The bed determines the direction and style of the bedroom design. An ordinary boring bed makes the entire decoration dull. How can you radically and inexpensively update this piece of furniture? Three interesting techniques will help you create soft headboard for the bed with your own hands.
Upholstered headboard - a new design for your bedroom
The headboard of such a bed is completely covered with fabric, under which soft foam rubber is placed. For greater decorative purposes they are used various methods screed These beds are quite expensive, but good news The fact is that you don’t need to buy a new bed for this. You just need to make a new soft headboard - the video and master class will help you with this.
Even the simplest upholstered headboard looks great, and if there is an ottoman with the same finish next to it, new design The rooms are almost ready.
Master class No. 1 “upholstered headboard in a couple of hours”
This is one of the simple techniques for creating such bed decor, which is perfect for those who do not want to spend a lot of time fiddling around.
Materials and tools:
- plywood;
- foam;
- any fabric for the base;
- thick fabric for external upholstery;
- furniture stapler;
- electric jigsaw.
Since this method does not involve screeding, it is advisable to take fabric with a bright, beautiful print. Plain fabric can also look impressive, you just need to choose good color so that you can enjoy the soft headboard of your bed with your own hands for as long as possible.
Job description
Step-by-step description of how to make a soft headboard:
- We cut a sheet of plywood with a jigsaw according to the right sizes– it can be either a rectangle or any other shape. However, when covering, it is easier to work with a rectangular shape.
- 2 layers of foam rubber are applied to the plywood, then we cover it with fabric for the base - this can be any unnecessary cut. It should be secured with a stapler on the back side of the plywood sheet.
- Now let's move on to the final trim. beautiful fabric and you're done!
Very little time was spent, but the interior was radically transformed. I wonder if the headboard is the same color as the curtains - an amazing solution.
Master class No. 2 “headboard in the form of soft squares”
The good thing about the upholstery technique in the form of soft squares is that the headboard can be made even from fabric scraps and pieces of foam rubber. If other methods require solid cuts, then here you need to make a lot of small squares. Moreover, you are not limited in the combination of colors and textures - the originality of the product is guaranteed.
Materials and tools:
- textile;
- foam;
- batting (sintepon);
- plywood or very durable cardboard;
- scissors;
- jigsaw;
- glue or screws;
- screwdriver;
- hooks for hanging;
- furniture stapler.
Job description
Decide on the materials and start creating your own masterpiece from soft squares.
Step-by-step description of the work:
- We cut about 60 squares from plywood or cardboard - the size and size depend on the dimensions of the future headboard.
- We cut out squares of the same size from foam rubber, and slightly larger squares from batting - with an allowance for the overlap on top of the foam rubber.
- Lastly, we cut out a square of fabric, taking into account that its edges should go to the back side for fixation.
- Now we assemble the squares in this order - plywood, foam rubber, batting, fabric.
- Fasten the fabric to back side products using a stapler.
- We prepare a base from plywood, MDF or durable cardboard according to the size of all the squares folded together.
- We attach our squares to the base with glue or self-tapping screws.
This headboard is hung on the wall using special hooks. Using this technique, you can create both a plain headboard and a patchwork style.
Master class No. 3 “headboard in carriage style”
Carriage tie or capitonne is a fairly common method of furniture decoration, inspired by the way carriages were finished in the 18th century. This soft upholstery, fastened with rivets to the base, forming a pattern in the form of squares or diamonds. This decor looks aristocratic, bringing a feeling of comfort and stability to the interior of the bedroom.
For this type of headboard decoration, it is best to choose a heavy one. expensive fabric, which forms luxurious folds.
Perfect for:
- leather – natural or artificial;
- velours;
- velvet;
- faux suede.
These are dense materials capable of forming distinct, beautiful folds - they are the goal. The fabric may have a pattern that suits your design. the image being created. Therefore, light fabrics with simple patterns are completely unsuitable for carriage screed.
The following materials are used for screeding:
- buttons covered with fabric;
- massive beads;
- crystals.
