Cleaning agent for window frames and window sills. How and with what to clean white plastic on windows from sealant and polyurethane foam? How to wash plastic windows: video

Yellowed window plastic can be washed off with soapy water, ammonia, bleach or hydrogen peroxide. There are special kits on sale for the care of plastic windows, they include a napkin, detergent for PVC, lubricant for fittings and a composition for protecting seals. Acetone, concentrated acids and alkalis can ruin the profile, so their use is not recommended, the same applies to all kinds of cleaning powders. What and how to wash plastic windows from yellowness we will tell in our article.

The completed renovation is always a holiday; the eye rejoices, contemplating the whiteness of the new plastic windows. However, what is it? Six months later, the frame turned yellow and became stained. There are several reasons for this:

• Low quality window profile. In progress PVC production use complex technologies, plastic contains more than ten components responsible for the strength and color of the material.
• Titanium dioxide gives PVC a snow-white color, the stability of which depends on the quality of the powder; many manufacturers, wanting to save money, purchase low-quality raw materials and after 2-3 years the profile begins to turn yellow.
• PVC also contains special light stabilizers (obtained from benzophenone or benzotriazole), they protect the profile from solar radiation and free radicals. Thanks to these substances, the rate of light aging of the material slows down several times, the frames do not turn yellow or fade.
• Weather. Due to sudden changes in temperature, the physical properties material, the polymer may change color or even crack. This only applies to cheap profiles manufactured by fly-by-night companies.
• Choose plastic windows famous manufacturers, which have been on the market for a long time and offer a guarantee for their product. For example: Veka, KBE,Proplex,MONTBLANC, Salamander,Rehau, Kaleva,Deceuninck, SOK etc.
• It is unreasonable to save on such things, because a high-quality plastic window will serve you for 30-50 years and will look snow-white long years.
• The yellowness of bad plastic cannot be washed off - these are changes in the molecular structure of the material that cannot be bleached; all that remains is to get used to the new shade of the windows and hope that the profile will not become stained over time.

• Kitchen frames often turn yellow from exposure to soot and greasy fumes during cooking. If people smoke in the room, not only the windows and curtains turn yellow, but everything around them turns yellow. These two types of stains are not dangerous and can be easily washed with soap and water.
• Improper care- a fairly common reason for the yellowness of the profile; in the pursuit of cleanliness, housewives sometimes use: acids, strong alkalis, all kinds of cleaning powders and solvents. All these products gradually destroy the material, which leads to scratches, loss of gloss and yellowing of the surface.

If you have recently completed a renovation, then you may be interested in how and how.

What you can and cannot wash plastic windows with

Let's first figure out what you can't wash plastic windows with in order to avoid annoying mistakes.

1. Abrasives: metal mesh or brush, cleaning powders. All this leaves micro-scratches on the plastic profile, into which dust and dirt become clogged over time, causing dirty spots which are very difficult to wash. Do not use abrasives, even if it seems to you that the window is too dirty, it is better to apply a soapy mixture and let it sit for half an hour, after which the dirty coating can be easily washed off.
2. Should not be used for cleaning under any circumstances. plastic profile acetone, solvent No. 647 and No. 648, they corrode plastic.
3. Polyvinyl chloride is resistant to acids and alkalis, but the protective glossy layer on the surface of the profile can be destroyed under the influence of these substances, and the window will lose its attractive appearance.
4. ? No no and one more time no! It copes well with any type of dirt, but leaves micro-scratches on the surface, which will later fill with dirt and ruin the appearance of the window.

Don't wash windows hot water, this causes the plastic to become cloudy or yellow; everything can be washed well with cool water and detergent.

How to remove yellowness from plastic windows?

Soap solution

These products help remove yellow discoloration, and the manufacturers themselves recommend using them absolutely harmlessly: laundry soap, dishwashing liquid or washing powder. For work you will need a soft cloth, sponge or microfiber cloth.

Dissolve soap shavings, dishwashing gel or powder in water, apply to the profile and rub a little, rinse. If any dirt remains, lather the plastic again and leave for 15-30 minutes.

Rinse off the remaining product with a damp cloth and wipe the profile so that any remaining moisture does not seep between the glass panes. This way you can wash off fumes, soot, greasy deposits, yellowness from nicotine and most other household contaminants.

