Requirements
Comprehensive finishing of the loggia from the inside is not cheap at all. Judging by the reviews, the minimum price is fifteen thousand rubles. This is why many take on independent finishing this part of the apartment or house. So, in order to decorate the inside of the loggia with your own hands, you need to know some important points, without which this cannot be done.
First, you need to decide what kind of balcony you plan to make: open, closed, stained glass type or panoramic loggia. There are many options, there are even balconies with a fire escape.
In addition, you need to choose the right finishing materials. You can decorate your balcony with interesting “bark beetle” plaster, you can put tiles on the loggias with brick imitation, you can arrange it in the French style. A loggia with a cork for interior decoration looks very unusual.
It is believed that the maximum permissible load for a fully protruding balcony is approximately 1100 kilograms. The permissible weight for attached balconies that do not hang outside the facade of the apartment or house on the street is approximately 1800 kilograms. That is why it is very important to calculate the total weight of the building materials that you will use to glaze and insulate the balcony, as well as the weight of its interior decoration. If you prefer glazed varieties, keep in mind that this design is heavier.
Finishing the balcony from the inside is usually done last, so it is important to carry out very accurate calculations weight and density of other building materials in order to select more suitable material for finishing the loggia. When making calculations, keep in mind that many building substances must be soaked in water before use, therefore, for example, when keeping a substance in liquid for about four days, all mass calculations must be multiplied by a factor of 1.4.
Moisture resistance
The moisture resistance of a balcony directly depends on the moisture resistance of the materials used for finishing. When arranging a balcony, it is necessary to take into account such an indicator as the dew point. This criterion is achieved when one hundred percent air humidity is created at a certain temperature. And then condensation begins to form. Warm dew can not only spoil wood, which begins to rot, and iron, which begins to rust, but also negatively affects human health. In addition, such conditions contribute to the appearance of bark beetles.
The loggia, located on the sunny side, warms up very well, but it can overheat. Therefore, it is important to install ventilation devices on such glazed balconies; this is also true for unheated rooms. Some owners neglect moisture-absorbing materials when decorating the interior of the balcony, since they are quite bulky and “eat up” a large amount of space on the loggia. That is why on glazed balconies after cold winter so-called warm dew appears. Therefore, most experts advise using open, unglazed balconies.
Moisture absorption is calculated as a percentage of the dry weight of the material. If you carry out all the necessary measurements and calculations, you can find out that substances whose moisture absorption level is more than two percent cannot be used categorically for insulation and finishing of the loggia. As a rule, a fairly high percentage of this indicator is typical for materials with low density, so it is better to use denser components. If you use materials that exceed the maximum possible level of moisture absorption, you risk creating an atmosphere on the loggia that is conducive to the development of various respiratory diseases.
That is why it is necessary to purchase materials for the interior decoration of the loggia with a moisture absorption level of no more than half a percent. Some manufacturers are trying to convey this criterion to consumers using another indicator - the level of water absorption. It shows the ability of a particular material not to allow moisture to pass inside. But it is believed that this criterion does not show the level of moisture absorption at all. These conditions and calculations apply only to hanging isolated from interior spaces houses or apartments have balconies, but for options that are combined with a living room or kitchen, this is not relevant.
Heat resistance
This indicator characterizes how much the strength and reliability of a material can decrease from exposure to high temperatures. It is measured as a percentage. It is best to choose materials for cladding a balcony with a heat resistance level of no more than five percent. As a rule, for greater reliability, manufacturers create materials with a very high level of heat resistance, which is never useful in real conditions. Some experts believe that this is a marketing ploy, since this indicator is directly related to another more important criterion - frost resistance.
Frost resistance
This is an indicator that means the level of cyclicity of complete freezing and complete thawing of the constituent substances. In this case, these cycles are measured as follows. Freezing is considered to be a drop in temperature below zero degrees Celsius. Complete defrosting is considered to be heating of materials to more than zero degrees.
With good frost resistance, the material will not lose more than five percent of its properties or density. For facing materials that are used in decorative purposes, this indicator will be characterized by the absence of visual damage or other changes. When calculating the frost resistance of materials, one should take into account how quickly it can warm up. For example, concrete thaws very slowly, while lighter facing materials, on the contrary, melt very quickly, and therefore will thaw and freeze frequently, especially during seasons characterized by temperature changes.
Wall materials
To decorate the walls of the loggia, it is necessary, first of all, to level them with putty material. You can decorate your balcony walls on a budget without insulation. If necessary, the side parts of the walls should be insulated with extruded polystyrene foam, penoplex or other special material. After this, you can proceed to finishing the walls with facing materials.
An interesting option decoration is wall decoration decorative plaster. It looks very beautiful, especially if a skilled craftsman helps you with the design; moreover, it is moisture-resistant and reliable. Wall decoration in such a room with plasterboard is very popular. This method is very simple, drywall is easily cut and can be covered with any material, for example, liquid wallpaper. The only disadvantage of this building finishing material is that it is not frost-resistant, so it can only be mounted on insulated walls.
Another inexpensive and high-quality finishing material is wall panels made of plastic or vinyl. They can be easily installed with your own hands, they are very flexible and at the same time are not at all afraid of moisture. Manufacturers offer a wide selection of such panels, so you can find a variety of color and design solutions. But such material can easily fade in the sun, so it is better to use it for finishing loggias that are not located in the south.
