DIY shoe rack made from clapboard. Outdoor shelves - metal and plastic. Making a shoe rack with your own hands

Date: 07/21/2016

The guest's acquaintance with the apartment begins in the hallway. Therefore, the owners are trying to make this room more comfortable. Often, the hallway is a small room where you need to compactly place a lot of clothes and shoes. Here comes to the aid of the owners shoe rack, which will fit perfectly even V small hallway. The main thing is that it is the right size, selected based on the square footage of the room, the number of people living and visiting. A correctly selected shoe shoe helps to improve the space and preserve appearance shoes, protecting from dust, light and deformation.

A galosh for storing shoes is very necessary so as not to bring dirt into the house

The history of the appearance of galoshes and shoe boots

There are two theories about the origin of galoshes.

According to the first version, rubber shoes, called galoshes, were invented by the Indians to protect their feet during rain. Subsequently, they invented a stand for protecting and storing galoshes.

Galoshes great option shoes in the rain

The second version of the appearance of rubber safety boots says that this product was invented by an Englishman who wanted to protect expensive leather shoes from dirt. When the invention gained popularity, cabinets and racks for compact placement and storage of galoshes.

Wooden shoe shoe with shelves for each shoe

Many people are interested in how to correctly pronounce galoshes or overshoes? It turns out that both words are allowed and considered correct in the Russian language.

What should you consider when buying a shoe shoe?

In order for the purchased shoe shoe to become a reliable assistant in the difficult task of storing shoes and to perfectly complement the interior of the hallway, it is necessary to decide on the color and size before purchasing. And it’s better to do this at home, so that later when purchasing you don’t have to wonder whether this cabinet will fit into that corner. And you will decide on the appearance in the store, looking at the huge assortment of shoe boots on offer.

A few general tips that you should definitely take note of before purchasing a shoe shoe.

1. If the hallway is dark, then a light-colored shoe rack will make the room brighter and add light.
2. For big family It’s better to look for a spacious shoe storage device. If you choose a shoe shoe of the wrong size, it will take up space and there will be nowhere to place your shoes.
3. It is better to choose a narrow shoe cabinet for a long hallway, and increase the storage space due to the height. It needs to be secured to the wall, otherwise the weight of the folded shoes will outweigh it.
4. For small room You may consider purchasing a cabinet or bookcase with wheels so that it can be easily moved, freeing up space for passage.
5. If the size of the hallway does not allow you to place a large closet for the whole family, then it is better to purchase a bedside table small sizes and use it to store shoes for the season, and put the rest of the shoes in another place.

For big seven it is better to buy a large shoe shoe

Advice: if you recycle old, torn, unnecessary, tight shoes that are kept just in case, you will have much more free space in your shoe box.

What material is the shoe shoe suitable for the hallway?

When choosing a shoe stand, the first thing you should do is evaluate the material from which it is made. The lighter and more practical the shoe shoe, the longer it will last and the easier it is to keep it clean.

• Shoe shoe made from chipboard is the most inexpensive option. A product made from this material is lightweight and does not take up much space. Ideal option for a small hallway. The only negative is that when wet, chipboard can crack, peel and lose its appearance.
• Stand made of natural wood suitable for a spacious hallway. Wooden shoe racks are massive and durable. This piece of furniture will add luxury to the room. But the tree has big drawback- it absorbs moisture, so you will have to store dry shoes on a wooden shelf or treat the surface special composition for protection against moisture.
• A plastic shoe rack is the most inexpensive option for a shoe stand. It is practical, does not absorb moisture and is easy to clean. The only disadvantage of plastic is fragility.
• Glass shoe stand. Original, nice solution for the hallway, but absolutely not practical. Glass will have to be washed and polished frequently to maintain its shine and attractive appearance. A galosh made of thin glass will be fragile, while a shoe made of thick glass will be massive and difficult to move.

• A metal shoe rack will last a long time, but it will have to be periodically tinted to protect the metal from corrosion and rust. And if the sheet from which the shoe cabinet is made is thin, then it is easy to deform.
• The wicker shoe shoe will become wonderful decoration any hallway. It is quite light and provides good ventilation, which has a beneficial effect on shoe storage.
• Galoshka made of stone and brick. Expensive looking shoe stand. It is quite rare. Suitable for large hallways. Very massive. Brick overshoes are used where the interior of the room allows, for example, next to brick wall or as an extension of a brick ledge. Brick shoe racks are not sold in stores; they are usually handmade to order.

