Installing a leopard alarm requires skills in working with car electrical equipment, so it is best to entrust it to professional craftsmen. If you decide to carry out such work on your own, then you need to do it in compliance with certain rules and in a certain sequence.
First of all, be sure to disconnect the “-” terminal of your car’s battery, thereby protecting yourself from possible short circuits.
The leopard central alarm unit is installed in the car interior away from sources of heat and moisture (usually behind the dashboard).
The communication module is attached to the windshield using tape with double-sided adhesive. To ensure reliable fastening, do not forget to thoroughly clean the installation site of the module from dirt and degrease, and in winter, additionally warm it up to above-zero temperatures. The main condition is that the antenna must be as high as possible and be no closer than 5 cm from the metal elements of the body.
Place the siren under the hood or in any other place inaccessible to strangers. Among other things, this place should be as far as possible from strong sources of heat. To protect against possible accumulation of water, point the siren's horn downwards. If the siren is equipped with an autonomous power supply, access should be provided for the service key.
The temperature sensor is mounted in the car interior or in the engine compartment using one of the standard bolts.
Particular attention should be paid to the installation of limit switches for the closed (open) position of the hood and luggage compartment. The free movement of the sensor rods must be at least 0.5 cm - if configured incorrectly, there is a risk that the car alarm will periodically trigger false alarms.
Install the impact recorder inside the car, attaching it directly to the metal of the body using adhesive tape. The sensor installation location should be as close as possible to the longitudinal axis of the machine.
Choose the location for the signal LED according to your preferences, but in any case it should be clearly visible from the outside.
Place the emergency connection button hidden, but access to it should be quite simple.
Connect the wires in accordance with the standard connection diagram; do not forget that all main electrical circuits must be protected by fuses designed for the appropriate currents:
- Signal light circuits -10A;
- Engine start blocking circuit -30A;
- Central locking control circuit -15A
Which theft protection should you choose? Which security system should you trust to keep your car safe? These are the questions that all motorists without exception are looking for answers to. Some place emphasis on a high degree of protection, placing less emphasis on control comfort, while others do the opposite. Fortunately, today there is a product on the market that successfully combines both the first and second qualities. The Leopard alarm system is a worthy example of how you can get an effective and easy-to-use anti-theft device at an affordable price.
Model range: choice for every taste
The car owner can choose from two groups of systems of this brand, differing from each other in internal content (functionality) and, accordingly, in price:
- Economy class. This group of alarms includes the Leopard 433 (a reliable model that is enjoyed by owners of inexpensive domestic and foreign cars) and the Leopard nr 300 (perhaps the most budget option).
Thanks to well-thought-out software equipment: an optimal set of security properties and a minimal but sufficient set of service functions, both the first and the second cope perfectly with the tasks assigned to them. The price of such alarms does not exceed 3 thousand rubles. - Business class. A typical representative of this category is ls 60 10 - leopard alarm, which has in its arsenal the entire necessary set of characteristics, including:
- two-way communication(all messages about the system status are reflected on the control panel indicator - key fob);
- turbo timer mode(prevents accelerated engine wear);
- Anti-Car-Jacking mode (blocks the engine while driving in case of an attempt to steal);
- remote control(unlocking/locking doors, hood, trunk);
- working with autorun(by timer, alarm clock or temperature);
- other useful options necessary for 100% protection and comfortable control.
The Leopard ls 70 10, the Leopard LS70/10 EC and other models of the L and LS series can boast greater capabilities. The price range in which these alarms are located: from 3 thousand rubles.
There are no premium alarm systems in the Leopard line.
Installation and connection: everything is simple and clear
In addition to a wide selection, the manufacturer can please the car owner who preferred leopard car alarms with ease of installation and configuration (those who preferred alarm systems Cenmax, Starline, Tomahawk, Pharaon and others also receive a similar gift, but complete with an inexpensive cost only those who stopped their selection on Leopard).
The low price and the opportunity to refuse the services of professionals and save even more on your finances are captivating. All you need to do is carefully study the instructions for use (regardless of the model, be it Leopard L 90/10 EC or leopard lr 433, the operating instructions included in the kit will answer all your questions).
- Location of alarm elements. Stable operation of the system largely depends on the correct localization of its components. Ideally they should be located like this:
- radio antenna(away from standard wiring, from metal panels, preferably as high as possible);
- central block(in a place in the cabin protected from moisture and heat, for example, behind the dashboard);
- siren (in a place protected from heat and moisture in the engine compartment, always with the horn down);
- impact sensor (in the cabin at the closest possible distance to the longitudinal axis).
