Almost every bathroom in a residential apartment, be it multi-storey building or private sector, equipped with a heated towel rail. This device not only performs its direct functions, but also acts stylish accessory. For comfortable and reliable use of dryers in Russia, devices from domestic manufacturers are more suitable. We’ll look at why below, and also take a look at the 2016 rating.
The better Russian heated towel rails
The conditions in which bathtub dryers are used are very unreliable, and although foreign manufacturers create very original and beautiful models, they are absolutely not ready for such loads. Our manufacturers:
- Cover protective compounds inner surface pipes to protect them from corrosion under the influence of hot water and chemical impurities contained in it.
- They check devices for operability under partial and strong pressure surges that exceed the norm by 2 or even 3 times.
- Special taps are added to the design, with the help of which you can get rid of air jams.
In addition, domestic heated towel rails are much more affordable in price than products from other countries. At the same time, the number of different forms is also surprising. Photos of models can be viewed on the official websites of each manufacturer or on the pages of online stores.
Terminus heated towel rails: one of the most popular offers on the domestic market
Rating of manufacturers from Russia
- Terminus. This company occupies a leading position in the production and sale of heated towel rails. For the manufacture of partings, high-quality material is selected and innovative technology production. The assortment is very large. The catalogs present more than 200 original models, including water ones.
- Sunerja. The first manufacturer to start producing heated towel rails from stainless steel. Only used in production quality materials foreign suppliers. The models are reliable and durable.
- Nika. This manufacturer has already earned trust abroad and has several International quality certificates. Only high-quality materials are used for production. A wide range allows you to choose the right option for any bathroom.
- . They make their heated towel rails only from stainless steel. Additionally, a coating is applied in the form of enamel, brass, chrome or nickel. They have a variety of shapes, which are sometimes very surprising. The products meet all quality standards.
- Trugor. It produces models that fully satisfy the requirements of modern consumers. There are heated towel rails different colors and shades, comfortable and functional forms.
Sunerzha: the first domestic manufacturer to include stainless steel products in its assortment
Appearance and material of manufacture
In order for it to not only look great and fit into the bathroom interior, but also last for a long time, you should pay attention to several details:
- Appearance. Of course, the device should be visually pleasing and fit into the overall composition of the bathroom. You can't go anywhere without this.
- Material. For the manufacture of dryers, it uses different metals and their alloys, which do not always withstand the action of not the cleanest hot water in our pipelines:
- Non-ferrous metals. Quite original models are produced from them. They are inexpensive, some resist corrosion well, but leaks often occur because the thin walls cannot withstand pressure changes.
- Iron. This economical option, but its service life is very short.
- Stainless steel. These models cope well with all difficulties (pressure drops, impurities in hot water). They are much more expensive in price than previous options, but will last a very long time.
Advice. The most suitable option for ordinary apartment- This . You should not spare money, because a more expensive device will last much longer.
Most suitable material For a heated towel rail, stainless steel is rightfully considered
What else should you pay attention to when choosing
The water pressure that the device can withstand. Since the pressure in our water supply systems often fluctuates from minimum to values significantly exceeding the norm, this indicator is very important. Usually all the indicators are indicated in the passport. Foreign models are absolutely not adapted to such loads.
Be sure to know the size of the pipes in central water supply to select the appropriate device. Most homes have pipes that are 2.45 cm or 1 inch in diameter.
Domestic manufacturers completely adapt their models to these sizes, which cannot be said about foreign ones. Most often they produce models with pipe diameters of 0.5 or 0.75 inches.
Seams. If the buyer decides to choose some kind of heated towel rail unusual shape, which cannot be made from a solid pipe, it is necessary to check the quality of the welding seams. The joint must be uniform, without microholes and cracks, smooth and even. If something raises suspicions, it is better to refuse such a purchase.
Attention! There is no need to be afraid of such devices. If all seams are welded well, the heated towel rail will last about 7 years.
When choosing a heated towel rail of an unusual shape, you should pay attention to the presence of welding seams and the quality of their execution
If the remaining option is a rotating model, then you need to check how much weight the elements can support. Most often it is no more than 5 kg. But in addition, such models are not always appropriate in small bathrooms, since there is simply not enough space to rotate all the elements.
For tightness, seals are installed between moving parts. Models from foreign manufacturers fail very quickly, unable to withstand particular loads and strong pressure surges.
When choosing a heated towel rail, you need to pay attention to all the nuances, and not choose only on aesthetic grounds. Only then will the device work for a long time and please the owner.
