As a main or auxiliary heater for a garage, private home, cottage or industrial premises. But how to choose the right heating device, and what characteristics should you pay attention to, in the context of the richest assortment presented on the modern market? domestic market?
To decide which electric gun better, initially you need to make a choice between several parameters:
It should be mentioned that depending on how much electric heat costs
Its quality, durability and reliability depend on the type heating element and the presence of automation, because it is a well-known fact that good technique can't be too cheap.
To help our compatriots when choosing a product that is of sufficient quality and not the best, our company’s specialists have compiled a rating of the main models presented on the domestic market.
Manufacturer Ballu with model BKx 3
The ballu bkx 3 heat gun is essentially a fan heater installed in a fairly compact metal case with polymer coating. The main purpose of the device is to heat residential, public and domestic premises. To heat the air flow supplied by the axial fan, the device is equipped with a highly efficient ceramic heater.
- The device is powered from a single-phase household power supply. With comparatively small sizes, ballu bkx 3 has a good performance of 120 m 3 / h. With a power of 2 kW, this fan heater is capable of heating a room with a not very large area of 25 m2 up to 50C °.
- The device is equipped automatic protection from overheating, manual step power regulator operating in three modes: half power, full power, without heating in fan mode. The ballu bkx 3 heat gun is reliable and does not require periodic maintenance.
- A plastic handle is installed on the body for transporting the fan heater. Device weight 1.7 kg.
- The cost of this device in different stores across the country varies from 40 to 55 USD.
Resanta TEP-3000K if you need mobility
The portable heat gun Resanta TEP-3000K is designed for rapid heating of air in residential and technical premises. This device consists of a supporting housing, a protective grille, a fan located in the rear part of the housing, and tubular heating elements made of stainless metal. Depending on the version, the control unit of this device is mounted in the upper part of the housing or on its side panel.
- Full power of this heating device is 3 kW, and the productivity is 300 m 3 / h, which is enough to heat rooms up to 30 m 2.
- The device is powered from single-phase network 200V 50Hz. With the help three-position regulator, you can set the desired heating temperature of the heating elements, which is: 1 position– without heating, in position 2 – 1500W, in position 3 position- at full capacity. In addition, an additional regulator allows you to smoothly set the desired heating temperature. air flow.
- The Resanta TEP-3000K heat gun is equipped with built-in thermal protection and automatically turns off the device when it overheats. On the body of the device there is a convenient handle for carrying this device.
- The mass of the heat gun is 5.1 kg.
- The cost of this device is retail stores Russia varies from 70 to 90 USD.
Silent gun Neoclima kh 2
The neoclima kx 2 heat gun allows you to create a local flow of heated air in small domestic and residential premises, as well as in places where repair and construction work is carried out. This one has a highly efficient ceramic heater RTS and a system that prevents the decrease in air humidity levels PlusO2.
- The device is powered from a single-phase household power supply, voltage 220V. The power of the device is 2 kW, which is enough to heat the air in a room whose area is no more than 20 m2. The productivity of the device, declared by the manufacturer, is 190 m 3 / h. Also, this portable climate control equipment is equipped with a thermostat that maintains the set temperature in the heated room. In addition, this device is equipped with a mechanical three-mode power regulator: 1 – 1 kW, 2 – operation at full power, 3 without heating in fan mode.
- The specially developed design of the axial fan allows it to operate without making any noise, which is a definite advantage of this device. The installed thermal protection will automatically turn off the power to this heater if it overheats.
- What makes neoclima kh 2 reliable and fireproof is its compact metal anti-vandal body with a polymer composition applied to it.
- There is a handle on the body for convenient transportation of this device, which weighs 2.36 kg.
- The price of the device in some stores varies from 47.5 USD. e up to 65 USD e
Equation 3000 VT - safety comes first
Equation ceramic heat gun 3000 W is an excellent example of a fan heater from the Middle Kingdom. Quite inexpensive, powerful and quality device, is not much different from similar models from other manufacturers. The only difference between it and other fan heaters is that it is equipped with a high-quality 3 kW ceramic heater. This power is enough to heat a home, office or garage with an area of up to 25 m2.
- This unit is equipped with a mechanical switch operating modes, which it has three: 1 – fan; 2 – heating with a power of 1.5 kW; 3 – work at full power.
- In addition, this heat gun is equipped with sensor against possible overheating,which will independently disconnect the power supply to the device from the 220V household power supply. The equitation 3000 also has a safety sensor that, when the device is turned over, will stop supplying power to the heating element. Such features only add to the advantages of this fan heater.
