A good owner's garden should not only produce a harvest, but also look attractive. And to make flower beds and beds look more neat, you need to use borders or other types of fencing.
Previously, such fences were predominantly wooden and, therefore, short-lived. Even with regular painting, wood absorbs moisture, rots and swells, moreover, mold or harmful microorganisms can develop in it. Finally, under the influence of sunlight it can simply crack. But modern plastic fencing does not have such disadvantages - these are reliable and durable structures with a long service life, which not only perform fencing functions, but can also become a decoration of the entire site.
Advantages of plastic panels for beds
Such panels have a number of advantages that distinguish them from other types of borders.
Thanks to all these advantages plastic fencing are very popular among gardeners and flower growers.
Main types of plastic fencing
The modern range of borders for beds and flower beds is quite large, so everyone can choose the option that suits them best.
Border tapes
The popularity of plastic borders is primarily due to ease of installation, affordable price and excellent aesthetic characteristics. Tapes are sold in rolls, the length of which depends on the specific manufacturer. The thickness of the material varies between 0.5-2 mm, while the height of the fences can range from 10 cm to 28 cm. When purchasing, you need to choose a specific width of the material based on the plants that are planted on the territory: the higher they are, the wider it should be be a curb tape.
Pay attention! As for density, it is better to give preference to the plastic whose rigidity axis runs along the top edge.
This material allows you to easily construct earth structures various forms and sizes. It is also worth noting that tapes are divided into several groups according to texture and color (corrugated, wavy, etc.). These parameters do not in any way affect the practical side of application, but they play a very important role in terms of decorativeness.
Ways to use border tapes
- Products less than 10 cm wide can be used to limit the construction of embankment paths. Such tapes allow you to construct paths of any shape and prevent the material from scattering.
- Wider fences (up to 25 cm) are used for beds, especially sloping ones, so that moisture will be retained in the desired area and not spread beyond its limits.
- Using tapes up to 30 cm wide, shrubs and grasses that reproduce by root shoots are protected.
Also, such fences can be used to completely seal greenhouses. To do this, the tape is placed around the entire perimeter of the greenhouse, so that pests and weeds do not penetrate into it.
In addition, tapes are used to protect decorative flower beds (including multi-tiered ones), small artificial ponds, fruit trees, seedlings, and paths. Finally, products with maximum width are used to create compost pits.
How to install border tape
The installation procedure, as noted above, is not complicated. The main working material is the tape itself. You will need scissors for cutting, and liquid nails or a soldering iron for fastening. It is advisable to do the work with an assistant.
First, a trench is dug around the perimeter of the bed for the border (the depth depends on the specific width of the fence). To protect plants from the cold, it is desirable that the tape be wide. The borders are equipped with plastic pegs, which need to be dug in at the corners, as well as along the perimeter, at the intervals specified in the instructions, and then stretch the tape itself between them. After this, the trench is covered with earth. As you can see, everything is extremely simple.
The remaining material should be rolled up and placed in a dry place - it may still be useful. With the onset of winter, it is advisable to cover the border with something so that it does not lose its appearance. You should not step on the fence - it may not support the weight and crack.
Video - Border tape
"Garden board"
Speaking about the beds from plastic panels with your own hands, one cannot fail to mention the “Garden Board”. The fact is that, for all its advantages, curb tape is not very strong, so it can be damaged by strong force. mechanical impact. But the strength of the “Garden Board” (which is panels up to 15 cm wide, which can reach 300 cm in length) is higher.
Plastic “Garden Board”
Such panels are equipped with special grooves and protrusions, which significantly simplifies and speeds up the connection procedure. Using these products, you can fence both garden beds and, for example, children’s sandboxes, recreation areas, etc. The surface of the “Garden Board” is smooth, the panels themselves can withstand heavy loads, and they are extremely difficult to scratch.
The color of the fence varies from brown to white. Thanks to this, the panels can be used when arranging various decorative compositions on the site.
Pay attention! In closed beds and greenhouses, such a fence is indispensable, since you can easily attach film or iron frame. Plastic panels prevent the beds from falling apart and are resistant to temperature and humidity changes.
The only disadvantage of the “Garden Board” can be considered its rather high cost. As for installation, it takes just a few minutes and does not require any special skills.
Table. Installation of plastic panels
| Steps, no. | Brief description |
|---|---|
|
|
First, the kit is unpacked, after which the individual elements are connected to each other using special protrusions and grooves. |
|
|
Next, the fence is mounted on the garden bed and nailed to the ground using pegs (included in the kit). |
|
|
Actually, that's all. All that remains is to cover the holes with plugs to make the fence look more aesthetically pleasing. |
After installation, the structure will effectively hold the bed within the required limits.
Flexible border “Garden Constructor”
Another type of border tape, which makes it possible to build beds of any size and configuration. It is a set of plastic elements that are connected into a circuit and closed.
The image clearly shows that thanks to such elements you can build the most bizarre flower beds (even consisting of several levels).
