The number of finishing materials is growing year by year. But wall panels for interior decoration have been known for a long time. The first to use wooden panels for wall cladding; later other materials were added.
What types of wall panels are there for interior decoration (forms of release)
Wall panels are an advantageous finishing option. They can be mounted on a base of any curvature and appearance. When installing them, the long and difficult process of plastering and putty is not necessary. Wall panels for interior decoration are attached to a lathing made of wooden blocks or metal profiles, thanks to which any irregularities are hidden. This finishing material is produced in three types: in the form of sheets, plates and slats. Let's look at each type in more detail.
Slatted panels for wall decoration
They have a small width. but a significant length. They are connected to each other using the tongue and groove principle. There are slatted wall panels for interior decoration, in which the joints are barely noticeable, and there are others with a pronounced relief. Among the installation features: the sheathing should be located perpendicular to the direction of installation. If you install the planks horizontally, the sheathing should be vertical.
Made from fiberboard and plastic (PVC), they have wide application. popular for budget finishing of walls and ceilings in bathrooms and kitchens. Their disadvantage is fragility. Under mechanical loads, the plastic bends and, in rare cases, may crack. For places with high humidity You can use MDF panels (except for places in direct contact with water). Slatted fiberboard and chipboard panels are more suitable for dry rooms. They are distinguished by much higher resistance to loads. Good for decorating walls in hallways, corridors, living rooms.
Plastic panels for interior wall decoration - space for design ideas Slatted panels for fiberboard walls - a budget option
During installation, slatted panels are attached to the sheathing with self-tapping screws or staples made of. There are also special fasteners: clamps. A clamp is attached to the sheathing, and it holds the rail with its protruding part - the tongue. In general, clamps are used for mounting wall panels for interior decoration of any type. This convenient system hidden installation.
Installation of slatted wall panels can be carried out in horizontal, vertical, inclined directions. The least amount of waste is achieved with vertical or horizontal installation. Although the slatted panels have a considerable length (from 2.4 m), there are still joints. There are special joining strips for their decoration. Special additional elements are used to decorate internal and external corners, starting bars- to decorate the edge of the trim.
Vertical, horizontal, oblique, same width, different….
In general, it is worth saying that slatted wall panels for interior decoration are a good choice. Their appearance combines with ethnic, loft, modern, and some classical styles. In fact, everything depends on the appearance of the panel. They can imitate wood, ceramic tiles, and stone surfaces. Honestly, the imitation on PVC wall panels is “so-so”. Even from a considerable distance you can see that it is plastic. The woody relief on slats looks more believable MDF panels, a little worse - on chipboard.
Wall slabs
Panels for finishing walls in rooms are produced in the form of slabs. They have a rectangular or square shape. The maximum size for squares is 100*100 cm, for rectangular ones – 120*80 cm. Among the installation features, the sheathing must be made to match the size of the slabs. In some systems, fragments are joined using joining profiles, which are visible between the slabs and may have a different color (most often darker). Due to this, the wall looks more voluminous.
Slab wall panels for interior decoration are produced from MDF, chipboard, wood, gypsum, metal (aluminum, painted or stainless steel). In our climate, metal wall panels are rarely used for interior decoration. But MDF and chipboard are popular finishing materials for residential premises and corridors. They can be either smoothly painted in one color or imitating wood, stone or brickwork, ceramic tiles, and concrete. Unlike plastic panels, the imitation is reliable, since the manufacturing technology makes it possible to make the surface not smooth, but textured.
Gypsum wall panels have a deep texture. This is the material that is called volumetric or 3D panels. Due to the high plasticity of gypsum, you can create a surface of any shape. Such slabs go white, but can be stained.