Buttons can be matching or contrasting - both methods give their own unique effect. Classic contrasts of black and white in the art deco style are good. You can use fabric rose buttons together as a romantic element.
Materials and tools for work:
- a sheet of plywood or a board with holes;
- foam rubber 50 mm thick;
- padding polyester;
- rubber glue;
- thick paper;
- strong thread;
- large needle;
- marker;
- buttons;
- thick fabric;
- furniture stapler;
- electric jigsaw;
Job description
For this mission, you will need a board with special holes or a sheet of plywood on which the same holes will be made.
This method requires accuracy and diligence, but the result is worth it - king bed in your house. The description and video will help you do all the work without errors.
Step-by-step description of how to make an upholstered carriage headboard:
- Cut out the plywood and foam rubber to the desired shape.
- We make markings on plywood or a board with holes in accordance with the screed pattern - in the form of squares or diamonds (diamond mesh). On the finished board you just need to mark the holes needed for the job, on plywood - drill them.
- Prepare paper on which we make exactly the same markings.
- We place paper on top of the foam rubber and mark the holes using a marker.
- The most important step is to make holes in the marked places. To do this, use a knife.
- Foam rubber needs to be glued to plywood or board rubber glue so that the holes of both materials coincide.
- A layer of padding polyester is glued onto the foam rubber, on which you need to make holes according to the same markings.
- Carefully stretch the fabric and fix it with a furniture stapler. At complex forms headboard, you also need to use a needle and thread, pulling the fabric from the center and evenly distributing it to the edges.
- Cover the buttons with fabric or leave them as is - it all depends on the design of the buttons.
- We sew the finished buttons into the designated sockets and secure them with strong threads - starting from the center, continuing horizontally on both sides.
- It is difficult to fix the thread on the plywood; it is better to use the same stapler staples. We entangle the thread between them and securely fasten them. The headboard is ready!
You can make holes with a drill in foam rubber and plywood at once, but to do this, you need a special attachment for the drill. In addition, this method requires certain skills - one mistake and you can ruin everything. A soft headboard can transform your bed, your bedroom and your mood. Making it is not at all difficult, you just need to carefully study the video and master class. It will take you no more than a day to make such a bed update, and for the option without screeds you only need a couple of hours.
Video gallery
Have you started a renovation and want to create a unique atmosphere of comfort and style? Or have you thought about how to transform your bedroom by adding a few decorative elements? In any case, a beautifully designed headboard will come to the rescue. Is it possible to do it yourself? What materials will you need and where to start? Let's figure it out together!
Key points when choosing a headboard
If you decide to create a headboard for your bed yourself, consider several important conditions.
- Functionality. If you are going to use the headboard as a support when reading or watching movies in the evening, then it is better to choose soft product made of material that is easy to clean.
- Room size. In small bedrooms where it is not possible to install bedside table, it is convenient to make a wide headboard in the form of shelves. For a spacious room with high ceilings choose a large design.
- Style. If the room has a certain stylistic direction, then the headboard should emphasize and continue it. By creating a new image of the room, you can do original backrest the bed is the central part of the composition.
You can visually lengthen the walls by making the height of the headboard greater than the width.
Interior styles that will successfully complement the headboard
There are many various styles interior, where the headboard helps create a unique environment.
- Baroque. This style is associated with luxury, pomp, and wealth. Brocade, velvet, fringe, stucco, wood, marble, gilding are the main materials for creating interior elements.
- Provence. This style comes from France and combines classic elements with rustic details. Provence is characterized by delicate pastel colors, as if burnt out by the bright sun.
- Vintage. Feature- interior filling various elements antiquity.
- Art Deco. It combines many different styles: from the Empire style to the primitives of African tribes. The lines in the interior are straight, the materials are natural. There is a lot of abstraction, everything is simple, but very original.
- Loft. The combination in the interior of elements of abandonment or incompleteness and the latest technical solutions. Lots of free space, minimum partitions and decorative elements.