For cladding the walls of the balcony, you can also use chipboard or MDF boards. This is a very affordable material. Although its appearance is a bit rustic, it can be varied by simply covering it with varnish or laminating film.
Moreover, such a film has many design options: it can have an image that imitates beautiful brickwork, or a stone design. This is a very stylish design solution, and also quite budget-friendly, but MDF and chipboard boards themselves are not suitable for use in rooms with too low or too low high temperatures In addition, it is a very non-ecological material.
The most beautiful and practical material for finishing loggia walls it is a decorative stone. This material is very reliable and durable because it is not afraid of high or low temperatures, as well as high air humidity. In addition, it is perfect for finishing loggia railings; it can also be used to decorate arches separating the balcony opening combined with the kitchen. Decorative natural stone looks very luxurious, but has a fairly high cost. But there is an alternative to this material - artificial stone, which looks very similar to its natural analogue, but has a lower price compared to it.
The main advantage of decorative stone, in addition to its appearance, is that it can be applied to any surface. It can hide unevenness and imperfections of all surfaces, since it has a relief texture. That is why before laying such stone, you will not need to level the surface of the walls.
Another popular material for finishing loggia walls is lining. This is very reliable material because it is made of wood. The best choice for a balcony is lining made of coniferous trees, since they are more resistant to frost. This finishing material has a beautiful appearance and high quality. To cover the walls of the loggia, you can also use paintable wallpaper, tiles of absolutely any design, for example, marble or brick, terrace board In addition, you can finish the walls of the loggia with corrugated sheets, clinker tiles, block houses and other materials.
Ceiling decoration
The ceiling is decorated after it has been insulated, the sheathing has been installed, as well as after laying the cable for lighting and installing lighting fixtures. The balcony ceiling can be finished with the same materials as the walls. As a rule, various decorative materials are used for this. An excellent material for finishing the ceiling is plasterboard, as it ensures its smoothness and creates an absolutely flat surface. It can only be laid on an insulated ceiling.
A more stable material for finishing the ceiling is plywood. It is quite reliable, has the ability to withstand temperature changes and, moreover, has a low cost. You can also decorate the ceiling with polycarbonate or corrugated board. These are very reliable and high-quality materials that are ideal for finishing this part of the room.
Ceiling with hidden niches can be done by decorating it with tiles. Tiles with a decorative pattern or a relief stone will help hide such a niche or, conversely, make it a beautiful decorative element, the highlight of your balcony. In general, decorating the ceiling with tiles is a very economical solution, and besides, tiling the ceiling is very easy, so you can do it yourself. You can choose tiles that will be the same color as the floor, and make the walls a contrasting color. The only drawback ceiling tiles is that it can crack when severe frosts.
Nowadays, many people decorate the entire room with clapboard, including the ceiling. Eurolining is distinguished by its beautiful appearance and environmental friendliness. Just keep in mind that everything wood materials must be treated with special disinfectants to prevent fungus from forming on them. Another option for finishing the loggia ceiling is the design slatted ceiling. This ceiling is made of metal elements and is very durable; it can be mounted both on glazed balconies and on open loggias.
Laying the floor
When choosing a material for finishing the floor on a loggia, you need to focus on the quality of the material, as well as its resistance to external factors, such as weather. In addition, it is important that such material is easy to wash and clean from dust, which very easily penetrates the loggia from the street. Most often, floors on balconies are finished with linoleum, laminate, parquet or ceramic tiles. Also some people prefer more budget option- regular painting or, conversely, one of the most expensive options - creating self-leveling floors.
Laminate and parquet are some of the most quality materials for finishing the floor. They are quite durable and withstand temperature changes very well. These floors look very elegant and do not require special care. Such floors are lighter in weight and warmer than, for example, floors covered with ceramic tiles, so they are perfect for a loggia. They can be used both to finish the threshold between the room and the balcony, and to finish the entire floor.
There are many other flooring options. This could be carpet flooring, MDF finishing or chipboard, covering with cork, marmoleum, as well as laying floors from solid wood. Each option should be selected based on the overall style you have chosen to decorate the loggia.
The interior design of a loggia depends, first of all, on its size. There are many types of interior that are perfect for decorating this room. For small loggias, it is better to choose corner modern furniture in warm colors. This way you can create a corner for relaxation. An example of this design is a small corner wardrobe on one side of the room and a corner sofa with a small table on the other side of the balcony.
In addition, you need to functionally occupy the entire area of this small room. So, you can install wall cabinets small size, which will take up very little space or shelves on which you can place pots of flowers. Plants will bring comfort and freshness to your loggia. Unusual, but very good idea There will be installation of furniture of the transformer model, which, if desired, can be easily folded to free up space. You can make the space of a cramped loggia visually wider by covering the walls and floors with light-colored building materials. The walls of the loggia can be decorated with framed pictures or family photographs.
For more spacious loggias, you can come up with many interesting design solutions. So, you can install an artificial pond, a gaming table, or a treadmill or other exercise machine for outdoor sports. An unusual option would be to divide a large loggia into different functional areas. You can install large table with ottomans or armchairs for relaxing with friends, you can put a sofa bed or hang a hammock. The hammock will look very interesting with wicker chairs and a table.
The loggia can be decorated in any style. It could be a loft style with brick walls and bright color transitions. This could be an Art Nouveau style, characterized by a combination of rich tones with calm light shades. You can also design a loggia in the Provence style, which is characterized by pastel colors, as well as a touch of romance in the room setting, which can be created with light curtains and soft pink or beige walls. To decorate a loggia in classic style it is better to give preference to finishing natural materials such as stone or wood.
