The Smart Home lighting system is an automated computer network that responds to various actions person, environment and capable of switching between operating modes, changing the parameters of gadgets associated with it. As for the latter, then we're talking about about wall, ceiling and spotlights, emergency lighting, garden lights, neon and LED lights.

The term "Smart Home"

“Smart home” is the coming future. A comprehensive system capable of independently monitoring all engineering devices in a building. The modular structure will allow you to quickly make changes and expand the functionality base. Light control is one of the modules of the Smart Home system. In addition to this, these include tracking, security, and climate control devices.

No matter how perfect the lighting control is (a set of sensors, detectors and controllers), only with centralized control does it become part of the “ smart home" The system includes a specific electrical wiring and devices for automated operation. Each module is closely related to the others.

Application of "smart lighting"

Smart lighting equipment is designed to control indoor and outdoor lighting fixtures. Every lamp in the house, garden lights, spotlights and various lighting are connected here. Also, a centralized device regulates the operation of all devices.

Controllers are used to connect to the network, and sensors and detectors are used to record activities. For example, the sensor registers any changes in lighting - the onset of evening and night, and depending on how dark it is outside the window, turns on the lamps with a certain brightness level. Last operation It is not the sensor itself that performs this, but the controller. The sensor sends a signal to it, the controller processes it and decides what to turn on and where.

Advantages of a smart home lighting system

After global configuration, all that remains is to enjoy its functionality. The user sets the conditions depending on which the intensity changes luminous flux, certain lights turn on and off. These include weather conditions, day and night cycle (light level outside the window).

Separate touchpad has several programs for different scenarios. You can name these programs yourself, for example, “Evening dinner”, “Watching a movie”, “Sleep”.

Energy management

In addition to the convenience of settings and carefree management electrical appliances in the house, using such a module, you significantly reduce consumption electrical energy. Motion sensors will allow you to turn off the lighting in a room if a person has left it, or when the first rays of the sun appear, open the blinds and turn off the lighting fixtures.

The list of smart lighting options is endless. Let's list just some of them:

• turning off power to sockets;
• load distribution throughout the house;
• automatic switching on or off of household appliances;
• transition to backup power sources (if necessary);
• access control to the network and devices.

Safety

It is possible to program a system that allows you to remotely control the electrical network, appliances and lamps. This is required in cases where it is necessary to create the effect of the presence of people in the house. Thanks to this, ill-wishers will not encroach on your home while you and your family are at the resort.

Smart lighting functionality

Turn on or off lighting fixtures directly depends on the change of day and night, the presence of people in a certain room. Various scenarios are responsible for the operating modes of electrical equipment - at night, spotlights (wall sconces and bedside lamps) can work without central lighting, in the evening - general lighting(chandeliers, LED lamps mounted in the ceiling), and during the day all this is disconnected from the power supply.

Most systems have the ability to control the operation of a home theater or lighting.

Despite the variety of designs and availability large number electronic components, lighting system application " smart home» is as simple as turning on or off a regular light bulb.

The logic component is designed and incorporated into the software interface during development. By changing parameters on a small display or remote control, you control all the lights in the house. A clear and simple interface will allow even elderly people or children to use the device.

The automatic light control system consists of the following components:

• a motion sensor that turns on the light only when there is a person in the room, and turns it off when there is no person;
• dimmer - smooth adjustment of illumination;
• blinds, cornices with electric drive- used to find a balance between natural and artificial lighting;
• electrical appliances - various household appliances can be connected to the system, which can function both with and without it;
• system equipment - various modules, control panels, remote control.

Important! “Smart lighting” is closely connected with other utility networks of the house, which allows even more savings on electrical energy consumption.

Automatic light control

There are two ready-made solutions for automating lighting control in a residential building or apartment. The first method involves using separate remote controls for each room. Numerous buttons are associated with specific lighting fixtures - night lights, chandeliers, sconces, etc.

This allows a person to control the light from any part of the house - lying on the sofa, sitting in a chair. When, while reading a book, the need arises to increase the brightness of a floor lamp located in close proximity, just press the corresponding button on the remote control.

The second method sets up full automation of the process, which requires the installation of special sensors. These could be motion sensors that turn on the light when a person appears and turn it off a few minutes after he leaves the room.

On the other hand, the user has the opportunity to turn off the light and be in the room without it - to do this, he will have to click on the switch manually.

