Clean grease at home. How to easily remove grease from the kitchen using folk remedies? Video: how to remove grease from kitchen furniture

Few people love cleaning. But to deny its necessity is pointless, impractical, and generally stupid.

If you can deal with simple stains yourself, then most people trust some types of stains to professionals, whose services cost a lot of money. And, as it turns out, in vain. After all, you can deal with almost every stain on your own.

We wash stains simply and easily

Today you will learn 11 effective cleaning methods various surfaces and in the future you will be able to save money from the family budget.

The seats of your precious car knew better times, and you want to return them to their former shine? Forget about expensive dry cleaning, the problem can be dealt with with minimal effort.

All you need:

• soap solution;
• a little soda;
• vinegar.

These simple components, which can be found in the kitchen of any housewife, will instantly return the upholstery to its original appearance. You just need to soak a hard brush in the solution and thoroughly clean the chairs with it.

Despite all the many advantages washing machine, it has one drawback - through long time work, an unpleasant musty aroma appears in it, which eventually permeates all things.

It is possible and necessary to cope with the problem. It is enough to run the longest washing mode, having first poured it into the container instead of washing powder a little bleach. If you are afraid that the smell of bleach will not disappear later, replace it with a combination of baking soda and regular vinegar.

Don't forget that in this case, things in washing machine You shouldn't load them, otherwise you risk ruining them.

Getting rid of burning on the grill, which can add unpleasant notes to the sweet aroma of meat, is as easy as shelling pears. Take one medium-sized onion, cut it in half and rub it between the twigs.

Microfiber is a rather whimsical material. You can’t wash it off with plain water - after such exposure, unpleasant stains or stains will remain on the furniture. But alcohol or distilled water can help.

First, soak the sofa with one of the above products, and then thoroughly wipe it with a stiff, dry brush.

A frame that is clogged and dirty with dust can ruin even the most picturesque landscape outside the window. Making it shine is even easier than upgrading the upholstery of car seats.

Just on right place Apply a thick layer of regular baking soda. After this, do not water it a large number vinegar and wait a couple of moments until the resulting mixture begins to bubble. Rub the surface thoroughly with cotton swabs or an old toothbrush.

Now all you have to do is wash the frame with a damp cloth and remove the remaining soda solution.

No matter how shiny your kitchen or toilet tiles are, greasy and dirty seams between them will ruin the whole look. The problem can be solved easily and gracefully. Just use soapy water, bleach and an old toothbrush.

With this simple method you can clean your bathroom in literally 10-15 minutes.

Probably the easiest way to solve the problem listed here. It is enough just to dilute about a spoonful of baking soda in a glass with hot water and soak the comb there for a while. Voila, the accessory will look like new.

To clean the air vents in your car or home, you can use a regular wide cosmetic brush. Firstly, this effective way surface cleaning hard to reach places Oh. Secondly, by quickly wielding a brush, you can feel like an experienced archaeologist or a real Indiana Jones.

Decorative bottles look beautiful, but require a lot of attention during maintenance. To make your accessories shine, pour a mixture of soap solution and salt into them. Shake the bottle well, pour out the liquid and repeat the procedure if desired.

Instead of spending hours futilely scrubbing the surface, treat it with a mixture of hydrogen peroxide and baking soda. Wait a few minutes and wash off the resulting paste along with any remaining burnt residue from your favorite pan.

Parents of small children almost every day face the problem of painted furniture and floors. Don't worry too much and think about throwing out all the markers and felt-tip pens in the house. Getting rid of the young artist’s “masterpiece” is incredibly easy - just use regular toothpaste.

Apply it to the painted surface, wait a few minutes and simply wash it off with a sponge.

Cleaning the kitchen is serious business. Prepare your rubber gloves and enthusiasm - in this article we will tell you how to clean the kitchen at home easily and safely for finishing facades, countertops and splashbacks (including wooden ones!).