- Patchwork. This style is characterized by the use of textile fabrics created using patchwork technique.
- Eco-style implies as many natural elements as possible in the interior. For example, a bed made of solid wood, stone walls, vertical gardening.
- Ethnic style recreates the atmosphere of a people’s home. For example, japanese style, oriental or tropical.
- Boho. A plank figured headboard is always bright, but at the same time cozy. Elements of self-expression and freedom are the basis of this style in the interior.
- Eclecticism. The interior combines several different styles, similar in focus and united by a common decor.
Materials from which the headboard can be made
To create soft headboards you will need a rigid base: a sheet of plywood, elements old furniture. Her appearance not very important, it will still be hidden behind the upholstery. You can use natural or artificial leather as the outer layer. Textiles look very beautiful. Velvet for baroque, golden satin for rococo, floral motifs for ethno style and so on.
Options for soft headboards in the photo
A soft headboard can also be assembled from pillows using textiles and filling.
Do you have unnecessary ones? window frames? Then you can make a soft headrest out of them by adding beautiful textile upholstery with filling.
Popular and simple technique- decoupage. With its help you can create a unique design of the bed parts.
The simplest option is a headboard made from an old mattress. You can embroider it in the desired style or upholster it with suitable material.
All that remains is to think about the fastening of such a structure, although if the mattress is large enough, you can simply nail it to the wall.
The internal soft lining between the frame and the upholstery is made of foam rubber. This is the most cheap option for manual work.
Rigid headboards are most often a decorative element, with the exception of a shelf headboard. The materials for their creation may be different.
- One of the most simple options- a headboard assembled from ready-made purchased boards. All that remains is to fix them on the wall and add sconces.
- Leftover wooden pallets can become stylish detail interior This option is very simple and easy to use.
- The work of creating a product on a carved metal base to which wooden boards are attached will be a little more difficult.
- If you have some unwanted wooden gates, why not use them as a quirky feature for your room?
- Are you a professional carpenter, artist or woodcarver? Then decorating homemade design won't cause you much trouble.
- A mosaic headboard will give your bedroom unique style or refresh an existing one.
- Metal forging - great option to create a bed backdrop.
- Is wicker weaving your favorite activity? Then perhaps you can handle this option.
- Do you love to knit and can you handle large-scale fabrics? Then this option is just for you.
Mirrored headboards deserve special attention. They are easy to make, look luxurious, visually expand the space and make the bedroom brighter.
Mirrored headboards in the bedroom - gallery
Imitation of bed headboards
Do you love and know how to draw? You have the opportunity to display a unique headboard on the wall behind your bed.
If drawing is not your thing, then you can simply apply a pattern using a stencil. It also looks impressive.
If you don’t want to draw or invent something yourself, use a carpet. It can decorate your bedroom and become an integral part of the created style.
How to update the interior and decorate the wall at the head of the bed - video
You can update the bed yourself using the most unusual details. All that is required from the master is a little skill and imagination.
Unusual bed decorating ideas - gallery
Do-it-yourself soft headrest: step-by-step instructions
A soft headboard is suitable for decorating a nursery. It can be covered with textiles and attached to the wall so that children feel comfortable while sleeping or playing.
Tools and materials required for work:
- plywood sheet 100 x 75 cm;
- strip of plywood 5 x 60 cm - 2 pcs.;
- strip of plywood 9 x 60 cm - 2 pcs.;
- a thick piece of foam rubber 100 x 75 cm;
- thin foam rubber 120 x 95 cm;
- upholstery fabric 120 x 95 cm;
- drill:
- staples,
- furniture stapler;
- anchor bolts.
Instructions for creating a soft headboard.
- We place a piece of thick foam rubber on a sheet of plywood and trim off the excess with scissors.
- We put thin foam on top of the thick foam and fasten it to the back of the plywood with a stapler, covering the sharp edges of the board.
- We lay and smooth the upholstery fabric on top of the thin foam rubber. We fasten it from the middle, pulling it a little.