Turning lights on or off using a timer

Using the system, automatic control of lighting devices is configured using a timer. Software will allow you to turn the light on or off, change the brightness depending on the time of day. Towards the evening the main lamps are turned on, and towards night - night lights and sconces with reduced brightness.

Great option for country houses. It is possible to configure whether to turn on or off the lights in the yard.

Changing the brightness of the lighting

There are three main ways to control the brightness of lighting fixtures in your home through a smart lighting system. The first method involves using a remote control, the second - a special panel on the wall, the third - automatically changing the brightness after a specified period of time (previous section).

Dependence on time of day

This approach involves the use of separate sensors that record changes in room illumination throughout the day. This is very convenient option, because, unlike timer control of lighting, it allows you to increase the brightness of the light on a cloudy day when the room is really dark.

The method is often used in country (private) houses with winter gardens or greenhouses. Lamps are placed above plants that love light, after which they are adjusted automatic system"smart lighting"

Creating Light Scenes

Light scenes are additional function automatic light control, which allows you to remember combinations of several switched on lamps and repeat them at the press of one button. A convenient and effective option, suitable for private houses and apartments.

Outdoor automatic lighting

For recent years There are fewer and fewer country houses left without automatic lighting systems for outdoor equipment. Special sensors regulate the operation of outdoor lamps, registering changes in street light. Electrical devices turn on at dusk. The darker it is outside, the brighter it is artificial lighting. Night mode is possible, when devices are turned on only in the presence of people.

You should use automatic lighting control as part of a “smart home” system in cases where you are pursuing one or more (of the following) goals: ease of use of lighting devices, saving electrical energy and protection real estate from intruders by simulating presence. Despite the high cost of installation, it quickly pays for itself.

An automated lighting system is a computerized network that, like a “smart home,” is capable of responding to various external events and changing the operating mode of devices connected to it. The latter are groups of wall or ceiling lamps, emergency lighting lamps or garden lanterns - that is, any lighting fixtures.

They connect to the network using special controllers. Various sensors and detectors are responsible for recording “events”. So, the light sensor registers a decrease in the level of illumination - it has become dark outside the window, twilight has deepened.

A corresponding signal is received from the device, processed, then the control command is transmitted to the desired controller, which includes one or another group of lighting fixtures.

SMART LIGHT OPPORTUNITIES

Firstly, turning the light on and off depending on the level of illumination in the house and on the street using a light sensor) and on the presence of people in the room (the presence sensor is triggered).

Secondly, choosing one of several lighting options in accordance with a given scenario. For example, at night, the overhead light turns off, the backlight, night light, etc. turn on. Another option is when the home theater is operating, the brightness of all turned on lamps gradually decreases until they turn off completely.

The hallmark of a “smart home” is the lighting control system, which, thanks to modern technologies can be fully automated. Just imagine how convenient and, of course, impressive it is when the light turns on by itself!

How to set up a system for automatically turning on/off lights?

Thirdly, adjusting the light level depending on the scenario.

Fourthly, imitation of the presence of people in the house. Automation turns on and off different groups lighting fixtures so that from the outside it seems as if there is someone in the house.

MANY HOMEOWNERS NEED AN INTELLIGENT LIGHTING SYSTEM TO PROVIDE A VARIETY OF REMOTE LIGHT CONTROL CAPABILITIES

Let's start designing

If you are going to install a fully automated lighting system, then large-scale transformations must be preceded by careful planning. Conduct an inspection of the house, count the number of lighting groups, determine their purpose. Depending on the volume and complexity of the problems, you should choose a method for solving them.

For example, you counted six lighting groups - two rooms, a kitchen, a bathroom, a corridor and a garden (outdoor lighting). In the garden the light comes on at dusk, in the house - in the dark and when there are people in the room, in the corridor - only during movement and only for a short time.

In addition, in order to remotely control the light from a smartphone, it is necessary to provide traditional switches in each room. If your requirements are not too complex, then perhaps the project can be implemented using ready-made solution on automation of apartments and cottages (a kind of “smart home” in one box). Similar products are offered by large manufacturers of electrical installation and electrical products, as well as developers of software equipment for the “smart home” (for example, HDL, Insyte, Jung, Legrand, WAGO).

Ready-made solutions have a number of advantages. Thus, the individual components of the system almost always correspond to each other. Do we assemble the final diagram from the elements of the system? home automation MyHome (Legrand), Smart Visu Server (Jung) or choose a ready-made “smart home” in one box from Insyte - we operate within the framework of “one designer”. Of course, not everything can be integrated within a single system; moreover, to solve complex problems when it is necessary to combine lighting, heating, security, multiroom and air conditioning projects into one scheme, it is worth using the services of professional designers who deal with smart home installations. When choosing specialists, you should focus on the portfolio, which allows you to get an idea of ​​their work experience.