The finishing of the loggia must be completed, even if you are simply planning to equip it on its territory utility room for drying clothes and storing various accessories, or to leave the space open for summer relaxation. Under any circumstances, using a clean and beautifully decorated loggia will be more pleasant than an untidy and sloppy room.
For finishing the loggia you can use various materials. In general, the procedure for performing the work remains almost the same, regardless of the chosen finishing option.
Familiarize yourself with the procedure for arranging a loggia and the features of the main finishing options, select the most optimal material according to its characteristics and get to work.
First of all, a frame made of wooden or metal elements is mounted around the perimeter of the loggia, intended for installation window system and fastening of internal and external cladding materials.
The fastening spacing of frame elements is selected individually, taking into account the characteristics of the selected glazing system, insulating and finishing materials.
After installing the frame, glaze the balcony. To do this, you can use plastic, aluminum or wooden systems.
Window structures made of aluminum and wood are characterized by higher environmental friendliness and durability. Plastic glazing in most cases is the most budget-friendly. For glazing a loggia, it is best to use double-glazed windows, because single-chamber ones are unlikely to provide adequate protection from noise, dust and cold.
To decorate the external walls of the loggia, use high-quality sheet materials that can provide adequate protection of the internal space from dust, precipitation and cold. Galvanized sheet materials and moisture-resistant plywood work well. Sheet materials are attached to a pre-arranged frame using self-tapping screws. Mounted on top of sheet sheathing finishing. Siding and other materials that are resistant to moisture are well suited. The remaining cracks are filled with construction foam.
The internal lining is carried out according to the standard scheme. First, frame elements made of wooden slats or metal profile. A polyethylene film or other suitable waterproofing material is attached to the frame slats. Foam boards, mineral wool or other suitable insulation are glued onto the film using a “liquid nails” type compound. A vapor barrier material is attached to the base slats on top of the thermal insulation. The slats of another batten, intended for attaching the finishing trim, are fixed to the bottom sheathing.
As a finishing material for the interior of the loggia, you can use moisture-resistant plywood, wooden lining, sheets of plasterboard, PVC panels and siding.
The floor as a whole is finished similarly to the walls. Tile, laminate, linoleum and other similar materials are suitable for finishing the loggia floor. To visually expand the space of the loggia, tiles or laminate can be laid diagonally.
Arranging a loggia is best done in the warm season.
Choice of finish
As noted, everything popular materials For finishing, loggias are arranged according to the same principle discussed above. Your main task comes down to choosing optimal finishing. Study the information provided about finishing materials, and you can choose the most suitable option for your situation.
Plastic panels
If finishing cost is a deciding factor for you, use interior design loggias PVC panels. Among the main advantages of this material, the following points should be highlighted:
![](https://i0.wp.com/stroyday.ru/wp-content/uploads/2015/03/%D0%9E%D0%B1%D1%88%D0%B8%D0%B2%D0%BA%D0%B0-%D0%BF%D0%BB%D0%B0%D1%81%D1%82%D0%B8%D0%BA%D0%BE%D0%B2%D1%8B%D0%BC%D0%B8-%D0%BF%D0%B0%D0%BD%D0%B5%D0%BB%D1%8F%D0%BC%D0%B8.jpg)
A wide range of colors allows you to create both plain and multi-colored surfaces from PVC panels. At the same time, finishes with imitation textiles, tiles, wallpaper, wood and other materials are available for sale.
The panels are initially equipped with convenient locking system, known as "tenon and groove". The entire installation of the finishing comes down to attaching the panels to the sheathing using self-tapping screws and snapping the factory connections.
Initially, such panels are developed for decorating interior rooms, so they can be used to cover a loggia only after it has been thoroughly insulated. At sub-zero temperatures, the panel's mounting plate can become deformed and damage the entire cladding. This phenomenon occurs especially often when finishing with elements 20-25 cm wide.
In view of all of the above, it is strongly recommended to use panels with a width of 9.6 cm for finishing the loggia. This cladding is characterized by high strength and frost resistance, in contrast to analogues with a more impressive width.
Video - Installation of plastic panels
Lining
This material consistently remains the most popular option for interior decoration of loggias and other premises. Panels made from natural wood are characterized by excellent environmental, external and performance properties.
The panels are extremely easy to install. Different types of wood can be used to make lining.
The differences between ordinary lining and the so-called. “Eurolining” lies only in the size of the slats. In the case of eurolining, the dimensions of the panels comply with standards approved in Europe. Also, such panels are equipped with a convenient and easy-to-use locking system.
Wooden flooring requires regular and careful maintenance. Before installing the finishing, the elements must be treated with an antiseptic. This treatment must be repeated every 2-3 seasons, followed by coating the finish with varnish or an oil-wax composition.
Take into account the fact that wood tends to dry out when exposed to direct rays of the sun and elevated temperatures. In view of this, it is strongly recommended not to use overly long panels for finishing the interior space of the loggia.
However, all of the listed shortcomings are fully compensated by the atmosphere created in a room equipped with natural wood.
Siding
It is a modern composite finishing material, widely used for decoration. various kinds premises. In terms of its external properties, siding is in many ways similar to eurolining.