- We form a safe corner, trying not to overtighten the fabric and create as few folds as possible. We nail it onto the brackets exactly to the corner. At the end we fold and secure.
- The soft headboard is ready. We fix it on the wall L-shaped brackets. All that remains is to set up the bed.
How to make a low headboard with upholstery - video
Making a rigid wooden structure
The wooden headboard, created from oak planks, carries decorative function and complements the interior very well.
To create you will need:
- three oak boards length 180 cm and thickness 3 cm;
- chisel for peeling bark;
- jigsaw;
- anchor bolts and metal profile for wall mounting;
- manual gas burner;
- car varnish
Manufacturing instructions.
- We position the boards as they will be at the headboard and label them to make processing easier.
- We debark the boards using a chisel.
- To ensure that the boards fit well together, mark the joining line with a pencil and saw off the excess with a jigsaw.
- We install the boards on specially assembled supports.
- We burn the boards using a hand-held gas torch.
- After firing, we coat the boards with varnish, in this case auto varnish was applied.
- We assemble the structure, fasten the metal profile and hang it on the anchor bolts.
- The headboard is ready.
Monday, April 22, 2013 15:42 + to quote book
Headboard made of patchwork pillows
How to make a patchwork bed headboard
It's beautiful and originalpatchwork bed headboard, in my opinion, would look cool in a guest or children's bedroom.
To make it, you can use colorful patterned or plain fabrics. By choosing the appropriate tones, colors and patterns, such a patchwork bed can be fitted into any existing setting.
And finally, the most important thing is that a patchwork headboard is very easy to make...
I came across a similar recipe and took the time to try it, which I don’t regret.
In the example in the photo, green, orange and white fabrics were used for patchwork pillows, which goes well with general color in the bedroom.
About making a backrest from patchwork pillows
We will need:
— 2 sheets of 19mm plywood
- Saw, hacksaw or something similar (you can ask to cut the squares of your men)
— High density foam rubber.
— Batting
- Glue.
— 1 meter of fabric in each of four colors
- Scissors
— Stapler and 8mm staples
— Adhesive tape
— Screwdriver and approximately 35 screws
— Two fastenings — hangers on the wall.
To begin, we cut one sheet of plywood into pieces 200 x 200 or take ready-made ones.
We cut foam rubber and batting into pieces 200 x 200 mm.
We cut the fabric into pieces 300 x 300 mm.
Now some explanations for the instruction picture:
1 Take a piece of plywood 200 x 200 mm and glue foam rubber onto it so that it does not slip.
2. Add a layer of batting and fabric.
3. We get three layers, laid face down on the work surface.
4. Pull the fabric along the edges, first on one side, tuck in the excess and punch it with a stapler.
Pull the fabric to a stiff, but not too tight surface, first on opposite corners of the pillow. Then we fold the corners and carefully punch them.
We repeat this on all sides and catch the pillow, making sure not to overtighten it too much.
5 Follow steps 1-4 and get 40 patchwork pillows.
I want to say that it is easier to work according to a template, it turns out faster and more convenient.
6. Place all pillows face down. We twist them around the perimeter so that they do not fall apart. Then we take the second uncut piece of plywood, align it and secure each pillow through it with screws. You need to mark the places where you should tighten the screws and choose a screw number so that you don’t pierce the plywood on the cushions right through, otherwise you might get hurt later.
And finally on back wall We attach hanging loops to the headboard and everything is ready for installation.
If you don’t want to hang the patchwork headboard on the wall, you can do it differently. We attach two legs to it that are slightly lower than the bed. And then we simply install it between the wall and the standard headboard...
The original appearance of your bedroom is guaranteed!
The background to the creation of the headboard was as follows. On the one hand, I didn’t want to pay several thousand euros for an Italian or French bed, but on the other hand, I really wanted to create something special. And then it was decided that we would make the bed ourselves. So, I’ll show you how the process of creating this beautiful bed went.
I formulated the problem like this. We need to make a bed with a fairly wide base with removable cover and with a figured headboard.