Advice: before using any home remedy check it on an inconspicuous area of ​​the profile; you should be alerted by a change in the color or texture of the plastic, loss of shine. If such changes appear, then this remedy should not be used.

Alcohol, ammonia, bleach, hydrogen peroxide

Dampen a cloth in one of the suggested products and gently wipe the surface of the frame and window sill. Don't forget to wipe the plastic with a damp cloth after a few minutes. You can also wipe glass with ammonia; in addition, it washes away yellowness and gives the surface a beautiful, even shine, and also helps.

Windowsill

A mixture of perhydrol and powder bleach will help whiten a yellowed window sill. You should not heat perhydrol; use cold water. Dissolve a tablespoon of both in half a liter of water. Apply the resulting mixture to the windowsill, rub thoroughly and rinse. If not everything has been washed, repeat again.

Restoration gel « Retrobright"

A video recipe for this gel was found on one of the forums where org repair specialists gather. technicians, thrift store owners and restorers. " Retrobright» used for bleaching consoles, computer cases and set-top boxes, keyboards and other plastic parts that have turned yellow from time to time.

This tool very strong and can hardly be used for new PVC windows. But it will simply be a salvation if you have moved into a rented apartment and the previous tenants left you old refrigerator, yellowed windows and grease-stained kitchen furniture, everything is not particularly dear to the heart, but very dirty.

To prepare the pasta we will need:

1. Vanish OXI Action
2. Hydrogen peroxide 32% – 100 g.
3. Water – 200 gr.
4. Potato or corn starch - 4 teaspoons
5. An unnecessary vessel, a glass jar, a couple of glasses and a plastic spoon (the metal reacts with the product, and we don’t need that), cling film, tape.

Hydrogen peroxide 32% cannot be found in a regular pharmacy, but you can buy it in a specialized store that sells chemical reagents for laboratories or order it on the Internet.

Be careful and wear rubber gloves when working with reagents, because such peroxide can leave a chemical burn on the skin.

Quarter teaspoon Vanish OXI Action dissolve in 25 ml. warm water. We dilute 4 teaspoons of starch (with a slide) in 100 g. cold water, stir well. Pour the resulting mixture into a ladle with preheated water (75 g). Heat the mixture, stirring constantly, after a while the starch will thicken. We need the consistency of thick semolina porridge. When the desired thickness is achieved, turn off the gas and transfer the paste to glass jar.

Stirring continuously, add 100 g to the gel. peroxide. When a homogeneous consistency is achieved, pour into a container Vanish and mix thoroughly again. Using a brush, apply the gel to the plastic frame and attach it with tape on top cling film so that the composition does not dry out.

Attention: “Retrobright” exposure time is 12-24 hours. In the case of windows, this time is reduced. Ultraviolet light should not reach the composition, so the gel is left overnight and washed off early in the morning with a damp cloth. Plastic parts of refrigerators or keyboard buttons can be left wrapped in film for a day or even more.

Industrial products

How to clean plastic windows from yellowness using household chemicals. There is a wide selection of industrial products for caring for plastic windows:

To clean the PVC profile, it is sold in a kit, which also includes a care product for the rubber seal and lubricant for window fittings. “Phenozol” has an antibacterial effect, relieves static tension, is non-flammable, harmless to the skin of the hands, and biodegradable.

The prophylactic set “Phenozol” is recommended to be used twice a year. This will allow you to wash the profile, ensure easy opening of the window and extend the service life of the rubber seals. The product is applied to the frames and washed off with a damp cloth. The set includes:

• FENOSOL (100 ml.) – neutral detergent composition for profiles, free of aggressive substances and solvents. Thanks to the antistatic effect, dust and soot do not settle on the washed profile for a long time. For PVC and aluminum profiles.
• FENOFLEX (50 ml.) – a product that maintains the elasticity of rubber seals and prevents premature wear. Seals are lubricated in spring and autumn, so the rubber does not freeze in winter and does not overheat in summer.
• FENOSOL (20 ml.) – aerosol lubricant for fittings. Softens friction and protects metal from corrosion. The oil does not smell, does not contain acids or resins.

In addition to "Phenozol" good feedback deserve the funds: " Amway L.O.C.», « PROFOAM 1000», « Spezial-Reiniger», « Mellerud», « Mr Muscle», « REHAU», « Cif cream», « MEINE LIEBE».

