom of the page.
1 Grohe Euroeco 32743000
Site editor's note: Nice model with smooth lever action. GROHE StarLight technology ensures shine and durability.
Price: from 3,554 rub.
GROHE is one of the largest manufacturers of sanitary products. This guarantees good quality and timely maintenance of faucets.
The unique GROHE SilkMove system ensures smooth lever movement even after 10 years of use. GROHE StarLight technology significantly improves scratch resistance and ensures a perfect shine throughout the entire surface. A special regulator will help save the amount of water. At the tip of the spout there is an aerator that mixes water with air and makes it softer.
- Single lever type
- No thermostat
- Chrome coating
- Vertical installation
- Spout 160 mm
- Overall customer rating:
2 Oras Nova 7447
Site editor's note: Universal solution, which ideally combines compact design and high throughput.
Price: from 14,580 rub.
This model provides vertical mount(on the wall). The set includes S-shaped eccentrics, which greatly simplify the installation of such a faucet in your bathroom.
The device is designed for a maximum pressure of 14.4 l/min. This will be enough for the bathroom, especially if you like to save money. There is a thermostat to maintain a constant temperature. It can also maintain constant water pressure. Hot water is connected on the right side.
Main characteristics for comparison:
- Double lever type
- There is a thermostat
- Chrome coating
- Vertical installation
- Spout 300 mm
- Overall customer rating:
3 Grohe Grohtherm 1000 New 34155003
Site Editor's Note: Beautiful design, good build, does an excellent job of regulating temperature.
Price: from 9,730 rub.
Quite a technologically advanced model that uses advanced developments. GROHE CoolTouch technology ensures comfortable use of the thermostat (the surface remains cool). The EcoButton regulates water consumption (savings up to 40%).
Externally, a very attractive faucet that will constantly delight you when visiting the bathroom. The coating is made using a special technology, which ensures constant shine and high wear resistance. Can be used for shower and bath.
Main characteristics for comparison:
- Double lever type
- There is a thermostat
- Chrome coating
- Vertical installation
- Spout 173 mm
- Overall customer rating:
The best kitchen faucets
Sink or washbasin fixtures may have an unusual design. They are usually initially made significantly higher than standard models to make washing dishes easier. Some models have a pull-out spout, a water filter, and so on.
1 Grohe Concetto 32663001
Site editor's note: Excellent price/quality ratio. The spout is retractable and the handle moves very smoothly.
Price: from 9,020 rub.
One of the best options for kitchen faucets. The device is mounted on board the plumbing fixtures (horizontal installation). If you are installing the model for the first time, the quick installation system will help you. To do this, insert the fastener into the hole and tighten it with a hex bolt.
For more convenient washing, a pull-out spout is provided. It greatly simplifies the washing of tall and bulky dishes. This model can rotate 360°. Now every corner of the sink will be accessible to the mixer. The unique GROHE StarLight system will help maintain the shine of the coating after many years of use.
Main characteristics for comparison:
- Single lever type
- Pull-out spout available
- Chrome coating
- Horizontal installation
- Spout (length/height) 215/215 mm
- Overall customer rating:
2 OMOIKIRI Tonami-C
Site editor's note: Nice model with a separate filter for water purification.
Price: from 10,588 rub.
A special feature of this model is the presence of PURE LIFE technology. A separate tube supplies purified water that does not come into contact with the tap water. Switching from one handset to another is carried out using a switch.
The faucet is made of brass and does not contain lead. This ensures high quality water. The built-in aerator mixes air into the water, thereby making it more uniform. The rotation angle of the mixer is 360°. According to customer reviews, it is a very reliable device (manufacturer - Japan).
Main characteristics for comparison:
- Single lever type
- There is an aerator
- Chrome coating
- Horizontal installation
- Spout (length/height) 208/156 mm
- Overall customer rating:
3 Kaiser 13044
Site editor's note: A good option at a fairly reasonable price. There is an aerator and a water filter.