Among the main advantages of siding, one should highlight its durability, resistance to moisture, etc. unfavorable conditions. This allows the material to be used for exterior finishing various surfaces, including the walls of the loggia. Indoors, such decoration will also be very appropriate.
When exposed to fire, siding melts but does not support combustion.
The panels are initially equipped with a locking fastening, which makes their installation convenient and extremely simple. To fix the siding to the sheathing, compositions such as “liquid nails” and other types of adhesive mixtures suitable for performing external finishing work are suitable.
Plywood and drywall sheets
Moisture-resistant sheets are also well suited for finishing the interior space of a loggia. It is important that the room is glazed and well insulated. The sheets can be used as a complete independent material, and serve as a base for other types of finishing: facing stone, tiles, mosaics, cork panels, various types of plaster compositions, etc.
Drywall and plywood are attached to pre-prepared sheathing made of aluminum profile or wooden slats.
Under any circumstances, it is recommended to at least putty the plywood or drywall trim. This will give the surfaces a presentable appearance and contribute to additional insulation walls
If you wish, you can leave the loggia not glazed, arranging an elegant open terrace. This loggia is perfect for summer gatherings in good company.
However, glazed rooms are much more comfortable and functional. If desired, you can arrange an entire winter garden on the glazed loggia. Or you can equip the loggia as an office or use it in another way to meet your needs and requirements.
If the loggia is open, special attention you need to pay attention to finishing the floor. For finishing cladding, use tiles or frost-resistant linoleum that can withstand exposure high humidity and negative temperatures.
Also make sure that the design of the loggia is in good harmony with the interior of the neighboring rooms. In other aspects, when decorating a room, be guided by your preferences and available budget, because no one but you knows what exactly your loggia should be like.
Happy work!
Video - Step-by-step technology for insulating and finishing a loggia
Even if you have a substantial area in a house or apartment, you won’t be able to ignore the balcony and loggia: it’s too good to relax in this small area. In winter you can enjoy the rays of the sun, and in summer you can enjoy the breeze and coolness. Therefore, finishing the balcony inside and developing a design is an important task. The place should be cozy and comfortable, but also functional. It is not easy to combine such different requirements in a very small area. There are several key points that will help you cope with these tasks yourself. They will be discussed further.
Balconies and loggias, of course, are structurally different. This is reflected in the insulation features and when installing glazing, but the design and finishing are identical, as is the possible use of the available space. Therefore, in the article we will talk about designs of both types.
Loggia with panoramic glazing— nothing prevents you from enjoying the scenery
Types of glazing
The design of a balcony or loggia is preceded by renovation. And the main repairs on these structures are glazing and, if so decided, insulation. Glazing of balconies and loggias is conventionally divided into two groups: cold and warm. Cold protects against the penetration of dust and precipitation, can significantly block the wind, but cannot greatly affect the temperature. Warm glazing also adds sound insulation and increased temperature to the entire specified set of properties.
The costs of warm glazing are much higher, but the functions that the room can perform after such modernization are much wider. How can it be used cold balcony? For storing some things, and even in the summer - to sit and relax, in the winter you can just jump out for a couple of minutes. Work rooms and bedrooms are also installed on an insulated balcony or loggia; some move the dining area there from a small kitchen. The decision is, of course, yours, but to make it easier to navigate the topic, we will briefly list the main methods of glazing, their advantages and disadvantages.
Cold glazing
Any of the methods in this category will cost much less than warm, but the level of comfort and functionality of the room remains quite low. The methods are:
![](https://i0.wp.com/stroychik.ru/wp-content/uploads/2015/11/vnutrennyaya-otdelka-balkona-4.jpg)
The most aesthetically pleasing are those that are well processed. wooden frames And aluminum glazing. They are still used to this day, but metal ones can be seen less and less often. Tram windows are present only in houses of old construction: the service life is still decent, but there are very few “freshly installed” ones: the appearance is too specific, and the temperatures are, to put it mildly, uncomfortable.
Warm glazing
Until recently, there were two options: frames made of PVC profiles or double wooden ones. Double wooden ones have the same drawback as single ones: they require good and regular care: painting. PVC profiles in this sense are much more practical: they only need to be periodically cleaned of dust and dirt. The second concern is that allowing them to be switched to the summer and winter positions takes only a few minutes and serves mainly to increase comfort and extend the maintenance-free service life.
Usage PVC profiles- the most popular type of warm glazing
Cons of glazing plastic profiles- their significant weight. Therefore, they are installed on a base that has a high bearing capacity: brick, concrete, welded from profiled pipes. In some cases, the disadvantages include the width of the profile: it limits the amount of light penetrating into the room. But high tightness and excellent thermal insulation properties, with good insulation of the floor and ceiling on the balcony and loggia, allow you to maintain a stable temperature inside. And this makes it possible to use the space more fully: balconies and loggias are combined with rooms or an office or summer garden is arranged in them.
Panoramic glazing can be warm: energy-saving double-glazed windows allow you to maintain the temperature without much effort
The third type of warm glazing for balconies and loggias is panoramic. These are double-glazed windows created using a special technology, for which a minimum of material is used for fastening. There is an option for completely frameless glazing: double-glazed windows are attached to one another. An interesting option, but expensive, and not the easiest to design.