"COSMOFEN 20"– cleaner for PVC profiles (it is worth warning the reader that this product destroys a thin layer of plastic at the molecular level, thereby removing residual dirt and yellowness). Therefore, pay attention to the number after the name; the larger it is, the less aggressive the product. “COSMOFEN 5” is a strong solvent, used in production as a polish for polyvinyl chloride, as well as professional builders for removing scratches, cracks and friction marks from plastic surfaces. For regular cleaning, choose twenty and use no more than twice a year. A yellowed window sill can also be treated with Cosmofen or another solvent: "White Spirit", "Defender 30504"

Remember that before using any cleaner (solvent) for plastic, the window must be thoroughly washed with soapy water.

If none of the above helped and the windows are still frankly yellow, then the last resort remains - painting. Available for sale special paints for plastic, in the absence of one, you can use nitro paint or auto enamel.

Anastasia, September 1, 2016.

Plastic is very popular material. It is used for the production of windows, furniture and household goods, computer components, finishing materials and in many other areas. Plastic has one significant drawback - it turns yellow over time. There are several ways to solve this problem and avoid returning to it in the future.

Why does plastic turn yellow?

There are several possible reasons for yellowing of plastic:

• Oxidation. Plastic is a synthetic polymer that comes into contact with chemical reaction when interacting with oxygen, however, this process lasts quite a long time. Oxygen is inevitably contained in the air, so sooner or later the results of this chemical process appear as color changes.
• Exposure to ultraviolet radiation. Conscientious manufacturers use light stabilizers - special additives that absorb active ultraviolet rays. These additives include benzophenone and benzotriazole.
• Temperature changes during operation.
• Fatty coating.
• Incorrect care. Plastic is a material that is easy to clean, but not all products are good for caring for it. Use of caustic chemical compositions And abrasive materials when caring for plastic, it spoils its surface, which leads to discoloration.
• Poor quality material. Through recycling, plastic waste finds a second life - it is again used in production various items and designs. If you do not use certain additives in the secondary production of plastic, it will quickly lose its original appearance.
• Features of operation. It matters how plastic products are used. If there is constant smoking in the room (exposure to nicotine tar) or there is an open source of fire (soot), then even with good exhaust the material will turn yellow.

If low-quality plastic has turned yellow, it will most likely not be possible to bleach it. In other cases, you can return the color using some techniques.

All ways to whiten yellowed plastic

There are several ways to bleach yellowed plastic.

Ready-made products

In many household stores with a decent assortment, you can purchase special products for plastic surfaces. They are designed for heavy stains and whiten the material perfectly.

Effective representatives of such special products are Cosmoklar cleaning milk (Weiss Chemie) and its analogue Bauset cleaner, Bon budget sprayer.

Universal products are well suited for cleaning and whitening, for example, Cif or Domestos, Garden, Prosept, Meine Liebe, Grass sprays.

You can also purchase a universal plastic cleaner at automotive stores. Popular products are Profoam, Mafra, Doctor Wax, Liqui Moly.

Laundry soap

One gentle way to clean yellowed plastic is with regular laundry soap. It works best when the plastic has turned yellow due to greasy deposits.

You need to dissolve half a piece in a small amount of warm water. laundry soap(it’s better to grate it first). Yellowed surfaces must be treated with a sponge soaked in the resulting solution. After half an hour, the composition can be washed off.

It is better to take a product with a high content of fatty acids - it is indicated on the soap itself or on the packaging as a percentage.

Alcohol and solvents

Alcohol (ethanol) works well on yellowed plastic. Processing should be carried out with gloves and with the windows open. Simply wipe the surface with a cloth soaked in alcohol. The smell will dissipate over time, but you can use some mild scented cleaning product.

For cleaning, it is better to use a technical product, but regular ammonia will work just fine.

Alcohol can be replaced with a solvent, such as acetone. The processing process is similar. If the discoloration is minor or not too old, nail polish remover (with acetone) can also remove it.

Vinegar

Vinegar is also a gentle bleaching agent, but the fumes from this product require certain precautions. Be sure to open the window and carry out the processing while wearing thick rubber gloves.

You can make a fairly aggressive product by mixing baking soda, liquid soap and acetic acid. It is better to dilute this product a little with water.