What is the cost of the system intelligent lighting? The price of finished projects largely depends on the cost of the components. As practice shows, inexpensive option A “smart home” for an apartment or small cottage will cost from 100-150 thousand rubles. up to several hundred thousand rubles.

WHICH PROTOCOL IS BETTER?

System components exchange information and commands using a specific code - the data transfer protocol. The LonWorfcs, LanDrive, KNX, DALI, MyHome, HDL Buspro protocols are widely used. Some, say LonWorks or KNX, provide primarily wired data transmission, although other options for exchanging information are also possible. Others, such as ZigBee, EnOcean, are designed for technology wireless communication via radio channel. The DALI protocol is adapted for lighting control, unlike others, which are considered universal, and can be integrated into higher levels of automation.

EXPERT OPINION

As a rule, not only lamps are controlled using the DALI protocol. It makes it easier to dim lighting and group lamps. For example, you want to divide one lighting group into two, which is difficult in KNX or with conventional wiring, since you need to lay additional cables (wires from each group go to the cabinet). And with the DALI bus it is enough to reprogram a group of lamps. Also in the DALI system you can receive various statuses from devices. A big advantage of the protocol is its integration into various bus systems.

HOW THE “IN ONE BOX” SYSTEM IS SET UP

An intelligent lighting system includes a central control unit (if the system is centralized), a set of devices that send signals about any events to the control unit, and a set of controller devices that actuate actuators.

To organize the work, you will also need power supplies or (for example, for LED strips) drivers - electronic devices, in which it is not the voltage that is converted and stabilized, but the current.

IN finished projects The most commonly used technology is wireless data transmission. Such solutions are much simpler from an installation point of view. Let's say, the Insyte “smart home” consists of several blocks, each of which must be placed in the areas of the house that are subject to automation.

Inside the unit there may be an IP video camera, a microphone for voice control, IR transceiver for monitoring AV equipment and air conditioners, two outputs for lighting control, dimmer for smooth lighting adjustment, output for controlling curtains, inputs for connecting external sensors, Wi-Fi module for communication and control, built-in power supply . The system automatically finds components, establishes communication and performs configuration. The installer only connects the necessary elements of the system - sensors, lighting groups, curtain control mechanism.

In the Smart Visu Server (Jung) system, the compact device is mounted on a wall or on a DIN rail. The main components are connected using twisted pair cables.

To configure and manage a smart home, an application is used for mobile devices Smart Visu Server.

SMART SENSORS

Motion and presence sensors detect activity in the sensitive area. At the same time, the built-in photosensitive element registers the level of illumination, and if it is insufficient, it turns on the light. The presence sensor is equipped with a more advanced optical system, registering even small movements, so these devices usually cost more. Among the latest developments in this area, we note the PD2N-LED-M-1C sensor (B EG Luxomat) with built-in backlight. Energy-saving LEDs in its body provide a soft light that allows the basins to adapt faster when bright lighting is turned on.

LED LIGHTING

The actuators of the system are lighting devices. IN modern home As a rule, LED lighting sources are used, usually made in the form of lamps with an E27 or E14 base (minion) or LED strips and panels. LED lighting has a number of advantages over incandescent and energy-saving (fluorescent) lamps. First of all, LEDs are economical, reliable, have long term services. Colored LED strips allow you to implement scenarios with changes not only in brightness, but also in the shade of the light flux.

When designing LED lighting systems, a number of conditions must be met to ensure that the equipment works as long as possible.

Thus, LEDs are very sensitive to changes in current: they do not tolerate even the higher resistance created by the connecting wires that supply electricity from the power supply. For reliability, it is recommended to connect LED strips with a cable with a core cross-section of 6-10 mm 2.

Although many may find this requirement too high, such a cable allows you to power electric stove or a sufficiently powerful water heater. In addition, the power supply should not be placed too far from the LED strip, the maximum distance is 28-30 m.

EXPERT OPINION

Why do reliable LEDs fail? Almost always the reason lies in installation errors. Thus, electricians often do not install cooling radiators for the tape ( aluminum profile) and use a cable of insufficient cross-section for installation.