First, a whole collection of headboards was assembled. After reviewing it, a shortlist was formed, which was analyzed for the complexity of implementation on site. As a result of weighing all the pros and cons, a prototype of the future headboard was chosen.
So now everything is in order.
1. We ordered a prefabricated MDF bed frame. Previously, two orthopedic bases were transferred to the workshop, purchased from IKEA, the dimensions of which were starting point to calculate sizes.
2. Cut out the shape of the headboard.
3. Dismantle the headboard and start upholstering it. Foam rubber 5 cm thick was pre-cut in the workshop according to a pattern taken from the headboard shape. We apply foam rubber to the headboard and fix it with glue (special glue for foam rubber) in several places.
4. Use a furniture stapler to nail the edges of the foam rubber to the plywood.
5. We proceed directly to stretching the fabric. We start from the bottom to fix the fabric evenly, then place the headboard vertically and stretch the fabric. To go around the corners, we cut the fabric.
6. Place the headboard vertically and check the symmetry and uniform tension of the fabric.
7. Let's start working with furniture nails. First we upholster the outer edge.
8. Make chalk markings for the second line of furniture nails. To mark this line, we first punch it with a furniture stapler.
9. Along the line marked with a stapler, we nail the nails of the furniture tape.
10. On the reverse side we cover everything with technical fabric.
11. Let's start with the frame. We cover the outer perimeter and the upper surface of the frame with foam rubber.
12. We make a pattern for technical fabric, which will be fixed under the finishing removable cover.
13. Using a furniture stapler, we nail the technical fabric on the top and bottom sides of the frame.
14. Making a pattern for a removable cover.
15. Nail one part of the Velcro to the frame. The second half will be sewn directly to the cover.
16. Check how the cover fits and adjust if necessary.
The quilted headboard cover can be made from the same fabric from which you made the bedspread and draperies, or try combining several different fabrics. If you want the cover to emphasize the strict shape of the headboard, take a non-bright, plain satin. The cover will look better if you make a lining from metcal, specially treated against shrinkage, which, however, can be replaced with an old sheet.
In order to find out what size your headboard is, take a cellophane film and apply it to the headboard, circle the front and back of the headboard with a marker. Then cut out both pieces and get the desired size and shape, which can be adjusted depending on what you want. We pin the parts to the fabric with needles, but remember that this natural size and you need to make a seam allowance of 1.5-2 cm.
If your bed is close to the wall, then the back part does not have to be made of the main fabric; you can replace it with a cheaper one. Then the front part of the case can be decorated as follows: draw out the part with squares or diamonds. Then, cut out the lining (you can use padding polyester) and the bottom piece, chop off all three parts and stitch along the lines you drew. You can also sew buttons at the intersection of lines, after stitching, cover them with the main fabric and sew them on, you can sew on rhinestones or beads, as you like.
Next, measure the thickness and length along the top and sides of your headboard. Now cut a straight strip width = thickness + seam allowance, length = length along the top and side edges + seam allowance. We sew this strip with one side to the main fabric, the other to the fabric that will be your back.
On the front and back halves of the headboard, do not forget to add 5 cm to each part below.
That’s it, turn it inside out and put it on, the bottom of the fabric can be carefully stapled or hemmed by hand. Your headboard is ready, truly beautiful!!!
The headboard of the bed is an integral part of bedroom furniture. It not only makes the furniture comfortable, but also plays an important role in the interior of the bedroom.
You can always rely on this detail. After all, we all love to watch TV with a cup of tea before going to bed. It is much more comfortable to do this while sitting.
To do this, you need a support, which is the headboard.
It also protects the wall and wallpaper from rubbing, which will preserve the freshness and beauty of the finish.
You can make a headboard with your own hands for:
- soft;
- figured;
- in the technique of carriage screed;
- from shreds;
- from pillows and so on.
Upholstered headboard for bed
Let us present to you the simplest option that any man can do. Even those who do not have construction skills.
