Dismantling various door hardware has its own characteristics. For example, a regular, stationary handle can be removed without any difficulty. However, many are interested how to remove the handle latch. Because it has certain structural features. In particular, on the outside, a key is used to lock and unlock it, and on the back door leaf- rotary handle.
Before how to remove the handle latch, prepare certain tools. They are available in every home - a screwdriver and a special mounting key, which is sold complete with a handle. Although in some cases you can do without it. It all depends on the characteristics of the fastening.
A few minutes for complete dismantling
It will only take a few minutes to remove the handle latch, even if you are an inexperienced craftsman or even if you are starting this procedure for the first time.
On one side of the handle there is a special stopper that ensures reliable fixation of the product on the door leaf. Press down on it with a thin screwdriver or other hard, thin object. While holding the stopper, pull the handles. This will allow you to remove it. Remove the two screws securing the handle. This will allow you to dismantle the fittings from both one and the other side of the door leaf.
The next stage of the process, how to remove the handle latch- this is removing the strip from the end of the door, which is also secured with two screws. Unscrew them and pry the bar with a screwdriver. Perform the last step carefully so as not to damage the coating on the door. Pull out the cover, together with which you can remove the internal mechanism of the fittings. That's it, now you know how to remove the handle latch. There is nothing complicated about this and it does not require much time.
Installing a handle on a door is not difficult. You will have to do this anyway. Shouldn’t we leave the door leaf with holes for handles, but without fittings? All pens of this type similar. In addition, given the special structure of the handles, only the exact same model can be installed in their place.
The re-installation process involves the reverse sequence of actions. First you need to insert the internal handle mechanism into the door leaf, and then screw the bar. Make sure that the beveled part of the latch is turned towards closing the door leaf. Install the decorative trims, then put on the handles. Check their operation and secure with screws. This completes the installation process. Now you know not only how to remove the handle latch, but also how to install it back on the door leaf. The whole process will take from ten to twenty minutes, and only if you have really never done anything like this.
We wish you good luck in your work!
|
In the product catalog there is a price for latch handles.. |
The latch lock is considered the best option latches suitable for interior doors. Thanks to this mechanism, you can lock the door from inside the room, and people outside the room will no longer be able to open the door. The latch lock can be produced as a separate mechanism, or as an additional component of the door handle.
Since the mechanism is used quite often, the latches sometimes cease to perform their functions. At the same time, it is not always advisable to repair them, and sometimes it is impossible at all. After all, it is much easier in terms of money and time to replace the entire door mechanism rather than removing the latch separately interior door, especially if it is a component of a door handle. In this article, we will look in more detail at how to dismantle the old one yourself and then install a new latch lock.
Interior door latch repair
Whenever minor damage You can, in principle, do without dismantling. For example, if the lock is too tight, it is enough to lubricate the mechanism with oil and then turn it three to five times. Most likely, the latch will begin to function normally. If the steps described above do not bring the desired effect, you need to remove only the latch or the entire handle.
The easiest option is to remove the entire handle. To do this you will need to do the following:
- turn the handle so that the hole on it aligns with the latch, which is located inside;
- press the latch using a thin hole or an awl and pull the handle off the door;
- remove the cap;
- under the cap there will be special bolts, by removing which you will remove the latch itself from the door.
The last action is recommended to be performed only if the defects cannot be identified externally or they are so significant that there is no point in tinkering with the pen. Minor defects include: broken springs, chips in product parts, etc. The only solution that will help solve the problem is to replace the device element that has failed.
The easiest way to disassemble a door latch is to completely remove it from the door leaf. To dismantle, simply unscrew the screws on the end of the interior door and remove the lock. If the handle head prevents dismantling, it must also be removed.
The principle of installing a latch on a door
The door handle and latch assembly procedures are reversed from removal. You just need to repeat the entire process that you did during disassembly, but only in reverse order. Make sure that all the bolts are tightened well, otherwise the latch may jam and the handle may play.
All basic procedures are described. In the article, we discussed how to dismantle the latch lock of an interior door and then install it back. All that remains is to prepare necessary tools and get to work.