It is worth considering that the smell of vinegar is quite persistent, so this product is not always appropriate.

Technical soda and bleaches

Such components are best used for removable plastic elements. You need to make a solution from the indicated products and soak the yellowed parts in it.

A mixture of technical soda and washing powder for white clothes works well - take a tablespoon of each component for 1 liter of water. After 10-15 hours of soaking the effect will be excellent.

Various bleaches, especially chlorine-based ones, work well to clean yellowed plastic. One of the most available funds- normal white. Sometimes she is much better means, costing many times more.

Hydrogen peroxide

This product works well even in advanced cases. Before treatment, the surface must be cleaned of dust and grease. One area must be treated at least 3-4 times.

Hydrogen peroxide has a greater effect in tandem with hair lightener. You need to dissolve a tablespoon of the product in half a liter of water and treat the yellowed surface with the resulting solution.

Special napkins

In specialized stores you can purchase wipes for the care of monitors and keyboards. They are impregnated with a special composition that effectively cleans the surface and eliminates yellowness.

Dye

If White color If the surface cannot be restored, then you can resort to a drastic measure - painting it. Best suited for this aerosol paints. The main thing is to protect the surface, which does not need to be painted, otherwise the sprayed product may ruin it.

Baking soda and powders

It is not recommended to clean plastic surfaces with products containing abrasive particles, but if other methods are ineffective, you can resort to such measures.

Great for cleaning yellowed plastic. baking soda or powder products type "Pemolux".

How to care for plastic so it doesn't turn yellow

Proper care of plastic surfaces will prevent them from yellowing. It is important to follow a few simple rules:

• Regular wiping with soapy water. After this, wipe the surface with a clean cloth and wipe dry. You can use various detergents to care for plastic, for example, for washing or dishes. The main thing is that they are in liquid or gel form.
• Do not use abrasives. The use of various powders scratches the plastic, even if it is not noticeable at first glance. Dirt accumulates in these damages, which penetrates deeper and deeper over time.
• You should not smoke near plastic surfaces - this invariably leads to yellow discoloration.
• Clean up regularly. If you don't clean plastic surfaces, they may turn yellow. This often appears on window sills with flower pots– the surface underneath often turns yellow. Learn more about how to clean a window sill.
• Use polishes. Such products create a film invisible to the eye on the surface - it protects from external influences.

If you use some tricks and take proper care of plastic surfaces in a timely manner, they will delight you with perfection for a long time. appearance. Subject to certain rules Plastic items will last a very long time and will not turn yellow.

How to remove yellowness from plastic on windows at home? The available tools that almost every housewife has will help with this:

1. 1 Soap solution. If the window sill has turned yellow as a result of dust and dirt settling, you can try wiping it with a soap solution. To do this, you just need to dilute liquid soap in water and wipe the dirty areas. It is better to use laundry soap that has a bactericidal effect.
2. 2 Soda solution. In a large container you need to dilute water and 20 g of soda powder. Removable plastic parts It is necessary in this solution for 5-6 hours, and then simply wipe with a soft towel. You can rub the window sill with this solution and leave it for the same time. The yellowness will go away.
3. 3 Alcohol (technical or ammonia). It is important to use alcohol very carefully so as not to melt the surfaces. Alcohol will help remove a variety of contaminants. Before cleaning with alcohol, you need to check the reaction of the plastic in an inconspicuous place.
4. 4 Acetone. Moisten a rag or piece of cotton wool with acetone and wipe the contaminated areas. After removing stains, wash off excess acetone so that it does not damage the plastic.
5. 5 Hydrogen peroxide. Hydrogen peroxide whitens and removes stains perfectly. It washes away grease stains and soot. It is necessary to moisten the sponge with the solution and wipe the contaminated surfaces. You can make a paste from peroxide and soda. It must be applied to the stain, left for a while, then rubbed vigorously and rinsed off the residue with water. Another option is peroxide with any stain remover. You need to mix them with water and wipe the surfaces, then wash with water.
6. 6 Tooth powder and chalk. A sufficient amount of the mixture of these components is diluted with water until a paste-like mass is formed, which is then applied to the windowsill, left to dry, and then wiped with a dry cloth.
7. 7 Vinegar. You can simply wipe the stain with vinegar or cover it with soda, and wipe it on top with a cotton swab or a rag soaked in vinegar. The impurities will go away.
8. 8 Bleaching powder for washing clothes will also help restore the yellowed windowsill and window frame to their former whiteness. Part of the bleach must be diluted with water until a thick paste forms. The mixture must be applied to the stain, wait 10 minutes, then rub well with a stiffer sponge until the stains are removed, and then rinse big amount water and wipe dry with a paper or terry towel.