- The equation 3000 ceramic heat gun is made in a cylindrical metal case, with a fairly stable stand.
- The small dimensions and weight of the device (2.9 kg) make it possible to easily transport the device.
- The price of equation 3000 averages about 2 – 2.5 thousand rubles.
Fubag SIROCCO 20 M: made in Germany!
Electric heat gun fubag SIROCCO 20 M is new model fan heater, from the famous German manufacturer presented on the domestic market climate control technology. This representative of climate control equipment operates from a household electrical network with a voltage of 220 V. Thanks to cylindrical shape housing, this device has significantly increased productivity, which is 279 m 3 / h. The total power of the device is 2 kW.
- The fubag SIROCCO 20 M gun has a stepped three-position power level switch, air flow heating: 1 – fan; 2 – 1 kW; 2 – total power 2 kW. A tubular heating element is installed as a heating element in this device, which is protected metal grille from getting foreign objects into it.
- An important feature of this fan heater model is the presence of a built-in thermostat, the ability to change the angle of air flow, and the stable stand ensures maximum reliability of the device installation. In addition, this device has an overheat protection function.
- The fubag SIROCCO 20 M heat gun is a reliable device that can quickly heat residential, technical and production premises, area up to 20 m2.
- Comfortable handle and enough light weight 4.2 kg device allows you to transport it freely.
- The cost of fubag SIROCCO 20 M in some Russian stores is 3,650 rubles. – 4,200 rub.
And finally
The heat guns presented in the review differ little from each other in terms of technical characteristics. All of them are of high quality and have a standard set of functions. But the most modern and reliable, in a word, the best heat guns are equipped with a ceramic heating element.
On the market heating equipment leading positions are occupied by heat guns, which are used for heating residential and industrial storage facilities, garages, greenhouses, offices, sales areas, country houses etc. The air heater with a built-in fan quickly pumps warm air, which creates a comfortable microclimate even in severe frosts.
- Multi-fuel, including liquid fuel. The device is ideal for car services: the owner saves on heating the room by using drained motor oil. Such units operate for more than ten hours without a break.
- Gas heat guns. They are autonomous and stationary. Such equipment is widely used in the agricultural industry. Gas burner, located inside the device, contributes to uniform distribution heat. Device running on natural gas, does not consume large number electricity, which allows for significant savings.
- Electric heat guns are widely used both in everyday life and in production. Modern models equipped with a spiral or tubular electric heater. The last one is different long term services. All similar devices equipped with an electric fan heater and a thermostat that maintains constant temperature and preventing overheating.
- Infrared heat guns. They do not have a fan. The radiated heat increases the temperature of surrounding objects. The air warms up due to heat transfer. Such devices are used during repair work for uniform drying of walls and ceilings.
- Diesel heat guns. They quickly heat the room and are used during construction work in winter period. There are direct and indirect heating models. The power of diesel heat guns is greater than that of multi-fuel units.
IMPORTANT! Electric heat guns with a power exceeding five kilowatts should be connected to a three-phase power supply system.
Which heat gun to choose to solve a specific problem
A wide range of heating units makes it difficult to choose for a specific task. Which heating device models are best suited for an apartment, and which device is better to buy for a garage?
For heating a living space
When choosing a heating device for a house or apartment, it is necessary to take into account the area of the room, properties building materials, from which the walls are built (wood, brick), as well as the presence of thermal insulation. The best option- This is an electric heat gun.
For living rooms you should purchase indirect heating guns. In such devices, the burner flame is isolated and combustion products are discharged through exhaust system. Indirect heating guns are safe for humans and pets.
ATTENTION! In a private home, a heat gun is simply irreplaceable, because with it you can not only warm up, but also dry basements and cellars, get rid of mold.
For heating a warehouse
Use electrical appliances for heating hangars and warehouses is irrational due to high energy costs. When choosing a device, you should start from weather conditions region. Suitable for mild climates gas guns, For climatic zones With harsh winters ideal option will be a direct heating device running on diesel.
Greenhouse gun
When creating greenhouse conditions for growing garden crops, summer residents give preference gas units heating Diesel or electric appliances are sometimes used. The main requirements for installing the device are: heat gun should be suspended from the roof of the greenhouse so that the forced warm air does not burn the leaves of the plants.
IMPORTANT! Thanks to the mesh heater of the gun rectangular shape do not dry out the air in the room.
