Gas boilers Proterm Bear 30. Advantages of Bear boiler equipment. No interest is charged when paying by credit card

Fuel type

Fuel types heating boilers divided into gaseous, liquid, solid, or matter burned to produce heat.
Among heating boilers, you can also include in a separate group electric boilers- the most environmentally friendly of all types of boilers.
The cheapest type of fuel in Russia today is natural gas. What follows solid fuel, electricity and diesel fuel.

Nominal pressure gas, mbar

Nominal gas pressure (mbar) - gas pressure at which the boiler provides the passport thermal power. In passports for imported boilers, gas pressure is indicated in millibars.
According to Russian standards for supplying gas to residential buildings gas pipelines are used low pressure. The pressure in the gas pipeline should be no more than 0.003 (0.03) MPa (kg/cm2) or 30 mbar.
The gas pressure supplied to the burner is always indicated in the boiler passport and is regulated during commissioning works specialists service department.

Natural gas consumption, cubic m/h

Natural gas consumption (cubic m/h) - the amount of gas used by the boiler installation during burner operation.
Besides traditional insulation buildings and pipelines, gas consumption for heating can be significantly reduced through the use of boiler automation controlled by outdoor temperature, boilers with modulating burners and the use of condensing boilers with low-temperature heating systems

Chimney diameter, mm

Chimney Ø, mm - minimum diameter of gas exhaust pipes and chimney. This size is indicated in the boiler passport.

Reducing the cross-sectional area of ​​the chimney strictly prohibited!

With household wall-mounted gas boilers with a fan burner, coaxial (pipe-in-pipe) chimneys are used, allowing the supply to the boiler fresh air and remove exhaust gases from the boiler.

Weight without water, kg

Weight without water (kg) - the rated weight of the boiler without filling with coolant and water.

Installation

Boiler room installation includes:

Installing and securing the boiler in place;

Connecting the boiler to the central chimney or connecting the wall passage kit;

Connecting the boiler to the heating pipes;

Installation protective equipment(safety group, expansion tank)

Installation of a coarse filter;

Installation of drain valve;

Connection of the make-up line;

If necessary, installation of a boiler pump, mixing pump, hydraulic separator, distribution manifold;

If necessary, partial assembly/disassembly of the boiler

Installation and connection of one heating group (each subsequent one - 5,000 rubles);

Filling the heating system with coolant;

Pressure testing of the heating system.

Water heater installation includes:

Installing and securing the water heater in place;

Installation of a direct loading line from the boiler with its own pump;

Connecting the water heater to the cold and hot water lines;

Installation of a recirculation line if necessary;

Installation of protective equipment (safety group, expansion tank);

Installation of drain valve;

Installation shut-off valves and instrumentation;

If necessary, installation of a heat-insulating casing;

Filling the water supply system with water;

Filling the heat exchanger line with coolant;

Pressure testing of heating and water supply systems.

Commissioning

Commissioning works include:

Checking the correct installation of all equipment

Checking the system for leaks

Grounding check

Connecting the boiler to the gas main (diesel)

Installation and electrical installation of weather-compensated automation (if available, additional 6,000 rubles + 1,000 rubles for each additional circuit)

Setting up automation

Setting the combustion process

Checking and adjusting the boiler operation in all modes

Commissioning also includes detailed instructions persons responsible for the operation of the boiler installation.

After commissioning, the equipment is put under warranty.

Annual service

Service includes :

Diagnostics of boiler equipment

Topping up the system, pumping up expansion tanks (if necessary and if service taps are available)

Cleaning combustion chamber boiler unit

Control and adjustment work by burner device

Inspection and adjustment work on the automation system

Cleaning dirt filters

Prompt service for emergency calls from the Customer (on-site, diagnostics, repairs)

The cost of annual service includes the cost of the listed works and does not include the cost of spare parts, which are supplied free of charge under warranty or for an additional fee. Annual service is prerequisite maintaining warranty obligations.

You can pick up the purchased product yourself or use the delivery service in Moscow and the Moscow region. By placing an order today, you will receive it at your disposal tomorrow. If necessary, you can use the prompt delivery service and receive your products today.

Delivery to the entrance (check with the manager about the possibility of lifting to the floor)

Delivery is made daily from 9 to 21 o'clock , including weekends and holidays.

Goods worth up to 6,000 rubles can be picked up by self-pickup.

Pickup points

For orders worth more than 6,000 rubles:

• Within the Moscow Ring Road - from 0 to 500 rubles, (individual delivery cost is indicated in the product card)
• Outside the Moscow Ring Road up to 10 km - 700 rubles,
• Beyond the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
• To the regions, delivery by a transport company (calculated individually).

