Gas boiler buderus logano g234 50. Quiet and reliable operation

Modern universal boiler concept Buderus Logano G234 WS

Low temperature heating boiler according to DIN EN 297 with continuously variable boiler water temperature control without base temperature (minimum boiler water temperature)

Four certified boiler sizes with a nominal heating output of 38-55 kW

The heating boiler is designed to operate on natural gas H and liquefied gas P / B/P

Boiler design with perfectly fitted sections made of high-quality cast iron

Tested and reliable heating boiler with cast iron heat exchanger and atmospheric gas burner

Combines with adjacent Logalux ST and Logalux SU water heater tanks from the Buderus program

Combines with various control systems from the Buderus program

High standardized utilization rate (93%) and low emissions of harmful substances

Quiet and reliable operation

Atmospheric gas burner with pre-mixing without fan

Heating mode without additional noise reduction measures

The minimum required pressure of network natural gas at the inlet is 10 mbar (for Logano G234 boilers with a power of 38, 44, 50, 55 kW).

Simple and convenient control

Control functions coordinated with the plant hydraulics

Easy setup of all control system functions (Push and Turn principle)

It is possible to expand the configuration of all control systems for additional modules

Quick installation, commissioning and maintenance of the Buderus Logano G234 WS boiler

A system for quickly installing the heating circuit, adapted to the corresponding hydraulic circuit, for connection to the boiler or wall mounting

Convenient connection of Logalux ST and Logalux SU water heater tanks with a capacity of 150, 160, 200 and 300 liters to the boiler thanks to the boiler-water heater connecting pipeline with loading pump and check valve

Burner design without moving parts

Easy conversion of the burner to other types of gas

Floor-standing gas cast iron boiler Buderus Logano G234WS (AW.50.2-Kombi) 7738503643 - 50 kW without control system

TeploSpetsTsentr, LLC

Spartakovskaya Square, building 14, building 1, right entrance, office 306, 105082 Moscow

Itek, LLC

st. Storozhevaya, 4, building 3, 111020 Moscow

Termostudiya, LLC

Varshavskoe highway 25 A, building 6, 117105 Moscow

NIK engineering (branch Pelteh), LLC

10 Dokukina st., building 41, 129226 Moscow

Rainbow-service, LLC

st. Azovskaya, 15-A, 117452 Moscow

Pelteh, LLC

st. Kotlyakovskaya, 3, building 1, 115201 Moscow

Termosystem, OOO

Irkutskaya, 11/17 office center "Shchelkovsky", 107497 Moscow

Company PROTON+, LLC

st. Kolontsova, 15, 141009 Mytishchi

LEX plus, LLC

Festivalnaya st., 2, 142152 Fedyukovo

Company PROTON+, LLC

st. Sovetskaya, 90, 143430 Nakhabino, Krasnogorsky district

BazisTeploStroy, LLC

Rublevo-Uspenskoe highway, 28 km from MKAD, no. 50/1, 143032 Gorki 10

Teplosfera IC, LLC

Privokzalnaya str., 12, 601010 Kirzhach

The online store website delivers any product using its own delivery service.

Before you start using the product, check whether your idea of ​​the product corresponds to its actual characteristics. It is extremely rare, but there are cases of errors in product descriptions on the site. All main characteristics are indicated in the operating instructions supplied with the product. You can refuse the product if, upon receipt of the product, you find a difference in its description on the website and instructions. Try to find out this issue before you start using the product, and we will promptly replace the product or return the money.

Please note that due to the multiple increase in fines for illegal parking, delivery of orders to office buildings in the absence of free parking spaces or access to the territory is not guaranteed. We reserve the right to ask to meet our driver before entering the building.