The metal shoe shoe is very durable

Varieties of shoe racks for hallways

In furniture stores you can choose a shoe shoe to suit every taste, taking into account preferences and wishes.

Tip: if you couldn’t find a shoe shoe in the store the right size, then can be made to order. Made according to the customer’s measurements and preferences, it will fit perfectly into the interior and will not clutter up the space.

Devices for storing shoes are available in the form of chests of drawers, cabinets, pencil cases, cabinets, drawers, and hanging structures.

Hanging galoshes save space

What types of shoe boots are most convenient?

• Closet. It may seem strange to some to store shoes in the closet, but if the family is large, then this is the most suitable solution V in this case. Winter high boots and roller skates, not just sneakers and sandals, can easily fit into the closet. Although such a storage system has a number of disadvantages, it is quite cumbersome, not suitable for a small hallway, and it’s difficult to get shoes from top shelves quite difficult.
• Dresser. Storing shoes in a chest of drawers is quite problematic. Despite all its impressiveness, it won’t fit many shoes, shoes and boots, but it will take up plenty of space in the hallway. In addition, in small room, the chest of drawers will simply not be appropriate.
• Pencil case. Putting shoes in a pencil case is of course convenient, but if you look at it from the point of view of aesthetics, then the shoes, when long-term storage, get dusty, and such a design will not be able to hide your old favorite boots or worn-out slippers. It is more suitable for temporary storage of seasonal shoes. And on long term It’s better to put your shoes not in open form, but in boxes.
• Whatnot. Convenient, lightweight, does not take up much space, suitable for a small hallway, small family and for storage summer shoes.

Shoe rack can be high, as a locker

A wooden shoe shoe with a seat is very convenient for putting on shoes

Galoshnitsa - whatnot can be very light in design

• Cabinets and small drawers. Very comfortable, but you won’t be able to store a lot of boots in them. The cabinets are suitable for use as seats that are comfortable to put on your shoes.
• Suspended structures. Such devices are usually attached to a wall or door, are compact, take up little space, and are suitable for storing light summer shoes. It is worth noting that slippers hanging on the wall are not suitable for every interior.
• Shelves. A shelf shoe storage system is more appropriate for a dressing room than for a hallway, because shoes placed on shelves will resemble racks in a store, depriving the room home comfort. If there are one or two shelves, then they will look good under a coat rack.

How to make a shoe shoe shoe with your own hands?

If you couldn’t find your dream shoe shoe in the store, you can build one from improvised materials. Such an original and beautiful product will fill your home with warmth and comfort. Anything in the house can be used as a material for making, the main thing is to use your imagination; bottles, cardboard, plywood, leftover pipes, leather, foam rubber and boards will do.

Shoes can be made from scrap materials

A galosh can be made from old fruit boxes

Let's look at a few examples of making overshoes with your own hands

• If you bend the cardboard into a triangle and secure it with tape in the form of a slide, you will get a beautiful and roomy shoe shoe. Even a child can handle this job. This shelf has two disadvantages:
• For those who know wood carving, it will not be difficult to make a carved cabinet that is not inferior in design to the purchased one. Carved benches with a compartment for shoes look beautiful in the hallway.
• You can use buckets to store shoes, paint them and place them on shelves or under a bench. Old shopping bags are also suitable for this purpose.
• Old wooden boxes You can paint them, mount them on the wall like shelves and place your shoes in them.
• Light enough to tip over easily
• may get wet, use a shoe shoe for dry shoes.
• From the remains of the pipe and plastic bottles turn out good places for storage if they are connected and mounted on the wall. Bottles must first have their necks cut off.
• Boxes of various sizes are also suitable for storing shoes, the main thing is to decorate them beautifully and place them tastefully.

Galoshka made of cardboard in the form of triangles

If the family has Small child, then in the new shoe shoe it is necessary to allocate a cabinet, drawer or shelf for his shoes. You just need to do this in a place from which the baby can easily, easily and safely get the shoes. Together with your child, you can decorate the shelf with an inscription or appliqué, and while working, tell the child that sandals should be placed here after a walk. This will help teach your baby order.