But, before you start choosing a recipe, we recommend that you familiarize yourself with the following universal rules and recommendations, which are relevant for both painted/unpainted wooden kitchens and laminated, varnished, plastic facades made of MDF and chipboard.

• For those in a hurry, we advise you to go straight to the recipes using the quick navigation (at the beginning of the article).

• The most important rule is: ALWAYS test the cleaner on an inconspicuous area before cleaning your kitchen. Treat it, then wipe clean and dry, wait 1-2 minutes and evaluate whether the color of the coating has changed, whether the shine has disappeared, etc.
• Fatty coating on kitchen furniture is a mixture of dust with fumes and a tiny suspension of fat that are formed during cooking. How older plaque, the more difficult it is to get rid of it. That's why optimal schedule“general” cleaning of the kitchen from grease - 1-2 times a year, “major” - every 2 months using soft remedies and, of course, when the need arises.
• To clean hard to reach areas, crevices or decorative finishing Use a toothbrush soaked in the cleaning product from our article. You can also clean narrow crevices with a knife wrapped in cloth.

• Do not use harsh abrasives; only baking soda, a soft toothbrush, or the hard side of a regular foam sponge are acceptable. This is especially true for wooden kitchens, as well as any painted furniture without a top protective coating.
• When cleaning the kitchen, it is better to use a new sponge with a clean abrasive side. An old, greasy sponge can do even more damage.
• At the end of cleaning, it is advisable to wipe the kitchen: clean with a damp microfiber cloth and dry with a clean, dry microfiber cloth. This way you will avoid streaks and residues of the cleaning product itself.
• When cleaning the kitchen, pay special attention to the cabinets above the stove.

For a wooden kitchen (painted with stain, enamel or other types of paint, unpainted but treated with oil/wax/polish/special impregnations/matte varnish, etc.	For all other kitchens: glossy, varnished, plastic, laminated and painted MDF and chipboard sets
A wooden kitchen requires the most delicate care. Most “folk” remedies like peroxide, ammonia, alcohol or citric acid are contraindicated for it, as are ordinary alkali-based household chemicals.	Whether you use expensive or cheap household chemicals, the main thing is that it contains alkali. It is the one that most effectively copes with fat and dirt.
Manufacturers of wooden kitchens recommend washing facades only by special means with neutral Ph or a solution of warm water and soap (dishwashing detergent), diluted in a ratio of 5:95. But what to do if the Fairy solution does not take old fat and stubborn stains? Ideally, thorough cleaning of the kitchen should be entrusted to special cleaning services, especially if the kitchen is relatively new, with expensive finishes. Our recipes are in most cases safe for wood, but there is still some risk in them.	It is convenient to use a spray bottle to clean the kitchen.
When wiping the kitchen, try to move along the grain of the wood, and not against or across. This will allow you to better clean the pores of the material and act more delicately on the fibers.	Before applying cleaning agent to the contaminated area, moisten it, for example, using a spray bottle. Moisture will speed up the chemical process somewhat. reaction and will make cleaning easier.
The rag should not be too wet. Excess moisture is harmful to wooden surfaces.
After washing and cleaning wooden furniture, do not forget to treat it with protective wax, oil or polish.

Method 1. Express cleaning and polishing for advanced cases (soda + vegetable oil)

PURPOSE: wooden UNpainted kitchens and countertops (coated with matte varnish, oil, wax, polish, any impregnations), varnished and laminated kitchens made of MDF and chipboard, aprons made of any materials.

This recipe is especially helpful if you need to bring it back to life. old kitchen or countertop for minimal time and money.

• With its help, you can, firstly, easily remove tightly adhered drops of fat, plaque and stains. Secondly, to “seal” the pores of the wood, protecting it from moisture and dirt. And thirdly, to give the facades a natural shine and brightness. Basically this old one homemade recipe Replaces both cleaning agent and furniture polish.

WITH CAUTION: painted wooden kitchens and light wooden kitchens (oil may yellow slightly).