- Connection to wiring. Strictly in accordance with the connection diagram. This event does not require any special knowledge or skills. Using the diagram illustration is quite simple (everything is accessible and understandable).
Operation: Frequently Asked Questions
It would seem that everything is fine, install, connect, use, but during operation the car enthusiast may encounter some difficulties that raise a number of questions, in particular:
- How to use the keychain? Typically, Leopard alarm systems include two key fobs (the first main one, equipped with an LCD display, designed for full access to system options, the second, additional, programmed to perform only basic control functions). Both send commands to the system by pressing a button or a combination of buttons (you can find out about the specific correspondence of a button or their combination to the called option in the operating instructions).
- How to find out the model by keychain? What if the alarm model is unknown, but it is already installed on the car, and it also needs to be controlled somehow. The World Wide Web will decide everything. You just need to compare your keychain with those that the Internet offers for viewing, and find yours among the great variety.
- How to enable autorun? After the control panel has been mastered, and the unknown alarm system has “found its name,” it’s time to think about comfort. Almost all systems in the Leopard line are alarm systems with auto start.
This option can be activated by selecting the desired parameters in the programming table (start time, interval between turning on the engine, critical temperature threshold at which the engine will start) and pressing the buttons in sequence:- button 1 (hold it until 1 short beep appears);
- button 1 (press and hold again until the corresponding icon appears on the key fob screen, indicating temperature start);
- button 2 (until the icon indicating timer start appears);
- button 3 (until the icon appears indicating the alarm starts).
That's all autorun is turned on (pressing it again in the same sequence will turn off the mode).
It is worth noting that, despite the reasonable cost (which in itself is already attractive), the Leopard alarm system deserves only positive reviews. Is it possible to refuse such profitable and effective protection against theft?
Installation instructions for LEOPARD LS 90/10 EC
The car security system with two-way communication LEOPARD LS 90/10 EC is designed to protect the doors, hood, trunk and interior of the car, sound, visual and radio notification of the owner about the current state of the security system and the protected car. In addition, LEOPARD LS 90/10 EC prevents unauthorized engine starting. LEOPARD LS 90/10 EC includes an engine start control system that can work on vehicles with any type of engine and gearbox.
The standard LEOPARD LS 90/10 EC kit includes:
- Central control unit with complete installation kit.- Communication module.
- Built-in software-configurable two-level shock sensor with a small-sized remote detector.
- Remote control with built-in pager and LCD display.
- Unidirectional remote control.
- Indicator LED.
- Emergency shutdown button.
- Temperature sensor.
- Instructions for installing and operating all modes of LEOPARD LS 90/10 EC.
Alarm remote controls
Bidirectional remote control with pager function. It is a miniature transmitting and receiving device powered by a 1.5 volt battery (type LR03 AAA), which lasts for approximately 6 months of operation. The remote control contains four control buttons and an LCD display to indicate the system status, confirm command execution and the reason for the alarm. When you press any of the remote control buttons, the transmitter generates and transmits a coded radio command, which changes with each new button press, thereby preventing the possibility
interception of your alarm code by a code grabber. If the built-in pager receives an alarm signal, you will hear a sound signal and the corresponding icon will be displayed on the LCD display.
Required information.
Emergency alarm shutdown.
The LEOPARD LS 90/10 EC security system has simple and coded emergency shutdown modes, which you can select using programming.
If the alarm control panel is missing or faulty, to disarm the alarm: open the door and leave it open, turn on the ignition, press the emergency shutdown button 3 times or enter the PIN code (if code mode is programmed), then turn off the ignition.
To enter a PIN code:
1. Open the door and leave it open.
2. Turn on the ignition.
3. Press the emergency shutdown button a number of times equal to the first digit of the set PIN code.
4. Turn the ignition off and on again.
5. Press the emergency shutdown button a number of times equal to the second digit of the PIN code.
6. Turn off the ignition. If the PIN code is entered correctly, the system will be disarmed.
To learn how to set a PIN code and enable code mode, see the programming section.
Emergency arming.
