Market building materials Nowadays, it is filled with a variety of finishing materials for the exterior cladding of buildings, structures and individual houses. Among them are fiber cement slabs, which are produced using modern high technologies. These are environmentally friendly products that do not contain resins and such a toxic and hazardous component as asbestos. Fiber cement boards are a structural element in a ventilated device in buildings with solid and frame walls.
What is fiber cement board
Fiber cement boards are a modern decorative coating that is intended for furnishing interiors and cladding facades. Included in this facing material includes the following components: cement - 90%, mineral fillers and cellulose fibers - 10%. The panel structure consists of the following layers:
- fiber cement sheet;
- water-repellent layer;
- decorative layer.
Fiber cement boards, photos of which you will find in the article, can have the following dimensions: length 1200-3600 mm, width - from 445 to 1500 mm, thickness 4-18 mm. These products are made by pressing followed by heat treatment, as a result of which they have high strength, flexibility, and a uniform structure.
Differences from other finishing materials
Boards made from fiber cement weigh positive qualities, which compare favorably with other finishing materials. The main characteristics of the coating are:
- weather resistance;
- low thermal conductivity;
- good sound insulation;
- breathability.
Cladding with fiber cement boards does not require special attention and care during operation. The material is several times stronger than others, so it does not break under mechanical loads. The service life of the slabs is about 50 years.
Scope of application of fiber cement boards
This material is used for cladding stations, supermarkets, sports complexes, multi-storey and individual houses (both newly built and during the reconstruction of old ones). Fire-resistant fiber cement board, the characteristics of which allow it to be used for finishing baths, saunas, stoves and fireplaces, has a wide variety of types. The combination of this material with other decorative coatings makes it possible to create a unique exterior. The flexibility of the slabs allows them to be used for finishing buildings of various configurations. Big choice color palette and textures contribute to the implementation of any design ideas.
Advantages of fiber cement boards
Facade fiber cement boards have a number of advantages:
- strength and ductility;
- fire resistance;
- frost resistance;
- resistance to ultraviolet radiation;
- environmental friendliness and safety;
- sound and heat insulation;
- dirt resistance;
- do not corrode or rot.
Installation of fiber cement boards
Installation of fiber cement slabs begins with the construction of the frame. To do this on load-bearing wall metal brackets are attached using dowels. The vertical pitch distance between them must correspond to the dimensions of the sheet thermal insulation material, but not more than 60 cm. Horizontal sheathing profiles are fixed to metal brackets self-tapping screws or rivets.
Insulating boards are fixed with dowels, without gaps between them and the surface. The main and intermediate vertical profiles are mounted on horizontal ones. The vertical pitch distance of the main elements depends on the size of the fiber cement panels. Intermediate profiles are mounted with a horizontal distance of no more than 60 cm.
They are produced with or without grooves, of various thicknesses, which determine the installation method. Panels with grooves are secured using clamps, and thin products are attached to the vertical profiles of the sheathing with sealing tape using colored screws at a distance of no more than 40 cm vertically. In the place where the façade panel is attached, drill the required hole at a distance of at least 5 cm to the edge of the slab.
Vertical and horizontal connecting gaps between cladding products should not exceed 2 mm. If decorative façade molding is used in horizontal connections, the gap between the panels can be 10 mm. When using a corner decorative profile in vertical joints, the gap from the edge of the slab to the corner is 2 mm.
The sequence diagram for installing the plates is as follows:
- fiber cement board;
- thermal insulation layer;
- mounting brackets;
- horizontal profile;
- frame vertical element;
- EPDM sealing tape;
- horizontal decorative profile;
- surface.
Options for decorating facades with slabs
Structures can be faced with slabs that have colored coatings that imitate brick, natural stone and other cladding on the front side contains protective layer, which consists of polyurethane and acrylic. This material has a safety margin that ensures the reliability and durability of buildings. It is installed on frames using one of two fastening methods: in the form of pressure panels or with clamps.
Facade fiber cement boards, which have a natural stone coating, consist of three layers. The fiber cement sheet is located inside, the front side is covered with sawn decor in the form natural stone. On the other side of the panel there is a polymer vapor barrier layer.
The coating made of natural stone chips consists of several layers:
- water-repellent layer;
- fiber cement board;
- color chemical composition, which is based on epoxy resin;
- natural stone chips.