CLEANING FREQUENCY: It is important that cleaning with soda-oil is carried out regularly - at least every 2 months. The fact is that oil tends to oxidize and lose its protective properties, possibly changing color.

INSTRUCTIONS:

Step 1. Mix 1.5 tablespoons of baking soda with 1 tablespoon of vegetable oil (you can use more in a ratio of 1.5:1).

Step 2. Apply the resulting “scrub” to contaminated surfaces, focusing special attention cabinets in the stove area. The soda will crumble a little, and the oil will be absorbed like polish. You will see that the tree will become cleaner and a little brighter before your eyes.

Step 3: Wipe treated areas with a clean, damp microfiber or soft cloth.

Step 4. Wipe the remaining cabinets from dust and light dirt with a damp cloth. If necessary, you can treat the entire kitchen with an oil-soda solution.

Method 2. How to remove local stains, grease and dirt (6% vinegar + warm water)

INTENDED USE: For all types of surfaces, but with caution for wooden surfaces.

CLEANING FREQUENCY:

INSTRUCTIONS:

Add 6% vinegar to warm water in a 1:1 ratio, then remove dirt with a sponge or spray the product from a spray bottle, wipe the treated area clean with a damp cloth. Finally, dry the surface dry soft cloth or a microfiber cloth.

Method 3. Universal recipe for deep and thorough cleaning (6% vinegar + isopropyl alcohol)

PURPOSE: For spring cleaning old grease and other complex contaminants of painted and unpainted wooden kitchens, laminated, varnished, plastic glossy facades made of MDF and chipboard, all types of countertops and aprons.

CLEANING FREQUENCY: 1-2 times a year.

INSTRUCTIONS:

Step 1. Mix 6% vinegar with rubbing alcohol (isopropyl) alcohol in a 7:1 ratio and add a few drops of liquid soap to the solution.

Rubbing isopropyl alcohol can be purchased at outlets that sell printer supplies, companies that sell fiber optics, and specialty online stores. You should not experiment with other types of alcohol.

Step 2: Wipe the cabinets with the mixture using a microfiber cloth.

Step 3: Now wipe the kitchen clean with a cloth soaked in warm water.

Step 4. Finally, rub a special wood furniture oil that contains beeswax into all surfaces. This action will “seal” the pores and protect your kitchen from stains, dirt, moisture and grease for a long time.

Method 4. Ammonia + warm water

INTENDED USE: For all types of surfaces, but with great care for wooden surfaces.

CLEANING FREQUENCY: if necessary, but not more often than once every two to three months.

INSTRUCTIONS:

Add to warm water ammonia in a 1:1 ratio, then remove dirt with a sponge or spray the product from a spray bottle, wipe the treated area clean with a damp cloth. Finally, dry the surface with a dry soft cloth or microfiber cloth.

Method 5. Hydrogen peroxide + water

INTENDED USE: Only for kitchens, splashbacks and countertops made of MDF and chipboard. The product will help not only clean the kitchen of grease and dirt, but also disinfect the areas treated with it.

• Hydrogen peroxide can be used to clean wooden kitchen, but only if you need to remove mold.

CLEANING FREQUENCY: If necessary.

INSTRUCTIONS:

Mix these ingredients in a 1:2 ratio, treat with the resulting liquid required areas using a rag (it is best to spray the product from a spray bottle).

Method 6. How to remove burnt dark stains from cigarettes (linseed oil)

PURPOSE: To remove burns on unpainted wooden facades, countertops or aprons.

CLEANING FREQUENCY: If necessary.

INSTRUCTIONS:

Rub linseed oil into the stain using a soft, clean cloth until it disappears.

Method 7. Removing stains and scratches (6% vinegar + vegetable oil)

PURPOSE: For mashing minor scratches, removing grease and stains from wooden kitchen furniture, countertops and splashbacks.

CLEANING FREQUENCY: If necessary and with caution.

INSTRUCTIONS:

Rub a mixture of vinegar and vegetable oil (diluted 1:1) into the scratches using a soft, clean cloth until the scratches disappear.