Special cleaning products

You can find many plastic cleaning products on store shelves. They may contain different amounts of chemicals. These can be chlorine-containing products, acid-containing products, or products with large particles.

How to bleach yellowed plastic with industrial by specialized means? Chlorine-containing products will help restore the window sill to its original whiteness. You need to wipe it with a sponge soaked in the solution, Special attention Applying to dirt, then rinse with water. Such cleaning cannot be carried out very often, since chlorine gradually destroys the structure of the plastic.

1. 1 Silit Bang perfectly cleans plastic surfaces from various contaminants. You need to spray the product onto the surface of the window sill and lightly rub it with a cloth, leave for 15 minutes, and then rinse with plenty of water. The product has a strong odor, so it is best to clean with the windows open.
2. 2 Domestos is a universal cleaner that perfectly removes traces of rust and has an antibacterial effect. It is applied to the windowsill for 20 minutes, after which dirt and gel are carefully removed with plenty of water.
3. 3 Pemolux is gentle and suitable for combating light stains. This stain remover is applied to the stains with a dry cloth, rubbing in diligently, then the procedure is repeated as necessary, only with the addition of hot water.
4. 4 Cosmofen 10 is a toxic strong agent. When working with it, you must wear a respirator and ventilate the room well. It removes tough old stains. Apply the product to the dirt with a rag or sponge. The cleaning chemical is washed off with plenty of water, after which the room is thoroughly ventilated. Cosmofen 10 is used in rare cases because it can damage plastic.
5. 5 Mr. Proper Universal is a wonderful cleaning product, including for window sills. Available in the form of powder and gel with large abrasive particles. 3 tbsp. l. The gel is dissolved in 5 liters of water, the surface is treated, then carefully washed off with water using a soft cloth or microfiber. After this, the window sill should be wiped dry with paper towels or napkins.
6. 6 Mister Muscle for glass. Since the glass cleaner contains alcohol, it will also cope perfectly with dirt and yellow streaks on the windowsill. It needs to be sprayed onto areas, and then thoroughly cleaned with a sponge.

Causes of yellowing

If yellowing appears on the windows and sills, this means that the plastic may not have been properly cared for.

The plastic may have been exposed to prolonged exposure to sunlight, temperature changes, strong wind. This could disrupt the structure of the plastic, as a result of which it began to turn yellow

The profile must be protected by substances such as light stabilizers and antioxidants. Light stabilizers increase the light resistance of the profile and reduce wear. Antioxidants increase the resistance of plastic to temperature changes and oxidation. Such components significantly increase the cost of windows, so many manufacturers order low-quality profiles without protective substances.

Clean windows with dishwashing and other detergents ceramic products Not recommended. Hard, hard sponges too, since they disrupt the structure of the surface of the profiles and window sill. As a result, the outer shell is damaged and turns yellow.

Windows can turn yellow from the use of rough, abrasive powders, metal sponges, and scrapers, which also destroy the PVC structure.

It is possible, if funds allow, to replace the bags with new ones - aluminum or wood.

Precautionary measures

When working with spraying agents or aggressive substances, it is necessary to protect the skin of your hands, Airways by special means protection - wear gloves and a respirator. Chemicals must be thoroughly washed off with running water, and the room must be well ventilated after treatment.

Immediately after installation, plastic windows look attractive, decorating the room with their snow-white appearance. Over time, dirt appears on the windowsill from accumulated dust, marks from cups and flower vases. The frames may show black mold accumulation or just a yellow discoloration. Housewives are trying to wash and even bleach the plastic. But in order not to make things worse, you need to know exactly how to clean plastic windows without damaging their surface.

The window sill is most often subject to contamination. More dust accumulates on a horizontal surface and is sometimes used as a stand for various objects, which results in many stubborn stains of dirt. Before you start washing the window sill, it is better to remove the side decorative plugs. This will eliminate the accumulation of small particles of dirt at the joints. A stain-free surface can simply be washed with a microfiber cloth soaked in warm water. Then wipe dry to avoid streaks.