Practicality of fiber cement boards
Fiber cement boards are very simple and easy to install, which allows you to reduce the time required for finishing work. Thanks to the light catalyst layer applied to them, they do not require special care. The surface is cleaned of dirt during rain or with water from a hose. Cladding the façade of buildings with such slabs can be carried out in any climatic conditions. Due to the strength of the slabs, they are used not only on walls, but also on the base.
Ventilated facade made of fiber cement boards is a cladding element rectangular shape with decorative trim. Fiber cement consists of 80-90% cement, the rest is water, sand and cellulose fibers (fiber). Cellulose in this material plays the role of reinforcement. Sometimes fiberglass is added to the composition instead.
Due to special way installation, a gap remains between the ventilated facades and the walls of the building, ventilation is constantly carried out, which helps prevent the occurrence of many problems inherent in other types of facades. A layer of thermal insulation is placed in the gap.
Fiber cement slabs and their decorative coating are hardened during the production process to increase strength. On front layer The finished slab is coated with a water-repellent protective layer of polyurethane and acrylic. Paint or other coating is applied to the treated surface. Last layer on the front side there are photoceramic or hydrofilceramic substances that form a film that ensures self-cleaning of the facades. Apply to the back side
Finishing options for fiber cement boards:
- plain painted color panels;
- stone chips to match the colors of natural stones;
- imitation brick wall;
- imitation masonry;
- under wooden siding;
- for decorative plaster;
- mosaic, etc.
Service life of fiber cement facades depending on the method decorative finishing from 20 years old.
Advantages and disadvantages of a ventilated facade made of fiber cement boards
From fiber cement boards:
The disadvantages of fiber cement facades include high degree moisture absorption, despite the use of moisture-repellent impregnations, and the fact that installation cannot be carried out by one person.
Cost of ventilated facade made of fiber cement board
The final cost of fiber cement facades including installation consists of several points:
- Design - from 120 rub. / sq. m.
- Frame with fastenings - from 410 rubles. / sq. m.
- Insulation ( mineral wool) - from 360 rub. / sq. m.
- Fiber cement slab - from 540 rubles. / sq. m.
- Applying markings - from 150 rubles. / sq. m.
- Installation of insulation - from 250 rubles. / sq. m.
- Installation of the frame - from 350 rubles. / sq. m.
- Fastening panels - from 480 rub./sq.m. m.
The total cost of a ventilated facade made of fiber cement boards will be from 1,300 rubles. / sq. m, and together with the project and installation from 2800.
Finishing with fiber cement panels is suitable for different categories of buildings
You can not only decorate a new building, but also insulate an old one during renovation. The slabs can also be used indoors. Partitions are made from them, they are used to decorate the walls of bathrooms and shower rooms, toilets, etc. The material is suitable for finishing residential multi-storey buildings, production and office premises:
- swimming pools;
- health centers;
- car washes;
- high-rise buildings in windy regions;
- multi-storey car parks;
- business and shopping centers;
- other buildings that are subject to increased fire safety requirements.
Fiber cement boards are especially suitable for cladding walls of prefabricated and frame houses.
Installation of fiber cement boards
Fiber cement panels are mounted on a special frame (subsystem). There are three material options for manufacturing the subsystem:
- galvanized steel, coated with primer or powder paint;
- aluminum - optimal choice by price and quality;
- tree - a budget option, requires the use of protective impregnation.
Fiber cement boards are fastened to the subsystem guides using rivets (matching the color of the panels).
Fiber-reinforced concrete facade, do-it-yourself installation:
- Cleaning walls from old finishes, dust and dirt. , then you need to remove excess mortar in the seams. Use a level to check the verticality of the walls.
- Applying markings on the walls for brackets according to a pre-designed diagram. depends on the size of the panels and their weight.
- Installation of plumb lines at a distance from the wall equal to the thickness of the future thermal insulation.
- Installation of brackets using façade anchors. The depth of drilling for the anchor depends on the material of the walls and the weight of the panels. If the walls are made of foam blocks, then it is possible to install brackets on. A special paronite gasket is placed under each bracket.
- Adjustment of the length of the brackets to the thickness of the insulation layer (no more than 60 cm). Special extension cords may be needed.
- Installation of insulation boards according to special technology on mushroom-shaped (disc-shaped) dowels. The bottom layer of insulation boards is secured with three dowels. The top layer is installed so that it overlaps the seams of the bottom layer according to the principle brickwork. It is attached to five anchor mushrooms. This technology significantly improves the thermal insulation characteristics of facades. Slots are made for the brackets.