	Order amount up to 5,000 ₽	Order amount from 5,000 ₽ to 50,000 ₽	Order amount from 50,000 ₽
Moscow	730 ₽	390 ₽	For free
Saint Petersburg	730 ₽	390 ₽	For free
beyond the Ring Road	730 ₽ + 30 ₽/km from the Ring Road	390 ₽ + 30 ₽/km from the Ring Road	30 ₽/km from the Ring Road
To the cities of the Moscow region
Lyubertsy urban district	770 RUR	440 ₽	90 ₽
Mytishchi urban district	770 RUR	440 ₽	90 ₽
Reutov urban district	770 RUR	440 ₽	90 ₽
Khimki urban district	770 RUR	440 ₽	90 ₽
Krasnogorsk urban district	880 ₽	540 ₽	190 ₽
Balashikha urban district	880 ₽	540 ₽	190 ₽
Dolgoprudny urban district	880 ₽	540 ₽	190 ₽
Leninsky district	1030 ₽	690 ₽	340 ₽
Odintsovskii district	1030 ₽	690 ₽	340 ₽
Dzerzhinsky urban district	1030 ₽	690 ₽	340 ₽
Korolev urban district	1070 ₽	740 ₽	390 ₽
Lytkarino urban district	1070 ₽	740 ₽	390 ₽
Ivanteevka urban district	1170 ₽	840 ₽	490 ₽
Lobnya urban district	1170 ₽	840 ₽	490 ₽
Podolsk urban district	1230 ₽	890 ₽	540 ₽
Domodedovo urban district	1230 ₽	890 ₽	540 ₽
Pushkinsky district	1280 ₽	940 ₽	590 ₽
Schelkovsky district	1280 ₽	940 ₽	590 ₽
Urban district of ZATO Vlasikha	1480 ₽	1140 ₽	790 ₽
City district of ZATO Krasnoznamensk	1480 ₽	1140 ₽	790 ₽
Zhukovsky urban district	1480 ₽	1140 ₽	790 ₽
Krasnoarmeysk urban district	1480 ₽	1140 ₽	790 ₽
Fryazino urban district	1670 ₽	1330 ₽	970 ₽
Losino-Petrovsky urban district	1670 ₽	1330 ₽	970 ₽
Istra urban district	1800 ₽	1470 ₽	1090 ₽
Ramensky district	1800 ₽	1470 ₽	1090 ₽
Noginsky district	1800 ₽	1470 ₽	1090 ₽
Chernogolovka urban district	1970 RUR	1640 ₽	1290 ₽
Bronnitsy urban district	1970 RUR	1640 ₽	1290 ₽
Elektrostal urban district	1970 RUR	1640 ₽	1290 ₽
Zvenigorod urban district	1970 RUR	1640 ₽	1290 ₽
Dmitrovsky district	2230 ₽	1890 RUR	1540 ₽
Solnechnogorsk district	2230 ₽	1890 RUR	1540 ₽
Chekhov urban district	2230 ₽	1890 RUR	1540 ₽
Naro-Fominsk urban district	2530 ₽	2190 ₽	1840 ₽
Sergiev Posad district	2530 ₽	2190 ₽	1840 ₽
Urban district of ZATO Voskhod	2530 ₽	2190 ₽	1840 ₽
Pavlovsky Posad urban district	2680 ₽	2340 ₽	1990 RUR
Elektrogorsk urban district	2680 ₽	2340 ₽	1990 RUR
Delivery to the specified cities is carried out through a transport company. Below is the cost of delivery to the transport company terminal in Moscow
Volokolamsk district	730 ₽	390 ₽	For free
Voskresensky district	730 ₽	390 ₽	For free
Yegoryevsk urban district	730 ₽	390 ₽	For free
Zaraysk urban district	730 ₽	390 ₽	For free
Kashira urban district	730 ₽	390 ₽	For free
Klin urban district	730 ₽	390 ₽	For free
Kolomna urban district	730 ₽	390 ₽	For free
Lotoshinsky district	730 ₽	390 ₽	For free
Lukhovitsy urban district	730 ₽	390 ₽	For free
Mozhaisk district	730 ₽	390 ₽	For free
Ozyory urban district	730 ₽	390 ₽	For free
Ruza urban district	730 ₽	390 ₽	For free
Stupino urban district	730 ₽	390 ₽	For free
Serebryanye Prudy urban district	730 ₽	390 ₽	For free
Taldomsky district	730 ₽	390 ₽	For free
Shatura urban district	730 ₽	390 ₽	For free
Shakhovskaya urban district	730 ₽	390 ₽	For free
Zvezdny Gorodok ZATO urban district	730 ₽	390 ₽	For free
City district ZATO Molodezhny	730 ₽	390 ₽	For free
Orekhovo-Zuevo urban district	730 ₽	390 ₽	For free
Dubna urban district	730 ₽	390 ₽	For free
Serpukhov urban district	730 ₽	390 ₽	For free
Pushchino urban district	730 ₽	390 ₽	For free
Protvino urban district	730 ₽	390 ₽	For free
Kotelniki urban district	730 ₽	390 ₽	For free
Roshal urban district	730 ₽	390 ₽	For free
Likino-Dulyovo urban district	730 ₽	390 ₽	For free
To Russian cities to the transport company
To the transport company terminal	730 ₽	390 ₽	For free
Pickup - free