Sheet finishing material for walls
Sheet wall panels for interior wall decoration have substantial dimensions - height from 220 mm to 300 mm, width usually 125 cm. Their advantage is that you can find such a size that the slab occupies an area from floor to ceiling. In terms of width, they will most likely have to be joined, but the joints are designed as trim, so it looks good. One of the installation features is that in case of small unevenness on the wall, they can be attached directly to the wall, without lathing.
sheet wall panels are a way to quickly level walls and finish them at the same time
Sheet wall panels are made from PVC, laminated chipboards and fiberboard, MDF. Plastic sheet panels are good for wet rooms - bathrooms, kitchens. Ceramic tiles, brick and stone masonry are often imitated. The desired relief is formed on the plastic, so this imitation looks quite believable. There are also sheet plastic panels with photo printing. They are often used as kitchen aprons– for finishing working wall instead of ceramic tiles.
Sheet wall panels made of laminated fiberboard are one of the budget options interior decoration. Most often it imitates wood, but can be found for brick and stone masonry, smoothly painted. Due to the hygroscopicity of the material, they are used only in dry rooms - corridors, living rooms.
Leafy MDF boards can be used in conditions of high humidity; finishing material made from chipboard is suitable for decorating rooms with normal humidity. In terms of texture and color, there are all the same options: imitation wood, stone and brickwork, plain-colored sheets. MDF wall boards can be with relief pattern(3D). But, unlike plaster, they cannot be painted.
Characteristics and scope of application by type of material
We won’t talk about PVC panels. There is a separate article about them with detailed description installation technologies on and. In this paragraph, we will consider wall panels for interior decoration made from other materials. There are more than enough of them. There are the usual MDF and chipboard, there are exotic bamboo, glass, and metal.
MDF panels
Finishing wall panels based on MDF are available in three forms: slatted, slab and sheet. Their surface can be finished with veneer or laminated (covered with film), or painted. The surface can be smooth or embossed, the color can be any, even floral. Most often, MDF panels imitate wooden surface(can be the natural color of the wood, lightened, tinted in different colors).
This option is also not bad Color variations - wood, smoothly painted Color options " wild stone» Brick, stone, floral design... whatever you want
The option with brickwork is also popular, but is a little less common. masonry. There are also plain-colored colors and, although they are presented in even cheaper materials such as fiberboard and chipboard, they are still bought. There are reasons for this:
- MDF is one of the most safe materials. It is formed from wood waste ground into fibers and then pressed at high temperature. Under these conditions, a natural binder is released - lignin, which is contained in wood fibers. If there is not enough binder, add a binder previously isolated from other rocks. Therefore, MDF is considered a natural finishing material, it is approved for use in children's and medical institutions (the formaldehyde emission coefficient of this material is not higher than E1).
- MDF is not afraid of high humidity and reacts little to temperature changes. Therefore, MDF wall panels for interior decoration can be used in rooms with high humidity, but not where there is direct contact with water.
- You can create a relief of any complexity. Simpler designs are formed during pressing, while more voluminous and complex ones are formed using a milling cutter. This technology is used to make 3D MDF wall panels.
Wall panels MDF with a 3D effect - stylish The pattern can be anything... floral, geometric, fantasy If you also add metallic paint... Accent wall made of volumetric MDF panels for wall decoration
This material still has a drawback: it costs a lot. The price depends on several factors:
- Densities.
- Material thickness.
- Difficulty in forming and painting.
Minimum price - from $30 per square meter, maximum - up to several hundred dollars. But here you also need to understand that there are MDF wall panels for various purposes. Available for wall decoration. They have greater density and thickness (from 8 mm thick). Minimum price from $40. For finishing the ceiling. You can take thin ones (from 6 mm), since there is practically no mechanical load. But we must take into account the following fact: the thinner the MDF, the more often it is necessary to install hangers (fasteners). Otherwise, MDF panels may bend under their own weight. Fasteners cost money, so if you can save money, it will be insignificant. But you will spend more time on work.
Chipboard wall panels
Chipboard panels for wall decoration are made of sheet and slab types. The material is characterized by low resistance to humidity, so it is used exclusively in rooms with normal humidity. It also reacts poorly to cold, which is why it is not used on unheated loggias and balconies, bathhouses, and summer cottages.