- Installation of horizontal frame guides. The pitch is no more than 60 cm vertically. Fastening to the brackets is carried out using blind rivets.
- Installation of a vertical profile on top of a horizontal one according to the drawn up diagram. The height sections of the profile are connected by a bus. There should be a small gap between them to compensate thermal expansion metal as the air temperature rises. The frame should be located at some distance from the insulation. Between the slabs and the thermal insulation after installation there should be ventilation gap. EPDM tape is attached to the frame elements. It ensures a tight fit of the plate to the guides.
- Installation to the frame of fire shutoffs, .
- Cutting slabs into panels of the required sizes. First you need to mark the slab. Then it is placed on flat surface, placing it under soft cloth to prevent scratches. The easiest way to cut is to use a circular saw. When cutting, its disk should not protrude below the cut by more than 5 mm. The surface of the cuts is wiped with a dry cloth.
- Drilling holes for rivets in cut panels. Again, markings are applied first. You can only drill one slab at a time. Output holes engineering communications cut with a jigsaw.
- Painting the ends of the prepared slabs.
- Fastening fiber cement panels to the frame with blind rivets.
Decorative strips
When installing some, including fiber cement, between separate elements seams are formed. In this case, finishing with fiber cement panels is complemented by the installation of decorative protective strips for joints. They not only decorate the seams, but also protect them from precipitation. They are attached to the profile during the installation of the slabs.
Protective and decorative strips are made of galvanized steel, powder-coated. You can choose any color - to match the slabs or contrasting combination. The standard length of the product is two or three meters, but it can be manufactured according to customer sizes (up to 6 m). There are special strips for each type of seam (vertical and horizontal), as well as for decorating the corners of the building. When calculating their number, take into account the height of the building, the dimensions of the slabs, the number of corners, window and doorways and etc.
Conclusion
Installation of ventilated facades made of fiber cement boards is simple, affordable way finishing and insulation of buildings. Wide range of options decorative coatings allows you to select suitable panels for every taste. Installation can be carried out by two people independently, even in the absence great experience V construction work. This will significantly reduce costs. If finances allow, then it is wiser for experienced specialists. This guarantees best result, reliable beautiful finish houses outside.
« A private house with a facade made of EKVITON [tective]"
Manufacturing Features
Fiber cement products are produced by specialized enterprises with industrial equipment. All finished goods subject to laboratory control.
Fiber cement panels for facades are manufactured using the most simple and at the same time unique technology. The remaining liquid is expelled from a homogeneous mixture of sand, cement, water and cellulose in precisely controlled proportions, and the resulting dough-like substance is cut into panels of a certain size. Then the blanks of fiber cement facade panels are pressed under a multi-ton press to give additional strength and are sent for hardening in an autoclave or ripened in natural conditions.
Next, the finished panels for facades made of fiber cement material undergo final processing: they are primed, textured or coated with a special matte acrylate composition that is resistant to fading in the sun, depending on the type of panels.
Before being sent for storage, all fiber cement products undergo laboratory control. The final stage of production consists of checking products for compliance with standard requirements and rejecting slabs with deviations.
"Private house with fiber cement panels for exterior finishing houses from EKVITON [tektiva]"
Painted fiber panels have a smooth, uniform matte and monolithic surface without pores or microcracks, characterized by a unique self-cleaning ability. In order to refresh the facade after a long Russian winter and spring thaw, just one good downpour is enough.
“Facade panel made of fiber cement EKVITON [picture] ultra-matte”
“Object covered with façade panel EKVITON [picture] ultra-matte”
Raw materials for the production of fiber panels
The main components for the production of fiber cement are cement, sand, binding materials– water, cellulose fibers. Each of them undergoes pre-treatment, in particular, the cellulose is cleaned and separated into fibers using water. The prepared raw materials enter the workshop.
Mixing cement mortar happens in a standard way: all ingredients are combined and mixed dry. Quartz sand, dispensers, and weight lighteners are added to the composition. Components in standard version The preparation of the solution is stirred for 30 minutes to 1 hour.
Types of fiber cement panels
Fiber cement external facade can be done using EKVITON panels different types:
- Tectiva - the material is colored in the mass and has a pronounced texture. The surface resembles linen, with characteristic fibers and texture. It gives the impression of a specially performed polishing.
- Natura is a natural material that has a subtle but distinct fiber cement structure. The coloring is done in bulk.