To clear old stains or traces after repair, you will have to resort to using cleaning products. It is better to purchase them in the store, but you can also prepare them at home.

Homemade Cleaning Products

The appearance of yellowness or gray spots extraneous factors often contribute. This includes Sun rays, a change in temperature or simply a change in the structure of the impurities added to the plastic.

All these unpleasant marks can be easily cleaned with home remedies:

These simple remedies, available in every housewife, will help keep PVC window sills clean.

Industrial cleaning products

For people who do not trust home remedies, manufacturers of household chemicals offer various cleaning pastes, solutions and powders. But they can be no less dangerous for plastic if used unreasonably, plus cause allergic irritations skin hands

The most popular means that can be used to clean PVC window sills are the following:

Sometimes housewives try to clean very dirty surfaces with powders intended for caring for hobs. Yes, they are effective, but before you wash the window sill with powder, you need to make sure that it does not contain abrasive substances. Solid particles will leave a lot of scratches, ruining the appearance.

To wash PVC frames, use almost the same products as for window sills, since the material being cleaned is homogeneous. If after renovating an apartment you have to wash the frame just installed windows must be removed protective film. Over time, it will stick and it will be difficult to remove it. After this, ordinary dirt is washed off with water with the addition of laundry soap, dishwashing liquid or washing powder. It is important that any composition does not contain acids or abrasives. Even on new frames they can appear small scratches. They can be easily hidden by treating the area with polish.

Store-bought care products for PVC frames

You can clean the PVC frame with the same “Mr. Proper" or similar products used for window sills. However, this list can be expanded a little:

• Domestos gel, specially developed for toilets and baths, can whiten yellowed frames;
• The basis of Pemolux cream is soda. It is safe for PVC surfaces and can easily clean stubborn dirt after repair;
• It is good to wash off grease from kitchen frames with Comet gel. When used, it is diluted at the rate of 60 ml of the drug per 5 liters of water;
• Mr Muscle cream will help whiten frames. The preparation is rubbed onto the PVC surface and washed off with a wet sponge after 3 minutes.

When using any chemical, you must remember safety precautions and use personal protective equipment.

Folk remedies for caring for PVC frames

You can clean PVC frames at home, as well as window sills, using folk remedies. Let's look at the two most popular recipes:

1. Equal proportions of chalk and tooth powder are diluted with water to form a paste. This mixture is applied to dirty surface and after drying, simply wipe with a dry soft cloth.
2. To remove a stubborn stain, sprinkle it with baking soda and immediately rub it with a sponge soaked in vinegar. The reaction that occurs will clean out the dirt, after which the frame must be washed clean water.

When using an unfamiliar folk remedy, you must first test it on small area, and then rub it all over the frame.

Removing aggressive stains

Often, after repairs, aggressive marks remain on PVC windows, which cannot always be removed with store and home remedies. They can also be removed at home.

Scotch tape marks

After removing the tape, sticky marks remain on the plastic. They cannot be removed with a dry cloth. Folk remedies will help here:

• Glue a piece of fresh tape onto the remaining mark and tear it off with a sharp jerk. The process continues until a positive result is achieved;
• any vegetable oil lubricate the sticky spot. After 10 minutes, the dirt is wiped off with a paper napkin;
• the sticky trace is erased with cotton wool or gauze soaked in ammonia or ordinary alcohol.

If there are small traces left from the tape, do not immediately resort to aggressive methods cleaning. You can try to erase the stain with a regular eraser.

Traces of paint

On plastic, traces of paint are a serious problem that requires immediate removal. First, you need to resort to a gentle method by smearing the dried paint silicate glue. As the glue dries, it will begin to shrink, pulling the bulk of the paint with it.

How to do it yourself if the sashes sag or there is a draft from the windows.

If this does not help, take a piece of cotton wool, soak it in nail polish remover and wipe the painted area. It is important to pay attention that the liquid does not contain acetone. Otherwise, this substance will corrode the plastic.

Polyurethane foam

Polyurethane foam stuck in the wrong place is a common occurrence after repairs. Cosmofen is sold specifically for PVC windows. Uncured foam is cleaned off with a plastic scraper, and the remaining stain is wiped off with a rag soaked in this solution.