The main thing when purchasing a shoe shoe is to remember that it is needed for convenience, not for beauty, and there should be enough space in it to be enough for the shoes of all family members. Then we can safely say that a necessary and useful thing has been acquired.

Galoshnitsa in the hallway

Shoe rack for the hallway 51 photo ideas:

Caring for shoes piled up is problematic. To prevent boots from getting dirty, suffering from dampness and dust, you need to install. The easiest way is to purchase ready-made solution, but this is not always possible.

Here we will look at an alternative route - manufacturing is not simple, but shoe racks with my own hands. We have to select tools and materials, decide on sizes and internal device. At the end you will find diagrams, drawings and photographs.

The amount of material and set of tools will depend on the chosen design. To make a wooden cabinet you will need the following tools:

• drills (confirmed, 5 or 8 millimeters);
• tape measure (square, ruler) and pencil;
• hammer;
• screwdriver (can be replaced with a drill);
• 4mm hex wrench;
• awl;
• Forstner drill;
• template (its task is to mark for drilling).

Of course, if you are going to make a cardboard shoe rack, the set will be different. But more on that later.

Do you want a more durable and cheaper shoe rack? Use laminated chipboard sheets as the material. In addition, you will need accessories:

• pens;
• euroscrews;
• shoe rack mechanism (if provided);
• screws;
• decorative supports (you can do without them, but with supports the structure will look more solid).

For the carousel shelf you will need metal pins (round shelves are attached to them) and a vertical pin. Special tools(except for a drill) you won’t need it at all. The complete list of materials for the “carousel” looks like this:

• round pins (holders);
• fiberboard disks;
• plastic tips;
• steel tube;
• metal corners;
• screws (plus lock washers for them);
• half a liter of primer;
• machine screws (together with nuts and washers);
• acrylic paint.

More comfortable solutions are also possible (including leather upholstery). Read about this below, as well as about the sizes of shoe racks you create with your own hands.

Product dimensions

The dimensions of the product depend on the size of the hallway and the needs of the owner. For single people, a small locker nestled in will be enough, but a family of 3-4 people needs a full-fledged shoe rack designed for 20-30 pairs.

Store-bought models often turn out to be made in China, whose inhabitants have a strange penchant for miniaturization.

• Shoe racks can also be wide. It is difficult to make a cabinet or make one yourself, so it is better to limit yourself to a simple cabinet. The product requirements are:
• functionality;
• ergonomics;
• good ventilation;
• aesthetics;

capacity.

• A minimalist shoe drying rack does not require a lot of space. The wall-mounted model is quite small-sized and simple. The parameters can be as follows:
• facades (shaped MDF boards or STRAIGHT chipboards) - 119.5x44.7 centimeters; sidewalls (standard furniture panels
• ) - 118.4x32 centimeters;
• back wall (thin hardboard) - 119.5x89.5 cm;

drawers (can be purchased at furniture stores) - 86.8x10.

There are also more compact solutions. Most of them are mounted on the hallway wall or placed inside a wardrobe (“carousel”). The dimensions of such structures are much smaller. To choose the ideal option for your hallway, we recommend using special design programs — you can download them and install them on your computer. There are also finished projects

, including diagrams, drawings and detailed tables with lists of parts.

Photo of a shoe cabinet in the hallway with your own hands

How to make a shoe rack yourself Exist different types

homemade shoe designs that allow you to optimize the hallway space. Some of the solutions are quite complex - for example, a carousel shoe rack. We will not follow the path of complexity and will deal with the simplest shoe cabinet designs made from cardboard and wood. Let's look at an example hand assembled narrow shoe rack

• for a bachelor's apartment. This design is designed for a small number of pairs of shoes, and during assembly you will need a drill, a hacksaw and a screwdriver. Here is a list of materials you will need:
• moisture-resistant plywood (five sheets of 12 mm thickness);
• long shoe brushes (the quantity depends on the length of the shoe rack, the bristles should be stiff);
• wood screws;
• spikes (6 pieces, 6 mm each);
• acrylic paint;
• construction adhesive (for wood);
• brush;
• dowels

The shelf can be painted with gouache or acrylic - it doesn’t matter. The brushes here serve as shoe holders. The assembly order is as follows:

1. The block with brushes is assembled. Through holes (6 pieces) are drilled in the plywood edge.
2. Apply glue to the spikes and insert them into the resulting holes.
3. Similar “holes” are made in plywood C, which is connected to sheet B. You can press the parts with clamps - then the glue will set faster.
4. Element D is attached to an existing structure.
5. The handles of the brushes are cut off (you can buy brushes without handles - it will be cheaper).
6. A pair of through holes are drilled into the brushes, after which they are fastened along the entire length of the structure (a centimeter from the edge) using short self-tapping screws.
7. Unused parts A and E are drilled.
8. All shelf fragments are fastened with self-tapping screws.
9. The penultimate touch is painting the shoe rack. You can involve little family members in the process. Decoupage and other creative experiments are welcome.
10. The hallway wall is being drilled. Dowels are installed and the shelf is hung.

We have also prepared several for you useful videos who will teach you how to create shoe racks with your own hands.

Narrow shoe racks - The best decision for small hallways? If you don't believe me, watch the following video:

The following video will also tell you how to assemble a shoe rack with your own hands:

Do you want a shoe rack for more comfortable removal of boots? Then the following video will definitely be useful to you:

You can create hanging and floor-standing shoe racks with your own hands from cardboard. The hanging shelf is made of thick, high-strength cardboard; it can be used to store demi-season pairs of shoes. You will need an unnecessary box (it’s easy to ask for one in stores) and other things:

• furniture knife (can be replaced with large scissors);
• wood glue;
• large tape;
• Ruler and pencil;
• stapler (the staples for it should be large in size).

The cardboard is laid out on flat surface, after which you divide it (using a pencil) into several rectangular sections. The height will be 30 centimeters, and the length will be comparable to the width of the cardboard. The rectangle is divided in half and bent - side walls must be scored equal triangles(the vertices will point down).

By bending the rectangles, you form boxes. Cover their edges with tape to protect them from moisture. The drawers are inserted into the grooves of the “neighbors” and secured using wood glue- this is how you get a single design. Attach hooks on top and secure the product to the wall.

A floor-standing shoe rack is formed in a similar way, but it is not attached to the wall.

The disadvantage of this solution is its extreme instability. Cardboard is a lightweight material, so floor shoe racks can be knocked over by hitting the edge of a coat.

Cardboard shoe rack

Made of wood

Using wood and metal strips as the main components, you can build a fairly stable shoe rack that deserves its place in the hallway. You can save money by replacing wood with chipboard or fiberboard. The thickness of the sheets should be about one and a half centimeters.

You will also need special strips made from of stainless steel. The shape of the planks is cylindrical. In total you need to get eight of these parts.

Please note: the cross-sectional diameter of the planks is two centimeters. Fasteners and clamps will also be useful to you (flanges and screws). Here is a list of tools for making it yourself:

• pencil and ruler;
• screwdriver;
• Sander;
• jigsaw;
• nails;
• compass;
• hammer.

So, how to make a shoe cabinet out of wood with your own hands? The process begins by cutting out the back and sides. Usually the height of the shoe rack is arbitrary, and the width is 23 centimeters. This will allow you to make a two-level shoe rack.

The back wall is cut out at the very beginning - it will consist of a pair of thin strips. The width of the shelf should be 20 centimeters. After cutting out the fragment with a jigsaw, you need to sand the edges and work on the side walls.

First you need to mark a couple of rectangles of the same type. Use a pencil, compass and ruler to mark the front roundings. The rounds are cut out with a jigsaw, then the walls are sanded and fastened into a single section.

The final assembly of the shoe rack with your own hands. Here's the procedure:

1. The flange attachment points are marked.
2. The side walls are fastened together using planks.
3. The rear walls are nailed to back side(end) of the sides.

If desired, the scheme can be complicated. As an option, replace the laminated chipboard with wood and upholster top part skin.

Photos of shoe racks that were created with your own hands

White color Simple and tasteful Old pallet Banquette Eco-style

Drawings, diagrams, photos

We move from general descriptions to visualized specifics. We have placed all the diagrams and drawings of the structures described above in this section. Here you will also find photographs of finished shoe racks and individual assembly stages.

Below we have prepared drawings, diagrams and photos for you that will tell you how to make a shoe rack in the hallway with your own hands.

DIY shoe cabinet drawings

Low cabinet
Open cabinet

Shelves from furniture stores do not always fit into the required size. Therefore, today we will try to make some original shoe shelves with our own hands.