In order to make a soft headboard in rectangular shape you need:
- a rectangular piece of plywood (can be replaced with any shape, so the head of the bed will have a different shape);
- thick fabric;
- foam;
- padding polyester;
- construction stapler.
You will spend a maximum of 3 hours on such beauty, and if you do it more than one, then even less.
How to make a soft headboard for a bed
We take a plywood sheet, preferably thicker, and put two layers of foam rubber on it.
We take an unnecessary piece of fabric, place it on plywood and foam rubber so that it extends beyond their edges by about 15-20 centimeters, and fasten it with a stapler.
On top of the fabric we staple a beautiful flap that matches your home interior.
As you can see, the method is quite simple and fast, so in a few hours you will transform your bedroom.
DIY figured headboard
This headboard will also be soft, but will have a special relief that will add chic and richness.
For it we will need:
- plywood sheet;
- chalk or soap;
- foam;
- stapler;
- waste material;
- upholstery fabric;
- furniture nails.
It is better to choose a universal construction adhesive that can easily glue fabric and foam rubber.
We need chalk or soap to mark the fabric in order to cut out an even piece.
How to make a curved headboard
You need to start with a sketch from which you will make your drawing and markings. It can be of any shape. Usually a light relief is made.
If you have the necessary skills, you can cut out flowers and other patterns, but this is a rather difficult task.
We cut out our drawn blank from plywood, foam rubber and fabric. It’s worth first trying on a paper blank so that it fits into a common room or another room.
We do the same steps with the fabric.
Raise the head of the bed horizontally and start pulling the fabric from the back using staples.
Make cuts in the fabric so that it can perfectly match the relief of the plywood headboard.
Decorate the upholstery with furniture nails, securing them 1 centimeter from the edge of the head of the bed.
To make the second line decorative decoration using carnations, make markings with chalk, stepping back about 10 centimeters from the first line.
Nail the nails along the marked line.
Cover the back side with an unnecessary piece of fabric, securing it with a stapler.
Attach the headboard to the bed or wall. You can also simply place it on the floor near the edge of the bed, leaning against the wall.
Quilted headboard using carriage screed technique
Such a headboard will be soft and can be found quite often in many stores. This is considered modern and interesting design beds.
We need all the same materials:
- plywood;
- foam;
- stapler with staples;
- air gun;
- padding polyester;
- textile;
- cord;
- big buttons with fabric surface.
We take plywood and coat it with glue. Then we glue foam rubber to it, the thickness of which should be at least 5 centimeters.
We put large leaf paper and draw button holes on it. It is advisable to make them evenly around the entire perimeter.
Cut holes in paper or cardboard.
We apply the sheet to the foam rubber and use a felt-tip pen to outline the holes.
To transfer the holes to the foam rubber, you need to use a drill with an attachment.
You can glue padding polyester onto the foam rubber by making exactly the same holes as we did on the foam rubber.
If desired, you can do without padding polyester. It just makes the headboard softer.
We stretch the upholstery material and use a drill to make holes to the very end, since we will pull the cords on the buttons through the entire layer.
We pull the cord through the buttons and thread them through the hole. For convenience, you can use some kind of hook.
Tighten the cords well so that the buttons fit snugly against the upholstery of the head of the bed. We secure the ropes with a stapler.
Upholstered bed headboard made of rags
If you don't want to spend money on a large piece of upholstery material, you can replace it with various scraps.
This could be old jeans, dresses or any other clothing. Thus, this method It will turn out to be very profitable and economical.
We need:
- 2 sheets of plywood;
- saw;
- scissors;
- filler for the headboard (foam rubber or synthetic winterizer);
- scraps of fabric;
- glue and adhesive tape;
- stapler;
- screwdriver;
- self-tapping screws
How to make a soft headboard from scraps
We draw a sheet of plywood into squares or rectangles. Next, take a saw or hacksaw and start cutting out these shapes.
We cut the foam rubber or padding polyester into the same shapes, but cut out a piece of fabric a few centimeters larger.
We glue each layer: plywood - foam rubber - fabric. The fabric should be stretched quite tightly so that wrinkles do not form. This can be done in the same way.