Installation of the structure is extremely simple: required quantity elements are connected to each other using special fasteners and installed. At the bottom of each element there is a sharp protrusion that ensures reliable fixation. The installation procedure is shown in more detail in the video below.
Video - Installation of the “Garden Constructor”
Fencing for garden beds made of plastic mesh
Plastic fence nets have been used in gardening and floriculture for many years, because, firstly, they are no less attractive and durable than metal ones, and secondly, they are resistant to corrosion. Sometimes sports fields are fenced with such a mesh, because the structure can easily withstand direct hit ball.
This mesh is attached in the same way as a metal one (as can be seen in the image), but it is important that it is well tensioned - this will ensure greater reliability.
Fencing for garden beds: buy or make it yourself?
Plastic panels can be purchased at any specialized store. But if this is not possible, then you can resort to improvised means - for example, build a border from plastic bottles. This “good” accumulates in every home over time, but not everyone knows that bottles can be used to make an original and decorative border.
However, there are several rules that must be followed when working.
Pay attention! Also, plastic bottles can serve as ready-made miniature flower beds, but larger volume products (5-6 liters) will be required. In this case, you should make a hole on the side of the bottle for flowers.
As a conclusion
Plastic is a very promising material for the construction of garden fences. It is quite cheap, but reliable and durable. A huge range of panels allows you to choose the most suitable option, which is why they are becoming increasingly popular and, most likely, it will only grow over time.
To decorate a vegetable garden near the dacha, you can use various combinations crops, flowers and fencing. To process the beds, all kinds of available tools and materials are used. For example, a fencing for a garden bed made of plastic boards looks very interesting. Such designs have a number of advantages, and the main ones are low price and beautiful appearance.
Advantages of plastic boards for garden beds
Until recently, the most commonly used material for decorating garden beds was natural board. Its undeniable advantage is its naturalness and practicality of use. But unfortunately, such a board will not last long, and after a certain period it will rot. Therefore, it makes sense to consider the option of making beds from plastic panels with your own hands.
The plastic is very durable and practical material, and this allows you to create many different shapes and modifications in the design of a house garden bed. An undeniable advantage of the plastic design is the ease of installation, which any summer resident, including women, can handle.
Designs for fencing beds with PVC panels have many various types and are presented in a very large assortment. Such plastic products are more common among summer residents for fencing garden beds than, for example, wooden framing. They have gained such popularity not only because of their low cost, but also because of their practicality in use, durability and many other advantages that wooden and stone models do not have.
It is important to note that PVC board is 100 percent capable of retaining water that gets into the bed fencing structure. Plastic products have also large number additional advantages that have already been appreciated by many summer residents.
The advantages of plastic fencing include:
Types of fencing
Plastic products for garden beds are made from special material, which even when heated does not release harmful substances into the soil, so owners can be confident in the environmental friendliness of the crops, vegetables and fruits, flowers, etc. modern models They also have improved characteristics.
Such fences allow the owner of the site to purchase environmentally friendly pure material. It does not change under the influence of moisture and sunlight. The structure will never crack from frost or melt under the sun, so such devices can be used in any climate zone of the world.
But this is not all the advantages that artificial material has. It will never be damaged by insects, unlike wood, which can crumble over time under their influence. Such material is also not subject to rotting and corrosion, the spread of mold, etc.
High beds made of plastic panels can be made without special effort, the main thing is to buy plastic. Is there similar material on the market? huge amount, and it has many different variations. There are basically four main types of plastic products:
- plastic curb tape;
- garden designer - practical products;
- PVC panels;
- plastic mesh fence.
Some designs look like natural materials and successfully imitate them. For example, there are options that imitate wood and stone, and are free of all the disadvantages.
Features of border tape
Plastic fencing is very often used to fence the perimeter of a plot, beds, flower beds, etc. Since the material is highly flexible, its use allows you to create the outline and shape of the desired type. On the market you can find border strips, the height of which can be from 10 to 50 centimeters. This size will be enough to create several raised beds on the property.
In such structures, the earth does not crumble during watering or during precipitation. In this case, the roots of the plants will be well protected from the influence of water.
If the project area requires the allocation of large area on the beds, as well as to reduce the growth areas of other crops, then the right decision would be to buy wide ribbons for flower beds and flower beds, but for other purposes it is better to install narrow structures.
Anyone can install such a tape, even without much practice in this area. Any garden owner can cope with this task. Should always be included detailed instructions for assembly, as well as an additional set of fasteners.
To install, you first need to dig a small ditch into the bed. Then you need to stretch the tape along the trench, and it is advisable that two people do this work. When the tape is in place in the trench, it should be equipped with pegs on the sides for fixation. Then all that remains is to fill the entire form with soil and press well. For integrity, the structure must be fastened with staples. It can fulfill its intended purpose for several years. If the need arises, the plastic elements can be dismantled or rearranged to any other location.
Many owners of summer cottages prefer flexible border options for products. With such ribbons you can create unique designs and shapes. They are very suitable for forming a curved configuration. Moreover, their cost is low, and large selection material allows you to make any design. What if you make each side of the curb? different colors, then it will look bright and impressive.