Video: Domestic heated towel rails
How nice it is to dry yourself with a soft, dry towel. What needs to be done so that the towel does not lose its properties - use special device called a heated towel rail. What kind of device is this, what types of heated towel rails are there, and how to choose the right one, read on. The heated towel rail is heating device, consisting of a circuit of pipes connected to the hot water supply or autonomous, by means of heat transfer it heats the bathroom and dries the towels. For the first time, where heated towel rails appeared, it was Ancient Rome, however, they bore little resemblance to the modern design. They were like a closed brazier, and were heated by coal. Only in the Middle Ages did the heated towel rail begin to acquire modern look, he had grates that were heated by the fire of the stove. In the early 90s, water coils made of non-ferrous metals and stainless steel appeared.
Water heated towel rails are a pipe bent in the form of a coil through which heating water passes; it is directly connected to the heating system.
Water heated towel rails are:
- W, P and M - shaped;
- BiP-2R;
- Sigma-R.
The heated towel rail model BiP-2R is made of stainless steel with a polished surface, which was produced using electron plasma technology.
The modern mirror coating BiP-2R does not fade during use, does not rust or collapse.
BiP-2R is connected to the heating system even at a temperature of 115˚C and a working pressure of 15 atm.
The heated towel rail model Sigma-R is made of stainless steel. It is the easiest to install, as it does not require additional pipe supply. There are 3 types of heated towel rail Sigma-R, this is a heated towel rail with a glossy polymer coating, with plasma polishing, and with titanium nitride coating.
Sh, P and M-shaped heated towel rails are selected individually, as they depend on the requirements of the customer and the manufacturer.
What are the best water heated towel rails according to reviews?
The most important thing in choosing a water heated towel rail is the material from which it is made and the coating applied to the structure.
Reviews revealed the pros and cons of the material:
- Ordinary grease, coated with chrome, is the cheapest, however, during operation it quickly fails and leaks at the junction with the main pipes. Service life is no more than 5 years.
- Stainless steel coated with electrolytic plasma, polymer, chrome or simply painted. Stainless steel lasts on average up to 15 years, and is the most reliable in places with high humidity and high temperature.
- Copper, brass, aluminum heated towel rails are the most durable. Can last up to 25 years.
The latter are the most fragile and may not withstand impact or strong water pressure.
Water heated towel rails have a major disadvantage: they are dependent on heating, which is extremely inconvenient during seasonal maintenance work at thermal power plants.
An alternative to water heated towel rails are electric ones, which are economical to use and operate autonomously from the water supply.
Electric, like water heated towel rails, have a wide variety of configurations, number of sections and can be of different colors.
Popular models:
- PEB-S;
- PEB-TS;
- PEB-U.
These models come with a kit electrical switches with backlight, protected from moisture.
Electric heated towel rails are distinguished by 3 main types of coatings: polymer coating, which is carried out with enamel powder, coating with electrolytic plasma polishing and shiny surface golden color.
Instructions: which heated towel rail to choose for the bathroom
Before purchasing a heated towel rail, you need to decide on the type of connection, the shape of the heated towel rail, the material from which it is made, familiarize yourself with the manufacturers, price and warranty period, the presence of temperature control.
Before you go to the store to choose a heated towel rail, you need to measure all the dimensions in the bathroom - this is the distance from the bathroom, the distance from the door, height and length.
It is necessary to clarify the technical parameters of the water heated towel rail.
It must correspond to the level of operating and pressing pressure of the building’s water supply system and:
- The type of connection of the heated towel rail is very important, since if there is no heating, then it is better to choose an electric one. However, it consumes a lot of electricity - on average from 160 to 200 W.
- If you want to save money and have hot water supply or heating in your house, then it is better to purchase a water heated towel rail.
- The most practical is a combined heated towel rail, which can be powered by water and electricity. The only disadvantage of such a heated towel rail is that it is not so widespread, but is a new product, the price of which can be many times higher than that of an electric or water one.
The shape of the heated towel rail can be different, depending on the customer’s requirements and installation location. If the installation location allows, then it is better to purchase a device in the form of a ladder, since it has more working surfaces, unlike the U-shaped and M-shaped ones. different shapes.
It is necessary to pay attention to the base from which the heated towel rail is made. High-quality copper, steel or galvanized ones can last for more than one year.
When purchasing and installing a heated towel rail, it is better to use one company, since the warranty is not considered due to correct installation. It is better to entrust installation to workers who are familiar with their product.
The best manufacturers of heated towel rails
There are a lot of water heated towel rails, but there are major manufacturers that have a high rating.
Reliable companies are:
- Terminus, country of origin: Russia. Produces heated towel rails of the Aurora series, which are mounted in the system central heating. The heated towel rails are made of food grade stainless steel AISI 304L. The warranty is issued for 10 years from the date of purchase. Terms . All heated towel rails differ in the number of sections. Terminus offers seamless heated towel rails that delight you with price, quality and beauty.
- Nika, country of origin: Russia. Nika produces heated towel rails made of Italian stainless steel AISI304. Warranty from the date of purchase is 5 years. Nick's collection includes heated towel rails from the Trapeziumа, Arcа, Simpleа, Bamboo, Quadro, Classicа, Curve, Mixa Econa series. All series differ in the number of sections, dimensions and center dimensions.