At chipboard production use an artificial binder containing formaldehyde. In high concentrations, this substance is dangerous, because the production of the material is controlled by the sanitary and epidemiological station. Each batch of material is tested, and based on the results of laboratory tests, a hygienic certificate is issued with the emission class indicated in it. An excellent indicator is Super E and E1 (like natural wood), acceptable - E2. Everything above ( more numbers) it is better not to use at home.
Chipboard wall panels for interior decoration are available laminated (coated with film) or veneered. Their range is not so wide - the material is weakly plastic, so the slabs are mostly smooth. Only some manufacturers have modern equipment, which allows you to shape the relief. But, even with new equipment, the maximum that can be formed is imitation of brickwork, ceramic tiles, wood texture.
Fastening can be secret - using clamps - or self-tapping screws. When fastening with self-tapping screws, holes of a smaller diameter are pre-drilled in the material. And we must remember that it will not be possible to reinstall the same fasteners. Must be used larger diameter, since the material is crushed/crumbled and cannot be restored.
Gypsum panels for wall decoration
About 5 years ago, gypsum wall panels for interior decoration appeared on the market. This is an environmentally friendly finishing material, absolutely faithless and hypoallergenic. Another advantage is its absolute non-flammability. It is as flammable as stones. Overall a good choice.
Production technology makes it possible to create a relief of any complexity, so such slabs have a figured front surface. They are also called 3D wall slabs. The types of relief are very different. Geometric patterns of varying complexity, curved lines, circles, plant motifs and all this in combination. There are very, very many options and variations. Production technology has almost no limitations. And all this variety is available in two versions:
- Made from pure gypsum diluted with water. Can only be used in rooms with normal humidity, since gypsum is hygroscopic. When wet, it collapses. Area of application: corridors, living quarters.
- Moisture resistant with hydrophobic additives. Additives reduce absorbency so much that this type of finish can be used in rooms with high humidity. With some types of additives, they can be installed in places of direct contact with water - near bathtubs, washstands. They can be installed in bathrooms or as kitchen splashbacks.
In any case - moisture resistant or not - gypsum wall boards for interior decoration can be painted. This is perhaps the only option for painting. The paint can be anything. Its type is selected for the task: if there is a need wet cleaning, the paint must be resistant to washing; if you are painting gypsum panels mounted on the walls of the pool, you need paint with a water-resistant effect (or cover it with varnish).
3 D gypsum panels in the interior of the dining room, living room - just what the doctor ordered... Longitudinal or horizontal arrangement - you choose, square slabs 50*50 cm, as you turn, so it will be Painting and lighting - a secret bright interior One of the most perfect imitations of masonry is in gypsum panels. Three-dimensional figures on 3D wall panels. An unobtrusive pattern can be found in the bedroom.
Installation gypsum boards for wall decoration - with glue. If the surface is flat, you can directly on the wall; if there are differences, you need to either level the wall or install a sheathing. Use universal glue, but make sure it is suitable for the materials used and can withstand sufficient load. One slab weighs about 2-4 kg. Not too much, but not a lot.
The seams between the plates can be left, or a seamless surface can be made. The choice depends on the type of terrain and type of room. There are slabs that are clearly “square”, so the seams look attractive. You just need to take into account that it is better not to do them in the bathroom or kitchen - it will cause unnecessary problems when cleaning. There are no such problems with living rooms - here heavy pollution can not be.
Bamboo trim panels
Not too common, but interesting option— bamboo wall panels for interior decoration. They are made from bamboo cut into strips which are then woven into slabs. different sizes. After which the material is pressed, painted and varnished. Such bamboo panels are suitable for interiors in ethnic style, and more of an eastern orientation. The resulting braid has different thicknesses - from 1 mm to 7 mm. Depending on the thickness, bamboo panels are glued to the ceiling (1-3 mm thick) or walls (4 mm and thicker).