General criteria for choosing the right heat gun
What parameters should you definitely pay attention to:
- Determination of power. It takes one hundred watts to heat 1 m². It turns out that for a room with an area of 100 m² you will need a heating device with a power of at least 10 kilowatts. For a more accurate calculation of power, the height of the ceilings and the number of windows and doors are taken into account.
- Presence of combustion products. Direct heating devices are suitable for open construction sites. They are installed for rooms with a good ventilation system.
- Autonomous heat guns work less than stationary ones. Stationary devices are characterized by high performance. Despite their impressive size, they are considered more economical than miniature heating devices.
- Safety. The device housing must be resistant to mechanical damage. Sensors that are triggered when the device overheats are designed to prevent damage and fire. To increase the level of safety, manufacturers produce models that automatically turn off in the event of a rollover.
- Quiet operation. A humming device operating for several hours in a row negatively affects a person’s well-being. The noise level produced must be within reasonable limits. Units that produce a noise level of less than 40 decibels during operation do not create additional stress on the hearing aid.
- No suspicious odors. Some heating devices, the design of which is dominated by plastic parts, exude unpleasant chemical smell. Ceramic heaters are considered the safest.
- Easy installation and ease of use. For temporary heating of a house or apartment, it is better to choose models that do not require a chimney or ventilation system. They just need to be connected to the power supply system.
- Compactness. Rectangular and cylindrical heating units occupy less space than models running on diesel or gas. Another advantage of electrical appliances is their mobility.
Quickly heat a spacious room with heating radiators or other convector heaters impossible. The heat from the appliances spreads too slowly through the heated room due to natural convection, so an electric heat gun with forced circulation air.
The powerful fan heater is capable of as soon as possible heat almost any size room.
A floor fan heater (also known as a “heat gun”) is a household or industrial heating device, which in addition to the heating element has a built-in fan. The first heats the air inside the housing, and the second pushes it into the heated room.
Moreover, the circulation process occurs continuously and with high speed. This is the reason for the high heating efficiency large areas this type thermal equipment. When operating through a fan heater with a power of only 2–3 kW, about 200–300 cubic meters of air mass passes per hour.
Without a continuously running fan, a heat gun would be of little use; it is only thanks to it that the heater in question is so efficient and productive
Using a heat gun to heat:
- construction sites;
- garages and workshops;
- premises for agricultural and industrial purposes;
- living rooms;
- greenhouses;
- warehouses.
It is also often used for heating or drying various surfaces(clothes suspended ceilings, plastered walls, etc.). The electric fan heater does not emit exhaust gases or toxins during operation. From an environmental point of view, this equipment is completely safe and harmless.
An electric heat gun should not be confused with its gas or diesel counterparts. It is difficult to call them environmentally friendly. With heated air, at least it comes out of them carbon dioxide, large quantities of which are hazardous to health. Electric heaters They are freed from this; by definition, nothing is burned in them to produce thermal energy.
An electric heat gun should not be confused with a gas, diesel or infrared one - in the first two cases a different energy source is used, and in the second the principle of heat transfer has been changed
An infrared heat gun is similar to a fan heater in design and appearance. However, there is no fan as such. The transfer of thermal energy here occurs not due to forced air exchange, but through infrared radiation. That is, heat in this case is transferred directly to heated surfaces and objects using IR rays, and not through preheating the air.
Advantages and disadvantages of the unit
Among the many advantages of a heat gun operating solely on electricity are the following:
- Possibility of installation in unventilated rooms.
- Long period of continuous operation.
- No open fire.
- Availability of automatic control with thermostat.
- Receiving heat immediately after connecting to the power grid.
- There is no need to constantly add combustible fuel.
- Possibility of using the gun as a regular fan.
- High efficiency when heating large rooms.
- Small dimensions.
- Versatility in terms of placement.
The fan heater does not emit unpleasant or harmful substances. There is simply nothing to burn in it. Occasionally, when operating this appliance, a burning smell appears for a short time after power is turned on. This is due to buildup on the heating element and protective grille dust. If the gun is kept clean, then this will not happen.
You can even heat your home with a fan heater (there are no gas emissions from its operation), problems may arise only with drying the air
The electric heat gun is able to work unattended and continuously for several days. It does not require adding fuel. At the same time, the presence of automation guarantees that the temperature in the room will be maintained at the required parameters without human intervention.
Warming up the spiral, which heats the air in the heat gun, after feeding electric current happens in a matter of seconds. Heat almost immediately begins to flow into the heated room. In this regard, the equipment under consideration greatly outperforms other heater options.
