This section presents electric boilers Evan 6 kW. They are suitable for heating residential buildings area of about 60 square meters(depending on the degree of insulation of the house), as well as for heating other rooms for various purposes the specified area. All boilers of this power are designed to operate in single-phase electrical network with voltage 220 V.
Models of electric boilers Evan 6 kW
If you want to buy an Evan electric boiler with a power of 6 kW, you need to choose from the following four models:
1. . This is the cheapest and easiest of model range boilers Evan. It has a round body and a separate 1-step control panel. Supplied with a cord and plug. Attaches to the wall in a vertical position.
2. . Unlike the EPO model, this boiler has more modern look- it has a white rectangular body, on the front panel of which there is a power button, a thermostat knob, and a heating indicator light.
3. . The main difference between this boiler and the previous two models is that it has a built-in circulation pump and 5-step smooth power control. Another difference is the electronic digital control panel. As a result of these improvements, this boiler costs significantly more than the previous two.
4. . This electric boiler has a 3-stage power adjustment and a membrane keyboard for control. Price-wise, it's significantly cheaper than the RX and is the best option for those who want to buy an inexpensive boiler with the ability to reduce power. The circulation pump is not included in the design of this boiler.
Electric boiler EVAN EPO 6 kW. Heated area: 60 m2. The price is for the boiler complete with a 1-stage control panel.
Electric boiler EVAN EPO 6 is a stationary electric heating device designed for heating residential, domestic, industrial and other premises.
All models of EVAN EPO electric boilers
More details |
BUY electric boiler EVAN EPO-2.5 (2.5 kW) for 6262.5 rubles |
||
More details |
|||
More details |
BUY electric boiler EVAN EPO-6 (6.0 kW) for 9337.5 rubles |
||
More details |
|||
More details |
BUY electric boiler EVAN EPO-7.5/380B (7.5 kW) for 11,520 rubles |
||
More details |
BUY electric boiler EVAN EPO-9.45, (9.45 kW), 380V for 12577.5 rubles |
||
More details |
BUY electric boiler EVAN EPO-12, (12.0 kW) for 13297.5 rubles |
||
More details |
BUY electric boiler EVAN EPO-15 (15.0 kW) for 15,270 rubles |
||
More details |
BUY electric boiler EVAN EPO-18, (18.0 kW) for 16,875 rubles |
||
More details |
BUY electric boiler EVAN EPO-24 (24.0 kW) for 17,460 rubles |
||
More details |
BUY electric boiler EVAN EPO-30, (30.0 kW) for 22987.5 rubles |
The possibility of use should be considered in the following cases:
As the main source of heat (if there is sufficient allocated electrical power and if it is impossible (or expensive) to connect to the gas distribution network;
- as a temporary source of heat for a period construction work and laying of engineering communications;
- as a backup or additional source of heat during emergencies;
Installing an electric boiler as a main or additional heat source in an existing or designed water heating system is not particularly difficult and, as a rule, does not require complex additional measures (for example, installing chimneys, foundations, window openings) subject to qualified connection in compliance with electrical safety requirements.
For preliminary selection required power electric boiler can be based on the calculation of 1 kW per 10 m2 of heated area. In premises corresponding modern requirements In terms of heat loss, the specific electrical power can be significantly lower.
The wide power range of EVAN EPO electric boilers from 2.5 to 480 kW allows you to solve heating problems for both small country house, so residential building or a production facility with an area of up to 4800 m2 or more.
Electric heating boilers EVAN EPO 6 can operate in heating systems with natural and pump circulation. Both water and non-freezing liquid can be used as a coolant. The EVAN company recommends DIXIS antifreeze for use.
Technical characteristics of the electric boiler EVAN EPO 6 kW
Electrical power: 6.0 kW
- Possibility of smooth regulation of coolant temperature in the range of 30-85°C
- Device efficiency, not less than 93%
- Double overheat protection
- Operating pressure in the boiler, no more than 0.3 MPa (3.0 atm)
- Test pressure boiler in production 0.5 MPa (5.0 atm)
- Pressure testing of the heating system with the boiler after installation, no more than 0.4 MPa (4.0 atm)
- Temperature of emergency sensor with self-reset 92±3°С
- Heating elements are made of of stainless steel
- Light indication of work
- Reliable performance when the supply voltage changes ±10% of the nominal value
- Guarantee period operation 18 months
Technical description of electric boilers EVAN EPO 6 kW
1 - body
2 - protective casing
3 - heating element
4 - cover
5 - emergency thermal switch with self-reset, thermostat sensor a
6 - outlet pipe
7 - inlet pipe
8 - thermostat sensor a (not visible)
9 - M8 clamp for zero protective conductor RE
Dimensions and weight of electric boiler EVAN EPO 6 kW
Height: 565 mm
Case diameter: 159 mm
Cover diameter: 220 mm
Length with connecting pipes: 270 mm
Connecting size of pipes: G 1¼"
Weight: 15 kg
Overall dimensions of the EVAN EPO remote control (height x width x depth) and weight:
1-stage 4-18 kW - 270x205x175 mm, Weight 3 kg
1-stage 24-30 kW - 280x205x175 mm, Weight 4 kg
3-speed 4-30 kW – 265x380x180 mm, Weight 6 kg
Technical characteristics of EVAN EPO 6 kW
Supply voltage: 220 V
Heated area, m2: 60
Cross-section of the supply cable core (copper), mm 2: 6,0
The design of EVAN electric boilers provides for the selection of the desired temperature regime depending on the air temperature in the room. For this purpose, boiler control panels are equipped with a connector "Connector X1" for connecting room thermostat. When using an air temperature sensor, the control circuit will automatically switch to work together with this sensor. To do this, the “Temperature” regulator knob on the boiler control panel must be set to the maximum temperature mark and all power levels must be turned on. Then the electric boiler will be switched on and off to maintain the temperature set by the room thermostat automatically.