Delivery terms:

The purchased goods are delivered to the entrance (cottage gate or private house gate). If reasons arise that prevent the vehicle from arriving, delivery is carried out to a place as close as possible to the place of planned unloading of the goods without violating traffic regulations. If the territory of the delivery destination provides for paid entry, the Buyer must compensate for the cost of entry of the vehicle.

Climbing to the floor

You can use the Goods Lifting service. This service is paid. Our company's employees will deliver your order directly to your apartment, regardless of whether your building has an elevator. Prices for lifting, check with the manager.

Can I use a third party shipping company for delivery?

Yes, this option is possible in agreement with your personal manager. In this case, you will only pay for delivery in Moscow, but our responsibility for the safety of the goods will be limited to the moment the order is transferred to the transport company you have chosen.

Transport companies:

ATTENTION! Within 7 (seven) days after receiving the goods, you have the right to refuse the purchase without giving reasons, if you have not used the goods and have fully preserved its packaging and presentation.

The transferred funds are returned to your bank account or in cash (Depending on the payment method) within 5-30 business days (the period depends on the Bank that issued your bank card).

If the client refuses to deliver the goods on time and of proper quality, the client will compensate for delivery costs.

All products sold on our online store website have certificates of conformity, warranty cards and instructions in Russian.

Above the specified limits, an additional fee of 30 rubles is charged. for 1 km.

The prices indicated on the website are final and do not require additional payments under standard delivery conditions. All taxes are included in the price of the product.

Possible payment methods

	Cash: Payment in cash to the courier for delivery in Moscow, Moscow Region, or for pickup at the store’s office.
	Cashless payments: Payment for goods by bank transfer is possible for all legal entities and individuals. After receiving your order, you will be sent an invoice by email. The invoice is valid for payment within three banking days. After paying the invoice, we ask you to contact the manager and inform about payment of the invoice or send a payment order by email [email protected] so that we do not cancel the reservation at the warehouse and check the date and time of delivery with the manager.
	By bank card to the courier or in our office: We accept the following types of cards for payment: Visa, Visa Electron, Mastercard, Mastercard Electronic, Maestro. If you want to pay for the goods by credit card, please indicate this in the comments to your order. You can pay by card when receiving the goods to the courier or at the delivery office, through a mobile terminal.
	1. After the manager confirms the availability of the goods, transfer the required amount in rubles to our account4100 1837 5253 09 via Yandex.Money wallet. 2. If you don’t have a wallet, transfer money to our account through instant payment terminals or in banks in your city,servicing Yandex.Money payments. After payment send to [email protected] payment notice.