To correctly select the minimum cross-section cable for connecting from the power supply to the LED strip, you need to use one of the “formulas” that takes into account the planned length of the wire. “Formula” N91 (for copper cable up to 10 m long) 1A = 0.5 mm 2 “Formula” No. 2 (for copper cable up to 30 m long) 1 A = 0.76 mm 2

For example, for a tape with a current of 2 A (D8 W/24 V, 24 W/12 V), a cable with a cross section of 1 mm 2 is selected if the length of the latter is up to 10 m, and a cross section of 1.5 mm 2 when the length does not exceed 30 m.

In addition, for installation you should use copper cable(manufactured according to GOST). But a copper-plated cable or one manufactured according to specifications can significantly reduce the brightness of LED equipment.

The tape must be mounted on aluminum surfaces. Since it heats up quite strongly during operation, the profile acts as a heat sink. If you install the tape on drywall or furniture, its service life will be sharply reduced.

DON'T FORGET ABOUT THE FUTURE

Experienced designers try to include additional opportunities for increasing power in intelligent lighting systems. Practice shows that there are always some elements in the lighting system that can be improved - add, for example, automatic lighting garage, front entrance, adjacent space. Therefore, it makes sense to listen to the installers if they offer you to hedge your bets by including a more powerful controller, an additional cable line and other “useful little things” in the system being designed.

100 pcs. hyacinth bonsai, perennial hyacinth potted plants, Indoor easy…

“Smart Light” technology opens up a wide variety of devices that provide expanded capabilities for adjusting the light to suit your preferences and controlling the light remotely.

Conventional lighting fixtures are mostly boring. Some of them have buttons, a switch, and there are those that support the smooth fade function. It happens that, for variety, socket boxes are produced in different colors.

In any case, they can brighten up everyday life and bring something new into our lives. Add smart lighting to your apartment and you'll no longer have to search in the dark for a switch. Besides, " smart light» can serve as a signpost, guiding guests along light paths, and even deter potential burglars.

This technology allows you to remotely control electrical appliances in your apartment. In addition, it can be coupled with voice control, video recording, security system, thermostats, changing color shades light and many other things. Available these days huge amount inexpensive devices with which you can implement “smart lighting” in your apartment. Here are ten smart lamps, smart sockets and smart switches according to affordable price, which we liked most for this purpose.

Smart bulbs Philips Hue Starter Kit

This set smart light bulbs is one of the most popular because it is sold at a low price and works great. The package includes two light bulbs that connect wirelessly to the Philips Hue Bridge, a connecting device between the light bulbs and your smartphone. This system supports connection to personal assistant, Apple HomeKit, wireless speakers, IFTTT web service, Nest and several other smart home platforms and applications.

iDevices Switch Smart Plug

Due to the fact that iDevices Switch perfectly complements a lamp and any other electrical appliance, when testing many smart plugs, this model scored greatest number points. In addition, there is the possibility of voice control through personal assistants Amazon Alexa and Siri via Apple HomeKit. It's also the only smart plug with a side-mounted plug and built-in night lighting.

Smart socket

The new smart plug from Belkin is the most compact and inexpensive. Low price is caused by the lack of a power consumption tracking function, but there is an opportunity remote control lamps and other devices. The outlet can be connected to Amazon Alexa, as well as Google Home, IFTTT and Nest platform devices.

TP-Link Smart LED Light Bulb

The cheapest smart light bulb on our list doesn't require a linking device. Once you connect it to your smartphone via Wi-Fi, you can remotely control it, turn the lights on/off according to a schedule, and dim them. It’s best to start getting acquainted with “smart lighting” with this device. The light bulb, thanks to its compatibility with Amazon Alexa and Google Home, also works with other electrical appliances.

Wireless smart lighting kit

With this high-end system, smart lighting can become an integral part of your home. The delivery set includes a wall-mounted light dimmer and a Smart Bridge connecting device, through which you can connect to the pile different devices from Nest, Honeywell, Logitech, Sonos and others. A separate remote control is also included; using it or a smartphone, you can control the light both inside and outside the apartment.

LIFX Wi-Fi Smart LED Light Bulb

There are many different smart light bulbs. However, this model is notable for the fact that it does not use a binding device and can decorate almost any room with light shades. Works in conjunction with Nest, IFTTT and devices from SmartThings, as well as the Alexa service, which provides voice control.