- Materia are façade fiber cement panels for exterior finishing of houses. The products have a large format, while they are thin and durable.
- Pictura – the material has a matte finish smooth surface, excellent for the implementation of original architectural objects.
- Linea is a profiled panel that is popular among architects for implementing modern solutions. Depending on the viewing angle, the panel looks different.
Physical and mechanical properties and technical characteristics of fiber cement panels
| Limit deviations sizes of finishing materials, according to: | ||
|---|---|---|
| - length, mm | ± 3 | |
| - width, mm | ± 3 | |
| - thickness,% | ± 10 | |
| Deviation from flatness and edges from straightness, mm, no more | 1 | |
| Deviation from rectangularity (deviation of the sheet shape from rectangular), mm, no more | 1 | |
| Panel density, kg/m3, not less | GOST 8747-88 | 1550 |
| Modulus of elasticity in bending of fiber cement panels, MPa (for reference): | GOST 8747-88 | |
| - along the fibers | 13000 | |
| - across the fibers | 15000 | |
| Bending strength, MPa, not less | GOST 8747-88 | 24 |
| Frost resistance: | GOST 8747-88 | |
| - number of cycles | 150 | |
| - residual strength,%, not less | 90 | |
| Water absorption of materials, %, no more | GOST 8747-88 | 20 |
Application
Fiber cement panel is a practical and aesthetic material for exterior decoration. With the help of such material you can transform appearance structure, give it original and modern look. High technical and aesthetic characteristics ensured wide application fiber cement. The material is used for different purposes:
- for finishing prefabricated structures;
- when installing ventilated facades;
- for the decoration of new houses and during the reconstruction of old ones;
- for residential, industrial and commercial buildings.
The high performance and decorative characteristics of fiber cement boards have made them in demand in the interior and exterior decoration of low-rise residential buildings, office and other buildings and structures. The material is usually used on facades, including in the form of:
- windproof component of the main walls of the building;
- additional heat-insulating layer;
- leveling coating under decorative design surfaces.
Fiber cement panels are in great demand for furnishing new buildings and for the reconstruction of old buildings, and are relevant for finishing frame houses. Their scope of application includes interior work. Fiberboards are often used for internal lining walls of residential premises due to the high environmental friendliness and aesthetics of the material. Fireproof properties have made the panels in demand when decorating stoves and fireplaces.
Houses on the water. Facade panel EQUITONE [nature] / EQUITONE N071 N072 N154 N250 N281 N291 N372 N373 N473 N972,
Architect: Attika Architekten, Bethaniendwarsstraat 6m - 1012CB Amsterdam
The panels are widely used in facade and interior design solutions.
Advantages of fiber cement panels EQUITONE / EKVITON
EQUITONE / EKVITON slabs, produced by Etex, for the installation of fiber cement stylish facades characterized by a number of functional and operational benefits, among which:
- wide range of colors developed jointly with European architects;
- thin and durable material;
- light weight- a fiber cement screen will provide minimal load on the walls of the building. In addition, this feature of the material greatly simplifies the process of transportation, transfer and installation;
- exceptional environmental friendliness (only cement, sand, water and cellulose fibers). The composition does not contain components harmful to humans; when working with the material, you do not have to worry about unwanted fumes and other negative impacts;
- freedom of cutting and perforation, freedom of layout and association with others natural materials, such as stone, glass, metal, brick, etc.
- frost resistance - fiber cement can withstand many freeze-thaw cycles without changing its strength characteristics, therefore the material is widely used in exterior decoration houses in harsh climates;
- versatility - façade fiber cement slabs can be used to cover not only outer part buildings, but also elements of interior design solutions, examples of this in the gallery Our objects
- Possibility of year-round installation in any location climatic zone Russia;
- service life is about 50 years;
- affordable price corresponding to quality.