- Margaroli, Italian. Warranty from the date of purchase is 1 year. Heated towel rails from the manufacturer Margaroli are made of high-strength brass and have different color schemes. The Margaroli collection includes the series of heated towel rails Arcobalena, Armonia, Brezza, Classica, Concerta, Luno, Panorama, Serena, Solo, Venta.
- Mstal, country of origin: Russia. Mstal heated towel rails are made of stainless steel, the seams are welded in an inert gas environment - TIG, which increases the service life to 25 years. Warranty from the date of purchase is 5 years. Mstal produces models PM-1, PM-2, PL, Ш-shaped and others, which are selected depending on the dimensions of the room and purpose.
- Zigzag, country of origin: Russia. Zigzag produces heated towel rails made of AISI304 steel, with electroplasma polishing. Warranty from the date of purchase is 36 months. It has more than 10 models from non-welded to complex multi-circuit welded.
- Dikron, country of origin: Russia. The Dikron company produces heated towel rails made of AISI 304 stainless steel, models Classic M, Classic P, Ladder, Foxtrot. The Dikron company offers heated towel rails in different colors and sizes. Warranty depending on model.
- DI kron, made in Russia. Heated towel rails are made of stainless steel and have a large selection of sizes and varieties. However, components must be purchased separately and have a 1-year warranty.
There are also Russian and foreign companies that produce heated towel rails Equation, Leader, Aquastal, Dikron, Flagman. They produce heated towel rails made of copper, steel, and aluminum.
What are the most reliable heated towel rails?
There is no need to say that this or that manufacturer produces the most reliable heated towel rail. The careful operation of heated towel rails and conditions largely depend.
Heated towel rails are designed for drying items made of cotton material that are not dyed and cannot melt or stick. The reliability and durability of a heated towel rail depends on the quality of installation and compliance with safety requirements.
Types of water heated towel rails (video)
Preference should be given to heated towel rails made of stainless steel, since ordinary steel, copper, brass and others do not meet such requirements as corrosion resistance, hardness, and heat resistance.
A heated towel rail helps quickly get rid of excess moisture in the bathroom and dry wet items. New models of “dryers” not only cope well with the shortcomings of the microclimate, but also decorate the interior. However, the attractiveness of the design simply must be combined with functionality, don’t you agree?
We are happy to share useful information on how to choose the best equipment for arranging a bathroom with you. This article presents information collected during the actual preparation for purchasing the device. It addresses all the questions that a buyer might have.
We offer you detailed description characteristics that you need to pay attention to before purchasing. Here is an overview of products from leading manufacturers in the segment. The selection criteria are justified by compelling arguments, the information is confirmed by photos and video recommendations.
The bathroom is the most damp place in the house and apartment, so it is necessary to provide additional heating of the room. Heated towel rail Helps quickly dry towels or linen, prevents mold and prevents dampening of floor and wall finishes.
Besides this, modern models are a stylish decoration for the bathroom interior, as progressive designers are constantly working on the appearance of the devices.
Chrome-plated heated towel rail in the shape of a ladder - ideal option water design with a traditional arrangement of elements, convenient for drying wet things. Installed in a free area on the wall
Water heated towel rail in the standard version it looks like a curved pipe in the middle of which hot water circulates. If the water supply stops circulating, the product will no longer function.
Choosing water heated towel rail, first of all, you need to take into account the pressure level in the pipes. According to current building regulations and GOST requirements, the water pressure in the water intake fittings is more than 6 atm.
When choosing a towel dryer connected to a centralized DHW system or for water heating, you should find out what pressure the device can withstand
Water pressure in pipes apartment buildings can be 2.5-7.5 Atm. The indicator depends on the location of construction, the quality of communications and the number of floors in the building. In private houses it is usually 2-3 Atm. Therefore, before purchasing, you should find out the indicators of the water supply system and add several positions for water hammer to the obtained value.
Water efficiency heated towel rail depends on the development area of the pipe. The original ladder-shaped design has the ability to release the maximum amount of heat and easily withstands water hammer.
When choosing a dryer, you need to pay attention special attention to the diameter of the pipes. In some cases, a special adapter is required for installation and connection of a heating device.
The larger the total area of the pipes from which the water heated towel rail is made, the greater its heat transfer. If you are not satisfied with devices made from thick pipes, it is better to take a device with thin but frequently spaced elements
Basic criteria for choosing a water model
Bathroom renovation involves replacing outdated plumbing equipment, including heated towel rail connected to the hot water supply (DHW) or heating system. When choosing a heating device, you should evaluate not only the external attractiveness of the product, but also the strength of the material.
Not every model heated towel rail able to withstand regular changes in operating pressure that occur in the heating system centralized system apartment buildings.