Warranty

1. The manufacturer's warranty period for the equipment (with the exception of some series indicated separately) is 24 months from the date of commissioning of the equipment, but not more than 27 months, respectively, from the date of purchase of the equipment by the end Consumer.
2. The warranty period for components and assemblies replaced after the expiration of the warranty period, as well as for spare parts, is 12 months from the date of installation. The date of installation of the spare part must be recorded in the warranty card for the equipment.
3. For the Manufacturer to provide a warranty, compliance with the following conditions is mandatory:

• Installation and commissioning of equipment must be carried out in compliance with current building codes and regulations (SNiP), state standards (GOST), local norms, as well as the instructions for installation and operation of the Equipment Manufacturer and the relevant regulatory and technical documentation of the Russian Federation;
• Installation, commissioning of equipment and commissioning work must be carried out by specialists authorized to perform such work, or by organizations authorized by the Manufacturer for installation and/or warranty service of the relevant type of equipment, the list of which is indicated on the websites bosch-climate.ru and/or www .buderus.ru;
• Availability of a certificate of commissioning and/or a note on installation/commissioning of equipment in the warranty card;
• After 12 (twelve) months from the start of operation of the equipment, within 2 months it is necessary to carry out scheduled maintenance of the equipment with the appropriate mark in the warranty card by a service organization authorized by the Seller and/or Manufacturer;
• Prior to installation, the equipment should be stored in a warm, dry place.

1. Warranty claims will not be accepted in the following cases:

4.1. Structural changes have been made to the equipment without agreement with the Manufacturer/organization authorized by the Manufacturer to carry out such work.

4.2. Parts manufactured by others are installed on the equipment.

4.3. The rules for installation and operation of the Manufacturer’s equipment are not followed.

4.4. Repairs or tampering with the equipment were carried out by specialists who were not authorized to repair the relevant type of equipment;

4.5. The malfunction is a consequence of:

• connecting equipment to communications and systems (electricity supply, water supply network, etc.) that do not comply with GOST, SNiP requirements and instructions for installation and operation of equipment;
• use of energy and coolants that do not comply with GOST, SNiP requirements and instructions for installation and operation of equipment;
• penetration of foreign objects, substances, liquids, animals, insects, etc. into the product.
• receipt of mechanical damage during the delivery of equipment by the Consumer from the point of sale to the place of installation and operation, which caused the equipment to malfunction;
• improper operation of related equipment technologically related to the Manufacturer's products, including short circuits, voltage drops (fluctuations) in the power supply network, various types of failures and interruptions (in violation of established standards and regulations) in the functioning of other engineering networks and communications on site installations;
• equipment malfunction due to air pollution due to excessive dust deposition, due to aggressive exposure to vapors, oxygen corrosion, chemical, electrochemical or electrical influences, installation of equipment in unsuitable premises, or continued use of the equipment after detection of a defect.
• acts of force majeure (fire, flooding, natural disasters, etc.), as well as intentional or careless actions and negligent handling of the Consumer or third parties.

1. The warranty does not apply to:

• cases where wear parts such as burner nozzles, emission reduction burner tips, magnesium anodes, fuses, seals, combustion chamber lining or flame contact ignition and flame control devices (and the like) fail due to normal wear and tear.
• cases when, due to any malfunction, the equipment was dismantled without the consent of the Manufacturer/organization authorized by the Manufacturer to carry out such work.

1. The manufacturer has obligations under the Consumer Protection Act.
2. When making a complaint about the quality of a product, the Consumer is obliged to provide access to the equipment to check its quality. Equipment must undergo maintenance at service centers at least once a year. In case of violation of this requirement, the Manufacturer has the right to refuse warranty repairs and replacement of equipment. The period for troubleshooting should not exceed 45 (forty-five) days.

For your safety:

Installation, commissioning, repair and maintenance must be carried out only by specialists authorized to perform such types of work.