The room may have East style Bamboo and cork also look organic side by side
There is another technology for producing bamboo wall panels. In this case, the stems are crushed to fibers and pressed at high temperatures. This is how 3D eco-friendly panels are made from bamboo. The same technology is used to produce similar material from cellulose and reed. The variety of patterns here is no less than in gypsum analogues, and the thermal conductivity is slightly less. The disadvantage is that they do not belong to the category of non-combustible materials. And one more thing: they are produced in China, Thailand, but there is no production in Russia yet.
The method of installation of these volumetric finishing panels- on glue. The seams are puttied and leveled. The surface can be painted, but it must first be coated with a primer - to reduce and equalize the absorbency and so that the paint goes on more evenly. It is better to apply paint from a sprayer - it is difficult to paint the relief with a brush and completely impossible with a roller.
Metal panels for interior decoration
Wall panels for interior decoration are not used very often. We don’t associate metal, its shine with the comfort of home. Occasionally they can be seen in interiors in high-tech, loft, minimalism, art deco styles. As a rule, they draw up accent wall. In the most avant-garde interiors metal panels for walls can be seen on the ceiling.
High-tech uses polished or matte stainless steel, loft and art deco can use painted or artificially “rusted” black steel. Steel plates, but painted in gray, black, red, can be minimalist.
Due to their resistance to water and moisture, panels made of of stainless steel can be seen as a kitchen f
For the daring, decorate the walls in the bedroom with steel wall panels. Aged copper is an excellent finishing material for the Art Nouveau, loft style. In combination with tiles.
artuk. In general, this a good option for finishing balconies and loggias. There are metal panels coated with a layer of colored polymer. They are used for, so they are not afraid of anything on unheated balconies. By the way, there are corrugated metal panels that are perfect for suspended ceiling in wet rooms (bathroom, swimming pool) and will not interfere with ventilation.
Glass and mirror
Wall panels for interior decoration made of glass and mirrors appeared several years ago. As a rule, they are mounted on previously painted surfaces, protecting them from moisture. This technique works well in rooms with high humidity - bathrooms, kitchens. Tempered glass is used, consisting of several layers bonded together with a transparent polymer. Such glasses are used as entrance doors. So they are safe as wall decoration.
If the painted walls in the bathroom are covered with glass panels, such finishing will not be demolished. With photo printing Mirrors - great way make the interior unusual
There are also new trends - photo printing on glass. Using new technologies, any design or even a photograph can be applied to glass. Since such decorative panels still remain translucent, the wall must be painted. But the choice of color and tone depends on the desired effect.
Another non-standard look wall panels are made of mirrors. They are also made from durable, film-glued sheets. Making a wall completely mirror-not always good decision, but to make stripes - vertical or horizontal - interesting idea. The interior immediately becomes fashionable and dynamic.
Wall panels - perfect solution in a situation where the main task is minimum costs in everything, both in money and in the efforts made. Are you wondering how to decorate the panels in the kitchen?
It’s simple – a huge selection of textures and colors, and the raw materials can be either natural or artificial.
Wall panels are at the peak of popularity and are in demand on the market, despite the fact that they appeared relatively recently.
Wall cladding provides excellent protection against various kinds pollution, but not only. Moreover, she asks special style throughout the room. Decorative panels for the kitchen have many adherents, because the distinctive property of this material is precisely that it can withstand the influence of all environmental factors.
That is, wall panels in the kitchen perfectly withstand splashes of hot oil, soot, steam, and high temperatures.
How does a kitchen differ from other rooms? For example, because there is an increased risk mechanical impact, for example, when kitchen utensils fall.
A decorative panel for a kitchen wall is relatively inexpensive.
Wall panels for the kitchen are distinguished by the following characteristics:
- Widest color selection.
- Variety of textures.
- Easy to install.
- Affordable price.
- Combination with all cladding materials.
The decorative panel covers both 30% of the wall and its entire area. The fastening can be rack or sheet. In the manufacture of panels, materials such as chipboard, MDF, wood are used, matte plastic, drywall.