It is worth considering that peak pressure values in pipes can reach 10 Atm. Therefore, it is important to know which technical specifications and the features of the heating device must be paid attention first.
The correct one is important. In most cases, the installation of the structure is carried out before finishing work begins in the bathroom.
This significantly saves money and time spent on installation work. Many installation problems are easier to solve using modern electric models.
In most cases, water dryers are installed in bathrooms with a connection to the heating pipeline or to the hot water supply system
Appearance heated towel rails
By shape heated towel rails water type can be divided into several different types. Standard models include heating devices that look like a curved pipe. Outwardly, they may resemble the letter “P” or “M”.
IN recent years Modern models of heating structures of unusual sizes and shapes are gaining popularity. For registration modern interiors consumers more often consider progressive design models, for example, in the form of a zigzag or ladder, presented by manufacturers in different modifications.
Heated towel rails in the shape of the letter “M” and “P” are characterized by heat transfer of up to 500 W. Laconic models are useful in bathtubs with limited space
Modernized models are available to consumers, which may have additional functionality such as shelves. Gaining popularity today designer views dryers, which may have original shapes. In this case practical device It will become a stylish decoration for the bathroom, add a bright and unique touch to the interior or emphasize a certain style.
A modernized heated towel rail in the form of a ladder will not only fulfill its direct functions, but will also stylishly decorate the bathroom
Thus, the modern market offers a large selection of water models heated towel rails various forms:
- ladder;
- zigzag;
- U-shaped;
- M-shaped;
- U-shaped;
- teardrop-shaped;
- double-circuit.
Except standard models water heaters for the bathroom, consumers are offered exclusive designer models. They feature an intricate, unique design.
Improved thermal appliances- the best option for modern design. The wave-shaped heated towel rail is ideal for a modern bathroom interior
Shelves or special hooks are sometimes added to designs of the original shape. External attractiveness and practicality are reflected in the cost heated towel rail.
Priority material of manufacture
When choosing a water-type heating device, you should focus not only on the technical characteristics and shape of the product. It is also important what material it is made from. During the production process of water heated towel rails The following materials are used:
- stainless steel;
- black steel;
- non-ferrous metals (brass, copper, aluminum).
There are chromed, polished and painted water heated towel rails. If the owner of a house or apartment decides to change the heating device in the bathroom, he is interested in what material is best to choose a heating device for drying towels and linen.
To do right choice, let's analyze the features and characteristics of water structures made of different materials.
Devices made from ordinary made of steel. Steel is an alloy of iron with carbon and other elements. The technical characteristics and properties of steel depend on additional components.
Reliable heated towel rails made of durable black steel are practically no different from structures made of ordinary stainless steel. Steel radiators They conduct heat well and are coated on the outside with a special layer that protects it from corrosion.
Water heating devices made from iron are considered the most budget-friendly option and are ideal for consumers who want to save money. The disadvantage of models of this type is the relatively short service life of the product.
If you do not have a significant amount of funds when carrying out repairs, then an iron unit is the best option.
Heated towel rails made of steel with a protective and decorative powder coating are in high demand due to the low cost of the products and universal design, suitable for bathrooms of various styles
Heated towel rail made of iron and its alloys suitable for country houses, which have an autonomous heating system. The fact is that in an apartment, a radiator made of this material rusts faster and becomes clogged with impurities and salts that settle daily on the inner walls of the pipe.
This significantly reduces the life of the device, so experts do not recommend steel for a centralized heating system.
Heated towel rails made of stainless steel. Bathroom heating devices made of stainless steel are reliable units that will serve the owner for a long time.
To the main advantages heated towel rails stainless steel can be attributed to their ability to withstand high pressure and resistance to corrosion. Stainless steel models have excellent thermal conductivity.
The disadvantages of such heated towel rails can be attributed to the high cost of products. They are several times more expensive than steel and copper structures. On modern market you can meet budget analogue radiator - heated towel rail, painted to resemble stainless steel.
The disadvantage of the product is that if the operating rules are violated, it quickly loses its attractive appearance.
Stainless steel water heaters for drying towels and linen are more expensive than conventional steel alloy products, but they will last much longer
Regardless of the quality of the water, a stainless steel water radiator will last for a long time. There are chrome-plated, polished and painted water heated towel rails made of stainless steel. To ensure that a steel radiator will delight you with its attractive appearance for a long time, choose chrome-plated models from a domestic or imported manufacturer.
Brass and copper devices.Heated towel rails, made from brass pipes, are the “golden mean” between two types of steel radiators.
The material has an attractive golden color, which is given to it by its constituent components. Brass includes an alloy of copper and zinc, often with additions of iron, aluminum, tin and other elements. This is the most common copper alloy, characterized by ductility.
The service life of an aesthetic heated towel rail made of brass or copper is 5-10 years, but with gentle use it increases noticeably
Mermen heated towel rails made of brass or copper are not susceptible to corrosion, and are slightly more expensive than similar products made of stainless steel.