Method 8. Removing difficult stains (6% vinegar + salt)

INSTRUCTIONS:

Make a creamy paste from vinegar and salt. Dip a toothbrush into the toothpaste and lightly scrub the stained area. Rinse off the paste clean water and dry with a clean towel.

Method 9. Removing difficult stains (soda + damp sponge)

PURPOSE: To remove difficult and stubborn stains such as berry juice, ketchup or chocolate from wooden kitchen furniture, countertops and aprons.

INSTRUCTIONS:

Simply sprinkle some baking soda onto a damp sponge and rub the stain. You can also use a soft toothbrush.

Fat deposits affect not only the appearance of the dishes, but also their functionality. Due to the appearance of soot, the food begins to burn, the remains of old fat spoil the taste finished products. Besides, it's unkempt kitchen utensils looks unattractive. Experienced housewives they are fighting the problem with all their might, developing effective ways. Among effective means there is soda, vinegar, salt and other improvised means that are available in the kitchen.

Method number 1. Citric acid

1. Wet the frying pan with plenty of boiling water. Prepare a mixture of baking soda and citric acid, mixing the ingredients in equal proportions.
2. Apply the product to the internal and external parts, leave for 1 hour. If necessary, add water to the bulk mixture to obtain a slurry. She will hold up better.
3. Within 60 minutes, the fat will begin to move away from the walls of the dish under the influence of chemical reaction. When specified time When it expires, scald the frying pan with boiling water and wipe with a sponge.
4. Evaluate the result and repeat the procedure if necessary. Finish cleaning by washing with scouring powder or dish gel.
5. An analogue of citric acid is juice citrus fruit. It must be mixed with soda until a paste is formed. Then the walls of the dishes are lubricated with the composition.

Method number 2. Salt and soda

1. This method is rightfully considered the most budget-friendly, since the listed components are available in the kitchen of every housewife. Mix the ingredients in equal quantities, dilute with water until you get porridge.
2. Scald the frying pan with boiling water. Scoop up the product with a foam sponge and spread the paste over the walls with a greasy coating. Leave for 1 hour; to enhance the effect, you can wrap the dishes in cling film.
3. When the time is up, wash off the excess product with boiling water. Rub outer part frying pan with an iron sponge, and the inner pan with a soft cloth. If the result is poor, the procedure can be repeated.
4. If the plaque is too strong, you need to use soda without salt. To carry out the procedure, take 900 g. product, dilute with 1 liter of water, pour into the cavity of the container. After 2 hours, wash as usual with detergent.

Method No. 3. Dry mustard

1. If the old fat deposit is not too dense, you can use mustard powder. Place the dishes to be cleaned on the stove. Heat to maximum heat, scald with boiling water.
2. Pour several packets of dry mustard into the cavity, fill with hot water and leave for 3 hours. Stir the mixture periodically and try to scrape off the fat with a wooden spatula.
3. After the specified period, wash the dishes in the usual way, evaluate the result. If you are not satisfied with it, perform the manipulations several more times.
4. To clean glassware or ceramics, use a 1 liter solution. boiling water and 250 gr. mustard powder. The container is filled with the composition and then infused for 24 hours. During this period, all the fat will peel off, you can easily remove it.

Method number 4. Vegetable oil and soap

1. If the fat deposit is relatively fresh, prepare a hot mixture. To do this, grate or otherwise grind half a bar of tar soap and pour in 100 ml. boiling water
2. When the shavings dissolve, pour in 60 ml. vegetable or corn oil. Stir, now add the amount of soda that will bring the product to the state of porridge. As a rule, about 200 grams are required.
3. Scald the dishes with boiling water and spread the mixture over it. Place the container on the fire, heat it up, turn off the burner. Wait about 45-60 minutes, then remove the loose plaque with a sponge.