Visually, slatted panels resemble lining. The product can be of any size, and therefore the artist’s imagination is limitless. Main – right choice options for how the slats will be mounted.
Features of the species
Panel structures are most often made from natural massif or natural wood, covered with veneer. Each option is attractive, and the kitchen turns out to be homely, cozy, and warm.
Some people are concerned about the hygroscopicity of wood, but there is definitely no need to panic ahead of time, because the product is treated with protective compounds.
How is a kitchen finished with panels? The selected wall panels are attached to the wall so that there is a gap for natural ventilation.
Panels made from fiberboard slabs, MDF is noticeably cheaper than panels made from natural wood, which is quite logical. So, if we compare products made from MDF and natural wood, the first ones are distinguished by higher quality characteristics: noise insulation is higher, thermal conductivity is lower.
How is installation done?
Panels are often installed on their own, but adherence to technology is important. The installation process can be simplified by knowing a number of nuances:
Plastic panels are very sensitive to heat, and therefore if the air temperature is above forty degrees, then the three-meter structure lengthwise increases by a centimeter.
The sheet panel is not inserted tightly into the grooves of the profile, which is a guide - it is left both at the top and at the bottom, about 5 millimeters each.
It is best to carry out installation in spring and autumn, in the off-season.
Wall installation
It is important to take note of the fact that the panels are installed in a certain sequence:
- The first step is to select the type of material and color.
- The approximate consumption is calculated.
- The length of the moldings is determined.
- The sheathing of slats is being prepared.
- The profile is installed, intermediate slats are attached.
- The first panel is installed from the corner.
- The material is fixed to the self-tapping screws.
The panels are not at all difficult to care for - you can easily get by with a damp cloth.
On the Internet at numerous photos panels for the kitchen, it is clear that products, thoughtfully selected to match the style of the kitchen, become both a decoration of the space and protection of the wall from temperature changes and high humidity.
Photos of decorative panels in the kitchen
On modern market presented a wide range of finishing materials for the kitchen, varying in quality and price.
The most popular among them are decorative panels for the kitchen wall, which optimally correspond to the price-quality ratio.
Advantages and disadvantages of the material
Decorative panels for the kitchen are a finishing method available to a wide range of consumers. The advantages of this type of finishing include:
- relative cheapness compared to ceramic tiles;
- convenience and ease of installation;
- affordable consumables;
- ease of care;
- wide range, variety of colors and textures;
- harmonious combination with other finishing materials;
- high hygiene;
- increased sound insulation;
- resistance to moisture and high temperatures.
Among the shortcomings, experts highlight:
- insufficient mechanical strength;
- inability to use abrasive cleaning materials.
In addition, decorative wall panels for the kitchen attract consumers with their almost complete absence construction waste and the ability to make repairs regardless of the time of year, since there is no need to wait for the plaster to dry.
Types of wall panels
Designers often use decorative panels as kitchen finishing due to the wide variety of options and materials, as well as other important characteristics.
There are several types of panels, depending on:
Finishing methods:
- high, covering the surface from floor to ceiling;
- supporting, installed on the bottom of the wall and having a height of about 1.5 m.
Method of fastening and dialing:
- tiled – different-sized rectangular/square products;
- rack - standard lining with a wide range of sizes;
- sheet - for covering large surfaces and are most often attached with glue.
Panels in the form of tiles and slats are mounted with nails, clamps or by lathing.
Material type:
- wooden from chipboard/MDF;
- woody;
- plastic (PVC);
- plasterboard;
- tempered/non-tempered glass;
- fake diamond;
- postforming and others.
When choosing among the variety of decorative kitchen panels, use the recommendations of experts:
- before purchasing, make a complete and accurate calculation of the area of the surfaces to be decorated;
V small space arrange the materials vertically or use the installation of vertical columns decorated with flowers; - experiment with a combination of different finishing materials, which will significantly save your budget and realize non-standard ideas on kitchen design.