The maximum permissible pressure that a similar brass or copper radiator can withstand is 6 Bar. Due to this feature, they are excellent for installation in private houses, in which the water pressure usually does not exceed 3-4 atmospheres.
Device mounting method
An important point that you need to pay attention to when choosing a water radiator for your bathroom is the method of fastening or installation. Although installation is not a very difficult task, it does require the involvement of a professional for proper installation. A qualified specialist will not only competently install the unit, but will also maintain the manufacturer’s warranty.
All types of water heated towel rails are connected to risers, since they need to be connected to the existing water supply or heating system. They are most often fixed on the wall, less often on the wall along with the floor. The installation option depends on the specifics of the model and the preferred installation option.
Image gallery
#1: Installation of wall models
When choosing between mounting on the floor or wall, residents of apartment buildings often prefer wall mounting. This is an ideal option for rooms with limited space.
Wall-mounted heated towel rails are relevant for small bathrooms, where a lot of furniture and appliances are usually located on the floor
In a small bathroom, a similar design can take the place of a towel holder. If the lower part of the wall is tiled in the bathroom, you can install heated towel rail below or above the boundary, or buy a device that can be mounted on a bathroom wall with a level difference.
#2: Installing floor-standing appliances
Floor mounted near the wall heated towel rail can perform the functions of additional heating of the room and non-contact drying. For example, you can place a bath towel rack above the water radiator.
At the same time, rising from the water device warm air will dry the wet towel. The bathtub will look more attractive than with things hanging on its walls.
The floor heated towel rail is an original device custom design which will decorate a bathroom in a classic, retro or modern style
Disadvantages of floor heated towel rail: it is not suitable for a small bathroom and requires additional renovation work.
Connection options for dryers
Choosing water heated towel rail, it is necessary to take into account the method of connecting the structure. There are 3 main connection types:
- Lateral. Suitable for vertically elongated devices. This is the most universal method, suitable for standard snakes, systems with recessed pipes and for individual ladder models.
- Bottom connection. Requires Mayevsky taps and normal hot water pressure. Suitable for large models, often used in ladders.
- Diagonal. This connection method ensures efficient water circulation and requires additional pipe laying. Suitable for large structures, stairs and their modifications.
One of the most popular types is a heating device with a side connection. Such models are in demand due to the features of the device and the ease of connecting the unit to the water supply network. When purchasing a side heated towel rail It must be taken into account that some models are not suitable for standard domestic systems.
The model with a side connection is distinguished by its aesthetics due to the hidden communication system. The coolant pipe is hidden in the wall
The generally accepted diameter of risers is apartment buildings- 1 or 1.4 inches. According to foreign standards, the connecting dimensions are 3/4 or 1.5 inches. If you purchased heated towel rail With such dimensions, you must additionally purchase a special adapter with which you can perform installation work.
Design and size heated towel rails
For a bathroom of any style, you can choose a water heated towel rail, which will harmoniously fit into the surrounding interior. Large selection devices allows you to choose the appropriate product option for classic, ultra-modern and other style trends.
A significant role when choosing an attention-grabbing device for drying towels is given to the outer coating of the product. Many modern manufacturers prefer to use water coating for coating. heated towel rail Popular materials today are chrome and polished brass.
If desired, to create exclusive interior you can select radiator models design design with the effect of aged gold, bronze, matte nickel and others. The main condition is that the chosen one heated towel rail matched the style of the bathroom.
A heated towel rail made in retro style will become an accent element of the interior. Copper and brass go well with natural materials: wood, stone, brick
Water radiators for drying may include additional elements. These are shelves for storing bath accessories, hooks for linen and bathrobes, etc. Decide in advance whether there is a need for such additions, since each additional function increases final cost devices.
You need to pay attention not only to the design of the heating device, but also to the size of the product. It is important how many towels can be dried on the radiator at the same time and whether the bulky design will not spoil the aesthetics of the room.
Heated towel rail large size(with a large total length of tubes, long or wide) additionally performs the function of effective heating of the room
It should be noted that heated towel rails with a large surface area, laundry and towels heat up and dry faster. If your plans are not only to dry towels, but also to heat the bathroom, pay attention to larger radiator designs.
Additional equipment functions
Modern - energy efficient devices that are beneficial to always leave on. This is due to the fact that heating an initially cold radiator will require a temperature significantly higher than that required to maintain the heat of an already heated device.
Manufacturers, taking into account the wishes of all consumers, have developed models of drying devices equipped with shut-off switches and timers. Progressive models allow you to achieve the set temperature without outside intervention
The presence of a timer allows you to set a program for turning on the water heated towel rail before taking a shower or bath. This will keep the towel warm when you need it.
Switches and timers can be built-in or act as a convenient separate option. Some models are equipped with a thermostat to maintain the required temperature of the device according to your wishes.