Method No. 5. Glue and laundry soap

1. Fat removal is carried out by boiling. To do this, you need to prepare a wide enamel basin or bucket in which the frying pan will be placed.
2. Pour water into a container and bring to a boil. Add 175 ml. PVA glue, mix. After 2 minutes, add shavings of one bar of laundry soap, stir again until smooth.
3. When soap base dissolves, place the dishes with the coating inside. Cleaning does not take place immediately, the cooking time is 2.5 hours, and when complex pollution- from 3.5 hours.
4. Add hot water periodically if it boils over. The pan should sink in the liquid. When the specified time has expired, turn off the burner. Remove the dishes, clean the deposits with a sponge and dishwashing gel.

Method number 6. Soda

1. Prepare a wide basin or bucket that can be placed on the stove. Pour boiling water into the cavity, add soda at the rate of 1 liter. liquid accounts for 70 g. bulk composition. Therefore, if 10 liters are poured into a bucket. water, you need to add 700 gr. soda
2. Place the dish with the solution on the fire, bring to a boil, and place the frying pan inside. Carry out the digestion for 1-1.5 hours. When the time is up, remove the bucket from the heat.
3. Take your time to remove the frying pan; let it sit in the solution until the liquid cools. After this, take out the dishes and remove the grease with a paste of soda and water.
4. Rinse the container with hot water and wash with liquid. If necessary, repeat the procedure, increasing the amount of sodium bicarbonate to 80 g. for 1 l.

Method No. 7. Table vinegar and citric acid

1. The technique is designed not only to eliminate the old fatty plaque, but also removing yellowness from the walls of food containers. To start manipulating, pour 1 liter. water into a saucepan, put on fire.
2. When the first bubbles appear, pour in 150 ml. vinegar solution with a concentration of 6-9%, add 30 g. citric acid. Stir the mixture until the crystals are completely dissolved.
3. Turn off the burner and place the pan into the hot mixture. Soak for 1-1.5 hours, during which time the fat will partially come off. If it is not completely removed, scrape off the residue with a hard sponge.
4. There is also an abrasive treatment. To do this, you need to prepare a paste mixture of vinegar and citric acid. Scoop it onto a sponge and wipe off the grease mechanically. Finish cleaning with regular dishwashing.

Method No. 8. Vinegar and baking soda/salt

1. As can be understood from the name of the method, the product is prepared from table or apple cider vinegar(9%) in combination with soda or salt. Regardless of this, preliminary preparation is necessary.
2. First, soak the pan in hot water with the addition of dishwashing gel, leave for 50-60 minutes to remove the fat. After this, combine baking soda or salt with vinegar to form a paste.
3. Rub the product onto the outer and inner walls of the dish and wait a few hours. Next, try scraping off the fat with a sponge; if necessary, scald the pan with boiling water. Finish cleaning with standard washing.

Consider removing old fat using citric acid, baking soda, PVA glue, salt, table vinegar. If desired, combine the options you like with each other. Take precautions to protect your skin and respiratory tract.

Video: how to clean dishes from grease and burnt marks

Cooking in the kitchen is always accompanied by splashes of oil and fat. The emitted steam containing oils condenses on the surface of walls and furniture, and dust settles on it.

Over time, a thin, imperceptible layer becomes not so thin and noticeable. The question arises, how to clean the kitchen from grease?

Even a fresh stain cannot be removed without the help of detergents. What kitchen grease removers are effective?

They come to the rescue different tips. It turns out there are quite a few ways. Good, different, accessible.

If the contamination is not severe, you can spare your hands and refuse strong household chemicals. Baking soda powder and laundry soap will remove plaque and stains. When these simple components are no longer effective, it’s time to move on to radical measures.

Let's take a closer look at how to clean grease in the kitchen and what is needed for this.

• Soft rags;
• Sponge;
• Rubber gloves;
• Detergents and cleaning products.

We highlight the following cleaning options:

• Household chemicals;
• Available means at hand;
• Cleaning with steam.

Household chemicals

Cleaning with household chemicals is the fastest and most popular method.