The simplest shoe rack from old furniture

First you need to cut the boards into blanks. Standard height between shelves - 23 cm. width should be such that it fits both women's and men's footwear– it should be 30-35 cm. Depending on the number of family members, the size of the shoe rack and its height may vary. The shelves in it are installed at different heights: for children's and adult shoes, shoes, boots and sandals, a large shelf for boots.

Let's say we need to make a shoe rack measuring 100x35x46 cm. For it we will need three side walls measuring 35x45 cm, top board 100x35 cm and three shelves 47x46 cm.

Shelf 100x35x46 cm

If the surface is too worn, it should be cleaned first. varnish coating from boards using sandpaper or a grinder with a special attachment. Since this creates too much dust, it is better to carry out work on the balcony. Damaged areas are puttied.

The boards are fastened together furniture corners using small self-tapping screws 12 mm long. A thin sheet of HDF is attached to the back of the shelf, which is used to line cabinet furniture.

Fastening the shelves

Advice. So that the shelf can be moved close to the wall, in the places where it adjoins the baseboards, the lower part of the side walls must be cut at an angle of 45°.

Shelf made of wood or wooden slats

The principle of making a shoe rack from wood is similar to the previous one. The only difference is in the fastening. To securely fasten the boards together, holes are drilled into the side walls. holes for inserting screws. The same holes are prepared on the crossbars on the end side.

The screws are screwed into the board so that their heads are slightly recessed into the wood by a couple of millimeters. The holes are leveled with sandpaper and puttied. You can also hide the holes using plastic plugs - they are sold in any furniture store.

To strengthen the product, additional fasteners are attached to its rear ends. metal corners. Before starting work, small irregularities are smoothed out with a grinder, grinder or emery cloth.

Connection of bars

Shoe rack made of wood

You can darken wood using water-soluble or alcohol-based stains- a dye that gives wood specific color. You can replace it with a regular one potassium permanganate– it paints excellently wooden surfaces. To ensure an even coating, the wood must be slightly moistened before painting. After painting, the product is varnished and thoroughly dried.

Stain treatment

Another option wooden shelf for shoes

Advice. Shoe shelf can be turned into original ottoman, if you cover its upper part with foam rubber and cover it with fabric of a suitable color.

Ottoman-shelf for shoes

Original round shelf

1. To make a rounded shoe rack using a jigsaw, you need to cut out round blanks. Their diameter should be about 600 cm. You can replace the compass with a nail driven into the center, with a pencil attached to it on a cord. After cutting, the edges are carefully sanded with sandpaper or a sander.

2. Now let's start manufacturing crossbars. You will need 8 of them (4 for fastening between the lower and middle workpieces and 4 for installing between the middle and upper). The size of each of these parts is 160x200 mm. After cutting, they are also polished.

3. On the underside of the round blanks we mark the places for attaching the partitions. To do this, draw two straight lines with a pencil at an angle of 90° to each other. The intersection should be exactly in the center of the workpiece.

4. On each line we drill 4 holes for inserting screws. We prepare the same holes at the ends of the crossbars.

5. Now all that remains is to fasten the parts together and paint the shelf in any color or cover it with stain or varnish.

Round shelf

6. You can make a shelf like this angular, if you use only 1/4 of the rounded workpiece.

Corner semicircular shelf

Wall mounted shoe rack

To save space in the hallway, shoe shelves can be made hanging. Attaching them to the wall is easy. To do this you will need a hammer drill or drill, anchors (hooks) L-shaped), dowels, screwdriver and the shelves themselves:

Metal suspension (anchor)

To ensure that the shelves are positioned strictly horizontally, we mark the wall using a building level; We place attachment points on the resulting line;

Drill the required holes in the wall;

We prepare the same holes in the shelf itself;

We insert dowels into them and screw the boards to the wall.

Advice. It is better to drill under small angle to the ceiling. In this case, the fastening will be more reliable, and the shelves will fit more tightly to the wall.

You can also attach shelves to the wall using metal profiles

Shoe rack made of metal pipes and PVC pipes

An original designer shelf made of metal and wood can be made in a matter of minutes. For this you will need:

Wooden, stained or painted boards;

Metal pipes;

Angle adapters;

Connecting couplings (when using pipe scraps of insufficient length);

Plastic plugs for legs;

Rust neutralizer.