You will learn about the rules and diagrams for connecting an electrical “dryer” by reading our website.
Manufacturer choice: domestic or imported?
Radiators are in great demand in the modern market as heated towel rails domestic manufacturers and foreign analogues. From imported models Italian, German and Finnish brands deserve special attention.
Consumers are offered a variety of models of heating devices, from traditional budget units to non-standard premium devices
You should take into account the fact that products from European manufacturers are mainly designed for connecting a radiator to a heating system. Products from domestic manufacturers are usually focused on connecting the structure to a centralized hot water supply system.
European manufacturers do not take into account the quality of the circulating fluid drainpipes water and use thin-walled steel as the material. However, the internal walls of the radiator usually do not have an anti-corrosion coating.
For hot water supply, water is used, which contains mechanical suspensions, salts and chemical impurities. These elements contribute to corrosion, and suspensions settle on the walls of the device, reducing the internal diameter of the pipe. This especially negatively affects the bends of the product.
The water coming from the water supply does not contain oxygen, and the coolant from the boiler is enriched with it, which is why many people choose heated towel rails domestic production, which are adapted to the conditions of our communications.
Water heated towel rail of domestic production Sunerzha Epatage - high quality for affordable price. Pressure - up to 25 atmospheres, cost - 12,500 rubles
Low quality metal is sensitive to various impurities and quickly loses its performance properties and becomes unusable. To insure against low-quality products, you must give preference to proven and reliable manufacturers.
In addition to well-known world brands, companies with budget options heated towel rails who strictly monitor the quality of their products.
Important characteristics of water modifications
If you want to buy the most economical and relatively inexpensive model, it is better to opt for standard M-shaped or U-shaped products. They are great for decorating a small bathroom.
To install such a water structure, you do not need to install or change pipes. To dry towels, just connect it to the pipeline.
In order to dry a significant amount of towels and linen, as well as to heat the room, choose models with fairly wide pipes. It is desirable that they be made of anti-corrosion and wear-resistant stainless steel.
At the time of purchase heated towel rail be sure to check. Models that look similar in appearance to a regular radiator can be connected exclusively to the heating system.
When choosing the optimal water model heated towel rail it is worth paying special attention to ensuring that it does not succumb to corrosion, can withstand sudden changes in pressure and various kinds water hammer.
Before paying for the selected product, carefully inspect it for dents, chips in the coating, if any, scratches. Explore quality welds and connections
If you have no idea about the installation features of these products, it is recommended to use the services of professionals. This will save you from having to carry out repeated repairs in case of unsuccessful installation of the structure.
To purchase a high-quality and durable water heated towel rail, pay attention to the coating of the product, the execution of the welds and the threads at the ends. It wouldn’t hurt to check the availability of appropriate certificates for the products you purchase. In addition to the warranty card, the kit must contain a hygiene card with the name of the manufacturer.
Conclusions and useful video on the topic
The video will clearly introduce the main aspects of the choice:
We tried to give you general ideas about mermen heated towel rails, which will help in choosing the optimal model. Taking into account the material of manufacture, the degree of resistance of the product to corrosion processes, technical characteristics and features of the devices, you will be able to choose the optimal model heated towel rail.
Would you like to tell us how you chose a heated towel rail for your own bathroom? If you have any questions while reading this article, would you like to let us know? interesting information? Please leave comments in the block below.
To reduce humidity in the bathroom and be able to dry wet towels, install a special device called a heated towel rail. The most common type of such plumbing is a water heated towel rail, which is connected either to a hot water supply or to heating system. What characteristics does this plumbing device have, what materials is it made from and how not to make a mistake when choosing suitable option for your bathroom?
Pros
- This device keeps the room dry for a long time and also heats the bathroom. This helps protect the room from the formation of fungi and mold due to high humidity.
- Unlike electric models does not depend on power supply and is more economical (no need to pay for additional electricity consumed), and also does not require grounding and special moisture-resistant sockets.
- In addition, using the hydronic type of heated towel rails is safer since there is no risk of electric shock.
Cons
- The device will not work if the hot water supply is interrupted (in case of an accident or planned outages) or the heating season ends.
- Installing a water heated towel rail is quite complicated, so to carry out the work yourself you need to have experience and special knowledge.
Species
A heated towel rail purchased for a bathroom may belong to one of the following types of these plumbing devices:
- To electric ones. These heated towel rails operate on electricity, so when installing them you have to pay more for electricity bills.
- To the mermen. Their work is based on the circulation of hot water inside the device.
- To the combined ones. They are quite expensive, but combine all the advantages of the first two types. The main advantage of the combined device is the operation all year round- V winter period from heating, and in summer from electricity.
Depending on the type of connection, a water heated towel rail can be bottom or side. The bottom option is more common, but when installing the side one, you can easily hide communications, which affects the appearance of the room.