To obtain a calm atmosphere in the garden, you should use dark colors plastic. And to emphasize a certain detail you need to set bright shades, for example, yellow or red.
Garden constructor
The most popular type of construction for vegetable gardens, flower beds and plots of land is a garden set. Due to its elasticity, such a device makes it possible to create unique aesthetic shapes, flower beds and beds of any size - both small and large - near the house. This design consists of plastic parts held together in a certain way. Basically, the manufacturer provides instructions that describe the entire process.
As a result, it is possible to assemble a single structure with solid sides, into which soil is poured and a bed is formed. The main advantage of such models is their versatility. With a garden constructor you can create both large and small buildings, unlike garden board. It holds the soil very well within the garden bed and also does not allow moisture to pass through.
Such structures have very little weight, so there are no restrictions on the type of soil, etc. They can be installed in areas with loose and loose soil. Garden constructors are also actively used for installing several tiers of beds. To create a special look, plastic panels can be bent or shifted relative to each other.
The installation itself is not a difficult process. It is enough to simply put all the elements together, connect them with the fasteners from the kit and install them in the required place.
Options for framing of PVC panels
Besides classic options plastic fencing, there are many others custom designs and forms of structures. For example, a structure with imitation stones can be made into a garden labyrinth and used for various purposes, for example, for fencing:
Such structures have special protrusions and recesses at the bottom, making it easy to mow the grass near them. Fences prevent the proliferation of weeds near the flower bed and have aesthetic appearance, are not conspicuous and easily sink into the ground. Basically, such structures have several elements, the height of which varies around 8 centimeters, and total length- about 3 meters.
There are other simulation options:
- bricks;
- metal fence;
- vine fence;
- forged fences;
- in the form plastic flowers etc.
Wood polymer
Classic plastic structures are not the only material that is used in the construction of beds near the dacha. Many owners country houses and land plots increasingly began to be used wood-polymer composite(DPK).
Prefabricated structures have several important advantages:
Beds made from WPC panels conduct heat well, their color resembles natural wood, as well as the natural texture of wood. But nevertheless, such material is not ideal and has its disadvantages. If it comes into contact with moisture for a long time, it may begin to absorb it, and mold will appear over time. It is recommended to treat products with special substances so that over time they do not begin to deteriorate under the influence of ultraviolet radiation.
As you can see, plastic structures for beds can be varied. There are also craftsmen who make homemade fences from plastic bottles. This option will be free, but not as beautiful as purchased special panels.
Beautiful, level beds, neatly fenced, not only please the eye, but also bring benefits. They can be made from anything that comes to hand. From old slate, plastic panels, curb tape, tires and so on. This article contains more than 20 ways to create beds with your own hands. Plus photos and videos with step-by-step instructions.
Luxury, or a way of growing?
Usually, beginners believe that growing lettuce and herbs can be done without beauty. Why bother with garden borders, when there is mass on the site daily work? But inexperienced summer residents are unaware that neatly fenced beds with paths between them are not just a design element. In practice, they reduce the amount of labor required by the gardener. Judge for yourself:
- weeds will not enter the fenced bed from the side of the path or adjacent rows. This significantly reduces the work required to remove unwanted plants;
- after another rainstorm there is no need to rake up the washed-out soil;
- the higher the bed, the easier it is to weed and fertilize;
- crawling pests will not get through the fence;
- if the fence is wide and stable, you can put something on it, for example, take it out into the fresh air indoor flowers. Or sit down while weeding;
- You can build a mini-greenhouse above the garden bed at any time;
- For the functioning of “warm beds”, a fence is required. She holds thermal energy decomposing compost, wood and paper and directs it to the roots.
There is only one drawback to arranging flower beds and beds. This needs to be done. In order to save your time and energy, we will suggest several inexpensive, practical options.
Slate border
Specialty stores are full of various kinds fences for flower beds. But savvy summer residents prefer to build beds from scrap materials. What do we have lying around on our site? Old slate? Let's put him to work!
If you have slate sheets lying around, you need to cut them to width with a grinder and dig a wave-shaped fence around the perimeter of the flowerbed or bed.
- plus: efficiency;
- minus: slate, when interacting with water, releases substances harmful to plants. Brittle material, may crack or split.
Edge made of roofing materials
Instead of slate, the remaining ones from roofing works metal tiles or corrugated sheets. Pre-cut corrugated board with a grinder will not be enough to just dig in; it needs to be reinforced with wooden slats.
- plus: strength;
- minus: if the corrugated sheet is of poor quality, it will need to be repainted.
Wooden fencing
One of the most common options, such as slats, boards and beams, is found in almost every dacha. You can also use clapboard, slab, picket fence, cut or uncut board.
Tip: If you are fencing a piece of land with a board, then you need to make several supports around the perimeter and firmly bury them in the ground.
For areas registered in rustic style, hemp or wattle from willow branches are perfect. Or small logs dug vertically into the ground.