When choosing a room thermostat, it must be taken into account that it must contain a changeover contact. The room thermostat must be connected to the boiler using a two-core cable with a cross section of 0.5 mm2.
EVAN EPO boilers turn off when the sensor contacts are closed.
Thermostats (with built-in air temperature sensor) for controlling EVAN boilers:
Electric boiler EVAN EPO-6 (6.0 kW), diagram and connection procedure.
The electric boiler EVAN EPO-6 (6.0 kW) is operated with a protection device installed in the fixed wiring. Before test switching on the boiler after connection, maintenance and (or) repair, you should make sure that the device has a neutral PE protective conductor.
Before turning on the electric boiler, make sure:
There is no break in the visible part of the neutral protective conductor;
There is no damage to the visible part of the electrical wiring insulation and the neutral protective conductor PE;
There are no visible coolant leaks from the device and heating system;
Lack of frozen coolant in the heating system;
Presence of coolant in the expansion tank.
Commissioning works include:
Connecting the boiler to the electrical network;
Filling the system with coolant;
Removing air from the heating system;
Bringing the pressure to normal in accordance with the requirements of this operating manual (when using an expanzomat);
Test run;
System adjustment and shut-off valves;
Before installing the boiler, check the correctness and quality of installation of the natural circulation heating system.
The heating system pipes must be positioned in such a way as to facilitate natural circulation coolant. In this case, the maximum coolant level should not exceed 30 meters to the boiler level ( operating pressure in the boiler not higher than 0.3 MPa).
If it is impossible or undesirable to achieve natural circulation of the coolant in the heating system, it is necessary to use a circulation pump.
The heating system must necessarily have an expansion tank communicating with the atmosphere. When using a membrane-type expansion tank, a safety valve rated for a pressure of no more than 0.4 MPa must be installed at the boiler outlet in front of the ball valve.
Since when triggered safety valve possible release of coolant or steam through it drainage hole, it is necessary to connect a drain to the sewer system.
Installed at the inlet and outlet of the boiler ball valves, used during dismantling, repair and maintenance device.
Installation of shut-off valves on the pipeline connecting the expansion tank to the heating system is prohibited!
The pressure testing of the heating system with the boiler after installation is no more than 0.4 MPa.
The boiler must be installed in a vertical position.
The control panel is mounted vertically at a height of 1.4-1.7 m from the floor on walls and structures in well-lit rooms.
Electric boilers of various classes, similar in electrical power:
More details |
BUY electric boiler EVAN EPO-4 (4.0 kW) for 7267.5 rubles |
||
More details |
BUY electric boiler EVAN EPO-7.5/220B (7.5 kW) for 11,520 rubles |
||
The budget model of the electric boiler EVAN EPO 6 class "Standard-Economy" is intended for heating country houses, dachas and cottages. Low price on the boiler is achieved due to the absence of a housing that combines the boiler and the control panel, while maintaining all basic characteristics and opportunities.
The required coolant temperature in the boiler is set by a built-in thermostat by smooth adjustment from 30 to 85 degrees. In addition, it is possible to connect an external thermostat, with which you can regulate the air temperature in the room. The module can be used as an external thermostat (except for EPO-2.5) remote control boiler GSM-Climate (Wi-Fi Climate), which allows you to regulate the temperature in the room from a distance, remotely control the operation of the boiler and monitor its health from GSM smartphone, tablet or PC.
The "TEMPERATURE" thermostat knob provides smooth adjustment of the heating temperature of the coolant, the boiler operating mode is long-lasting. When heating the coolant to the set temperature, the thermostat turns off the boiler and turns it on again after the temperature drops below the set point. For additional protection against overheating, they are equipped with a self-resetting emergency thermal switch, which, in the event of failure of the main thermostat, turns off the boiler when the coolant reaches a temperature of 92 degrees. The heating elements are made of stainless steel, which significantly increases their service life.