Forms
A water heated towel rail can be:
- Standard - M-, P- or MP-shaped.
- Ladder-shaped.
- Ring-shaped.
- Zigzag-like.
- With shelves.
- Individual shape.
Materials
The following materials are used for the manufacture of water heated towel rails:
- Stainless steel.
- Galvanized steel.
- Black steel.
- Brass.
- Aluminum.
- Copper.
Models made of galvanized or black steel attract with safety of operation, ease of installation, and good technical characteristics. Copper and brass products are inexpensive and attractive in appearance, but do not last very long (up to 6 years).
Is stainless steel a worthy choice?
Stainless steel products can be called one of the most durable. They are characterized by high strength, corrosion resistance, and long service life. This steel heated towel rail can last 20 years or longer.
What characteristics should you pay attention to?
One of the common mistakes made by heated towel rail buyers is choosing a device based on its appearance. First of all, it is important to take into account the features of using such plumbing equipment, and only final stage choice - whether the product will fit into the interior.
When buying a water heated towel rail, you need:
- Make sure that a passport is provided for the product, as well as a warranty card.
- Carefully inspect the pipe. First make sure it is solid. If you will be connecting a heated towel rail to the heating system and live in high-rise building, the water pressure in the pipes will be high and if there is a seam on the pipe, there is a high probability that it will come apart. Next, find out what material the pipe covering is made of. It can be chrome-plated or enameled, with the first option being more reliable.
- Make sure that the device has an air bleed valve. If it is missing, air may enter the heated towel rail, as a result of which its operation will be difficult.
- Consider the installation details in your bathroom. For example, by connecting a heated towel rail to the heating system, you will make such plumbing useless in summer period. If you connect the device to hot water, the temperature of the heated towel rail will be determined by the water draw-off capacity. If you choose a heating connection, it is important to take into account the pressure in the system. With centralized heating, pressure drops occur very often, but with autonomous heating they do not happen, since the pressure will be constant.
- Select the shape of the product taking into account the characteristics of the house in which it will be installed. For multi-storey buildings It is advised to choose a coil so that when heated, the product does not deform or collapse.
- Check whether the diameter of the selected heated towel rail will fit the pipes in the bathroom. If differences in diameter are found (and this often occurs when purchasing a foreign-made model), you should additionally purchase an adapter.
Review of manufacturers
You can purchase a heated towel rail from the following manufacturers:
- Sunerja. This Russian company offers 15 models of this plumbing device of various shapes. Among them there are those connected to the water supply and to the heating system. They can be installed both vertically and diagonally.
- AquaSteel. Products from this domestic manufacturer attract modern design and many positive feedback from buyers.
- Energy. Products of this Russian manufacturer differs in different design solutions (there are 17 models on sale), high quality, guaranteed for 5 years. The products are made of stainless steel.
- Margaroli. Heated towel rails from this Italian company are durable and reliable, have a quality certificate, and are presented in wide range(more than 20 models), functional and easy to use. They are easy to install and have original look, are connected to the heating system.
- Dvin. Products from this Russian manufacturer are made of carbon or stainless steel. They are economical to use, come in a variety of shapes, and additionally have an enameled, brass, chrome-plated or nickel-plated coating.
- Nika. The company produces stainless steel plumbing fixtures and is one of the leaders in this industry.
In the post-Soviet space, there was no need to choose a drying device: in most cases there was only one metal version letter "G". But today everything is completely different.
When choosing a water heated towel rail for your bathroom, you should take into account the strength and frequency of pressure drops in the heating system, which changes so often. You should take into account the highest indicator, which can reach 10 atmospheres, which is typical for apartment buildings.
Water heated towel rail - stylish decoration your bathroom.
The main role when choosing a water heated towel rail is played by its technical characteristics. Study the parameters of the drying device well, and also look at consumer reviews.
Among the technical indicators, pay attention to the installation method: it is important even at the beginning finishing works indoors. Knowing the installation process in advance will save you time and money.
Remember, a heated towel rail is not just a curved pipe with hot water, today it is an important appliance for drying clothes, adding aesthetics and comfort to your home. It is better to be extremely careful in choosing it, without being tempted by the first beautiful and cheap model.
Water heated towel rail - what is it?
A heated towel rail is a device for drying clothes, presented in the form of a curved pipe; often installed in the bathroom. It should be noted that the operating principle of different heated towel rails may differ: the device can operate on electricity, using central heating (that is, the device is filled with hot water) or using a combination of the two methods.
Water devices are initially included in the bathroom equipment: a metal coil is attached to the wall, through which hot water passes. The heated towel rail serves not only for drying towels and linen, but also for heating the bathroom, preventing the occurrence of mold and mildew.
The disadvantage of such a device is its dependence on the availability of hot water and a long heating time. However, this disadvantage has an advantage: the device heats up slowly, but it also retains heat in the pipes for a long time.
A heated towel rail will not spoil the design of the bathroom at all.