Secure the fabric again with a stapler to be secure.
Thus, we make all the shapes, creating elements of a soft headboard for a bed from scraps.
We lay out all the squares on the floor with their front sides, forming the future headboard. We glue them together with adhesive tape.
We take the second plywood and put it on our squares. Using a screwdriver and self-tapping screws, we attach each pad to a plywood sheet.
Select the length of the screw in advance so that it does not go through and damage the head of the bed.
Everything is ready! You can attach it to the bed or wall, or just prop it nearby.
DIY headboard for a bed made from pillows
For this we will need many small pillows. It depends on their number, size and the desired size of the headboard.
We take pillows, which can be of different colors or plain ones, and sew them to one another at the corners.
You can attach the pillows to the wall using glue or nails. The glue in this case will be the best solution, as the nail may eventually rip through the cushion.
This will damage your headboard and may cause injury. Another great way attach the pillows to the curtain rod.
It can also work as a headboard for a bed. It's just as easy to make and looks gorgeous.
Also great idea may become decorative fence. This option will not appeal to everyone, but rather to those who like to hang things on the head of the bed.
If you are not afraid of rigidity, then build a headboard from regular boards. Paint it or write your names, drawings, etc.
If you can draw beautifully, then you are lucky. You can create a fairy tale in your room.
Draw a fantastic headboard on the wall, wallpaper or graphite board. An unimaginable impression will be created.
Place a sheet of plywood on your table. Go over it with 180-grit sandpaper on both sides, 3 to 4 times on each section of the surface, front and back. Repeat the process with 200 or 220 grit sandpaper.
- Sweep away dust with a brush. Wipe the surface thoroughly with a cleaning cloth.
- Apply adhesive spray to the front surface of the plywood. Glue 5cm wide foam onto it. Follow the instructions on the adhesive package during application and drying to ensure the foam adheres well.
- Your foam rubber is unlikely to cover the entire surface of the back in the size it comes in the package. You may have to glue several pieces of foam side by side vertically or horizontally to cover the entire front.
Use electric carving knife to cut off excess foam. Plug it into an outlet and then place it flush with the edge of the plywood before turning it on. Work around the perimeter slowly, making the shape of the headboard even and professional.
Place a layer of batting on top part foam rubber after it has dried. Batting is a material used to fill blankets and pillows. Trim the batting to a margin of 15 cm on each side.
Move one end of the plywood so that it hangs over the edge of the table. Lie on your back under the plywood. Have a friend hold the batting to prevent wrinkles while you attach it to the back of the headboard.
Attach the batting to the plywood using staples. Pull the batting tightly over the edge of the headboard and then attach it to the back surface. Repeat this process around the entire perimeter of the plywood every 2.54 cm until you have trimmed the entire back.
- When you upholster the corners, make a fold in the batting on one side of the corner and pull it down. It's similar to how you would wrap a gift. Pull tightly and secure with 3 to 4 staples. Trim off excess batting.
Place the faux leather on top of the batting. Lay it evenly so that there is a margin of 5 - 10 cm around the entire perimeter of the back of the plywood. If you need to sew several pieces of leather together, you can do this by hand or using an upholstery needle on a sewing machine.
Start attaching the fabric from artificial leather in the center of one of the sides. Work your way around the sides of the fabric, leaving the corners for later. Pull the fabric, but not so hard that the fabric begins to warp.
- Return to the corners when you've finished all sides of the plywood. Stretch one side of the fabric in the corner and pin along the edges on both sides of the corner. Fold the other side of the fabric at a 90-degree angle, stretch and staple. You should end up with a corner with one even fold of fabric. Repeat this procedure with the remaining corners.
- If you have rounded corners, you will need to fold the fabric similar to how you would fold a sheet under a mattress. Secure all sides of the headboard first before working on the corners. Pinch the skin in the center of the fold and pull down. Secure this area with a staple. Pinch and pull the fabric down along both edges of the fold, creating even lines.