For reliable and safe operation of the equipment, it is recommended to install filters on the gas and water supply (hot water supply), a dielectric separating insert on the gas connection line, mandatory installation of a filter on the return pipeline of the heating system, and it is also recommended to use an uninterruptible power supply or voltage stabilizer, the use of systems water treatment in the heating system. Ensure that the equipment is suitable for the system to which it is connected or to which it is to be installed. The parameters of the fuel and electrical network coincide with those specified in the operating instructions.

The Manufacturer's warranty obligations have been explained to me and are understandable.and I fully approve.

Description

Buderus Logano G234-50 WS (RU TOP) is a gas floor-standing boiler equipped with an atmospheric burner and intended for use in premises for various purposes. Using natural gas of group H or liquefied gas of groups P / B / P as fuel, this unit easily copes with the tasks of heating or hot water supply in country houses, warehouses and industrial premises with a high efficiency - up to 90-92%.

Buderus Logano G234-50 WS (RU TOP) is a 2017 model with a new modern design. The side panels and control system housing are finished in classic blue, while the front and top panels are a rich, deep dark color. The size of the boiler has been reduced, which allows it to be placed in almost any convenient place without damaging the interior.

Some functional and technical features of the boiler have also been improved. The Logamatic MC110 automation of the EMS Plus standard allows you to control the heating circuit using a weather-dependent mode and expand the functionality through additional modules. The improved SAFe burner control will allow the boiler to reach a new level of efficiency and reliability.

Advantages of the gas boiler Buderus Logano G234-50 WS (RU TOP)

Quiet and reliable operation. The boiler has an atmospheric gas burner with pre-mixing without a fan. It is highly reliable and operates extremely quietly. For comfortable operation of the Buderus Logano G234-50 WS (RU TOP) no additional noise reduction measures are required. The boiler operates stably with the specified performance indicators using natural gas with a supply pressure of up to 10 mbar.

Simple and convenient controls. An important innovation of this model is the presence of modern weather-compensated automation: Logamatic MC110 standard EMS Plus, as well as a system controller RC310 or BC30E with a touch-screen and full-text menu. The display provides easy-to-read text, symbols, status and error information. There is a simple step-by-step and intuitive setup of all functions of the control system - understanding the basics of controlling the Buderus Logano G234-50 WS (RU TOP) boiler is not difficult.

Possibility of modernization. The boiler configuration can be expanded with additional options:

• KM200 module for remote control via the Internet;
• mixing module MM100;
• cascade module MC400 with the ability to control up to four boilers;
• For complex systems, it is possible to connect professional automation of the new generation Logamatic 5000.

Quick installation and commissioning. The system for quick installation of the heating circuit Buderus Logano G234-50 WS (RU TOP) is adapted to the corresponding hydraulic circuit. Thanks to this, installation of the boiler is quick and does not require lengthy preparation stages. The water heater tank is easily connected to the boiler via a connecting pipeline with a loading pump and a check valve. The burner design does not contain moving parts; if necessary, it can be adjusted to other types of gas.

High build quality. Production is carried out in Germany using original developments and the best materials. At all stages of creating finished products, strict quality control is carried out, which ensures a high level of quality Buderus Logano G234-50 WS (RU TOP). The emission level of harmful substances is extremely low and meets modern European standards.

You can find out additional information about this equipment and order a floor-standing gas boiler Buderus Logano G234-50 WS (RU TOP) on our website or from the sales department.

Buderus Logano G234 WS-50 kW Floor-standing gas boiler, cast iron, atmospheric burner

Logano G234 WS

• Boiler block design with perfectly matched sections
• Boiler sections made of high quality cast iron GL 180 M
• Combustion chamber closed on all sides
• Intensive heat transfer of heating surfaces thanks to special fins
• Easy installation and maintenance thanks to simple design
• Fully automatic operation with electric ignition, no additional gas consumption required for ignition
• To make it easy to connect gas to the boiler at the back, there is a gas pipeline under its casing.
• Thermal insulation 80 mm thick. reduces heat loss to a minimum
• The heating boiler is completely assembled together with the casing - this saves time and installation costs
• Compact dimensions - an advantage when carried through openings and when placed in a boiler room
• Various combinations with control systems and cylinders - to suit every need
• Large selection of additional equipment for quick installation, adapted to a specific boiler