Price: from 4,700 rub.
A good option for a stylish kitchen. A special feature is the height of the mixer (315 mm), this allows you to wash large dishes. Easy switching from tap water to filtered. Most buyers choose this model because of its visual appeal.
Good quality brass body. Two built-in aerators provide a smooth and soft water flow. Spout rotation angle is 360 degrees. This allows you to reach every corner of the sink.
Main characteristics for comparison:
- Single lever type
- There is an aerator
- Chrome coating
- Horizontal installation
- Spout (length/height) 195/275 mm
- Overall customer rating:
4 Lemark Comfort LM3061C
Site editor's note: Tall faucet with good design. There is an additional spout for a water filter.
Price: from 7,096 rub.
This model contains only everything you need. The built-in aerator for tap and purified water mixes air. This reduces water consumption slightly and makes it more manageable and soft.
The height of the mixer is quite large, so you can easily wash large dishes. The kit includes all the necessary fastenings and connections. Installation will not take much time. Buyers in reviews praise this model even after several years of use.
Main characteristics for comparison:
- Single lever type
- There is an aerator
- Chrome coating
- Horizontal installation
- Spout (length/height) 209/240 mm
- Overall customer rating:
The best shower faucets
A special feature is the presence of a special watering can. Such devices must have a special switch installed. Some models have a spout, while others only have a watering can.
1 Grohe Grohtherm-1000 34143000
Site editor's note: Wall-mounted shower mixer from the popular manufacturer GROHE.
Price: from 13,640 rub.
One of the best models, the coating of which is developed using modern technology GROHE StarLight. This ensures a perfect surface shine even after years of use.
The device is equipped with a thermostat that will regulate the temperature and flow of water. The ceramic cartridge will significantly extend the service life of the mechanism. This model has a large throughput - about 23.2 l/min. To make installation easier, the kit includes S-shaped eccentrics.
Main characteristics for comparison:
- Double lever type
- There is a thermostat
- Chrome coating
- Vertical installation
- Maximum water flow 23.2 l/min
- Overall customer rating:
2 Lemark Pramen LM3318C
Site editor's note: A good option for a shower with a hygienic head.
Price: from 3,623 rub.
A fairly reliable Czech-made device, which is equipped with a hygienic watering can (for bidets with a push-button drive).
If you want a cute accessory at a low price, then choose Lemark products. The beautiful design will fit well into a stylish bathroom. Customer reviews are mostly positive. The product is quite reliable and equipped with all the necessary functionality. All necessary fastenings are included in the kit. The ceramic cartridge significantly increases the service life of the internal mechanism.
Main characteristics for comparison:
- Single lever type
- No thermostat
- Chrome coating
- Vertical installation
- There is a watering can
- Overall customer rating:
3 WasserKRAFT Donau 5351
Site editor's note: Reliable German version with minimal functionality.
Price: from 4,360 rub.
Do you have any doubts about which brand of faucet is best to buy? Then we recommend that you pay attention to German manufacturer WasserKRAFT. The excellent quality of materials and workmanship of the device ensures its long service life in your bathroom. The manufacturer provides a 5-year warranty for this model.
The product is equipped with a minimum of additional functions. The device can be installed hidden in the wall (the main elements are embedded, only the controls will be visible from the outside). The chrome finish will look good even after several years of use. If you have a limited budget and do not need additional functionality, then pay attention to the WasserKRAFT Donau 5351.
Main characteristics for comparison:
- Single lever type
- No thermostat
- Chrome coating
- Vertical installation
- No watering can
- Overall customer rating:
The best universal models
Universal ones usually differ in that they have a swivel spout. This way you can turn the faucet into the sink or bathtub. Despite this versatility, such products most often break due to frequent turns.
1 WasserKRAFT Aller 1062L
Site editor's note: Quality materials, nice design, popular brand.