Delivery cost for

km from MKAD

700 rub.

Unloading of large-sized goods is carried out by the efforts and means of the customer.

The money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and convenience of calculation.

Payment by bank card to the courier upon receipt

Couriers have a portable banking terminal, which allows clients of the Teplovod-Service company to pay for goods with bank plastic cards (check with the manager about the possibility of paying by bank card).

Payment by credit card on the website

To select payment using a bank card, on the “Cart” page, you must select the “Payment by bank card on the site” item.

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:

After clicking on the “ONLINE PAYMENT” button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.

Please prepare your plastic card in advance. Additionally, you need to enter your full name, email, contact phone number, and reservation number to identify the payer. The connection to the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the Verified By Visa or MasterCard Secure Code technology for secure online payments, you may also need to enter a special password to make a payment. You can check the methods and possibility of obtaining passwords for making online payments with the bank that issued the card.

This site supports 256-bit encryption. The confidentiality of the reported personal information is ensured by Sberbank of Russia OJSC. The entered information will not be provided to third parties except in cases provided for by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.

When paying by credit card, no interest is charged.

Payment is a transfer cash from the buyer's current account to the seller's account, we work on common system taxation including VAT. Delivery of goods is carried out after receipt of funds to the account of the company Teplovod-Service LLC. This method is used for calculations by legal entities.

Our details

Limited Liability Company "Teplovod-Service"

OGRN: 1105003006162

Taxpayer Identification Number: 5003088884

Checkpoint: 500301001

BIC: 044525225

Bank: PJSC “Sberbank of Russia”

R/s: 40702810838060011732

S/s: 30101810400000000225

Legal address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoe highway, 21 km., office B-6

Special conditions

For goods with the status "To order" worth up to RUB 100,000. no prepayment required.

For goods with the status "To order" over 100,000 rubles. An advance payment of 30% is required.

• For any product sent by a transport company, 100% payment is required.

Reviews of the product “Floor-standing boiler Protherm Bear 30 TLO 26 kW"

There are no reviews for this product yet. Your review will be the first!

Leave your review

Rating - 5

Score - 1 Score - 2 Score - 3 Score - 4 Score - 5

Leave feedback

Warranty terms

The manufacturer of PROTHERM brand heating equipment provides a minimum 2-year warranty on its equipment, unless otherwise installed. Warranty obligations are fulfilled by the company - service center or equipment seller.

Please note that the manufacturer's warranty is valid only if installation and commissioning were carried out by a certified employee of a specialized organization. However, having a Protherm certificate does not eliminate the need additional certification personnel of a specialized organization in accordance with those in force in the territory Russian Federation legislative and regulations related to the scope of activities of this organization.

Fulfillment of warranty obligations provided for current legislation, in the region where the Protherm equipment was installed, is carried out by the seller of your device, a service center, or an organization associated with it under a contract authorized to carry out warranty and non-warranty repairs of Protherm products.

The company performing warranty or non-warranty repairs of Protherm equipment will, during the warranty period, eliminate free of charge all deficiencies identified by it that arose through the fault of the manufacturer. Specific warranty conditions and the duration of the warranty period are established and documented during the sale and commissioning of the device. Please pay attention to the need to fill out the “Sales Information” section, where you enter the serial number of the device, sales marks and corresponding seals, dates of sale and the seller’s signature in the warranty cards located on the back of the product passport.

The manufacturer's warranty does not apply to products whose malfunctions are caused by transport damage, violation of transportation and storage rules, the use of anti-freezing coolants, contamination of any kind, including hardness salts, water freezing, unqualified installation and/or commissioning, non-compliance with operating instructions. installation and operation of equipment and accessories and other reasons beyond the control of the manufacturer, as well as installation and maintenance of the device.

The established service life is calculated from the moment of commissioning and is indicated in the documentation attached to the specific product.

The Protherm plant guarantees the possibility of purchasing any spare parts for this product for at least 8 years after its discontinuation.

For Protherm equipment and accessories, the manufacturer establishes a warranty period of 2 years from the date of commissioning, but not more than 2.5 years from the date of sale to the end consumer.

The warranty on spare parts is 6 months from the date of retail sales subject to installation of spare parts by a Protherm certified specialist.

If there is partial or complete absence of information about the sale and/or commissioning, supported by documents, warranty period is calculated from the date of manufacture of the device. Serial number The product contains information about the date of manufacture: numbers 3 and 4 are the year of manufacture, numbers 5 and 6 are the week of the year of manufacture.