The required coolant temperature in the boiler is set by a built-in thermostat by smooth adjustment from 30 to 85 degrees. In addition, the boilers have the ability to connect an external thermostat, with which you can regulate the air temperature in the room. The GSM-Climate (Wi-Fi Climate) boiler remote control module can be used as an external thermostat, which allows you to regulate the room temperature from a distance, control the operation of the boiler and monitor its health.
Connection diagram for Evan EPO 6 boiler
Package Included:
- boiler 1 pc.
- control panel with board 155.012-03 (-04 for IIU EPO-M1-4) 1 pc.
- instruction manual 1 piece.
- set of fasteners (for PU EPO-M 1) 1 pc.
- individual packaging 2 pcs.
- contact on heating elements: for PU three-stage 7.5-18 2 pcs., for PU three-stage 24-30 3 pcs.
Technical characteristics of the electric boiler EPO 6
Manufacturer: Evan (Russia)
Article: 11025
Power, kW: 6
Power levels: 1
Number of heating elements, pcs: 1
Heated area (approximately), sq. meters: 60
dimensions boiler, mm: 500x200x160
Boiler weight, kg: 7
Overall dimensions of the remote control, mm: -
Remote control weight, kg: -
Inlet, outlet pipes, inch: 1.0
Possibility of connecting a remote control module for the boiler GSM-Climate or Wi-Fi Climate: yes
Mains voltage, V: 220
Acceptable phase voltage, V: 160 - 250
Rated current frequency, Hz: 50 ± 1
Coolant temperature control range, °C: from 30 to 85
Frost protection: no
Diagnosis of stuck contactors: no
light and sound alarm: No
Warranty: 18 months
Warmos-RX-2 is new model electric boiler of the COMFORT class with the highest energy efficiency.
Since 2018, Evan has been producing an updated model of the Warmos-RX 6 electric boiler.
The updated model Evan Warmos-RX 6 uses electronics used in electric boilers of the NOVATOR series, which provides the possibility of forced limitation maximum power. In addition, it became possible to automatically select the boiler's heating output in increments of 1% from the nominal, the minimum sufficient to maintain the specified coolant temperature or the specified air temperature. The power supply ensures stable operation of the device at unstable network voltage (from 160 to 260 Volts). Even if the indicators of one or two phases at once electrical circuit go beyond these limits, the control system will continue to operate stably while remaining in good working order.
Warmos-RX 6 can operate in 2 modes: maintaining the set coolant temperature and maintaining the set air temperature in the room. Low noise levels in normal operation are ensured by maintaining optimal pressure in the system and the quality of the built-in circulation pump, as well as the absence of noise during operation of triacs (unlike electromagnetic relays and contactors).
The boiler is intended for heating private houses, cottages, dachas, small and medium-sized businesses.
Can be used in conjunction with other heat supply sources as the main or backup.
Refers to low temperature boilers with maximum temperature heating the coolant not higher than 90°C and the maximum excess pressure of the coolant not exceeding 0.3 MPa.
The main type of coolant is water. If there is a danger of the system defrosting due to unstable power supply, it is permissible to use antifreeze liquids, certified as a coolant for boilers.
The amount of energy consumption is controlled by semiconductor switches with liquid cooled. The seven-stor type operating power control ensures quiet operation. New circuit solutions ensure stable operation during voltage surges.
Tubular heating elements (heating elements) with a shell made of high-quality corrosion-resistant steel are reliably sealed, the design eliminates steam formation at the boundary with the coolant. Automatic temperature maintenance by changing power consumption. Intelligent algorithm for selecting the level of average power consumption in 1% increments. This eliminates sudden jumps in thermomechanical stresses that occur when the Warmos-RX-2 boiler is turned on or off.
The required coolant temperature in the boiler is set by a built-in thermostat by smooth adjustment from 8 to 85 degrees with an accuracy of 1 degree. In addition, it is possible to connect an external thermostat, with which you can regulate the air temperature in the room. The GSM-Climate boiler remote control module can be used as an external thermostat, which allows you to regulate the room temperature from a distance, remotely control the operation of the boiler and monitor its health from a GSM smartphone, tablet or PC.