Dry foam should be cut off as much as possible with a sharp knife, and the remaining stain should be moistened with Dimexide medical solution. After 5 minutes, loose residues are wiped off with the hard side of a dishwashing sponge.

The store sells special foam solvents. Before using them, you must carefully study the instructions, otherwise the aggressive solution will do more harm than good. The most harmless product for plastic and the skin of the hands is SOL OFF Delicat Barton’S.

Soot

From the street side to PVC frames a lot of soot settles. It is formed during the operation of factories and from vehicle exhaust gases. Inside the room, soot settles from tobacco smoke and burnt during cooking. It will help you get rid of it soap solution or baking soda. They simply wipe the window, then rinse with clean water. You should not use aggressive anti-soot products.

Construction mud

After the renovation is completed, traces of cement remain on the windows, wallpaper glue or plaster. All these residues are easily washed off with soapy water. Very hard fractions can be pre-soaked in vinegar, then washed off.

Having cleared the window sills and frames of dirt, all that remains is to wipe off the glass. There are many things for this store supplies like “Second” or simply add ammonia to the water. Traditional crumpled newspaper will help add shine to glass.

In contact with

Very often after repair work needs to be washed plastic window sill from pollution. Usually, Construction Materials require different approaches and products for removing them from clothing, leather, furniture and plastic. Therefore, home owners are faced with the question of how to clean plastic window sills from stains.

Due to the fact that windows with a plastic base are structures that have long term operation, they require more careful surface care. Therefore, the question of what can be used to clean a plastic window sill is not idle at all and is quite relevant.

Important! Plastic tends to absorb slowly various kinds contamination, which requires regular cleaning during operation.

In order to know exactly how to clean the window sill of a plastic window, you need to study the properties of the most common contaminants that may appear on the surface of the plastic.

So, let's figure out what is the best way to wash plastic window sills.

A plastic window sill does not require special surface cleaning procedures. To keep it clean, you should clean the surface once every few days using a dry, clean rag. The procedure allows you to promptly remove dust that accumulates on its surface between cleanings.

It is recommended to wet clean the surface once every 7 days. To carry out the cleaning procedure, you can use dishwashing detergents or washing powders. Before the procedure, detergents are dissolved in warm water. In case of serious contamination, the use of more serious cleaning agents will be required. Window sills often require serious cleaning kitchen window

. Window sills in rooms where renovations were carried out may require major cleaning of pollutants. When choosing what you can use to clean the window sill of a plastic window, be sure to take into account the properties of the contaminants that have accumulated on its surface.

• The most common surface contaminants are:
• dirt;
• various kinds of spots;
• cured polyurethane foam; sticky tape and adhesive compositions
• special construction primer mixtures.

Many housewives are wondering how to clean plastic window sills at home. When cleaning a window sill at home, you can use various cleaning compounds and products that do not interact with the plastic and do not destroy its structure.

To combat dirt on the surface of a plastic window sill, you can use a large number of various chemicals

Products used to clean plastic window sills

To combat dirt on the surface of a plastic window sill, you can use a large number of different chemicals. The entire range of chemicals can be divided into several categories. The main categories of such compositions are as follows:

• detergents;
• cleaning;
• spraying.

Most often, washing the window sill is carried out simultaneously with washing the window glass.

The modern chemical industry presents household cleaning products great amount. These products have a gentle effect on the surface and are able to quite effectively clean it of dirt. The packaging of each product contains instructions for use, in which the manufacturer recommends the optimal proportions for using the drug. All detergents are diluted in warm water until completely dissolved and mixed, after which ready-made solution contaminants are cleaned up.

Detergent chemical compositions mean a variety of gels for washing dishes and plastic products. These products are very effective in cleaning light stains and washing.

Conventional cleaning chemicals are not suitable for removing stains on the surface of plastic. Removing this type of contaminant will require more strong remedies cleaning. To know exactly how to clean stubborn stains from a plastic window sill, you need to at least presumably know the nature of the origin of the stain, as well as the properties of the chemical used to remove it.

For the cleaning heavy pollution and stubborn stains, household chemical compositions are used, which belong to the category of cleaning products. Most often they are powdery. When using, it should be poured onto the stain and rubbed well with a sponge. Cleaning compositions can be used to get rid of glue stains, traces of construction and regular tape, and ingrained construction primer.