Fan heaters are extremely easy to use. It is only necessary to prevent dust from accumulating inside, which will emit smoke when the coil is turned on. They can be placed on the floor, wall and even on the table. Model range This thermal equipment is extensive. You can find an option for any placement and any size.
The fan heater has only three disadvantages:
- “Burning” oxygen and “drying” air.
- High noise level when the fan is turned on to maximum.
- Attachment in the electrical network.
When an electric heat gun operates, the air around the heated coil is naturally dried. As a result, the overall humidity in the room gradually drops, and it is impossible to escape. A similar situation arises with oxygen: it gradually burns out due to the contact of air masses with a hot heating element.
Of course, these are not the same volumes as when operating a gas or diesel gun. But if at the moment is critical, then the fan heater should be chosen not with a spiral, but with ceramic plates. The latter are heated to lower temperatures, which greatly eliminates the disadvantages of open spiral heaters. But such models also cost a little more.
How to choose an electric heater gun
Before you go buy a fan heater, you need to clearly understand why you need a heater at all. If air heating is required occasionally and quickly, then an electric heat gun is ideal for such modes. But if the temperature in the room needs to be maintained for a long time and at a constant level, then it is better to look for another option, otherwise the electricity bills will be simply huge.
Using a working electric heat gun, the desired temperature regime you can save enough long time, but much more often the device is used for quick and short-term heating
It is also necessary to decide in advance required power(depending on the cubic capacity of the room) and power supply. Powerful industrial and semi-industrial models require three phase voltage. If the room has only a regular single-phase socket, then the electrical equipment should be selected accordingly.
Criterion #1: heating element
The main thing in an electric heat gun is the fan. But it is standard in all models. It's hard to come up with anything unique here. But it’s worth understanding the heating element in more detail. From him the right choice Both safety and, in many respects, the power of the heating device depend.
There are two types of air heating elements in the fan heater:
- spirals made of high-resistance alloys;
- ceramic plates.
The first option heats up to 300–600 0 C, and the second only to 150 0 C. However, due to the smaller area of the heating element, the spirals are somewhat inferior to the plates in terms of efficiency. The heat transfer surface in the first case is significantly smaller than in the second. And the fan “removes” heat from the entire heated area.
If an electric fan heater is needed for constant and long work, then it’s better to take a closer look at models with ceramic heating plates
The ceramic option is more fireproof, since the temperature of the elements in such a heat gun does not rise too high. And in terms of power output and heating efficiency, models with plates are in no way inferior to their counterparts with a spiral. Moreover, the spiral burns out much more often.
If you disassemble the ceramic plate, then inside it will be the same heating coil. Only it is made of a different alloy and heats up to a lower temperature. At the same time, all the heat it creates is transferred to the ceramics, with which thermal energy is already removed by the air flow from the fan. The plate takes a little longer to heat up than an open spiral, but it will also last longer.
Criterion #2: Hull design
All powerful fan heaters are now available in metal versions with anti-corrosion coating. A plastic body is not acceptable here. In low-power household appliances There may be plastic inserts on the casing, but most often these are rubberized handles and switches that you have to touch with your hands.
The shape of the fan heater body usually looks like an elongated cylinder (like a cannon), but there are also “rectangular” models
All thermal electric guns are divided into:
- stationary;
- mobile (portable).
Stationary models are cheaper and have more power. Portable options are more compact and can be easily turned into in the right direction. They usually have hinges that allow you to adjust the direction of the airflow by rotating the entire gun where you want it to go. However, on sale you can also find an option with rotary dampers that deflect the air stream from the fan to the right/left and up/down.
If the heat gun has a protective dissipative mesh, then it is mandatory must be metal. Here any plastic is categorically unacceptable, since the temperature of the air leaving the fan heater is too high.
Criterion #3: Power
The more power a device has in kilowatts, the faster and larger the room it can heat. But as the power indicators increase, the fan noise also increases. It has to operate at higher speeds, which inevitably leads to an increase in noise in decibels.
According to a simplified scheme, the power of the fan heater is selected at the rate of 1 kW per 10 sq. m. area. But this formula is valid only if the ceiling height does not exceed three meters. According to this, a heat gun can be selected for a garage, cottage or small workshop. For large buildings it is necessary to make more detailed calculations taking into account not the square footage of the area, but the cubic volume of the room.