Flanges for metal pipes

First, the metal must be treated from rust using neutralizer(special liquid). Next, the pipes are cut into pieces, and metal structure assembled using corner adapters. The pipes are attached to the shelves using flanges. To prevent the metal from rusting in the future, finished design Can be painted or treated with clear or colored varnish.

Shelf made of metal pipes and wooden boards

Such a shelf can also be made from water pipes. PVC pipes . To do this, they are cut into pieces of the required length, through holes are drilled into them for fastening the shelves, and corners, tees or plugs (fitting connections) are put on the ends. All that remains is to cut the boards or fiberboard of the required size and install them on the shelves.

Video: DIY shoe rack (shoe rack)

No hallway can do without one of the many varieties shoe shelves. This could be a place for temporary storage of outdoor shoes that have just been taken off, or it could be a huge pencil case, more like a mini-dressing room, where all the couples who are in this moment worn by the family. The complexity of manufacturing is largely due to its configuration - which simpler model If you are satisfied with its functionality, the easier and cheaper it will be for you to make it.

Shelves for shoes in the hallway

No matter how small the area front door in your apartment (and in Khrushchev and similar layouts this happens all the time), but there simply must be shelves for shoes. To the hallway It’s very easy to bring dirt and dust from the street, and things that just sit on the floor interfere with timely, high-quality cleaning. Even just by lifting your boots or moccasins a couple of centimeters above the floor level, you make it much easier for yourself to take care of the entire apartment. So, among others, shoe racks are a mandatory element.

Solutions for storing only the seasonal part of the family’s entire shoe collection will always be relevant. If you can allocate space in other rooms for huge dressing rooms, then in the immediate vicinity of the entrance you need to place a small shelf on which it will be convenient to put pairs, and from which they can also be conveniently taken. It is open shelving models that are great solution For small apartments, since their height compensates small area which they occupy. High shelf for shoes in the hallway, buy which you can not only in a furniture store, but also order from a catalogue, is usually a fairly stable structure that is at least four levels in height. It will be very convenient to divide a kind of home skyscraper, allocating one surface to each family member. If you come across a model with hanging shelves that can change their height, then this will be a very good purchase, since on such surfaces in winter you can put high boots, and in the summer, having returned everything to their places, place inside a sufficient number of ballet shoes, sandals and moccasin.

The second idea that is used is small hanging slats or boards on which shoes are fastened not in the usual way, but using a special angle of the structure. You can see similar products in shoe stores, where new shoes are often displayed this way. This way you can see them well, and it’s convenient to store quite a few pairs at the same time. You can see examples of similar products in the photo above, but in order to buy a shoe rack for the hallway With such a configuration, you will have to seriously fool yourself, because they are not sold in stores so often. But you can easily make them yourself if you look at the cross-sectional profile of such a product and repeat it. However, for modern the interior will suit and a small shelf made of thin boards, which, like a folding bridge, is supported by chains. It’s very stylish and convenient, and it won’t be difficult to make at all.

Shoe rack photo

For which there are a lot, the choice always depends not only on the interior style in which your hallway is designed, but also on the amount of space that you can allocate for them. If space allows, then you don’t have to worry too much about choosing, taking a full-size shoe rack, photo examples of which you can see below.

like this buy shelf for shoes it will be easiest; almost every cabinet furniture manufacturer will offer you something similar in their catalogs. And here it’s up to you to choose between the shades of wood, the material, the presence of a variety of decor and other little things that ultimately form the style for your home as a whole. In terms of functionality, you should not assign as many tasks to a shoe rack as to a shoe rack; rather, let it be a separate piece of furniture that has its own appearance.

Mesh models look very interesting, the likes of which you can see above. They are different from standard themes that the space inside is divided into chambers of absolutely equal volume, each of which is designed to store a single pair. On the one hand, it is possible to squeeze much fewer pairs into them than into standard long benches, but on the other hand, a clear order is maintained, the shoes do not deform when they come into contact with each other, and do not get dirty. In addition, this actually has advantages with aesthetic point vision, therefore the presence large quantity identical models may force you to do exactly that buy a shoe rack similar configuration. Minus for home handyman The fact is that this form requires more time and more skillful work, since it will be necessary to measure all the internal planks, mark grooves in them for alignment, and also provide corners or other fittings. You can search the Internet for models of the same functionality, but the cells in which are made using plastic pipes, cut into equal lengths and attached to the walls. But this model has a rather non-standard appearance and is not suitable for all interiors.