Using these simple tips and a variety of finishes, you can create a cozy and multifunctional room(below are photos decorative panels for the kitchen) and, if possible, visually increase the space.
Installation features
Decorative panels on the kitchen wall allow self-installation without the involvement of specialists. However, it is necessary to strictly follow the installation technology.
To install decorative panels for the kitchen on the apron, you need to start by preparing the wall. To do this, it is necessary to ensure that the wall is 100% dry and even, and to eliminate surface damage. Cracks and potholes should be plastered with a mixture of sand and cement or alabaster at corner joints.
If there are irregularities over 15 cm, the surface to be decorated must be covered. In this case, the panels are attached to the sheathing.
When using glue to mount decorative pvc panels For the kitchen, the surface requires preliminary priming. TO further work You can start only after the wall has completely dried.
The installation adhesive is applied from the inside of the panels in even strips at a distance of 10-15 cm. Allow the glue to set for the time specified by the manufacturer in the installation instructions, and then apply the panel to the surface, pressing it tightly and fixing it with spacers.
For reinforcement, you can screw in self-tapping screws in each corner along the edges, the heads of which are covered with decorative plugs.
To cut/cut the finishing material, use a utility knife or sanding machine. Don't forget to hide the edges with a corner.
The joints between the panels are covered with a decorative strip matched to the tabletop.
Rules of care
Caring for decorative kitchen panels is not special labor. After installation, they must be wiped with a damp cloth using gentle detergents.
They will easily remove construction dust and adhesive residues. Never use abrasive cleaners, as they can damage the surface of the material.
The choice of finishing materials is exceptional individual solution, depending on the preferences of the owners and family budget. If you have chosen decorative panels, you have provided yourself with a strong and durable coating.
Photo of decorative panels for walls in the kitchen
Specialization: facade finishing, interior finishing, construction of summer houses, garages. Experience of an amateur gardener and gardener. We also have experience in repairing cars and motorcycles. Hobbies: playing the guitar and many other things that I don’t have time for :)
There is only one way to decorate a kitchen quickly, modernly, beautifully and without wet work - with the help of panels. But what kind of materials are these, what types are they and what qualities do they have? I will talk about them in detail and add to my review bright photos, which will certainly help you choose panels for the kitchen.
Types of panels
The most popular types of kitchen panels are:
Below we will take a closer look at the features of each of these materials.
Material 1: PVC panels
The undisputed leader in popularity for many years has been plastic panels made from polyvinyl chloride. They are also called plastic lining, due to their similar shape to wooden clapboard and a similar method of joining with each other.
As for the appearance of this material, the choice is simply huge. Depending on the type of design, products can be divided into the following types:
- plain;
- with patterns;
- imitating various materials(stone, wood, tiles etc.).
Advantages. In addition to their attractive appearance, plastic panels have many other positive qualities:
- Price. Finishing plastic panels kitchens are the most budget-friendly solution;
- Moisture resistance. Not afraid of direct contact with water;
- Practicality. The surface finished with plastic is easy to clean, and you can even use detergents to remove grease and other contaminants;
- Fire safety. According to manufacturers, PVC lining does not burn, but only smolders.
Flaws.
- UV instability. Over time, exposure to the sun plastic lining may turn yellow;
- Instability to mechanical loads. The panels crack and break easily.
Keep in mind that polyvinyl chloride is not resistant to high temperatures, so if the lining is close to the stove, the surface may melt.
Installation nuances. Most often, plastic lining is mounted on a lathing made of wooden slats or metal profiles. True, if the walls are smooth, the panels can be glued " liquid nails" Please note that in this case it will be more difficult to dismantle the lining, and it will not be possible to replace one of the panels if it breaks. But on the other hand, you will save a little kitchen space and speed up the installation process.
Price:
If you need to hide corrugation, communications or hide an unnecessary niche, you can make a false panel from plastic lining.
The prices in the article are current in the summer of 2017.