Pros and cons of modern fiberboards
To the list of advantages already listed, it is necessary to add following features:
- non-flammability - fiber cement slabs are not subject to fire. Moreover, it becomes an obstacle to the spread of fire;
- resistance to ultraviolet radiation. Even after many years of use under the sun, the slabs retain their original appearance;
- high stability to impacts, bending strength is largely due to the inclusion of cellulose and synthetic fibers, which perform the function of a reinforcing lattice;
- the low hygroscopicity of fiber cement finishing is ensured by water repellents that do not allow the slab to absorb moisture either from the inside or from the outside. But at the same time, the material is characterized by satisfactory vapor permeability parameters;
- durability - service life of up to 50 years as a façade finish, depending on operating conditions. For relatively inexpensive material this is quite a decent indicator;
- good thermal insulation, especially in combination with mineral wool insulation. After finishing the walls from the outside, there is a significant reduction in the heat loss of the building and the cost of heating the premises;
- noise insulation - the ability to absorb external noise is comparable to double windows. Increased sound insulation – by-effect composite material structure;
- ease of installation of slabs - working with fiber cement panels is much easier than plastering the facade. If you have the right tools and have access to a source of information, you can install them yourself;
- neutrality to the appearance of mold and the formation of fungal colonies - conditions conducive to the development of microorganisms do not arise on the surface of the cladding;
- resistance to corrosive processes - even operation in high humidity does not make the material less resistant to corrosion;
- self-cleaning ability - rainwater quickly removes layers of dirt from the surface of fiberboards.
Along with undeniable advantages, fiberboards have a number of disadvantages, these include:
- increased level of water absorption. At high humidity and direct contact with precipitation, the level of moisture absorption of the material reaches 10%;
- a new fiber cement product that has not been painted under production conditions requires application paint coating;
- the need to attract an assistant - despite simple technology installation, you won’t be able to do it alone - the products have enough big sizes and have impressive weight;
- Another controversial point that is attributed to the disadvantages of fiber panels is the lack of expressiveness compared to natural stone, decorative bricks and other finishing materials. The statement is controversial, since the market today offers a wide variety of slabs with a wide variety of decor.
Despite the fact that the material is not perfect, fiber cement panels are chosen as professional builders, and individual developers, since increased performance characteristics and the ease of solving most problems compensate for all the shortcomings of the material.
Order required quantity fiber cement panels EQUITONE / EKVITON and other products from this unique material for cladding facades and more, you can always contact us, as a manufacturer for affordable price and with delivery to any region of Russia.
Installation features
The facade can be mounted by attaching fiber cement boards to the wall or to the lathing. Fastening is carried out using special brackets. For relax installation work perform the sheathing frame. When installed at an angle, overlapping the bottom panels, fixation is carried out on the upper side. When joining in length, it is necessary to provide a ventilation gap to compensate for thermal expansion. To mask the joints, strips, corners and additional elements are used.
You can always order the required number of EQUITONE fiber cement panels and other products made from this unique material for facade cladding and more from us at an affordable price and with delivery to any region of Russia.
| 1220x2500 and 1220x3050 | Price, rub./m2 | ||
|---|---|---|---|
| EQUITONE / EKVITON [tective] | |||
| TE10, TE40, TE90 | 8 mm | 2450 rub. | |
| TE15, TE20 | 8 mm | 2730 rub. | |
| TE30 | 8 mm | 2870 rub. | |
| TE00 | 8 mm | 3080 rub. | |
| TE60 | 8 mm | 3080 rub. | |
| EQUITONE / EKVITON [line] | |||
| LT20 | 10 mm | 6370 rub. | |
| LT60 | 10 mm | 6930 rub. | |
| 1250x2500 and 1250x3100 (1280x2530 and 1280x3130 supplied) | |||
| EQUITONE / EKVITON [nature] | |||
| N074, N073, N281, N251, N972, N359, N331 | 8 mm | 3430 rub. | |
| 12 mm | 5390 rub. | ||
| N211, N252, N163, N161,N861, N162, N154, N961, N662, N661, N412, N411 | 8 mm | 3640 rub. | |
| 12 mm | 5810 rub. | ||
| N294, N250, N891, N892, N991, N594, N593 | 8 mm | 3010 rub. | |
| 12 mm | 4550 rub. | ||
| EQUITONE / EKVITON [picture] | |||
| PA041, PG241, PG243, PG742 | 8 mm | 3010 rub. | |
| 12 mm | 4410 rub. | ||
| PG341, PG442, PG443, PG444, PG544, PG545, PG546, PG641, PG642, PG843, PG844, PA944, PA542 | 8 mm | 3010 rub. | |
| 12 mm | 4410 rub. | ||
| PW141, PW841 | 8 mm | 3150 rub. | |
| 12 mm | 5250 rub. | ||
| EQUITONE / EKVITON [matter] | |||
| MA200 | 8 mm | 2730 rub. | |
| 12 mm | 3710 rub. | ||
| MA400 | 8 mm | 3150 rub. | |
| 12 mm | 4550 rub. | ||
The price is negotiable, depending on the volume of delivery.