All pieces of furniture that occupy an absolute minimum of space are useful, so this is also true for shoe racks. The most successful models closed type They are a small cabinet, inside of which the shelves are located at an angle, which makes it possible to significantly reduce the overall width of the furniture. In the photo you can see what this idea looks like. Buying such furniture is also not a problem, but a problem may be if there is someone in your family with non-standard large size legs. Then his shoes simply won’t fit inside such a shelf, the doors won’t close, and it all will look strange. It is for such large-footed people that we can advise, using the drawings of such cabinets, to make them yourself, according to your own, individual dimensions.

Banquette with shoe rack

The combination of several functions in one thing gives us a wonderful piece of furniture for the hallway - bench with shoe rack. It was customary to call a banquette small sofas without a back or with a small sloping back without armrests, on which it was convenient to sit in voluminous ball gowns. A lot of time has passed since then, but banquettes have somehow taken root in modern apartments, however, they moved from the front living rooms to the corridors and hallways, where they found important application. Now banquettes are used for comfortable putting on shoes, and if they are equipped with useful shelves at the bottom, then for storing under them all the shoes needed at the moment.

Making a banquette of this configuration will be a more difficult task than simply filling hallway shoe shelves own production. After all, it needs to be roomy inside, and to sit on top of it comfortably and spaciously. You can look at the models shown in the photo and evaluate your strength, whether you can repeat this yourself.

Also, please note what you can do extra bed for storage directly under the banquette seat, accessible by simply opening the lid. Inside you can store slippers, children's shoes and other small items.

Making a shoe rack with your own hands

If the size of the apartment in general, and the hallway in particular, is large enough, then you can make a larger, more spacious one. So, many people have a small storage room in the immediate vicinity of the front door, which is used as a warehouse for unnecessary things. You can make one, inside which you can place not only seasonal ones, but also all the pairs of shoes that you have in your wardrobe.

You can find many drawings of such complex shelves. They, usually, like large-scale wardrobes for clothes, have different zones storage, ideal for one or another type of thing. For example, you can make tall shelves for boots, slanted shelves for high heels, hooks for slippers or drawers for moccasins and sports sneakers.

DIY shoe rack

It’s worth mentioning separately about the special DIY shoe rack, which can be placed not only at the general exit, but also near the children's room. For kids, a properly organized shoe storage area can be an excellent educational moment; they will definitely want to return their shoes, which will be placed so beautifully and cheerfully. And mothers will have to spend much less time looking for this or that pair immediately before going out.

In the photo you can see several interesting options organizer for children's things. The first model is made on the basis of a wooden pallet. This material is at home and country crafts has not lost its leadership position for several years in a row. As you can see, several pairs fit perfectly between the boards, and for the other part you can come up with several hanging shelves or boxes. The main thing is to clean the surface well and treat it so that no splinters remain and the child does not get hurt, but it is equally important to decorate the pallets soft toys, drawings and applications, you can even mark out places, like in a car parking lot, where you need to attach what type of shoes. Turn shoeing into fun game A funny shoe rack in the shape of a hedgehog, on whose spines boots and sandals are hung, will also help.

You can select the model by different criteria: by the simplicity and ability to make a cabinet or rack with your own hands, by the beauty of the finish and the high cost of the material, knowing that it will be a wonderful setting for the jewelry of your shoe collection, or by ease of use. Whatever you choose, it will probably be better than unloading shoes on the floor in the hallway or in the vestibule behind the front door.

How to do DIY shoe cabinet? In this article we will look at the manufacturing stages.

Slush spring and autumn, dusty summer, winter, which places special demands on clothing - and now several pairs of shoes do not have enough space in the corner of the corridor.

Why is it more practical to do it yourself?

It is always easier for a non-professional to buy a shoe cabinet rather than make one. However, there are a number of nuances:

1. Firstly, the range of inexpensive shelves is often meager.
2. Secondly, the sizes of shelves in stores do not correspond to rational calculations. The foot of the average CIS resident is still much larger than the Chinese, who supply the majority, assume inexpensive furniture.
3. In addition, the height of the shelves is almost always the same. This is not entirely logical, since in winter people wear boots with high tops.