- plus: the tree looks elegant and natural. You can show your imagination and build something special, for example, a multi-tiered flower bed;
- minus: under the influence of moisture, the wood can become covered with fungus or rot. Such borders need to be constantly looked after, treated with an antiseptic, and repainted.
Tip: To increase the service life of slats or logs, you need to dip the bottom part in bitumen mastic or wrap tightly with roofing material.
Brick patterns
A classic of the genre - flower beds fenced with bricks on the edge. The bricks can simply be laid around the bed, half dug into the ground. Some will have two or three rows, while others will have elegant brickwork.
- plus: durability;
- minus: old brick looks unaesthetic. You may have to spend money on a new one.
Brick beds in a greenhouse
Metal border
In order to make a metal box you will need sheets, screws and corners. It is better to use galvanized steel, which will last longer.
- plus: strong, reliable fencing;
- minus: in summer, under the influence of the sun, the metal heats up and damages the root system of plants. The metal is susceptible to corrosion. It needs to be repainted periodically.
Stone fences
For those who prefer environmentally friendly raw materials, fences made of stone, for example, made of cobblestones of approximately the same size, are perfect. They are used to build a fence, fastening the stones with mortar. It turns out beautiful and noble.
- plus: durability. No need to paint;
- minus: painstaking work. A heavy fence can sag under its own weight, this needs to be monitored.
Concrete fencing
Can be dug into the ground concrete blocks. If you want beds to last forever, then it makes sense to build them in the same way as the foundation of a house. Put together the formwork and fill it with concrete.
- minus: cash investment.
Concrete block beds in a greenhouse
Nets with filling (pergons)
Stones can not only be held together with mortar, but also poured in random order into specially prepared grids. Pergons are called bulk fences and can be filled with pebbles, broken glass, and colored glass. Professionals make real works of art out of this type of fencing by filling the mesh with materials different sizes and colors, laying out patterns from them. Any plant in such a noble frame will sparkle like a diamond.
- plus: no maintenance required. Durability;
- minus: cash investment.
Plastic panels - in action
Are there plastic panels left after finishing the kitchen? Dig them into the ground and you will get a wonderful fence. Plastic borders do not overheat in the sun, do not collapse or rust. In addition, they can be used to decorate beds of unusual shapes, round, wavy or triangular.
- plus: you can rearrange it as soon as you decide to change the design of the site. Easy installation. It is enough to dig a little and secure with pegs;
- minus: the plastic panels are thin and fragile, it is better to remove them for the winter.
Beds made of plastic panels for a greenhouse
Border tape and other plastic products
Border tape- this is a fence in the form of a green or green tape brown with wavy or smooth surface. Can be purchased at any flower shop. Tape, like other types of decorative plastic fencing, has a number of advantages.
- Does not rot, does not become moldy, does not rust.
- Sold at an affordable price.
- Easy to install.
- Elastic and comfortable. Can be cut and given any shape.
- Resistant to ultraviolet radiation and low winter temperatures.
Another interesting option– installation of purchased decorative fences. They are absolutely different shapes and flowers. For example, in the form of tulips with green grass or imitating a picket fence. It has the same advantages, but it is better to remove it for the winter.
In addition, the “Labyrinth” border is popular - a narrow plastic fence stylized as a stone. And the plastic panel “Garden Board” up to 3 meters long and up to 15 cm high, durable and easy to install.
Tires - there is no limit to imagination
Tires are most often used to frame flower beds. From them you can create any multi-tiered structure and even a flower bed in the form of a tea cup and teapot. If you cut the tires in half and dig them into the ground, you will get a wavy fence that children love to jump on.
- plus: Easy installation. Space for creativity. The highlight of the site.
Bottle sides
One of the original options. To construct such a fence, you need to collect about a hundred one and a half liter bottles of the same shape. Wash them, dry them, fill them with sand or earth. Install by digging alternately throughout the entire bed. If you also paint the bottles water-based paint, then you will get nice, elegant flower beds. The same can be done from glass bottles.
- plus: efficiency;
- minus: glass breaks easily.
It takes a lot of work to collect so many plastic bottles!
Beds made from plastic bottles
A personal plot can be not only a place of relaxation, but also a source of good harvest. To do this, many residents equip a vegetable garden or greenhouse. For beautiful design beds use all kinds of fencing, and modern trend are fences for beds made of plastic panels, which can be purchased in different designs and colors.
Design solution for beautiful garden design personal plot using plastic fencing
Reasons for the popularity of plastic fencing
When forming flower beds or flower beds, all kinds of available materials were previously used, such as brick or wood. Moreover, the first material was most often used for decorating flower beds, and the second - for beds. The wooden fencing of the beds has outlived its usefulness, it is short-lived, over time the boards dried out, cracked, and under the influence of precipitation the moisture content of the wood increased, which caused favorable conditions for the development of fungus and mold.
Wooden fencing is not always aesthetically pleasing and durable
Durable, plastic fences for garden beds do not have such disadvantages. The advantages include:
Heat resistance. Plastic easily tolerates both low temperature conditions in winter, and high in summer.