An organization that is an authorized Protherm service center has the right to refuse to the end consumer warranty repairs equipment, the commissioning of which was carried out by a third party, if an authorized specialist service center the above reasons will be found and will exclude the manufacturer's warranty.

The Protherm Bear 30 TLO floor heating boiler is built using a non-volatile design and is equipped with a durable two-pass cast iron heat exchanger. It has a simple design and can work with external boilers indirect heating. Main features of the model:

• Thermal power - 26 kW;
• Affordable price;
• Possibility of working on liquefied gas;
• Mechanical system management;
• Open combustion chamber;
• High efficiency;
• Adaptation to Russian conditions work.

The Protherm Medved 30 TLO boiler is suitable for use in premises of any purpose.

Model description

The non-volatile floor-standing boiler Protherm Bear 30 TLO does not require connection to the electrical network and can operate in buildings without electrification. The flame is ignited using a reusable thermoelement. The boiler is made in a compact rectangular body, which does not take up much space in boiler rooms and heated rooms. The thermal power of the model is sufficient to heat buildings up to 260 square meters. m. Hot water supply is provided through connected indirect heating boilers of any brand.

The Protherm Bear 30 TLO floor-standing boiler is assembled on the basis of a cast iron heat exchanger. This design allows for durability and corrosion resistance. Cast iron resists corrosion well and ensures uninterrupted operation of equipment without succumbing to the destructive effects of temperature changes. Despite the use of cast iron heat exchangers, Protherm boilers have a balanced price.

The Protherm Bear 30 TLO boiler operates not only on natural gas, but also on liquefied gas. To do this, the equipment is reconfigured using additional jets. The pressure of liquefied gas should not exceed 30 mbar, natural gas - 20 mbar. Fuel combustion is carried out in the combustion chamber open type, with natural removal of combustion products through a traditional chimney. The temperature in the heating circuit is controlled using thermometers and pressure gauges. There is also overheating protection and a gas control system on board.

The control in the floor-standing boiler Protherm Medved 30 TLO is mechanical and does not require a power source. The user’s main task is to set the appropriate temperature of the coolant, focusing on the thermometer readings and his own feelings. The efficiency of the model is up to 90%, depending on the selected operating mode. The boiler copes with its duties at reduced gas pressure and at low temperatures environment.

Other features of the model:

• Burner from stainless steel;
• Protection of the heat exchanger from condensate;
• For use in systems with natural circulation coolant;
• Traction control system;
• Possibility of control from a room thermostat.

You can buy a floor-standing boiler Protherm Medved 30 TLO with delivery throughout Moscow and Russia in the Teplodvor online store.

With the onset of winter, we begin to appreciate the warmth and comfort of our home more and more. The thrifty owner is especially pleased with the modest energy bill. A gas boiler from the manufacturer Proterm perfectly combines heating power and energy efficiency.

Protherm is a Slovak heating equipment company that has been supplying its products to Russia for several years now. If you compare buying a boiler with a car, then gas floor standing boilers Proterm company is a high-quality and inexpensive " middle class» European quality. Thanks to a reliable Russian distributor, goods from Slovakia arrive without extra charges, and components and parts for warranty service are delivered from the factory to as soon as possible. The company produces equipment various types and power: electric and gas, wall-mounted and floor-standing boilers. Gas boilers are represented by dozens of models designed for indoor use. different sizes, with one or two heating circuits.

• Double-circuit boilers perform the task of heating and hot water supply (DHW), producing separate heating liquids: sanitary, entering the radiators and bathrooms, and drinking - into the kitchen. Their system has a built-in water heater of 30-60 liters. If the house uses several water intake points or consumes a large volume of it, it is better to install the second option.
• A single-circuit (heating) boiler is equipped with an indirect heating boiler. In this case it is possible maximum flow hot water without unnecessary load. In addition, Proterm designs use room temperature controllers and heat the heating and hot water liquid independently of each other.

Popular Protherm models

Popular models for country houses And city apartments are equipped with Panther and Cheetah gas wall-mounted boilers, and Bear floor-mounted boilers.

Name	Installation type	DHW	Maximum power, kW	Combustion chamber	Price, rubles
Protherm Panther 25 KTV	Wall	No	24,6	Closed	33 670
Protherm Cheetah 23 MTV	Wall	Eat	23,3	Closed	27 610
Protherm Bear 30 PLO	Floor	No	26	Open	37 780
Protherm Bear 30 TLO	Floor	No	27	Open	45 470

The combustion chamber type can be open (MOV) or closed (MTV). Thus, the Cheetah series is represented by both options. MTV allows you to install the boiler in a room where there is no chimney. This is ensured by a coaxial exhaust gas system - a double pipe, which simultaneously draws in air from the street and removes combustion products.