An accurate calculation of power should be made using a formula that takes into account the volume of the room in cubic meters and the thermal conductivity of the walls, as well as the difference between indoor and outdoor temperatures
In addition to the power (kW), the technical data sheet of a heat gun with a fan also indicates the heat flow or productivity in cubic meters/hour. In most cases, 1 kW accounts for about 100–120 m 3 / h. But some devices have more efficient fans that can pump a larger volume of air. When choosing a model, both of these indicators must be taken into account.
For a cottage or garage it is worth choosing household option with power up to 3 kW. For small spaces this is more than enough. Remember, everything above 5 kW requires a three-phase network.
Criterion #4: additional features
When choosing a heat gun, you should also pay attention to the presence of various additional features, which may include:
- Splash-proof housing – for fan heaters installed in rooms with high humidity.
- Built-in air humidifiers and filters.
- Thermostat for stepwise adjustment of power output.
- Automatic “overheating protection”.
- “Self-shutdown” function when the heating device is tipped over.
Also, some models have a full-fledged block automatic control, which independently maintains the room temperature within the specified parameters. If it is available, the heat gun can be left to work completely unattended: the automation itself will turn the fan heater on/off as needed.
Which manufacturer should you prefer?
In domestic stores heating equipment Electric guns are found both imported and manufactured in Russia. In general, there is not much difference between them. Here you need to focus more on the power of the device. But among the manufacturers there are also recognized leaders, for whose branded fan heaters you will have to overpay a little.
If you need a powerful and durable electric gun for heating, then special attention worth paying attention to models under trademarks Ballu (Netherlands) and Master (USA)
Fan heaters are produced by a fairly large number of domestic and foreign companies, but among the main ones we can highlight:
- Ballu (Dutch brand, but production is established in Russia).
- Master (USA).
- Timberk (Sweden).
- Inforce (Russia).
- Fubag (Germany).
- Quattro (Italy).
- Tropic (Russia).
- Resanta (Latvia).
Almost all manufacturers offer heat guns in a wide range of heating power and air flow. In the existing range of this equipment there is always a model for specific needs, you just need to correctly assess the needs.
Taking an electric gun that is too powerful and then turning it off every few minutes to avoid getting burned is not very smart and costly.
Conclusions and useful video on the topic
To make it easier to understand the features of the device different models electric heat guns, we have made a small selection of videos with reviews and descriptions.
Design of an electric fan heater with a ceramic heater:
Which heater is better - ceramic or spiral:
How to choose a fan heater:
An example of calculating the power of a heat gun:
The fan heater allows you to almost instantly heat the air in the room to comfortable temperature. But we must be aware that electric heat guns with a spiral or ceramic plates are intended more for short-term heating. If you need a heater for constant use, then it is better to take a convector or an oil radiator.
The choice of heat guns can be carried out both for living conditions: heating a house, garage, greenhouse, and for construction needs (when it is necessary to dry the room after finishing). In any case, to choose the right this type electric heater, you need to determine its power, manufacturer and design features. Next, we will tell readers of “” how to choose an electric heat gun and what parameters you need to pay attention to when purchasing.
Specifications
The first thing you should start from is what parameters are suitable for normal operation electric heat gun. The choice should be made based on power and suitable voltage.
As for the first characteristic, there are two calculation options. More simple technique The definition is that for heating 10 sq.m. The premises require at least 1 kW of power. In total, if you have a room of 4*6 meters (for example, a garage), simple calculations will show that you need to choose the power of an electric heat gun, no less than 3 kW. We determined this as follows: 4 * 6 will be 24 sq.m., taking into account the recommendations that the power reserve should be at least 20%, we have: 2.4 * 1.2 = 2.88 kilowatts. The closest value is 3 kW, which is what you need to select for heating the garage.
The second calculation method is more accurate, and we recommend using it when choosing an electric heat gun for your home. In this case, the formula takes into account not the area of the room, but its volume and the thermal conductivity of the walls. As a result, the formula looks like:
P= (V*dT*Kt)/860 ,
- V is the volume of the room, calculated as the area multiplied by the ceiling height, m3;
- dT - temperature difference environment and indoors;
- Kt – thermal conductivity coefficient. For walls with high-quality thermal insulation from 0.6 to 1. Average thermal insulation or bricklaying in two rows - from 1 to 2. Single-row bricklaying, poor thermal insulation - from 2 to 3. Dilapidated hangars made of corrugated sheets or boards - a coefficient of 3 to 3 is accepted 4$
- 860 - the number of kcal in 1 kW.