High strength. The fence holds its shape well, preventing the soil from leaving the garden bed.
Harmlessness. Plastic is an artificial material; it does not pollute the environment, since it does not contain harmful toxic substances.
Security from destruction by mold, mildew or insects.
Color fastness. The color of the panels does not change under the influence of temperatures and exposure to sunlight.
Ease of installation and maintenance. Installation of plastic fencing does not require special skills. The plastic is easy to clean; just spray the panel with water from a hose.
Low cost.
Thanks to these advantages, plastic board for beds is recognized as a practical and durable material, and flower beds and beds can now accept the most unusual shapes various heights and colors. To get high beds from plastic panels, buy a panel that is sufficiently high in height; specialized stores offer several size options.
Plastic fencing for flower beds
Which material will be better and cheaper
Fences for garden beds, depending on the material used, can have a variety of shapes and sizes, and the color scheme will allow you to match the material to any existing interior.
Polyvinyl chloride (PVC)
The advantages of this material have made PVC fences widely used. Border strips, plastic boards, nets, and flexible fences are made from PVC. Such products have sufficient rigidity to maintain the required shape and height of the bed. Some of them, for example, a garden board or a garden constructor, are used to create sandboxes and playgrounds; plastic mesh has found application in fencing construction and repair areas and sports complexes.
PVC fencing for garden beds is much cheaper metal structures, while not inferior to them at all. They are also durable, because during operation they do not corrode and do not fade under the influence of direct sunlight.
Example high fence PVC
On our website you can find contacts construction companies that offer. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.
Polycarbonate
Material received wide application in the construction of greenhouses and greenhouses, it can also be used in the formation of beds, as in open area, and inside greenhouses.
The advantages include high mechanical strength and impact resistance, the ability to withstand high temperatures environment. Using thinner polycarbonate sheets, you can form round or oval beds; denser material may burst when bent. Polycarbonate has several color options, but the coloring is very sensitive to sunlight; after 1.5-2 years of use, the color becomes dull.
Also, the disadvantages include poor frost resistance: over time, under the influence of low temperatures, the material becomes more fragile, and can collapse even from a slight blow.
Blue polycarbonate fencing
Metal-plastic
Metal-plastic fences are durable steel frames coated with a layer of zinc and polymer to protect the metal from corrosion. The size of the panels can be adjusted to fit any garden bed; the only disadvantage of this material is the inability to form round shapes. This minus is compensated by the alternative of receiving early harvest, since, being a good heat conductor, metal fencing quickly warms the soil in spring, which promotes early planting of seedlings and rapid growth plants.
Metal fences do not need to be removed from the beds for the winter, which saves time in the spring for re-dividing the sowing zones.
Metal-plastic fencing is strong, reliable and durable
Modern fencing for flower and vegetable beds
Depending on the shape and functional affiliation flower beds and beds are used various types fencing:
border tape;
plastic panel (plastic board, garden board);
plastic mesh;
flexible fencing.
Each material has its own characteristics that make it preferable for a particular type of work.
Video description
For a clear overview of garden bed fencing, watch the video:
Border tape
Due to its rigidity, the tape is used to form beds of any shape and size, as well as height; depending on the material used, the height of the bed can vary from 20 to 50 centimeters. The flexibility of the border tape allows you to design flower beds of any geometric shape: round, oval, square, rectangular - as well as in the form of irregular round or polygonal shapes.
Flower bed using border tape
Border tape prevents the bed (flower bed) from blurring the edges during rain, holds the soil well and does not change shape during use. The color of the ribbon can be any, but, as practice shows, buyers are more attracted to shades of brown and green.
The tape is easy to install; the kit includes plastic pegs for fixing the tape and instructions. Thanks to different heights tapes can be used to form multi-tiered flower beds, which is important for decoration alpine slides and other design solutions on a personal plot.
Border tape allows you to make multi-level flower beds
Plastic panels
Fencing for beds made of plastic panels has one important advantage compared to curb tape - the plastic board has greater rigidity, which allows it to withstand impacts directed at it without deforming.
The length of the “garden board” reaches 3 meters, the height is no more than 15 cm. The panels are attached to each other using the “groove and key” principle, which allows for quick installation. Plastic panels have found widespread use not only in fencing beds and flower beds, but also for decorating children's sandboxes and playgrounds. The color range of the panels varies from white to dark brown.
Plastic boards tolerate rapid temperature changes well, which allows them to be used as a basis for a greenhouse when the temperature outside and inside the structure is different.
A bed with a base for a greenhouse made of plastic panels
Plastic mesh
Plastic mesh has found wide application in replacing metal mesh fencing; unlike the latter, it is not subject to corrosion. Mesh is used for fencing sports grounds, construction projects, delimitation of personal plot zones. At correct installation The mesh provides sufficient structural rigidity and reliability of the fence.
Delineation of zones with plastic fencing on a personal plot
Flexible fencing
This type of fencing is also called a garden constructor. Being a type of border tape, it has the same advantages - it makes it possible to form beds of various shapes, creating multi-level structures of any size and height.