Gas burner with pre-mix

• Fully automatic burner with electric ignition
• Ionization flame control and double magnetic valve
• The Venturi tube of a gas burner ensures mixing of fuel with air. During the combustion process, many small individual flames are formed without a high-temperature core. Therefore, in such gas burners the combustion temperature is significantly reduced. In addition, the short flame of these fireplaces easily breaks away from the burner rod, reducing the heat load on it

Supply

• Heating boiler - for operation on natural gas H, with thermal insulation and boiler casing - 1 box
• Conversion kit for liquefied gas P and B/P (additional equipment) - 1 box
• Control system (optional) - 1 box

Flue gas temperature / chimney connection
The required pressure is for all boiler sizes a minimum of 3 and a maximum of 10 Pa.
For more precise adjustment and maintenance of draft in the chimney, as well as for organizing ventilation of the chimney itself, it is recommended to install and adjust an additional air regulator (draft limiter). The cross-section of the additional air regulator depends on the effective height and cross-section of the chimney.

Flue gas shut-off valve
If desired, a flue gas shut-off valve can be purchased as an optional extra. A flue gas shut-off valve installed before the draft breaker is more effective than one installed after it.

Installations with underfloor heating
In floor heating systems using oxygen-permeable plastic pipes (DIN 4726), it is necessary to install a heat exchanger between the heating boiler and the floor heating system.

Preparing hot water
The heating boiler can work with any water heater tank. Combinations of the boiler with tanks of the Logalux ST/SU series have particular advantages.

General provisions

• For heating boilers that must be equipped with a flue gas monitoring system according to the FeuVO of the relevant federal state, accessories can be supplied
• For version B11 (without flue gas monitoring system), the boiler may only be installed in rooms that have the required ventilation to the atmosphere and also have a self-closing and sealed door, for example in boiler rooms
• For version B11 BS (with flue gas monitoring system), the heating boiler can be installed in apartments or similar places
• To ensure the functioning of the boiler, all connections must be made in the places specified for them
• When installing a gas heating boiler operating on liquefied gas below ground level, it is recommended to install a second solenoid valve. A switchgear for controlling the solenoid valve can be supplied as an option
• In installations with underfloor heating, with several heating circuits, as well as in installations with large water volumes, it is necessary to install a mixer to regulate the heating circuits, based on local operating conditions.

Inspections
To ensure environmentally friendly and trouble-free operation, we recommend regular inspections of the boiler and burner.

When installing the heating boiler, the minimum distances shown (indicated in parentheses) must be observed. For ease of installation, servicing and maintenance, it is necessary to maintain the recommended distances from the walls.
The room for installing equipment must be protected from the cold and have good ventilation. In addition, care must be taken to ensure that the combustion air is not contaminated with dust or halogenated hydrocarbons. Halogenated hydrocarbons of all types are found, for example, in aerosol cans, solvents and cleaners, varnishes, paints and adhesives.

Modern universal boiler concept

• Low temperature heating boiler according to DIN EN 297 with continuously variable boiler water temperature control without base temperature (minimum boiler water temperature)
• Four certified boiler sizes with a nominal heating output of 38-55 kW
• The heating boiler is designed to operate on natural gas H and liquefied gas P / B/P
• Boiler design with perfectly fitted sections made of high-quality cast iron
• Tested and reliable heating boiler with cast iron heat exchanger and atmospheric gas burner
• Combines with adjacent Logalux ST and Logalux SU water heater tanks from the Buderus program
• Combines with various control systems from the Buderus program
• High standardized utilization rate (93%) and low emissions of harmful substances

Quiet and reliable operation

• Atmospheric gas burner with pre-mixing without fan
• Heating mode without additional noise reduction measures
• Stable operation on natural gas with supply pressure up to 10 mbar