In some cases, cleaning fluids designed for toilets and sinks can be used to clean the window sill. It is not recommended to use such compositions frequently, as they can cause yellowing of the plastic.

Spraying compounds include special compounds for washing plastic. These chemicals are capable of washing away a wide variety of contaminants, but are weak.

In some cases, cleaning fluids designed for toilets and sinks can be used to clean the window sill.

Removing rust from a plastic window sill

In order to quickly remove stains and rust from the surface of plastic, it is enough to purchase one of the preparations intended for plastic products. The list of such special compounds produced by modern industry is quite large. The most popular among such special compositions are the following:

• universal Mr. Proper;
• Cillit Bang;
• Sanita;
• Domestos gel;
• Pemolux;
• special agent Cosmofen 10.

The latter special substance is toxic, so it is recommended to wear personal protective equipment when using it.

In addition to the specified special preparations, there is a whole range of various glass cleaning products that remove dirt from plastic with great success.

Mr. Proper ideally removes stains and dirt from the surface of polymer products, and therefore also plastic window sills. This type of household chemical is sold in the form of a powder or gel, which contains abrasive elements. After using the cleaning composition, rinse the surface thoroughly with water using a porous sponge. After washing, the surface is dried paper towel. If the surface is poorly washed of chemicals, it begins to attract dust like a magnet.

Mr. Proper ideally removes stains and dirt from the surface of polymer products, and therefore also plastic window sills

CillitBang is best used by spraying onto a surface. After 15 min. After spraying, wipe the treated surface with a cloth and rinse with water. The disadvantage of the product is the presence of a strong odor, so the premises should be ventilated during use.

Sanita is a product that is recommended for removing soot and greasy stains window sill in the kitchen. The product should be applied to the surface and left for 20 minutes, after a while wipe and rinse warm water. After washing off the detergent, wipe the surface dry using soft fabric which absorbs moisture well.

Domestos gel perfectly removes rust. The technology for using the drug is as follows: apply the drug and leave for 20 minutes, then rinse the window sill with hot water and dry with a soft cloth.

The special product Cosmofen 10 allows you to remove the oldest stains from the surface. It takes a lot of water to wash off the product. And after the procedure you will need to ventilate the room.

Domestos gel perfectly removes rust

We wash the window sill after repairs

Especially often the question of how to clean the window sill of a plastic window arises among those who have renovated their apartment. After all, there can be a lot of contaminants on it, and they all have a different nature of origin.

Important! To cope with pollution easily, you need to adhere to certain rules and recommendations given by experts.

1. First you need to remove all the plugs under which a large amount of dust accumulates during the repair work.
2. To remove splashes of primer mixtures or plaster solutions from plastic, it is necessary to use cleaning compounds that contain abrasive elements. Such chemicals are applied to the plastic and left for half an hour. Contaminants after treatment are removed using a rubber spatula.
3. Stains from polyurethane foam remove with a hard bristle brush.
4. After getting rid of dirt, you need to wash the window sill with any detergent and wipe dry.

If necessary, washing should be carried out several times until the window sill is completely cleaned.

How to remove various stains from a white window sill

White window sills made using polyvinyl chloride have a very presentable appearance. Polyvinyl chloride is a material that retains its physical properties for a long time. Window sills retain their appearance for a long time if you follow basic operating rules.

For cleaning, you can use a variety of products - both special and folk ones.

Chalk or regular tooth powder are very effective for cleaning.

You can bleach the windowsill washing powder for white items, you can also use bars of soap.

Chalk or regular tooth powder are very effective for cleaning. These compounds have a gentle abrasive effect and allow you to clean the surface of almost all contaminants. The gentle abrasive contained in the tooth powder does not damage the window sill, but does clean effectively.

To prepare the mixture, mix 1 tbsp. l. powder with a small amount of liquid. The consistency of the mixture should resemble thick sour cream. The prepared mixture is applied to the window structural element and rubbed with a dry household sponge. To effectively whiten the surface, you can leave the mixture for 15-20 minutes, let it dry and only then rinse with warm water. Then the window sill is wiped dry.

Advice! If stains cannot be removed from plastic, you can try to hide them.

To do this, you can use self-adhesive film - white or with various patterns. In addition, to protect the window sill from dirt, you can use self-adhesive transparent film.