Round sandbox fencing
Flexible fencing of beds consists of single elements that, when connected to each other, form a single strip, with the possibility of forming any shape of bed or flower bed. The base of each element has a pointed tip that is driven into the ground and securely holds the tape in place.
Connection of individual elements of flexible fencing
Plastic fencing is beautiful and economical
A plastic fence for garden beds is an excellent solution for decorating beds and flower beds in your garden. Various designs And color solutions will help satisfy the demand of any owner, bringing to life the most complex design solution.
From this article you can learn the features of such products as beds made of plastic boards: scope of application, pros and cons of structures made on their basis, types of plastic fencing, as well as their technical and performance characteristics. The reader will become familiar with the specifics of plastic panels, borders, strips, design products, as well as fences made from wood-polymer composite.
Enclosing structures for garden beds are presented in a wide range on the market in finished form. Plastic products are the most common and in demand among owners of summer cottages. This success is due not only to the low cost, but also to the practicality, durability of these structures, as well as many additional advantages, due to which they outperform wood, metal or stone.
One of the main advantages of plastic is its low cost.
Pay attention! A polyvinyl chloride (PVC) board is capable of 100% retaining moisture received by the soil during watering or rain inside the structure.
Why is it profitable to buy plastic fencing for flower beds and beds?
Plastic products are characterized by versatility and a lot of advantages, which are appreciated by many summer residents.
Advantages of plastic products:
- practicality - products have light weight, which allows them to be used even on loose soil. On top of a bed made of a solid plastic board, you can pour a fairly high layer of soil. If necessary, the dimensional parameters of the sides, in particular the height, can be increased by adding additional parts;
- aesthetics and a wide choice of designs are available to customers various options borders or plastic fences, on the basis of which you can create beds of unusual curved shapes;
- resistance - plastic products are not susceptible to negative influence corrosion, they remain in their original form for many years, without reacting to moisture and other negative environmental factors;
- the ability to retain color for a long time - products made from high-quality atmospheric plastic are not subject to fading in the sun. Even under prolonged exposure to ultraviolet rays, plastic elements will retain their original color and shape;
- wide scope of application - a wide range of products with different configurations and colors allows you to support any exterior of the house and create a unique one in the yard landscape design. Plastic structures used for zoning the yard, forming decorative fences to highlight a bed or sidewalk path, as well as to focus attention on individual objects;
- simple installation system - installation and dismantling of products does not cause any difficulties, and the structures themselves are mobile and can be used repeatedly.
Types of garden fencing for flower beds and plastic beds
Plastic bed structures are made from a special material that does not release toxic substances into the soil even when heated. Modern products have improved characteristics. Thanks to this, the owner of the site can buy fences for vegetable beds who are not afraid of high or low temperatures.
Pay attention! When exposed to frost, structures do not become cracked, but straight sun rays are not able to melt them. Therefore, plastic beds can be used in any climatic conditions, without fear that they will spoil.
The artificial origin of the material is also associated with some advantages. Firstly, insects cannot damage the products because they are not attracted to them. Secondly, plastic is not subject to processes such as rotting or corrosion. Thirdly, the material does not have favorable conditions for the development of mold.
You can buy designs for plastic garden beds in any specialized store; the market offer includes several categories of products:
- plastic border tape;
- flexible fencing called garden constructor;
- “Garden board” panels made of polyvinyl chloride;
- fencing in the form of a plastic mesh.
There are many variations of plastic fencing for garden beds on sale; you can buy these types of products in any color and size. Some types of structures realistically imitate natural materials, such as wood or stone, without having their disadvantages.
Features of plastic borders for beds in the form of a tape
Plastic fencing in the form of a tape is widely used by summer residents to organize beds and flower beds on the site. Due to the flexibility of the material, the products allow you to create designs with outlines of various shapes. There are varieties on sale, the width of which varies between 0.1-0.5 m. This height is quite enough to create raised beds on the territory.
The plastic tape protects the embankment from being washed away by water when the garden is watered or heavy rain falls. In such conditions root system plants will remain in their places, it is reliably protected from damage by streams.
Useful advice! If it is necessary to limit the growth of bushes on a site, for these purposes it is recommended to buy a plastic border for large-width beds; for zoning lawns, organizing flower beds and ornamental vegetable gardens, as well as forming embankment paths, it is more advisable to use narrow tapes.
The process of installing curb tape does not require experience or special skills. Any summer resident can cope with this task. The product comes with manufacturer's instructions detailed description procedures and a set of stakes for fixing the curb. To install the tape, just dig a shallow trench around the perimeter of the future bed. Then the tape should be tightened; it is advisable that this manipulation be performed by two people.
After the tape is placed in the trench, stakes are installed on the sides to secure it in the required position. All that remains is to fill the ditch with earth and compact it thoroughly. To make the bed structure continuous, you should connect the edges of the tape with staples using a stapler. Such a bed can last for several years. If necessary, it can be easily removed from the ground and moved to another place.