Additional service from the manufacturer: cutting panels to the specified size
Check the price in the Sales Department
Want to know panel prices? Call!One of modern methods finishing of facades of buildings and structures is the arrangement of ventilated facades. To create them, fiber cement facade panels are used.
Composition of fiber cement panels
Fiber cement facade panels panels are composite material, the main raw material for the production of which is a mixture of cement, mineral and synthetic fillers, as well as cellulose fiber. Some brands of fiber cement panels contain additives such as mica and quartz sand, which increase the strength properties of the finishing material.
Despite the fact that the building materials market offers facade panels of both domestic and foreign production, there are no significant differences between their performance characteristics, since they are produced using identical technological processes.
Production of fiber cement panels
Fiber cement facade panels are produced by pressing and autoclaving of raw materials. In order to obtain high-quality products, the pressure during pressing must be at least 600 -650 N/cm 2, and temperature regime must be strictly observed and vary in the range from 170 to 175 0 C. If strictly observed technological process façade fiber cement panels are obtained that have a uniform, stable structure and uniform density.
The strength of the finishing material is sufficient to withstand significant mechanical loads.
The final stage of production of finishing material is its coloring. Panels can be coated with either smooth or textured paint. Texture paint allows the production of facade panels imitating artificial or natural stone.
In order to further protect the finishing material from exposure external factors, such as ultraviolet radiation and precipitation, a protective layer is applied to fiber cement panels varnish coating. The use of high-quality dyes and varnishes allows you to create inimitable and unique surface textures and colors.
After production finishing panels undergo a testing stage to ensure that the material characteristics comply with the relevant quality standard.
Advantages
The main advantages of fiber cement panels include their high strength, environmental friendliness and durability. In terms of their physical and mechanical properties, fiber cement panels are close to porcelain stoneware panels facade tiles, they are fireproof, which ensures high fire safety of this finishing material.
The low hygroscopic properties of the material allow the use of fiber cement panels even in regions with harsh climatic conditions.
Fiber cement panels are manufactured various shapes and sizes, but all of them are equipped with special ventilation slots that allow air to circulate freely between the panel and the heat-insulating layer.
Fiber cement facade panels are universal finishing material, which can perform not only a decorative, but also a thermal insulation function. Fiber cement panels are used to create partitions inside buildings and structures.
Finishing a building using fiber cement panels is quite simple, since this material does not require pre-installation preparation of surfaces. The key advantage of this finishing material is its high performance characteristics and low cost.
Flaws
This finishing material does not have any significant drawbacks; the only thing that can be noted is its insufficiently aesthetic appearance. The facade of a building finished with fiber cement panels is not as expressive as a facade lined with decorative bricks or stone tiles.
This drawback relates to subjective forms of assessment, since finishing buildings and structures with fiber cement panels can have not only sufficient aesthetic appearance, but also high performance characteristics.
Installation of fiber cement panels
In order to install fiber cement panels, it is necessary to mount brackets on the walls of the structure, and it is worth taking into account the fact that the length of the brackets must be greater than the thickness of the heat-insulating layer. This is done to ensure sufficient air circulation between the thermal insulation layer and the finishing material.
Then the heat-insulating layer is installed, for fastening which dowel-umbrellas are used. A metal frame is mounted on top of the heat-insulating layer.
It is necessary to begin the installation of a metal frame by installing it horizontal elements, after installation of which, vertical elements are mounted. Fiber cement panels are attached to metal frame. Depending on the thickness of the finishing material, fasteners such as self-tapping screws or clip-on clips are used.
Important! The use of self-tapping screws is advisable if the thickness of the fiber cement panels does not exceed 15 mm. If fiber cement panels are fastened using self-tapping screws, then a sealing tape must be laid between the frame and the finishing material.
The joints between fiber cement panels are filled with a sealing mixture. To fill the joints, you should choose a sealing mixture of the same brand as the fiber cement panels themselves.
To decorate the corners of a building they use metal corner or angular-shaped components. To decorate corners, edges of windows and doors, you can use both identical and contrasting components, the latter will allow you to create bright accent and uniqueize the façade design.
For details on installing fiber cement siding, watch the video.
Conclusion! The ease of installation and high performance characteristics of fiber cement panels allow you to finish the façade of a building yourself. To do this, you must strictly follow all technological stages installation