Advantages of the electric boiler Evan Warmos-RX-6
- Provides adjustment of coolant temperature in the range from 8 to 85°C with an accuracy of 1°C
- Equipped with a connector for connecting an air temperature sensor or a GSM/Wi-Fi Climate module for remote control of the boiler from a GSM smartphone
- Provides automatic temperature maintenance by changing power consumption
- Electronic non-contact activation control heating elements
- The heating elements are made of stainless steel Backer (Czech Republic)
- Stepped heating of heating elements ensures increased service life
- Possibility of limiting the specific surface load of heating elements for safe use non-freezing coolants
- Equipped with a reliable built-in circulation Wilo pump RS 15/5
- Increased energy efficiency of operation, thanks to a smooth 5-step change in power consumption
- Operates stably at low (up to 160 V) and high (up to 260 V) network voltage
- Protections provided:
from high (3 bar) and low (0.7 bar) pressure
from overheating - emergency self-resetting sensor (operation temperature - 92 ± 3°C)
from overheating of power actuators
from erroneous power connection by the owner - Intuitive display that shows everything necessary information
- Quiet operation thanks to seven-actor power control type
Device electric boiler Evan Warmos-RX
The boiler contains:
Installation panel (1). The coolant enters the device through a combined pipe (11) located in the lower left corner of the device, which has both external thread G3/4, and the possibility of connecting by soldering copper pipe with an outer diameter of 20 mm.
The coolant is driven by a circulation pump (2).
Passing through the pipeline (3), it cools the semiconductor elements and enters the heat exchange tank (4) in thermal insulation, containing three heating elements, and returns to the system through the upper outlet pipe with internal thread G1 1/4.
The desired outlet temperature, controlled by a sensor (7), as well as the power consumption limit are set on the control and display panel (6). The excess pressure in the heat exchange tank must be in the range from 0.07 MPa (at lower pressure the operation of the circulation pump becomes unstable) to 0.35 MPa (the maximum operating pressure of the volume compensators required in closed systems). It is controlled by a pressure sensor (8).
The protection, independent of the microcontroller and cooled semiconductor elements, is represented by a self-resetting thermal switch (9) connected to the contactor coil circuit, through the main contacts of which the power supply currents of the heating elements pass.
The connection of phase and neutral wires must be made through screw cable clamps (10), protective wire PE - through a bolt clamp located in the left top corner device.
Contents of delivery:
1. electric boiler 1 pc.
2. instruction manual 1 pc.
3. cuff 1 piece
4. individual packaging 1 pc.
Electric boiler connection diagram Evan Warmos-RX 6
Technical characteristics of the electric boiler Warmos-RX 6
Article: 12436
Manufacturer: Evan (Russia)
Power, kW: 6
Number of heating elements, pcs: 3
Voltage, V: 220
Heated area (approximately), sq. meters: 60
Overall dimensions, mm: 633х373х235
Weight, kg: 26.0
Maximum hourly energy consumption, kW*h:
at 60% power limit: 4.6
at 100% power limit: 7.6
Maximum current, A: 31.5
Self-diagnosis of faults: yes
Automatic switching to the operating phase: yes
Thermal insulation of the body: yes
Pipe thread, inch: inlet – external G 3/4, outlet – internal G 1 1/4
Efficiency: 99%
Permissible phase voltage, V: 160 - 260
Rated current frequency, Hz: 50 ± 1
Coolant temperature control range, °C: from 8 to 85
Coolant temperature indication range, °C: from 0 to 99
Range of permissible coolant pressure, MPa: from 0.07 to 0.35
Coolant pressure indication range, MPa: from 0 to 0.6
Coefficient useful action,%: not less than 99
Number of power stages: 3
Power levels, kW: 2.0/4.0/6.0
Installation method: wall
Warranty: 24 months
Advantages:
light weight 7 kg;
Equipment:
electric boiler EVAN EPO 6;
technical certificate.
Description
Electric boiler EVAN EPO 6 (220V)
The electric boiler EVAN EPO 6 with a power of 6 kW is suitable for heating small buildings, private houses, cottages with an area of no more than 60 m2 and a ceiling height of 2.7 m. One of the most budget-friendly in its EVAN line and belongs to the Standard-Economy class. Affordable price is due to the absence of an external casing, so the boiler and control panel are separated. The narrow body saves space. The device can be supplemented with an external thermostat to regulate indoor air heating. Can be used as a main or backup heat source, suitable for constant use. Mounted on the wall at a height of 1.4 - 1.7 m from the floor strictly vertically.
Advantages:
Heating elements made of durable stainless steel, which extends the life of the device;
built-in thermostat regulates temperature in the range from +30 to +85 degrees;
protection against overheating (presence of a self-resetting thermal switch);
light weight 7 kg;
compactness (dimensions of the boiler excluding the remote control are 500x200x160 mm).
Equipment:
electric boiler EVAN EPO 6;
technical certificate.
You can order the electric floor-standing boiler EVAN EPO 6 at a discount and conveniently pay for it in the Bigam online store. You can leave a request on the website or call toll-free hotline and chat with our manager. We have several types of payment: cash and several types of non-cash payments. Delivery is carried out to any city in the country up to transport company, by courier or pickup from our company store. Our own authorized service center carries out full diagnostics, repairs and maintenance under warranty of any equipment or tool.