How to decorate a balcony or loggia
To decorate glazed and insulated balconies, you can use the same materials as for finishing rooms, but the most popular method is. It can be wooden or plastic. Decorating the inside of the balcony with wooden clapboard creates a more comfortable environment, and plastic is easier to care for and does not need to be painted regularly. Once you decide which property is more important to you, you can choose the appropriate option.
Lining and plastic panels - the technology for finishing the balcony inside is the same, the materials are different
The second most popular material is decorative stone or brick-like clinker tiles. Finishing balconies inside with these materials is possible with both cold and warm glazing, as well as without it at all. The material is durable, easy to care for, frost-resistant, and does not deteriorate under the influence of ultraviolet radiation. So not a bad choice.
Clinker tiles “brick-like” look decorative on the balcony, especially if they are skillfully used in the design
With warm glazing, finishing loggias inside with plasterboard is popular. It is especially relevant when combined with rooms, but it also looks great just on the loggia. Just one thing: just in case, use moisture-resistant plasterboards in case of condensation.
Decorative plasters have remarkable properties. They look great, are easy to care for, and many can be washed with brushes using detergents, have long term operation, there are pigments that are not harmed by sunlight. The disadvantage of this type of material is its high price. But it is beautiful and functional.
One of the options for decorative plaster. Decorating the inside of the balcony with this material is beautiful and durable
Modern trends in interior design are a mixture of different finishing materials. You can also experiment when decorating loggias or balconies. Most often, stone and tile are combined. They are usually used in conjunction with other materials. Any “duets” look good, and even unexpected combinations refresh the interior.
Options combined finishing There are quite a few, we will attach photos of the most interesting ones at the end of the article.
Floor: what is best to make it from?
The choice of material for finishing the floor on the balcony and loggia depends on the glazing or lack thereof. If the balcony is not glazed, perhaps best material- concrete or . Another option - ceramic tiles, or better yet, natural stone or porcelain stoneware with frost-resistant glue.
Self-leveling floors look great and are easy to clean
With cold glazing, the choice is almost the same, because all these materials, if the technology is followed, can withstand temperature changes. As a temporary option, you can also consider laying linoleum. But he won’t last long: ultraviolet radiation and frost are far from the conditions in which he will feel good.
Tile - traditional material for difficult operating conditions
On an insulated balcony or loggia, a wooden floor is most often made: it is convenient to lay insulation between the joists, and in addition, the wood is pleasant underfoot, and it itself has good thermal insulation characteristics. That is, it helps reduce heating costs.
Another option for flooring on joists: lay plywood or OSB on them, and on this base any floor covering, including laminate and even parquet board. If you want to use tiles, then it would be a good idea to have a warm floor underneath, otherwise it will feel cold even on top of a good layer of insulation.
Balcony and loggia design: ideas and photos
First, about the design of the balcony, which is used for its intended purpose: for a pleasant stay almost fresh air. Even an open balcony is suitable for this purpose. The interior decoration of the balcony shown in the photo is not super complicated or expensive, but the idea is great. The ceiling, floor and low long drawers around the entire perimeter are made of clapboard. Most likely painted with oil and pigment. A few pillows or soft mats will turn this space into a great place to relax.
With a glazed balcony or loggia, everything is simpler: install what you consider necessary. It is important to choose the right shape and size to make the most of the space. Most often, a small table and one or two chairs, small armchairs are installed. This set will easily fit even on a loggia or balcony with an area of 3 meters, and so that the table does not interfere, it can be folded.
The design style can be any, but it is desirable that it be in the same vein as the style of the entire house. General idea must be traced in the design of all premises. This is logical and looks more organic.
If the apartment is small and there is simply nowhere to put things, cabinets or shelves are installed on the balcony or loggia. They can be placed so that there is still room for a chair, or at least for a folding chair.
They even do it on a large loggia or insulated balcony. But few people can squeeze in anything larger than a wall cabinet that stands at the end. The only advice: if you are going to use shelves for storage and not for decoration, make them closed: few people can maintain ideal order in storage systems.
Kitchen on the loggia: design and finishing ideas
It is the kitchen area that is not being built on the loggia: neither the maintenance services nor the firefighters will allow it. The dining area is brought out onto the warm balcony. It's possible.
It’s not difficult to create a dining area on a balcony or loggia - a wide window sill under the glazing frames, high chairs, appropriate lighting
When combining these two areas, the window sill can be removed, but the wall cannot be touched. Unless you order a project and strengthen the remaining parts: it still won’t be possible to completely demolish it, otherwise the house may collapse. To make the existing opening look like a decoration, you can round it, make a semi-arch, or choose another type of design (read how to do this.
With this approach, the decoration of the balcony inside should echo the design of the kitchen. The brick finish looks good in combination with smooth plasterboard walls.
Office
For productive work Privacy is often necessary, but it’s not easy to find a secluded corner in an apartment. You can organize your workplace on a warm balcony or loggia. After all, all you need is a small table and a comfortable chair or armchair.
Workplace on the loggia - a small office for work
To create the maximum working atmosphere, the interior decoration of the loggia must have soundproofing properties. Is it wood, cork or vinyl wallpaper on a non-woven basis.
Shelving in place former window- don’t let the place go to waste
Bedroom on the balcony
In small apartments, sometimes there is not only nowhere to organize an office, but even with a separate sleeping place problems can arise. If you have a balcony, even if it’s 3 square meters in area, it can be turned into a small bedroom. And if the area is 6 square meters or more, then on the other side you can also arrange a work corner.