Simple and convenient control

• Control functions coordinated with the plant hydraulics
• Easy setup of all control system functions (Push and Turn principle)
• It is possible to expand the configuration of all control systems for additional modules

Fast installation, commissioning and maintenance

• A system for quickly installing the heating circuit, adapted to the corresponding hydraulic circuit, for connection to the boiler or wall mounting
• Convenient connection of Logalux ST and Logalux SU water heater tanks with a capacity of 150, 160, 200 and 300 liters to the boiler thanks to the boiler-water heater connecting pipeline with loading pump and check valve
• Burner design without moving parts
• Easy conversion of the burner to other types of gas

Equipped with an atmospheric burner, the Buderus Logano G234-50 WS floor-standing cast iron gas boiler with a power of 50 kW is intended for heating residential and non-residential buildings and premises with a total area of ​​up to 500 square meters. meters (a more accurate calculation of the maximum area is carried out by designers of heating and gas supply systems). The concept of the boiler operation is such that it can operate in heating mode without maintaining the base temperature (lower temperature of the boiler water), which makes it possible to seriously optimize the entire process of system operation and seriously increase the actual efficiency of the boiler (up to 93%). If necessary, it can be converted from natural gas to liquefied gas and vice versa. To do this, it is necessary to additionally purchase an internal gas pressure monitoring device (regulator) for each physical state of the fuel. The structure of the Buderus Logano G234-50 WS boiler is shown in Figure 1.

Equipped with a cast iron heat exchanger, the Buderus Logano G234-50 WS boiler is additionally equipped with Logalux water heater tanks, which are mounted next to the boiler. It is not possible to install the boiler on top of the tank. Thanks to the atmospheric burner, the requirements for gas quality indicators are reduced, which allows you to create a gas-air mixture of the required parameters even at very low pressure in the gas pipeline.

Installation and Operation Basics

The Buderus Logano G234-50 WS boiler is installed exclusively in boiler rooms and furnace rooms equipped with a window opening with an area of ​​at least 400 sq.cm. Also, the premises must be equipped with an active ventilation and smoke duct with a cross-sectional area of ​​150 sq.cm, and have a room volume of at least 15 cubic meters. If a filter and (or) grille is installed on the inlet, then the cross-sectional diameter must be increased to the next standard size in the range.

It is prohibited to install the boiler in walk-through combustion chambers. Also, the room must be well protected from the cold (maximum permissible boiler operating temperature + 5°C). When constructing the foundation of the combustion area, in addition to the volumetric requirements, the following distances must be maintained (excluding the heater tank):

All automation and operating principles of the Buderus Logano G234-50 WS boiler with an open combustion chamber are quite simple. However, during installation, connection to networks and first start-up, under no circumstances should you install the boiler yourself. Entrust the work to specialized service centers and certified specialists. Also, during installation and operation, make sure that only original Buderus brand parts are used.

Where is the Buderus Logano G234-50 WS boiler used?

Country houses and cottages. The powerful Buderus Logano G234-50 WS boiler can easily cope with heating a cottage or country house with an area of ​​up to 500 sq.m. subject to excellent insulation. To organize hot water supply, it is possible to pair the device with an indirect heating boiler and an automatic three-way tap.

Warehouses, industrial premises, shops, service facilities, catering. The cast iron boiler Buderus Logano G234-50 WS is also perfect for semi-industrial purposes, when the construction of a mini-boiler house is not economically viable, and feeding the heating network from a centralized heating system is impossible, difficult or impractical.

If there is insufficient power, it is permissible to use a cascade system of Buderus Logano G234-50 WS boilers with an integrated smoke exhaust system. In this case, one of the boilers will be almost constantly in reserve, which will make the heating process guaranteed uninterrupted and protect against possible depressurization in the event of malfunctions during sub-zero temperatures.

Atmospheric gas boiler Buderus Logano G234-50 WS, G20