Round door handles, called knobs, have many advantages - they are easy to use, quite reliable in operation, and their cost is relatively low. Finally, these handles are unified - replacing them is simple: remove the knob, insert a new one and enjoy - the fit dimensions will be the same, even if the handle is made by another manufacturer.
Without a doubt, in most cases the actions do not look so categorical - it is not replacement that is required, but only routine maintenance, the lock or latch mechanism needs to be lubricated, or something needs to be corrected. But before performing these works, the handle must be removed. There is nothing complicated in this process, you just need to know what to do - our illustrated guide will make it easier to remove the round handle without damaging the doors and, as sometimes happens, your palms.
Removing the round handle
Round handles can have different designs and they are removed in different ways. One of the most simple options shown in the image. In fact, no explanation is required - we unscrew the two tightening screws, after which the handles with the entire mechanism can be removed. And having unscrewed the screws from end side doors, the latch can also be removed.
However, sometimes not everything is so obvious - there is round handles with a button and decorative elements that hide the mounting screws. To gain access to them, you need to remove the outer part of the handle that is fixed special button, and then a decorative overlay.
How to remove a round handle with a button
The buttons that secure the outer part of the handles may also differ in design - sometimes they are clearly visible, in other cases only a hole is visible. Our task is to find the locking button and press it. Let's go!
On the handle INSIDE doors we find the button or hole under which it is hidden. If the button is not visible under the hole, you should turn the knob different sides, achieving alignment of the hole with the button.
Having gained access, press the button with a handy object - a nail, a thin screwdriver, etc. Having pressed the button, we remove outer part handle, turning it a little from side to side and moving it away from the door (pulling it towards you).
Note. Sometimes it takes some effort to retract the button, especially if the handle is oxidized or clogged with compressed dust. When applying force, be careful - the tip of the screwdriver can easily come off the button and scratch the handle. The further path of the screwdriver is easy to trace - it will stick into the palm or finger of the other hand holding the handle.
The outer part of the handle was removed (its slight oxidation is noticeable in the photo), let's move on to the next step.
Now you need to remove decorative element in the form of a cover that hides the fixing screws of the round handle. To do this, pry it off with a thin metal object - a steel technical ruler, a screwdriver with a wide but thin blade, or a similar object. Prying should be done very carefully, trying not to scratch or damage the coating of the door leaf. It is advisable to place a thin metal plate under the prying object - a blade, for example, and only then remove the decorative trim. You can secure the plate to the door leaf with electrical tape or tape.
Note. Some types of overlays have special places for removal in the form of recesses into which the tip of a screwdriver is inserted. If the recesses are semicircular in shape, then it is advisable to pry off the cover with a round-shaped object - in extreme cases, a Phillips screwdriver. Typically, the removable places are located at the bottom of the decorative trim, and not on the side.
Having removed the decorative trim, all that remains is to unscrew the screws holding the lock ladles together. The handle has been removed.
As additional information, we note that the above method can be used to remove the vast majority of knobsets with both round and staple-shaped handles. The shapes of the buttons in the images are the most common, but they can look different.
Another button option.
And this form happens...
And this one too - in the form of a bracket...
It will be useful for any owner to know how to disassemble the handle on a door, especially an interior one. This fittings are subjected to serious testing by all residents, so someday it will fail and another one will need to be replaced. In this case, you do not need to call specialists; you can handle it yourself, while saving on employee wages. Moreover, this business does not require great skill, but only a little skill. The dismantling process may differ depending on the type of handle, but the entire process should not cause any particular difficulties.
How to remove the handle from an interior door? Before you begin to analyze the mechanism, you need to find out what type of classification it belongs to. The division occurs according to several criteria. The one described below is suitable specifically for analyzing the handle, because it has a classification according to design features.
Types of pens
Push. This handle is attached to both sides of the door leaf and has L-shape. Opening occurs due to the load on the handle, after which the tongue is set in motion. The disadvantage of this fittings is that it is very dangerous.
Rotary. The opening method is the same as that of a push button, only the tongue is driven not by pressing the handle, but by turning it. Such models are often not very convenient, because in order to scroll it, your hands need to be dry, otherwise they will slip. When replacing them, a reasonable question arises about how to unscrew the interior door handle.