Wall-mounted (mounted) models

1. Protherm Cheetah 23 MTV.

Installing a chimneyless boiler in a city apartment takes a minimum of time and money, allowing you to maintain comfortable temperature. Heating is carried out in the range of 38-60 °C for DHW and 38-80 for the heating system. The design is sensitive to hard water, which is confirmed by reviews of the operation of gas boilers of the Proterm Gepard 23 MTV series:

“We bought Proterm CHEETAH 23 MTV, it’s been working for 2 months. There are no complaints about the way it heats, but the hot water disappears. It turns on, goes on for 2-3 days, then turns off for a week. A knock is heard in the boiler. They called the repairman, he said: it’s clogged. I removed the scale and installed a filter, and it doesn’t seem to be knocking or turning off anymore.”

Alexey Sokolov, Kazan.

Protherm stand out for domestic market due to a decent ratio of cost and quality. The price of the Protherm Gepard 23 MTV gas boiler is not much higher than the economy class, but cheap products are inferior to it in terms of quality of assembly and service life, and, as a rule, cannot be repaired. An important stage in the operation of gas boilers is the installation work. Connecting without a specialist is always fraught with incorrect settings and constant problems in the system.

2. Protherm Panther 25 KTV.

Choose a model for a private home, office or large apartment? Proterm 25 KTV has seven modifications (12, 24 and 30 kW). Series presented wall-mounted boilers with open and closed camera combustion, single-circuit and double-circuit. This boiler is equipped with a powerful pump, which increases the rate of heat exchange in the system. For a dacha or estate, it is more profitable for you to buy a Protherm Pantera 24-28 kW boiler; according to user reviews, it is optimal for 80-250 m2 of living space.

Characteristics and description of the wall gas boiler Panther 25 KTV: compact model with built-in circulation pump, expansion tank 5 liters, modulating burner. Possible transition to liquefied gas. The control is automated, self-regulation and self-diagnosis of problems are provided. The security system protects against overheating, hypothermia and short circuits in the electrical circuit. The boiler is equipped with automatic recirculation (bypass), which allows it to work with any type of heating.

“We got the boiler of the Proterm Panther model from the previous owners. It is unknown who installed it and where to apply for a guarantee; the boiler is about 3 years old. Everything would have been fine, but at first he received an electric shock. We asked people for advice and carried out grounding. Trial run went with a bang. Let's see how it heats up in winter (the house is 80 square meters) while it heats up the sanitary water. We found the instructions on the Internet, I hope we can handle the boiler.”

Olga Chernysheva, Sochi.

“Proterm Panther 25 KTV was installed in our office a year ago. The radiators are now always warm, only once did they call the repairman: there was a drop in gas pressure and the boiler turned off. He arrived quickly and fixed it up. I want the same one for my dacha. I like that the computer itself diagnoses breakdowns and you can program the boiler.”

Alexander, Samara.

Floor models

Gas floor heating boilers Protherm series Bear are different increased productivity and reliability - perfect choice For country house. Their heat exchanger is made of cast iron, which makes it possible to heat water more efficiently due to the special arrangement of its links.

• Model 30 TLO is completely independent of electricity and has improved environmental safe thermal insulation, it is possible to provide DHW from an indirect heating boiler. According to reviews, Proterm Bear 30 TLO helps save up to 15% of gas per season.
• The single-circuit floor-standing gas boiler Protherm Bear 30 PLO has similar technical characteristics, but starts from piezo ignition. Both varieties have the function of switching to liquefied gas.

The cost of Proterm Bear 30 is in the range of 38,000 - 46,000 rubles. These boilers are in wide demand in rural areas. You can connect to them:

• simple room or program thermostat;
• pump;
• boiler thermostat.
• electric chimney extension “semi-turbo”;
• 3-way valve or pump;

The technical characteristics of the Protherm boiler allow you not only to adjust it according to your fuel consumption capabilities, but also to combine power. To switch from natural to liquefied gas for the Medved boiler, you need to replace the nozzles, install cooling rods and reconfigure the pressure settings on the gas valve.

“We bought a Bear 30 PLO gas boiler to replace a Soviet wood-burning one. I’m very pleased: it heats perfectly, a lot of space has been freed up in the kitchen. Now you can modern set install, it will fit the new boiler. They gave a guarantee for 2 years, but so far everything is in order, since the master started it.”