It's better to have one shelf with greater height or hooks on the sides of the shelf to adjust the height yourself depending on the season.

What to consider when choosing materials and components

Is it difficult to make a standard shoe cabinet? The obvious answer is no, it's not difficult. It is necessary to take into account a number of nuances before completing the drawings, purchasing materials and starting assembly.

Let's look at the most important details Your future shoe cabinet:

Note: buy one standard sheet Chipboard and sawing it ultimately turns out to be more expensive than ordering from a furniture store/manufacturer exactly the number of parts and the dimensions that you envisage in the drawings.

• The shelves do not have to be made of wood. Take a closer look at the type of shelves on the dish drainer. Lattice metal shelves - that's what they are best option;
• Chipboard is a material that combines low cost and functionality. Laminated sheets are sold in many furniture stores and small industries;
• back wall The cabinet can be made of hardboard - pressed cardboard, which is often used in furniture production.

Designer's notes

To make the design of the cabinet practical, you need to take into account the features of storing shoes and correctly calculate the dimensions of the shelves:

• the bottom of the cabinet should not be covered with anything, otherwise water will collect inside;
• shoes need ventilation. This may include several holes in the sides if the cabinet is planned to be closed (with doors);
• The depth of the shelves should correspond to the length of the box of the largest pair of shoes in the house.

How to calculate cabinet dimensions

Sketch of a shoe cabinet

Provided that the largest pair of shoes in the house is size 42, i.e. 27 cm long, the shelf should have “depth” with a margin - say, 28 cm.

Depending on the size of the shoe, the size needs to be varied. Big side shelves depend on the number of pairs of shoes you need to put:

• collect all the shoes that you plan to put in the locker and measure how much space they take up in a row;
• take into account the designed number of shelves (3 or 4);
• put a small margin in the width of the shelf.

Chipboard thickness - 16 mm. Accordingly, the external width of the cabinet will be 32 mm greater than the width of the shelf.

What you will need

It is worth noting that the sizes below are calculated based on the fact that the maximum shoe size is 42.

External dimensions of the cabinet: height - 1,200 mm, length (depth) - 320 mm, and width - 900 mm. You need to choose sizes so that they are close to the dimensions of standard parts that are available in every furniture store.

In this case, the set of necessary parts is as follows:

• 4 lattice or chipboard (to your taste) shelves with a width of 864 mm and a “depth” of 280 mm;
• top cover standard size 900 by 320 mm;
• side walls with a height of 1184 (taking into account the thickness of the top cover, the height of the cabinet will be 16 mm) and a length (“depth”) of 320 mm;
  frames (small parts made of chipboard) 100 mm high and 868 mm wide for fastening the structure at the back and front, called drawers;

Helpful advice: You can stretch a rope over the last shelf to use small clothespins to secure the tops of your boots: this way they will not break.

• figured facades (improvised doors) made of MDF with a height of 1195 mm and a width of 447 mm (2 doors plus a margin of 4 mm for ease of opening);
• fiberboard sheet with a height of 1195 mm and a width of 895 mm for the manufacture of the back wall;
• 4 furniture hinges;
• 2 door handles;
• 8 confirmations (5 by 70 mm). Confirmat - a special furniture screw for fastening cabinet elements;
• self-tapping screws 16 by 4 mm - it’s better to take a few dozen in reserve;
• Adjustable shelf holders: 4 per shelf.

Connection technology

The shoe cabinet is assembled in next order:

1. The holes in the side walls for inserting confirmations must be made with a diameter of about 8 mm, and at the ends of the drawer frames - with a diameter of 5 mm. The drilling depth is half the length of the furniture screw.
2. Metal corners will add rigidity to the cabinet. They will also be needed if you are attaching the finished structure to the wall.
3. Hinges for facades, corners, and the back wall must be secured with self-tapping screws.
4. Attach shelf holders, handles for fronts and hang shelves.
5. You can place the cabinet on the floor so you can sit on it when you put on your shoes, but it would be better to hang it and find another use for the countertop.

Helpful advice: if everything is in order with the ventilation, then the cabinet will be dry enough and you can also hide the Internet connection in it. Then there will be a Wi-Fi router on top of the tabletop.