Power marking - 9 kW
So that you understand the essence of the calculation, let us again consider it with an example. You have decided to choose an electric heat gun for the garage, or rather, for heating the car. The volume of the room is the same 4 * 6 meters * 3 (ceiling height). The temperature inside the building should be +15 o C, outside it is now -20 o C. In total, the difference is 35 degrees. The garage is well insulated, so we accept the coefficient as 1. As a result calculation formula will look like: 72*35*1=2520 kcal/hour. To convert the value to kW, you need to divide it by 860. Result – 2520/860=2.93 kW. Taking into account the reserve, it is necessary to select a heat gun of at least 3.5 kW, which will be quite enough.
We immediately draw your attention to the fact that there is conditional classification devices by power. It is believed that up to 5 kW these are fan heaters, and above that – guns. We reviewed reviews of the most popular models in the corresponding article!
Second, no less important technical characteristics is the operating voltage. There are electric heaters with a power of over 20 kW, the operation of which, of course, requires three-phase network at 380 V. You should also take this point into account if you decide to choose an electric heat gun for heating your garage or cottage over a new, more powerful one. Devices with a power of up to 7 kW can be connected to a single-phase 220 V network if the wire cross-section allows it. It is best to check before connecting to make sure that your wiring can handle such current loads.
Well, the last thing you need to pay attention to when choosing a heat gun is the operating time. As you understand, when heating a room with a cannon, it must work without interruption for a long time. That is why device manufacturers indicate on the case the value “24/1” or “24/2”, which respectively means round-the-clock operation with a break of 1-2 hours.
In addition, in order to choose the right electric heat gun according to its characteristics, pay attention to the noise level of its operation and the range of operating temperatures. Modern devices must operate at temperatures no less than from +5 o C to +40 o C.
Video review of heaters for home and construction sites
Room type
Next one, no less important criterion choosing an electric heat gun - depending on the type of room. For example, for a home you need to buy indirect heating devices, the design of which includes a waste gas removal system. This is due to the fact that in a private home there are people and animals who can be negatively affected by exhaust gases. Although this point is not relevant in relation to an electric heater, you should still know about the importance of indirect heating. If you want to choose a heat gun for a greenhouse or heating a car, it is better not to overpay and buy a simpler design option.
One more thing should be noted here important nuance– if you want to choose an electric heat gun for temporary heating, buy a portable case. If the heater needs to work for a long time in one place, for example, in the country - choose a stationary type device that needs to be fixed in a certain place in the room.
Additional options
We have figured out which electric heat gun is best to choose based on power and depending on the type of room. But that's not all you need to know about this issue. When choosing a heater, it is very important to pay attention to the following points.
Heat guns are mobile fan heaters that can be used to heat rooms. This equipment can be freely moved between rooms for various purposes.
A heat gun can be used in two different situations. It can be either the only or an additional source of heat generation:
- in the first case, during winter, a household electric heat gun for the home is an excellent heater for the garage! And not only. On construction work when quick intensive drying of the finish is needed, heat guns play an important role;
- in the second case, there is work in winter in shops, offices, and shopping pavilions. Also, a large workshop or hangar can be equipped with electric heat guns; many supermarkets use these directional thermal fans for heating.
Prices for heat guns vary, as there is a device for a car room, and there is one for an airport that warms up the runway.
For car owners, heat guns will do an excellent job (for example, Timberk TIH R2 5K). IN severe frosts Not every car starts the first time. Therefore, the device for car rooms performs the main service in warming up a frozen car. In just 10 minutes, a hot stream from a heat gun directed at the hood puts the car in a combat-ready state. Particularly popular are guns with a timer and thermostat, which do not require constant monitoring of the operation of the unit.
There is another option. Often among men there are amateurs - car mechanics. Such men do not leave their metalworking machines in technical rooms even in severe frost. A garage heater is fully suitable for amateur mechanics, as it will not only warm the air in the garage/outbuilding/shed to an acceptable temperature. At the same time, such an electric heat gun will be able to raise the temperature of surrounding objects, which means that metals will not burn your hands with cold. A stationary water heat gun is also perfect for this option.
In other words, an electric air heat gun for technical premises will be the best winter purchase for any man if:
- you have an unheated room for a car, and if there is enough low temperatures your car won't start;
- do you have unheated non-residential premises, in which turning and metalworking (or other) equipment is installed, and you need to work at low temperatures.
Other types of heat guns
Industrial guns can also be liquid fuel. This diesel gun, gasoline or thermal gun on diesel fuel. Diesel is characterized by its low cost and lowest consumption, which makes units running on diesel fuel the most profitable for users. Gas air gun received wide application for installing suspended ceilings, as evidenced by numerous reviews from craftsmen.