A bedroom on a balcony is not a myth. Everyone has their own approach, but it can be done
Even completely small balcony you can make a “lying” place.
The main thing is desire, there is always a solution
An example of “green” arrangement - a garden
If none of the above methods for decorating a balcony warms you up, you might like the idea of turning it into a garden. Well, maybe not to the garden, but to the kindergarten. This arrangement option can be implemented on open balcony, but then it is necessary to plant annuals that quickly produce greenery.
You can bring out flowers in pots for the summer. There are even more options here. If there is little space, you can make special shelves or a niche on one of the walls.
By the way, a good idea in the photo above: lay wooden shield and build yourself a place to rest on it. Comfortable and easy.
The same ideas can be implemented on a glazed and insulated structure, but the choice of plants is wider - you will still maintain the temperature, so even tropical plants you can try to grow it.
Balcony design and interior decoration options: photo ideas
Sometimes you need an idea, some kind of picture that will help those thoughts that have not yet found concrete expression take shape into a final solution. This chapter contains photos that I found interesting. Maybe some of them will help you develop your own design project and interior finishing option for the balcony.
Range of services provided
Turnkey glazing of balconies
The opportunity to obtain a room completely ready for use PROFITABLELY and WITHOUT EXTRA HASS. All work is performed professionally, efficiently and quickly!
Our difference from competitors
Consists of the widest possible range of services for the repair and finishing of balconies, including:
- regular and remote glazing,
- combining a room with a loggia,
- registration of permits,
- roof installation,
- insulation,
- interior decoration,
- external finishing,
- installation of slopes and window sills,
- landscaping.
We are ready to satisfy your natural desire to provide a balcony or loggia maximum functionality. We bring to your attention both traditional and original options space design.
Balcony glazing options - from economy to premium class!
There are essentially only two options for glazing and finishing balconies:
- warm,
- cold.
Plastic windows - German and domestic production
We offer high-quality and durable German REHAU profile, providing high level energy saving and reliably protecting from drafts and precipitation. You can also choose glazing, the world-famous German KBE profile, characterized by increased strength and proven environmental friendliness.
More affordable, but no less reliable, are the BrusBox and Novotex profile systems. PVC structures are perfect for the harsh Russian climate, provide high acoustic protection, and have a long service life.
Aluminum profile - cold or warm (with thermal break)
The products of the European brand Alutech are presented in several profile options - in cold and warm versions. In the warm version, the profile contains a thermal break. In addition to high thermal insulation, it also provides noise protection. The Spanish cold PROVEDAL profile has proven itself in the glazing of balconies and loggias that are not intended for year-round use. It reliably protects from precipitation and blowing, and also increases the usable area, making the balcony or loggia more functional without extra costs.
Wooden windows - natural beauty and durability
For several years now, wooden glazing of balconies and loggias has not lost its relevance. We offer you an absolutely environmentally friendly profile made of three-layer laminated veneer lumber, which has high heat and sound insulation properties and is distinguished by natural beauty and durability.
The wooden profile is made from the following types of wood:
- pine,
- larch,
- beech.
Elite frameless glazing
Now you have unique opportunity increase the usable area of loggias and balconies and enjoy the beauty of the scenery. Frameless glazing erases boundaries and gives a sense of space, allowing you to look at the world in a new way and at the same time emphasize your own status.
- Thanks to successful cooperation with such a leading global manufacturer of frameless frames as the Finnish company Joy Vision, we implement glazing of balconies and loggias of the most complex geometry.
- Lumon frameless designs will allow you to achieve the effect of a “solid wall”, and at the same time provide high protection from blowing and precipitation.
- The real leader in the production of silent frameless glazing systems is Claroflex. Silicone seals and felt brushes provide high practical characteristics and guarantee comfortable operation.
- Frameless glazing of balconies and loggias Todocristal - quality proven over the years. It is possible to select the side for tearing off the sashes. The glazing itself can have any configuration, while guaranteeing almost complete opening of the opening.
Construction type:
- traditional tilt and turn casement windows- a type of opening that has been proven over the years with the possibility of ventilation. Reliability and ease of use are combined with ease of maintenance;
- parallel-sliding - save useful meters, ensuring ease of care for the sashes;
- glazing with parking of “accordion” and “book” sashes - ensures maximum opening of the opening. When closed, it allows you to unhinderedly enjoy the opening landscapes;
- corner frameless glazing - guarantees maximum light transmission and gives the balcony or loggia a status look;
- French windows - contain thin slats and look especially beautiful in large-format and arched glazing.
Finishing the floor on a balcony or loggia
When arranging a warm balcony and finishing a loggia, special attention is paid to finishing the floor.
- Heated floors. Today, it is popular to create electrically heated floors. This solution allows you to create a comfortable indoor microclimate, which makes it possible to use it as a living room. Ceramic tiles are well suited for finishing heated floors.
- Hydro insulation. Involves placing between wooden joists thermal insulation material, mounted on top wooden lining. This method is more economical than electrical insulation, but if the room is used as a living room, the installation of heating devices will be required.
- Alternative way. Moisture-resistant plywood can be used as a material for floor insulation, with laminate or linoleum laid on top.
Turnkey finishing of a balcony in Moscow from the Moscow Glazing Company company implies a full range of glazing, insulation and finishing services. We also carry out electrical work, installation of built-in furniture and other services.