Stationary. This handle does not have a latch. It is attached with self-tapping screws directly to the door leaf. It can be single- or double-sided, and has an axial connecting element.
Reasons for disassembling the pen
It is not so difficult to disassemble any of the door handle models, because they have a similar design.
At the same time, it is extremely rare to disassemble this hardware. What reasons can lead to this? How to remove the handle from an interior door?
The first reason is breakdown. It occurs most often. Inexpensive Chinese models, which are not designed for constant and rough loads, are often prone to breakdowns. If the prevention of certain elements is not observed, the fittings become unusable. It should be repaired, and sometimes the entire element should be replaced.
The next reason is the need for replacement. Every year the market is replenished with new and improved models. In this case, you can choose color scheme, suitable for the interior, or install a new, more functional and reliable model.
Indoor renovation often means a change in style. Door handles are also not ignored. Therefore, the question often arises of how to disassemble a door handle.
Another reason - spoiled appearance. If a part is made of low-quality material, then scuffs and scratches will very soon be visible on it, which negatively affects the entire interior.
Removing the push handle
How to remove a handle from an interior door push type? This mechanism is more difficult to disassemble, because in its design there is an axis rod, due to which the handle is held. It is tightened with a tetrahedron.
The process of disassembling the handle must begin by removing the plugs around it. They are fastened with self-tapping screws or pressed tightly. They are very easily removed using a minus screwdriver.
On one side of the door you need to unscrew the fittings and remove them. Then the second part is removed, on which the axle rod remains.
If the handle is with then it is also removed.
Following consistency and accuracy will allow you to remove the mechanism without problems, without damaging parts or creating unnecessary hassle.
How to remove the handle from a rotating interior door with a rosette?
When in fittings rotary type If there is no hole on the side into which you can insert a key or screwdriver, the elements must be separated manually. Both parts of the handle should be twisted in different directions and gradually removed from the thread. There will be an axial rod on one of them.
In a similar way, the socket is removed and the screws are unscrewed. When the axle is removed, you can work on the following elements - a latch or lock, if necessary. When decorative parts are removed, you need to monitor the use of your force, because if you overdo it, you can damage the elements.
Removing the rotary handle
The handle with a lock for swing-type interior doors is removed as follows.
To do this, you will need a key to tighten the spring mechanism. Often it is not included in the packaging with the product, but it can easily be replaced by a nail or other thin object.
The first step is to remove the decorative plates, which can simply be pryed off with a sharp object.
Use a key or a nail to move the spring-loaded pin, inserting the tool into the technological hole located on the side. At the same time, pull the handle and remove it along with the cap.
Then you need to remove the fastening screws located on the plate. Then the two parts of the handle can be removed along with the axle.
Reassembling the round door handles is not difficult, you just need to do all the steps in the reverse order. First comes which is fixed with a plate, then the axle is inserted, and fasteners are put on it. Decorative inserts are installed last. The main thing is not to forget that the decorative flange is threaded first, and only then the main part of the handle is attached.
Removing the stationary handle
How to disassemble a stationary door handle? They are less likely to break or become deformed. This is due to the lack of moving elements in it. Often door handles of this type are not repaired after removal, but replaced entirely. The removal process is as follows:
- Use a screwdriver to unscrew the screws.
- One part is unscrewed from the rod, and the second is removed along with it.
This design may not have a central rod; this greatly shortens the process. You only need to select the right screwdriver to unscrew screws of a certain diameter.
Remove the handle with the latch
First of all, when dismantling the latch handle for interior doors with an automatic lock, you need to remove the screws using a screwdriver. Next, unfasten the overlay elements. Use to unscrew the rod.
After this, pull out the rotating mechanism wrapped with a spring.
Popular method
There are several ways to remove the latch handle for round interior doors with a lock. Here is the most popular one.
You need to remove it with a screwdriver, first from the part where the locking device is located. You must press down on the opened stopper and at the same time pull the handle towards you.
Then the latch is pulled out, for which the screws are unscrewed, after which the latch is released.
Thus, disassembling any door handle with your own hands is not very difficult.