There is definitely something to do to remove grease in the kitchen, for example:

• Schumann,
• Silit Bang,
• Mister Muscle
• Santry,
• Sanita...

The choice is very varied. A huge variety of manufacturers. There are also oven cleaning liquids that perfectly dissolve oils and will clean any clogged surface.

All of them are effective, you just need to choose the right option.

One of the options for cleaning the kitchen from grease:

• Rinse the area of ​​contamination with warm water;
• Apply detergent, cleaning agent;
• Wait a while (until the plaque dissolves);
• Rub the stained area with a sponge, brush, or metal sponge;
• Remove any remaining cleaning agent from the surface;
• Rinse with a damp sponge until required cleanliness;
• Repeat the process if necessary.

But you need to clearly distinguish that there are cleaning products for metal, glass, tiles, and others for furniture. Each package comes with instructions and must be followed.

MDF-based facades, finished with plastic or film, can be washed with cleaning products without abrasives and chlorine. It is better to use cleaning components intended for furniture. It is recommended to clean with a solution of a neutral detergent, in a small amount, dissolved in water.

Attention! Be sure to use gloves, because strong detergents are toxic.

Treasure your own hands and do not neglect safety precautions when working with chemicals. If you have allergies or bronchial diseases, it is better to refrain from using aggressive agents.

Note! After this event, it is recommended to ventilate the room.

Available means at hand

How to remove grease in the kitchen or how to remove grease from kitchen furniture in the easiest way in a simple way? This is cleaning using laundry soap and baking soda.

Important! The soda should not completely dissolve! It should remain powdery and act as an abrasive in order to “scrub” dirt with its particles.

The surface is first washed with warm, soapy water. Then rubs it with a sponge with the addition of soda. When the fat comes off, you just need to wash off its remnants.

This method is also suitable for washing metal surfaces, tiles. You can replace laundry soap with dishwashing liquid, which will also dissolve the oils. Baking soda is a soft abrasive, soluble in water.

Important! You cannot use soda to clean kitchen furniture with a glossy, enamel, or polished finish! You will scratch the surface.

How to clean kitchen furniture from grease - another method.

• take soda and vegetable oil in a ratio of 2:1;
• mix to a creamy paste and apply to contaminated areas with a sponge (you can use a brush);
• rub thoroughly;
• After this procedure, all that remains is to wipe the surfaces with a damp cloth.

Pay attention! It would be a good idea to place paper under the surface to be cleaned. Pieces of baking soda and oil will fall during the cleaning process.

You can use ammonia diluted in water. 1 tbsp. ammonia per 1 liter. water. Pour into a water spray bottle and apply to dirt. After a few minutes, scrub with a sponge or brush.

It must be remembered that dry mustard and vinegar are also good, natural fat solvents. In the absence of other means, they can perfectly clean surfaces.

Steam cleaner - a reliable assistant

Cooking food causes grease to accumulate in the kitchen, with grease deposits forming almost everywhere. It is present on household and electrical appliances, tiles and panels, kitchen furniture, sinks and plumbing fixtures, ceilings and walls.

The longer fat accumulates, the thicker and stronger the fat layer becomes, the more difficult it is to wash off the dirt. You can clean a greasy kitchen with a special household chemicals or folk remedies.

In this article we will look at which product is better to choose. Let's find out how to wash off grease in the kitchen quickly and effectively, and how to do it correctly.