Our company’s specialists have extensive experience in the construction, repair of balconies and finishing of loggias of any complexity. We will bring to life any design solution for finishing a balcony. For consultations or calling a specialist at home, use the feedback button.
Exterior decoration of the balcony
In addition to the high requirements for the aesthetics of the external decoration of the balcony, it must provide reliable protection from external influences and create conditions for an optimal indoor microclimate.
A well-chosen type of finishing and professional installation of facing materials will help with this. We guarantee a long service life of the finish while maintaining high practical characteristics and aesthetics.
Finish type | Advantages: |
Plastic panels |
|
Siding
|
|
Corrugated sheet |
|
Mineral and silicone plaster |
|
Wooden lining (impregnated with special compounds) |
|
Decorative 3D panels for finishing balconies
We offer our clients exclusive solutions for finishing balconies: 3D panels
This is modern decorative material, which is characterized by versatility and unique view. Possibility of use decorative 3D panels are endless.
They perfectly mask uneven walls, allow you to hide communications and can be mounted on top of insulation.
The original volumetric effect can create a unique design on the balcony/loggia
3D panels are produced from high-quality materials, which ensures high strength, resistance to mechanical damage, and a long service life. They are not afraid of moisture and provide a high level of thermal and acoustic insulation. There is no need to level or prepare the walls before installation, which significantly speeds up and simplifies the installation process.
Moscow Glazing Company specialists will help you choose 3D panels to suit any style. We will arrange classic interior using plaster panels with columns and stucco, a minimalist interior with metal or glass panels, for a high-tech style we will choose surfaces that repeat the natural pattern of wood.
Finish options
Exterior decoration of balconies and loggias
- most often done using siding. It provides reliable protection from moisture and dust, and adverse weather conditions.
Interior decoration may vary:
- For a cold balcony. The priority here is to ensure reliability and durability. If there is no need for insulation, finishing the balcony with plastic is sufficient. It is important to use space rationally, provide a storage system for household supplies and drying clothes.
- For warm balcony. Here you should be very careful when choosing a finish. Before starting renovations, you should decide whether the space can be used as separate room, the finishing method will depend on the purpose of the room. You can decorate the balcony with wood, plasterboard, plastic, MDF clapboard, use several materials at once, or combine cladding. An important step is the allocation of space for the installation of storage systems, clothes dryers, additional furniture and other elements.
How is a balcony finished with wood?
"Moscow Glazing Company" will help arrange stylish space on your balcony.
Order finishing of balconies and finishing of loggias on a turnkey basis
- Creating a frame for lining
- Insulation mineral wool or foam plastic
- Installation of fastening elements
- Sealing
- Finishing parapet, ceiling, walls
- Slope design
- Floor insulation
- Installation of skirting boards, corner strips, fillets.
Decorating the balcony with wood will create a cozy, homely, warm atmosphere and will fit well into any interior.
Wood is safe and environmentally friendly pure material, when used to decorate a balcony, will bring a feeling of unity with nature. A variety of species and wood processing options will provide uniqueness to the interior.
For cladding a balcony they can be used as traditional wood panels, and others, more available materials– MDF sheets, bamboo panels, cork, wooden lining, which is the most popular and aesthetically attractive option.
The cladding is performed on top of a thermal insulation layer, which ensures effective heat conservation. When choosing a material, we carefully check the quality and whether it has been treated with protective compounds against high humidity and pests. The surface is resistant to mechanical damage and retains its attractive appearance for many years without requiring special care.
What is the difference between balcony decoration PVC panels?
For interior lining balcony "Moscow Glazing Company" uses various materials. Today, PVC panels are especially popular, which allow you to create unique design rooms thanks to the variety of colors and patterns. The surface of the panels can be plain or with thermal printing, which is protected by thermal film. Bright, rich patterns can be of any complexity, including landscapes and photographs. There are coatings with glued laminated film that imitate any surface - wood, stone, leather, etc.
Balcony finishing with PVC panels allows you not only to transform the room, but also to save significantly. Despite the availability of the material, it has a number of advantages:
- not static, dust does not accumulate on the surface;
- resistant to high humidity;
- environmentally friendly due to the absence of toxic substances;
- easy;
- Available in any color.
But this material also has disadvantages - it does not tolerate temperature changes. In severe frosts it may become deformed. Therefore, this method of cladding is optimal only for insulated balconies and loggias.
The final stage of the renovation is finishing the inside of the balcony. Our article presents photos of the design with various options cladding. Selection completed projects proves the diversity of the building materials market using specific examples.
PVC panels and lining for wall decoration.
Lining and eurolining
Floor and parapet cladding with wood.
The walls, floor and ceiling in the home office on the loggia are lined with wooden lining.
Eurolining is a dry planed board, and lining has natural moisture. Due to the main difference, eurolining cladding is considered a higher quality option.
Spacious loggia covered wooden beam, there are plastic panels on the ceiling.
The room is completely covered with wood. The cabinet is made of laminated chipboard.
Combination of decorative brick and painted wood in room design.
In modern design, loggias are often combined natural textures: stone and painted wooden paneling.
The main advantages of lining and eurolining:
- Environmentally friendly (harmless for use in residential premises);
- Long service life, subject to proper care (about 15-20 years);
- Good heat and sound insulators;
- Installation work using lining does not create any particular difficulty.
Large boards, laconic furniture and neutral shades - all this allows you to decorate the room in a Scandinavian style.