The reasons for removing locks vary. You can call a locksmith to remove the lock, but you will have to wait. When you don’t have time to wait or don’t have the funds to hire a technician, you need to know how to disassemble an interior door lock yourself. It's not difficult to do this. To do this, you need to know how to disassemble the most basic types of locks. If the lock begins to jam, it is necessary to find out the cause and eliminate it so that you can safely close and open the door. It is better to prevent a breakdown than to fix it later.
Locks are installed on entrance and interior doors. The most popular were in lately round handles with built-in locks. Their design has a halyard tongue, with the help of which the entire lock mechanism operates. Rotary knockers may have a built-in lock that locks the door. To parse round lock you will need a key. It comes with a lock included.
If the key is not at hand or is broken, you can use any thin object to clamp the spring mechanism.
Steps to disassemble the nob handle and remove the lock:
- Clamp the spring mechanism;
- Move the pin;
- Pull the handle;
- Remove the pen along with the cap;
- Remove the flange latch;
- Unscrew the fasteners on the plate;
- Completely remove the handle (its two parts).
You need to move the pin using a key, inserting it into the hole located on the side of the handle. This must be done carefully. The lock is removed along with the handle, since it is built into it. This type of lock is mortise. It is also called round, since the handle itself has a spherical shape.
Disassemble the lock front door it will be more difficult. He may also have round shape, but built into the door separately from the handle. This one is more complex than interior models. They are cut into the door leaf separately from the handles. Mortise locks can be a cylinder model. They work with the help of a larva, which is a fixator. You can remove the lock yourself. The cause of the breakdown may be the larva. You can replace the cylinder itself or change the entire lock.
How to disassemble an interior door lock: necessary tools
Many interior doors are equipped with handles that have built-in locks. Typically, such handles are installed on doors to a bathroom or toilet. Owners often save on fittings, so they install inexpensive ones. The locks in them can fail: the tongue gets stuck, the handle doesn’t work, the key gets stuck in the lock. You can solve these problems yourself. The lock must be accompanied by instructions for disassembling it. If there is no such instruction, then you need to figure out how to disassemble it and fix the damage yourself. You need to know the lock's structure in order to dismantle it.
To work you will need:
- Screwdriver;
- Pliers;
- Adjustable wrench;
- A sharp object (awl, needle, hairpin).
Initially, you need to remove the cover from the locking button. After this, you can remove the mechanism itself.
Almost everyone has the above tools in their home. You need to act carefully so as not to damage the decorative trims, the lock itself or the handle. The work should be done calmly and step by step.
Five ways to open a door: interior locks with handles
If the key is lost or broken, you have to open the lock yourself using improvised means. In any home there are objects that can be used to open door lock to have it repaired or replaced. Disassembling the lock is optional. Sometimes you just need to open it urgently to get into or out of a room.
You can open the lock using the following items:
- Sheet of paper;
- Plastic cards;
- Knitting needles;
- Screwdrivers;
- Sheela;
- Knife;
- Files.
You can open the lock quickly: you need to insert a card or a sheet of paper between the door and the jamb. Push the tongue. The mechanism will move and you can turn the handle.
After a careless emergency opening of the lock, it may need to be replaced. It will have to be removed from the door leaf and a new one installed.
Interior locks with a latch: causes of failure and analysis
The reason for the lock jamming or breaking may be: accumulation of dust in it, lack of lubrication, entry of a foreign object, or opening the mechanism with a key that is not the original one.
Exists mortise lock with latch. Jamming can occur due to the tongue being stuck. The assembly of such a lock includes a spring mechanism. If it breaks, the tongue cannot move due to the spring.
To open such a lock, you must do the following:
- Move the tongue and tilt it to the side;
- Press the handle;
- Push the tongue inside the lock;
- Pull the door towards you.
If the door slams with the latch turned, you need to insert a thin tool under the handle, turn it and remove it. After this action, the latch should snap into place.
How to remove a lock from an interior door (video)
When disassembling any lock model, it is worth considering its structure. It is necessary to follow the sequence of actions when disassembling the lock. It's easy to disassemble the mechanism, but it's still worth reassembling it correctly afterwards. By disassembling it slowly and carefully, after removal you can repair it and reinstall it. Sometimes the cost of a spare part for a lock is more expensive than the lock itself. In this case, it is easier to replace it completely and use it without any obstacles.