Six ways to clean grease in the kitchen

1. Special products for cleaning grease in the kitchen. IN in this case for each material it is important to choose the right cleaning composition, since each material requires compliance certain rules cleaning. Use products suitable for of this type products and follow the instructions. Do not exceed the recommended volume and concentration, otherwise you will damage the surface. When cleaning, wear rubber gloves and open a window or window; after completing the procedure, thoroughly ventilate the room;
2. Mustard powder is an effective fat solvent, which is used to clean sinks, refrigerators, stoves, kitchen units made of plastic or panels with protective coating. This method is not suitable for natural wood. Rinse the contaminated area with clean water and sprinkle with mustard powder. Then wipe with a dry cloth; as a result, grease and dirt will remain on the cloth. Remove any remaining product with a sponge or cloth. warm water;
3. Soap solution with soda is the fastest and affordable way clear kitchen utensils And household appliances. Grate a piece of laundry soap on a coarse grater and dissolve in warm water until foam forms. Wipe the areas with the resulting solution and immediately apply large number soda Wipe the surface thoroughly with the sponge again and leave the soda on for twenty minutes. Then rinse off the product with a clean damp sponge and wipe dry. Do not use baking soda on glossy or varnish coatings, otherwise it will leave scratches!;
4. Baking soda and vegetable oil are suitable for cleaning wooden furniture in the kitchen and other wooden surfaces. To do this, mix oil and soda in a ratio of 1 to 2 and apply the resulting solution to contaminated areas. Then brush the surface with a soft brush without strong pressure. Leave the mixture for ten minutes, then wipe with a damp cloth and wipe dry. This product will provide gentle care and will not damage or scratch the countertop, cabinets or wooden utensils. By the way, wooden dishes!;
5. Ammonia is suitable for cleaning plastic or glossy kitchen from fat. Dissolve a tablespoon of ammonia in a liter of water and apply the resulting composition to greasy surfaces. Then remove the solution with a soft cloth and wipe the products dry;
6. Vinegar and alcohol - universal remedy, which cleans and disinfects kitchen furniture, appliances and utensils. To prepare the solution, add vinegar and alcohol to water in a 2:1:1 ratio. Add a third of a teaspoon of any essential oil and mix. Pour the resulting composition into a spray bottle and treat the desired surfaces with the product. Leave the mixture on for 15 minutes and then wash off the residue with a damp cloth or sponge. Alcohol and vinegar will clean greasy spots and pollution, eliminate bacteria and fungus, and essential oil will kill the pungent odor and leave a light, pleasant aroma.

Cleaning the kitchen with steam

Original, effective and safe way kitchen cleaning - use steam. This method is applicable to almost any surface, including walls and ceilings, kitchen furniture and equipment.

Steam perfectly removes greasy and burnt stains, traces of oil and scale. He eliminates bad smell, restores shine glass surfaces and stainless steel sinks, kills fungus and harmful bacteria. Let's look at how to clean grease in the kitchen using steam.

In this procedure, a steam generator is used, into which water is poured and heated to approximately 150 degrees ( medium mode) and treat the surfaces. This is a safe cleaning method for both surfaces and humans, since the steam generator does not cause allergies.

In addition, it is suitable for cleaning upholstered furniture and curtains, tiles and porcelain tiles. A steam generator is indispensable for things that cannot be ironed.

But remember that MDF panels cannot be processed with a steam generator! Also, abrasive compounds, acidic and alkaline solutions, products containing chlorine and sodium, rough and hard sponges, brushes.

We looked at the main means of cleaning old grease in the kitchen. And then we will consider the methods applicable for various products and materials.

How to clean kitchen furniture from grease

• Furniture made of natural wood is washed with a soft damp sponge and a mild soap solution. Natural wood You can also clean it with a steam generator. Then wipe the surface with a clean damp cloth so that there are no soap stains and wipe dry with a dry cloth. Process periodically wooden products protective wax polish for wood;
• Kitchens made from MDF panels are washed with a weak soap solution or a weak alcohol solution. After treatment, wash the surface with a clean damp cloth and wipe dry. Also, at the end, a polish containing wax is periodically used;
• A matte kitchen is washed in the same way as MDF panels, but without finishing with wood polish;
• Wash glossy facades kitchens using a mild soap solution. After this, rinse off the composition with a damp, clean cloth and wipe the product dry. Special varnish and paint, PVC film or acrylic coating will help restore the shine and gloss of such a surface;
• Plastic kitchens are washed with a mild soap solution or detergents containing a small amount of alcohol or lemon. Cleaning agents for glass, windows and mirrors are also suitable. After washing, rinse off the composition with a clean damp cloth and wipe dry.