Wooden board in the interior of the room. The boards on the floor are impregnated with a special protective compound.
Painted wood and wallpaper light shade in the interior.
Scandinavian style in interior design. Straight strict forms, light colors and natural textures.
Wooden lining. Varnish was used as a protective layer.
Block house
The effect of rounded timber allows you to create a dacha corner on the balcony.
The appearance of the block house imitates rounded timber. Moreover, experts evaluate its performance qualities better than those of its natural analogue. Home distinguishing feature- maximum smooth surface, without a single defect. That's why this type The cladding is so attractive.
When facing a loggia with a block house, it is better to choose a board with a small diameter to avoid the visual effect of reducing the space.
PVC
Facing decorative bricks and light-colored PVC panels.
The room is decorated plastic panels in beige tones.
PVC panels in interior design.
Let's consider the advantages of PVC panels:
- PVC panels are easy to care for and maintain their original appearance. Most often, the panels are cleaned with a soft sponge soaked in water;
- A large selection of shades allows you to find exactly the option you need to create your interior;
- The service life is longer than that of lining. PVC is not affected by moisture, changes in air temperature and exposure to light;
- Is one of the most economical ways repair;
- The panels are fireproof.
Plastic panels in the loggia space.
Flaws:
Not environmentally friendly.
For the design of the home hookah bar, PVC elements in light green colors were used.
MDF
MDF boards resemble fiberboard, but are processed differently thanks to modern technologies.
Glossy MDF boards with marble texture. For the renovation, two pastel shades were used.
Pros of MDF:
- High strength (not inferior to ordinary wood);
- Elasticity of plates. Thanks to this property, the slabs make it possible to mask differences in the sheathing structure (up to 50-70 mm);
- Practicality (long service life);
- Affordable price;
- Installation does not require much time and effort;
- Wide range of sizes;
- Large selection of textures and colors of MDF panels. In collections different manufacturers natural textures are presented - marble, wood, etc.;
- There are several coating options - MDF can be matte, glossy or textured.
Plates MDF wooden textures.
Cons:
- MDF boards are fire hazardous;
- Affected by moisture.
Drywall sheets
The walls are covered with gypsum plasterboard, top layer- wallpaper.
Wallpaper in room decoration.
Paintable wallpaper. The walls are leveled using plasterboard sheets.
The interior is in light green shades. Painted sheets of drywall in the loggia space.
GKLV is often used in the repair of loggias, despite the fact that the material is fragile, and sheets without finishing cladding quickly lose their original appearance.
The finishing layer is two types of wallpaper (light gray and imitation stone).
Painted wall surface (at the base of a plasterboard slab).
The reason for its popularity is explained by a number of the following features:
- Drywall sheets are quite easy to install;
- Due to the properties of the material, it is possible to implement various ideas in the interior of the loggia;
- Low price GKLV.
The niches in the room are made using plasterboard, the top layer is paint.
Drywall sheets are used as a basis for creating flat surface- then the surface is decorated with wallpaper or painted.
Drywall covered with wallpaper for painting.
Mini bedroom. The room is covered with gypsum plasterboard, the finishing layer is paint.
To install gypsum boards, you must first organize high-quality hydro- and thermal insulation. Thus, fragility will not cause trouble during operation.
The walls of a small nursery are leveled using gypsum boards. The finishing layer is paper wallpaper.
Decorative plaster
Finishing using this material is quite common in the repair of balconies.
Surfaces covered with decorative plaster perfectly complement Scandinavian style in the interior.
The walls of the loggia are covered with decorative plaster.
Small living room on the balcony. Plaster was used for cladding.
Advantages of decorative plaster:
- This finish will last for a long time(does not rot during operation), resistant to impact chemicals, mechanical damage, high humidity and sudden changes in ambient temperature;
- The surface is not destroyed;
- Due to its special structure, plaster is used to create various reliefs, patterns on the surface and texture of natural materials;
- The material is absolutely harmless and fire-resistant, has a high degree of vapor permeability.
- Allows you to create a comfortable atmosphere, provides good sound and heat insulation;
- The base for application can be any: brick, concrete, gas and foam blocks, plasterboard;
- The material can be applied in such a way that the surface becomes as smooth as possible or done sloppily, otherwise the plaster will look aged. It all depends on your preferences.
Balcony terrace. The special atmosphere is set by the texture of the plaster and the careless application of the material.
Artificial stone
A combination of decorative stone and plaster.
Balcony design using artificial material that imitates natural stone.
Brick effect in modern design.
Advantages of decorative stone:
- Affordable price;
- Variety of textures, colors and sizes;
- There are straight and corner elements, so the installation process is extremely simple (no special experience is required for installation);
- Good resistance to rotting processes;
- Prevents the occurrence and spread of fire;
- Not subject to corrosion;
- High wear resistance;
- Service life comparable to brick and concrete;
- Does not accumulate radiation, harmless to humans;
- Eco-friendly;
- The low weight allows the stone to be installed immediately, without prior reinforcement of the walls.
Artificial slate for interior decoration.
Decorative brick in a modern interior.
Artificial brick goes well with the texture of wood and modern items furniture.
Ceramic tiles, mosaic
Tile and mosaic are resistant to mechanical stress, moisture, sun rays and fire. Ceramics do not absorb dirt and retain their appearance for a long time. The elements are quite easy to install.
Greenhouse on an open balcony. Mosaic white in the decoration of walls and part of the floor.