What fences you can buy for beds in the form of ribbons: features of the range and prices
Landscape designers and owners of summer cottages give preference to border strips for the reason that this type products has increased flexibility. Using plastic borders, you can create unusual flower beds and beds of bizarre shapes; tapes are great for forming curved lines. The price of the material is low, and the extensive range opens up new design possibilities.
By purchasing ribbons of different widths, you can create multi-tiered beds or flower beds on your site, which, due to their decorativeness and compactness, are in high demand among summer residents. Products are available in various colors. A multi-tiered bed design will look more impressive if the sides of each tier have a different shade.
Average prices for curb tape:
| Product name | Manufacturer brand | Product Features | Price, rub./roll |
| B-15/9 | Protect | corrugated, brown/khaki | 234 |
| B-20/9 | corrugated, brown/khaki | 299 | |
| B-30/10 | smooth, brown/khaki | 657 | |
| B-50/10 | smooth, khaki | 1099 | |
| B-20/30 | smooth, brown color | 1315 | |
| B-20/30 | smooth, khaki | 1440 | |
| B-30/30 | smooth, brown color | 1950 | |
| B-30/30 | smooth, khaki | 2175 | |
| B-1000.2.11-PP | Standardpark | smooth, black | 810 |
| B-300.8,54,5-PP | carved, black | 840 | |
| B-1000.2.11-PP | smooth, green color | 950 | |
| B-1000.2.11-PP | smooth, brown color | 950 |
Useful advice! To create a calm atmosphere in the area, it is recommended to use ribbons of dark colors. To place accents around certain objects, it is better to use bright borders, for example, orange, yellow, red.
Beds made of plastic boards: product specificity
Despite the fact that curb tape has many beneficial properties, it is not capable of becoming an alternative to rigid fencing. The design of beds made of PVC panels can withstand high pressure soil, a random gift of a shovel or other garden tools while processing the garden. This type products is called “Garden Board”.
Externally, the products look like panels. Their length may vary, but the maximum limit for this indicator is 3 m. The width of the board is no more than 15 cm. The end parts of the boards have fastenings and grooves that significantly simplify and speed up the process of assembling the beds. Thanks to this system, structures of any size can be created.
The assembly of beds from plastic boards is carried out taking into account the manufacturer’s instructions. The set of products, in addition to the panels, includes stakes made of plastic. To construct a bed, it is enough to connect the boards together using protruding fasteners and grooved recesses. After assembly, the product is installed on the ground and fixed with plastic stakes that are driven into the ground. At the end of this process, decorative plugs are installed at the fastening points to prevent soil from getting into these holes.
At what price can you buy ready-made plastic beds for the garden and how to use them
Plastic boards are used for the construction of flower beds and garden beds. In addition, this type of product can be used for landscaping local area, fencing the sandbox on the playground, an area intended for recreation, lawns and other objects. The panels are highly durable. The surface of the products is smooth.
Sets of fencing for garden beds made of plastic panels can be purchased ready-made. Manufacturers offer dozens of colors, so summer residents have the opportunity to create interesting compositions. The products are not afraid of temperature changes and prevent soil erosion. The only disadvantage of such beds is their high cost.
Pay attention! Plastic garden boards can be used as fencing for greenhouses and greenhouses. The panels are suitable for installing the frame part and are able to withstand the load of the entire structure.
Average prices for beds made of plastic panels:
| Dimensions, cm | Weight, kg | Price of a colored product, rub. | Price of gray product, rub. |
| 200x70 | 12,5 | 2760 | 2500 |
| 200x80 | 13 | 2840 | 2545 |
| 200x90 | 13,5 | 2910 | 2610 |
| 200x100 | 14 | 3000 | 2680 |
Garden constructor
A garden set is one of the types of fencing for garden beds made of plastic. This type of product makes it possible to show your imagination and build a beautiful decorative vegetable garden or flower bed on your summer cottage, of absolutely any size and shape. A garden set is a set of plastic parts that are connected in a certain way. As a rule, the manufacturer's instructions, which are included in each package, describe this entire process in detail.
As a result of the assembly, a solid structure is obtained in the form of a side, which is used to form a bed and fix the soil. Main advantage garden designer lies in its versatility. Unlike garden boards, the design elements allow you to create both large and small fencing on the site, depending on the needs of the owner. Finished design perfectly retains the soil within the garden bed, as well as moisture, necessary for plants for development.
Pay attention! The products are lightweight, so there are no restrictions regarding soil conditions. Such beds can be installed in areas with loose or loose soil.
The garden constructor is successfully used to create multi-tiered structures. To give a bed or flower bed an unusual appearance, you can form curved lines or achieve asymmetry in shape (to do this, it is enough to move the tiers relative to each other). The installation process is extremely simple: just buy plastic beds from required quantity, connect the parts together using fasteners and install them on site.