How to clean greasy kitchen walls

The walls in the kitchen are usually covered with wallpaper, and in the installation area kitchen set and sinks are tiled. Wallpaper cannot be washed, unless it is special waterproof, washable wallpaper. In this case, the surface is cleaned with a vacuum cleaner or wiped with a soft, damp sponge, which is thoroughly squeezed before use.

You can clean kitchen tiles with soapy water. To delete heavy pollution, grease stains and salt stains, use vinegar 6% or citric acid. By the way, vinegar will not only clean the surface, but also disinfect the surface and remove fungus and bacteria.

When cleaning, use a cloth, a soft sponge, or only colorless brushes, otherwise colored ones will leave colored fluff, which is then difficult to remove. After processing tiles rinse with clean water and wipe dry with a soft microfiber cloth.

Baking soda will help remove old and stubborn stains. To do this, mix the product with a small amount of water and wipe the contaminated areas. Rinse off the composition with clean water and wipe dry. But clean the tiles very carefully, as this solution can scratch the products!

Ammonia will return shine, cleanliness and attractiveness to products. appearance. Alcohol is diluted in the proportion of a tablespoon per two liters of water. Spray the mixture and leave for five minutes, then rinse with clean water and wipe dry. You can clean the grout between tiles in the kitchen using an old toothbrush using the products listed above.

Cleaning a greasy kitchen ceiling

The ceiling, especially above the stove, also gradually accumulates grease and dirt. Cleaning of products depends on the type of materials used or surface treatment. Painted or plastered ceilings are cleaned using dry methods using a soft brush or a vacuum cleaner with a special pad.

Heavy dirt and grease stains on a painted ceiling are removed with a solution of water and vitriol, which is applied only to contaminated areas. Plaster cannot be washed with water! If stains cannot be cleaned using the dry method, renew the layer of plaster.

The wooden ceiling is washed with a damp and well-wrung cloth using a weak soap solution or plain warm water. After treatment, the wood is wiped with a soft, dry cloth.

Ceilings finished with plastic can be washed with any means that do not contain solvents, chlorine or abrasives. Good fit detergents for windows, glass and mirrors. , soap solution, soda, hydrogen peroxide, ammonia or acetone will help restore whiteness.

Ceiling tiles are washed depending on the type of materials. Laminated boards can be cleaned with a mild soap solution and a soft cloth, non-laminated boards can only be cleaned using the dry method using a brush, cloth or vacuum cleaner with a special attachment.

Mirror and glass tiles Wash with special products for cleaning mirrors and glass. Do not use for ceiling tiles a lot of water!

To wash suspended ceiling, use a regular soap solution with warm water or special alcohol-containing polishes with an antistatic effect, which return shine and gloss to the surface, do not leave soap stains, do not deform or damage the material.

For a glossy stretch ceiling, you can also use classic cleaning compounds for mirrors and glass. But such means are not suitable for matte ceiling! How to wash a suspended ceiling in the kitchen without streaks, read.

When washing any type of ceiling, do not use abrasive detergents and bleaches containing chlorine, soda and hard powders, acids and alkaline solutions, hard sponges, washcloths and brushes!

How to clean grease from pipes and plumbing

To clean the faucet and pipes, choose only those products that are suitable for this material. Do not use rust removers in the bathroom, bleaches, products containing chlorine and various acids, or powders. Otherwise, scratches, small cracks and dark spots.

For regular cleaning, use a regular soap solution with laundry soap. For general cleaning and heavy-duty cleaning, use baking soda to remove impurities. Wipe off dirt with a sponge and soda and rinse with clean water. You can also dilute the 9% vinegar solution in half with water or wipe the products lemon juice. Do not use citric acid!

You can wash pipes, taps and faucets with a sponge or cloth. For hard-to-reach areas, use an old toothbrush. Don’t forget about specialized cleaning compounds for pipelines, taps and plumbing.