Smart light switch TP –Link Smart Wi-Fi Light Switch

This is not only one of our favorite devices, but also one of the most inexpensive in our selection. After installation on the wall, using a smartphone or tablet, you can turn the light on and off, both inside and outside the apartment. In addition, set the time to turn off the lights and turn on the “no one is home” mode in order to scare away potential burglars. Or you can link your lighting to other devices or voice commands using Amazon Alexa and Google Home.

Belkin Wemo Light Switch

We like the last switch in this collection because it works well with other devices, thanks to its support for Google Home and Amazon Alexa, as well as Nest and IFTTT. To remotely control, turn on/off the lights according to a schedule and in a random order (to create the appearance that there is always someone in the apartment), you just need to establish a connection with your smartphone via Wi-Fi.

Smart socket

The device is a beneficial addition to any lighting device; it allows you to remotely control the light and set the time to turn it on/off, so there is no need to touch the switch at all. This is very convenient model, and it supports power tracking and responds to voice commands as long as the outlet is connected to Amazon Alexa and/or Google Home.

Smart LED strip Philips Hue LightStrips Plus

Thanks to this device, smart lighting will become more flexible - in literally this word. It can change shape, bend and be located in any room. Ideal for creating lighting in corridors, under cabinets, and indeed anywhere you want. Moreover, since Philips Hue LightStrips Plus is a component of the Philips Hue system, the strip can work in conjunction with many other smart home devices, provided that it is connected to the above-mentioned applications and services.

As 2016 gets underway, intelligent lighting control has already become commonplace. However, there remains a certain information vacuum, leading to misunderstanding of the role played by this subsystem in an intelligent home - a “smart home”.

What is a “smart home”? How does the lighting work in it? What does this give to the consumer? Let's look at these questions in this article.

Definition of a smart home

A comprehensive control system for all engineering equipment of a building is called a “smart home”. This system is built according to modular principle, allowing you to easily change and expand it without losing existing functionality. Modules - control of lighting, climate, security systems, and so on.

No matter how perfect the individual engineering subsystems are, only centralized control makes them all together a “smart home.” It is based on specific electrical wiring and a set of automation equipment. As a result of integration, each part of the whole works in close relationship with other elements. Let's look at this using lighting as an example.

Lighting control in a smart home

The method by which the lighting of a “smart” home is controlled is, from a technical point of view, more complex than the “classic” one, but for the user it turns out to be simpler. All complex logic work is laid down at the design stage, and control is displayed on a convenient panel with a single interface. Moreover, we are talking here not only about turning on and off lighting fixtures. The important elements involved in making lighting control intelligent are:

• Motion/presence sensors, contact sensors that turn on or off the house lights at a certain moment. For example, JUNG mini-sensors operating on the basis of the KNX standard, GIRA weather station with a complex of sensors.

• Dimmers that smoothly change brightness.

• Motorized curtains, blinds, roller shutters, electric curtain rods, through which the balance between natural and artificial light will be regulated.

• Lighting devices that can be either ordinary or independently “smart”. Moreover, they can be used separately or as an element of a single system. For example, Philips Hue light bulbs or the VOCCA smart socket.

• System equipment, including control panels and logic modules, connected together by special wiring.

Not only in interaction with each other, but also with other engineering subsystems, this equipment, as part of a “smart home”, allows you to achieve amazing comfort along with economical use electricity. Let's look at this in more detail.

What does “smart” lighting control give the user?

The end consumer is of little interest in the technical details of this or that equipment. More attention deserve the functions that are available through its use. With the help of “smart” lighting control it is possible to:

• Notifications. What to do when the music is loud in the house and the doorbell rings? In the era of home automation, this does not go unnoticed. The system is configured so that if music is on, the lights will blink a couple of times when you press the call button front door. This is where the role of integration comes into play, when one engineering system(light control) works in cooperation with others (security system and multimedia control).

Other events may also be processed. The motion sensor will turn on the corridor lighting when the child wakes up and will prevent him from tripping when it is dark. When the sensor is triggered, the system can be programmed to simultaneously dim the lights in the parents' bedroom to signal the situation. Convenient and safe. The algorithms laid down at the design stage are executed automatically without human intervention.

There are light bulbs that change color (Philips Hue). Using the special Taghue app, they can be configured to trigger messages from social networks And mail clients. Now, just by being next to such a lamp, you can instantly know about the arrival of a new message by its color. And only then take the necessary actions.

• Operation of sensors. Thanks to sensors, it is possible to unlock the potential of smart lighting control. This is where the functions of the security system intersect with lighting. Illumination of the path near the house, which is activated by a motion sensor, will not only create comfort when moving at night, but will also serve as a means of scaring away uninvited guests.