Material 2: MDF
MDF is particle board medium density. Unlike the familiar chipboard, this material has a more uniform structure. In addition, its important feature is that it contains no formaldehyde moles. Accordingly, MDF is more environmentally friendly than other types of wood-based materials.
Of course, the material itself does not look attractive, so it is applied to the surface of the panels. decorative coating. Most often, MDF is laminated, i.e. covered with PVC film under the influence high temperature. Since an image is easily applied to the film using photo printing, a laminated panel can imitate any materials, from wood to stone.
Most often, MDF panels are used for aprons. In this case, they are decorated with various photographic images. If desired, you can also decorate the walls with this material.
Advantages:
- Design. MDF trim looks more natural and expensive than plastic;
- Practicality. The laminated surface is easy to clean;
- Heat resistance. Heat-resistant film is used for laminating kitchen panels;
- UV resistance. The material does not change color throughout its entire service life.
Flaws:
- Easily scratched. The film requires careful handling, since it is very easy to damage it, especially for cheap models. Keep in mind that it is impossible to restore a laminated surface;
- Instability to moisture. MDF itself is not resistant to moisture. Therefore, when installing the material, it is necessary to protect its ends that are not covered with film. As a rule, a sealant is used for these purposes.
Installation features. Wall and ceiling panels are attached in the same way as their plastic counterparts. To install the apron, special profiles are used that are attached to the wall.
Price:
Material 3: glass
IN Lately Glass panels are becoming increasingly popular. They look very beautiful and modern, in addition, they have excellent performance.
Most often they are installed on work area, i.e. as an apron. If desired, the walls can also be finished with glass.
Advantages:
- Practicality. The glass is easy to clean and is resistant to any chemicals. Therefore, you can use various detergents to remove grease and other difficult-to-clean contaminants;
- Safety. Finishing material It is made of durable glass that can withstand even strong shock loads. And if the glass breaks, it is not capable of injuring thanks to the use of modern technologies in manufacturing;
- Durability. Glass is an almost eternal material, if, of course, you handle it carefully.
Flaws:
- High price. Glass panels are the most expensive;
- Impossibility of repair. If cracks occur, repairing the glass panel is impossible;
- Marking. Fingerprints and poor care are clearly visible on the surface of the glass.
Installation features. Working panel it is usually installed in the same way as its MDF counterpart - using profiles. Wall slabs are mounted using glue. Therefore, before installing them, the surface must be carefully prepared - leveled and primed.
Beginners are often interested in what to glue glass panels? For these purposes, it is best to use special glass glue. In addition, the material is often glued with silicone sealants.
Price:
That's all the materials we wanted to tell you about.
Conclusion
Now you know what kitchen panels exist and what qualities they have. If the article did not answer any of your questions on the topic raised, ask it in the comments, and I will be happy to answer you.
July 5, 2017If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!
A kitchen apron is a panel that is placed between the surface of the countertop and wall cabinets. Its main task is to protect the walls from dirt, grease and steam.
When choosing, pay attention to the material from which the kitchen apron is made:
- Glass panels provide reliable protection walls from moisture, look stylish and do not require special care. The drawing is made using environmentally friendly ink. If the glass splashback is wider than the distance between the cabinets and the countertop, it will not be possible to trim it. But you can put its edge behind the furniture - strained glass will withstand such a load.
- Chipboard and MDF aprons lined with durable decorative plastic, which protects wood chips in the boards from moisture penetration. The main difference between chipboard and MDF is the substance that is used to bind the particles together: in the first case it is formaldehyde resins, in the second it is the natural component lignin. Both materials meet environmental safety requirements. Such panels can be easily mounted on any wall.
- PVC aprons They are inexpensive and easy to install. It is easy to make holes in it for sockets or roof rails. Please note: plastic aprons cannot be installed over gas stoves.
The appearance of the apron is of great importance. It can be made in the same colors as the tabletop and serve as its continuation. A panel with a bright pattern will become an independent accent in the kitchen interior. Choose matching apron for the kitchen in Castorama hypermarkets at affordable prices!