What materials are the towel dryers made from?
Previously, home drying devices were absolutely identical: the material and shape were the same. Today, a heated towel rail can be purchased separately and the choice of material is yours.
Materials for making a heated towel rail:
- stainless steel;
- black steel;
- non-ferrous metals: copper, brass, aluminum.
Stainless steel suits almost any room. The outside of the drying device is polished, painted or chrome-plated.
Chrome-plated models are more durable; painted devices have a shorter shelf life, although they look attractive.
Black steel stands out against the background of stainless steel, as the inside of the heated towel rail is covered special means, protecting the device from corrosion. Due to this, the service life increases.
WITH outside black steel is almost no different from a regular stainless model.
Non-ferrous metals serve more as decoration in the bathroom than as a practical addition. Unfortunately, heated towel rails made of copper or brass will not serve you for a significant period of time, although they have good heat dissipation.
To choose a high-quality and durable device, you should carefully consider the choice of material. This will be the key to long-lasting work.
Choosing a heated towel rail: what should you pay special attention to?
Reliable heated towel rail made of stainless steel.
Which device is better to choose is not a rhetorical question, but a specific one. Choose best device You can easily, the main thing is to pay special attention and not buy the first beautiful heated towel rail you come across.
It is very important to take into account the pressure in the pipes when purchasing, so find out in advance the pressure in the water supply system at home, add a few items and choose a drying device.
All technical indicators you can find out about the water device from the device passport.
Often the reason for poor-quality and short-lived operation of the device is corrosion in the pipes, which appears due to oxygen getting into the water. Therefore, you should choose a heated towel rail with a protective inner coating.
Pay attention to the shape of the device. The heated towel rail is mainly made in two forms: in the form of a ladder or a coil. Reviews note that the shape of the ladder is more practical to use: it accommodates more linen and allows you to dry things along the length.
But with all the advantages, the coil remains the top seller, why? The coil shape is more accessible and easier to install. After all, for the ladder it is necessary to redo the riser, which leads to unwanted expenses.
The classic “M” and “P” shapes are still produced, however, and they are equipped with convex slats.
Heated towel rail dimensions. You should choose the size based on the space you have allocated for drying. If the classic sizes do not suit you, a towel dryer can be ordered separately.
The height of the “ladder” varies in the range of 400–1200 mm, the width is the distance in the center.
The width of the “coil” ranges from 400–1000 mm, the height is the distance between the centers.
Heated towel rail "Snake".
When choosing a size, do not rely on the principle “whatever fits, we’ll buy it.” A water heated towel rail should fit harmoniously into the design of the bathroom without cluttering it up.
Pay attention to the material from which the device is made.
Black steel is short-lived and rusts quickly; the device is made from a thin pipe.
A stainless steel water fixture is more practical. But it is difficult to replace, especially on your own. They are not particularly aesthetically pleasing; the surface of the device is polished.
Models M and U shape are durable and practical, service life reaches 10 years. The “ladder” shape is also popular, thanks to the stainless steel it has a long shelf life.
Water heated towel rails made of copper are considered quite practical, but expensive. Brass is also popular as a material for the manufacture of drying devices. The service life reaches 10 years, however, due to solid precipitation falling from impurities in the water, the diameter of the pipe decreases, which can shorten the operating time of the device.
The heat transfer of non-ferrous materials is low, and it can be cool in the bathroom.
When purchasing a drying device made of non-ferrous metals, make sure that inner side coated with anti-corrosion agent.
Stainless steel drying devices are often counterfeited, so buy the device only from a specialized store and ask for the appropriate documents.
Heated towel rail color. Modern production devices for drying towels are not limited to classic white or “chrome”.
Now you can purchase a heated towel rail in matte, glossy or any color that suits your bathroom interior. However, color models are produced in rather limited quantities, so you need to order individually.
Pipe diameter. Pay attention to the ratio of heated towel rail pipes and central heating. The diameter must match, otherwise you will need an adapter.
Fastening. Ask your consultant and read the device data sheet to see if fasteners are included in the kit. If not, purchase separately, taking into account the characteristics of the device.
Manufacturer. Often the price of a heated towel rail corresponds to the manufacturer’s rating.
Most trusted Finnish manufacturers: Drying devices are of high quality and have a long service life.
Original heated towel rail.
Manufacturers from Germany and other countries are also trusted European countries. Drying devices are distinguished by a rotating mechanism. This feature should be taken into account when choosing a location for installation.
When choosing an imported heated towel rail, remember that our domestic mechanism is not always suitable for imported appliances.
Unfortunately, domestic models are less practical and durable than imported ones. What affects more affordable price. European manufacturers offer models that are practical, functional and attractive, which is reflected in the cost.
When wondering which heated towel rail is best, it is difficult to say the name and number. You must choose a device according to your budget, bathroom capabilities and household requirements.