Maria Vasilyeva, Moscow.

Articles

Advantage of gas heating equipment undeniable. In light of constantly rising energy prices, natural gas remains the most efficient and economical type of fuel.

The worldwide popularity of the equipment determines large number companies specializing in the production of such heaters. For example, floor gas boilers Proterm Bear began to be produced in the Czech Republic not so long ago and has already gained popularity in the domestic and European markets.

Advantages of Medved boiler equipment

1. Natural gas is an environmentally friendly fuel that does not pollute environment, at the same time it is one of the highest calorie energy carriers.
2. A constant supply of fuel from centralized gas distribution systems, along with boiler automation, allows the equipment to operate without human intervention for a long time.
3. The high combustion temperature makes it possible to create boilers of compact sizes, which is important for small rooms.
4. A wide range of models with different equipment capacities makes it possible to select a boiler so that it does not work under load or does not use only part of its power.
5. Safety systems completely eliminate gas leaks and other breakdowns leading to a domestic disaster.

Model range of Medved boilers

The Proterm Bear series of gas boilers is quite extensive and includes the following models:

Bear TLO

This type boilers are produced with a power range from 18 to 45 kW. The most popular model for private houses and small cottages is Protherm Bear 30 TLO, which produces 30 kW per hour and is capable of not only heating the coolant, but also preparing hot water, in indirect heating boilers. For this purpose, the boiler is provided with a pipe for connecting an external heat exchanger.

This model is designed to work in heating systems with natural coolant circulation. Not present in the boiler circulation pump and others electrical elements, which makes the heater completely energy independent. The gas in the combustion chamber is ignited by a piezoelectric element powered by a conventional battery.

Bear KLOM

Model range Bear KLOM boilers include 4 main modifications, differing in rated power. The floor-standing Protherm Bear 30 KLOM has a power rating of 30 kW, which is quite enough to heat a house or production area of ​​up to 200 sq.m². A cast iron heat exchanger allows you to heat the coolant in the system up to +90˚ degrees, while cast iron is not subject to corrosive processes and is not afraid of the acidic effects of vapors produced during gas combustion.

The more powerful 40 kW Protherm Bear 40 KLOM boiler is equipped with flame indicators in the combustion chamber, sensors displaying the pressure of the coolant and its heating temperature at a given minute. The system for removing combustion products from the firebox is natural, but it is possible to install fans that provide forced smoke removal.

The floor-standing boiler Proterm Medved 40 KLOM is equipped with electric ignition and the ability to connect remote control systems. Together with such controllers boiler equipment is able to independently regulate the heating of the coolant and maintain a given microclimate in the premises.

The Protherm Bear 40 KLOM gas floor-standing boiler is equipped with a system that prevents overheating of the equipment and, in particular, the heat exchanger, for which a cooling circuit is provided, which comes into operation if the heat exchanger temperature reaches +110˚C. Another protection of the cast iron heat exchanger is the function of reducing the volume of condensate formed when the boiler is turned off and there is a sudden temperature change.

The most powerful boilers in the KLOM line have a power of 50 kW. and are capable of providing equipment efficiency of at least 92%. Protherm Bear 50 KLOM adapted for work in closed heating networks, With forced circulation coolant.

Bear PLO

The line of PLO boilers is represented by several models with open cameras combustion and a chimney for natural or forced vapor removal. Fans providing forced removal of combustion products are installed optionally and are not included in the delivery package of the Protherm Bear 30 PLO gas floor-standing boiler or any other model of the PLO series.

The winter/summer system, which can be adjusted once, makes the boiler weather-dependent and makes it possible to automatically change the heating temperature and operating mode according to weather conditions. The most powerful boiler Protherm Bear 60PLO allows you to connect an external boiler to heat water up to 500 liters. Multi-stage power control in manual or automatic mode makes it possible to adjust the heating temperature with an accuracy of 1 degree.

Regardless of the type of combustion products output, boilers gas Proterm Bear40 PLO are equipped with a draft controller, which ensures timely shutdown of the gas supply in the event of flame extinction as a result of lack of oxygen and smoke in the combustion chamber.

Protherm Bear 20 PLO, despite the minimum power of 18 kW, is capable of operating in systems where the maximum coolant pressure does not exceed 3 atmospheres. The equipment is equipped with electronic fuses and compensators for voltage fluctuations in the power supply system. In regions where power outages are a frequent occurrence, it is recommended to install additional rectifiers or UPS systems.