Related article:
Interesting design ideas summer cottage and greenhouses. Using scrap materials to create an unusual design beds
Price of a garden designer for beds:
| Product size (height/length), cm | Product color | Price, rub. |
| 15x300 | brown | 760 |
| 15x300 | green | 760 |
| 21x300 | brown | 840 |
| 21x300 | terracotta | 860 |
Unusual options for fencing for beds made of plastic panels
In addition to standard plastic fencing, there are many product options with unusual design. For example, a garden labyrinth consists of plastic elements that imitate real stones. The products are gray in color. Despite its lightness, this plastic fencing is durable and resistant to negative weather factors.
The garden labyrinth has a wide range of applications; it is used for zoning various objects on the site:
- flower beds;
- beds;
- and decorative reservoirs (ponds);
- flower beds;
- paths;
- landscape design elements;
- lawns.
The labyrinth border looks discreet and does not catch the eye; it will optimally fit into the space of any summer cottage. Sections made of plastic easily go deep into the soil. Most often, a kit consists of several elements. Their height is 0.08 m, and the total length of the set is 3 m.
Pay attention! The garden labyrinth has a special ledge and recesses, thanks to which you can mow the grass into the beds without interference. At the same time, all vegetation on the border of the garden is protected from the growth of weeds.
There are other options for plastic fencing with imitation:
- bricks;
- metal fence with interesting colors;
- forged fences with openwork design;
- colored picket fence;
- wicker fence made of vines.
Meet and decorative fencing in the form of plastic flowers and other objects.
Features of beds made of WPC: characteristics and advantages of products
Many summer residents resort to building beds from boards made from wood-polymer composite (WPC).
Such products have several significant advantages:
- A simple assembly and disassembly system that uses a special fastening system.
- Durability inherent in all polymer products.
- Aesthetic appearance - products made from wood-polymer composite imitate real wooden board. The material lends itself well to the dyeing procedure, so there are many color variations on sale.
- The ability to create flower beds and beds of unusual shapes.
- Smooth surface of products.
- The opportunity to achieve savings in the construction of beds by purchasing WPC panels instead of expensive materials, which are superior in characteristics to ordinary wooden boards.
- Simple care system and practicality.
Beds made from WPC panels are characterized by high quality and support the colors of natural wood species, as well as their natural texture. The material has few disadvantages, but they still exist. With prolonged contact with moisture, the structure tends to absorb it, which can cause mold to form.
Pay attention! It is recommended to treat the products using a special protective composition to prevent the destruction of panels under the influence of ultraviolet radiation.
Technical characteristics of fencing for beds made of WPC
For the manufacture of WPC panels, a mixture consisting of plastic and wood flour is used, so this type of material can be called relatively natural when compared with PVC products. After mixing the components, a polymerization process occurs, as a result of which the panels acquire new properties, so designs of such beds are widely used in suburban construction.
Product specifications:
| Characteristic | Indicator |
| Material density, kg/dm³ | 1,4 |
| Tensile elongation percentage, % | 0,5-1 |
| Bending resistance, MPa | 25-60 |
| Impact strength level, kJ/m² (Charpy) | 3-4 |
In the process of assembling the beds, two types of parts are used: the board itself and the hinge with a rotating mechanism. To fix the structure, there are special pegs that connect the elements together, and are also used to increase the height if it is necessary to increase this figure.
The mesh, as a fencing for garden beds, is not as popular as previous product options. But it also has its advantages. This type of fencing will come in handy if children are playing with a ball in the area. A soft plastic net stretched between the supports will protect the plants from damage.
Features of assembling beds from plastic panels with your own hands
To build beds from WPC panels you will need a set of boards and logs that will be used as posts. In addition, you should stock up on decorative plugs that will prevent debris and dirt from getting into the rotary hinge mechanism, as well as corners that will cover the outer corners.
Technology for making beds:
- Wood-polymer composite boards are cut into pieces required size. The length of the segments is selected taking into account the dimensions of the future bed.
- The height of the corner posts should be 0.2 m higher than the upper limit of the fence, the difference in the same indicator for the internal posts is 0.5 m.
- The boards are fastened together in a seamless manner. A similar result is achieved by installing one panel into another as tightly as possible. Gaps are not allowed. To save money, it can be used as support posts wooden bars or metal corners.
Useful advice! Fastening the panels can be done under different angles, making it possible to experiment with the shapes of the beds. The minimum acceptable angle is 60º.
After assembly, the box made of WPC panels is fixed on the corner supports so that the free section of the support, exceeding the height of the fence, is located below. It will subsequently be buried in the ground. The formed frame must be carefully transferred to the place where the bed will be organized, and the structure must be aligned diagonally.
After this, the installation locations for the corner supports are determined, the box is installed in accordance with these markings, and intermediate posts are placed inside the structure. It is recommended to use self-tapping screws to secure the boards to the supports. At the end of the work, the corners are cut and fixed with self-tapping screws.
Most structures made of plastic are supplied almost ready-made. The technologies for assembling such elements are very simple and most often consist only of serial connection elements included in the set. For this reason, plastic fencing for garden beds is so popular.