When in basement a home theater is located, the door contact sensor triggers a scenario: while the door is open, the light turns on; at closed door, if there are people in the room (the presence sensor is working) and the equipment is turned on, after a while the lights are dimmed to watch a movie, and the lighting of the corridor in front of the cinema is turned off. After viewing, everything happens in reverse order.

• Flexibility in creating the desired atmosphere and decor. The desire for new sensations always comes more often than it is possible to make a radical rearrangement or renovation in the house. With instant changes in lamp parameters (color, brightness, directionality), as well as the ability to create new scenarios (a series of actions performed by an event or when a button is pressed), the atmosphere in the room changes beyond recognition.

• Balance between natural and artificial light. Don't turn on the light bulbs in the morning if you can smoothly raise the curtains to let in the sun's rays. This is how the “morning” scenario works, triggering every day. If there is bad weather outside, the weather station sensors or a separate light sensor will inform the system about the lack of sunlight, and that you need to increase the brightness of the lamps.

So, lighting control includes all of these capabilities, but is not limited to them. Using modern professional systems“smart home” (www.intelliger.ru) there are no limits to the imagination and needs of the owner. As a cheaper option with minimal but sufficient functionality, there are individual devices, such as the mentioned Philips Hue light bulbs or VOCCA smart sockets. All this provides maximum comfort And high degree effective use energy resources - something without which it is difficult to imagine a modern home.

A smart home includes a system that combines all lighting fixtures in the room and in the surrounding area into a single network. This provides control over the process of their interaction and guarantees significant savings in energy resources. To regulate the lighting control system, the following are used:

• various switches,
• touch or keypads,
• remote controls,
• Apple (iPad/ iPod touch/ iPhone) and Android devices,
• automatic light and presence sensors.

Capabilities of an automated lighting control system Smart Home

Remote and centralized control of lighting. All lighting fixtures in the Smart Home system can be turned on and off using a signal sent from one automated device. For this purpose, automatic and remote lighting control is used. To provide control over lighting devices, remote controls and built-in panels are used, using which you can turn off the lights throughout the house directly from the bedroom. With this system, you will never forget to turn off the lights when leaving home: by pressing one remote control button located at the exit, the lighting will turn off in all rooms.

Adjusting the brightness of lamps. In a smart home, automated lighting fixtures installed in country cottage or apartment, as a rule, are equipped with dimmers. A smart home with a dimming system allows you to make the lights brighter when needed, or dimmed when you don't want the lamps to work at full power.

Automatic operation. Regulation of lighting scenarios and devices can be carried out automatically. For this purpose, operating schemes for lighting systems are specified. A smart home is based on the data that comes from presence, motion and light sensors, or depending on the time of day. Automatic switching on street lamps occurs in evening time, and a gradual decrease in their brightness until they turn off completely - in the early morning.

Reproduction of light scenarios. An automated lighting control system in a smart home gives the user the opportunity to set various programs and schedules for their switching. Activation of light scenarios is carried out manually or automatically. The programs determine the use of the necessary light sources, the frequency of their inclusion and switching off, as well as dimming. The scenario can be anything. For example, in a home cinema, by pressing one button on the remote control, you can simultaneously move the curtains, turn off the lights, lower the screen, turn on the video projector, DVD player, receiver or other equipment. The smart home “Vacation” mode will allow the automated lighting control system to independently turn on and off the lights in certain rooms in the absence of the user for a given period of time, which creates the impression of constant presence.

Saving resources. Smart home thanks to intelligent automatic control lighting can significantly increase the service life of lamps and reduce energy use by up to 40%. Achieving such savings is possible by adjusting the functioning of lighting devices in optimal mode power consumption and turning them off in cases where light is not required.

Use of additional equipment. In addition to automatic lighting control, it can be installed to remotely control the drives of curtains, gates, locks, roller shutters, blinds and other similar objects.

Remote lighting control

The lighting control system from the remote control is a complex of devices, which includes a signal source and a sensor receiving it, as well as others auxiliary devices. When you press the button to turn the light on or off, the signal sent from the remote control is sent to a unit connected to the lamps, which stops or resumes the supply of electricity. Using a remote control is especially convenient when there are multi-tiered lighting ( ceiling chandeliers, wall sconces, spotlights and other devices in the same or adjacent rooms).

To find out more about the possibilities automated systems centralized and remote control of smart home lighting, contact our specialists by phone numbers listed in the “” section.