If there is a need to set an alarm LEOPARD LS 90/10 EC to arm in the absence of a working control panel, press the emergency shutdown button 3 times with the door open and the ignition on and turn off the ignition. You will hear 1 beep and the lights will flash 1 time. After 20 seconds, the lights will blink once, the system will arm without locking the doors. When opening a door or turning on the ignition after emergency arming
When armed, the lights will flash 4 times, and the 20 second alarm delay function will be activated to give you the opportunity to turn off the LEOPARD LS 90/10 EC alarm without using the control panel (see Emergency shutdown of the alarm). If the system is not disarmed within 20 seconds, an alarm will sound.
Leopard LS 60/10 is a modern car alarm that is quite different high communication range, ease of use and reliability.
The system is controlled using ergonomic key fob with LCD display. The key fob allows you to control the system from a distance up to 500 m and receive notifications remotely up to 1000 m. All processes associated with the operation of the car alarm are displayed on the key fob display in the form of icons. The kit also includes an additional key fob, which is designed to perform basic control functions. The range of the additional key fob is about 20-50 meters.
This car alarm model is characterized by high functionality, which provides additional comfort when operating the car. Among the wide range of functions of the Leopard LS 60/10, it is worth highlighting the " Turbo timer", which allows you to extend the service life of a turbocharged engine and save the car owner's time. To protect the car during a trip, the alarm system provides the function " Anti-Car-Jacking", which allows you to block the engine during a robbery of a vehicle.
Features of Leopard LS 60/10:
|
Turning on/off the security mode with locking/unlocking doors Switching on/off the security mode with and without siren confirmation signals Dynamic control code Control of presence in the coverage area Elegant keychain design Two-level shock sensor Remote shutdown of shock sensor Passive activation of the security mode and automatic return to the security mode Turbo timer mode |
Built-in door lock control relays Two outputs for vehicle light signals Trunk release control Anti-car-jacking function Panic mode Service mode Car search mode PIN code to disable security mode without a key fob |
In previous articles we looked at some brands and modifications of car alarms. Another one of the best security systems for cars is the Leopard alarm system. As usual, we will do a review, analyze the technical characteristics, reviews and comments.
LEOPARD alarm models
The Leopard electronic security system has rich functionality. Main features of this brand:
- no restrictions on car brand (suitable for all brands of cars, motorcycles and scooters);
- The kit includes a connection diagram if the user wants to mount and connect it themselves;
- The Leopard signaling system is protected from external interference, which is very important now, because car thieves or shoplifters have code readers;
- the temperature range of operation is wide, can be used in any climatic zones;
- There are models with auto start, which allows you to start the car engine remotely.
Leopard alarm models:
- Forward;
- LR 435;
- LS 30/10;
- LS 50/10;
- LS 70/10;
- LS 70/10 EC;
- LS 90/10 EC;
- Leo 3.2.
Leopard car alarm instructions
New devices all come with connection diagrams. If suddenly there is no such scheme, then
You should not do the installation until you find instructions specifically for this modification. Also, if you have any doubts about the installation, it is better to have an auto electrician connect it.
Consider the LS 90/10 EC model.
There are 4 option control buttons on the key fob. There are options that are controlled only by the combined action of the keys.
The button with a white arrow “to the left” is used to put the car on protection.
To turn off the car's protection, you need to press the button on the opposite side of the key fob. These buttons are used to open and close car doors.
Also, there are functions that depend on the time you press and hold the buttons.
So, if you press and hold the “left arrow” button for setting the car to protection and hold it for several seconds, the warning zone of the sensor will turn off. To completely disable this controller, you must press the same key twice in a row.
When you press the button with the pattern of a crossed out speaker, the silent security mode is activated.
Another button, the third, is used to control the immobilizer (IMMO).
How to turn on a Leopard car alarm without a key fob
It happens that the key fob is lost or forgotten, or its batteries are dead. In this case, you can also protect the car from opening and theft.
Activating the security system without a key fob:
- Open the driver's door.
- Turn on the ignition.
- Without closing the door, press the emergency shutdown button 3 times.
- The sound signal should sound, the headlights and other optics should blink. After 20 seconds, the sound and blinking lights should repeat.
After this sequence of actions, the car is armed.
Installation and connection
Installing and connecting the Leopard security system is no more difficult than Cenmax, Starline, Tomahawk, Pharaon.
Installation procedure:
- Selecting a location:
- Antenna for radio signal application. It is better to install it as high as possible, but away from metal parts.
- Central block. Can be installed behind the instrument panel. The main thing is that the central locking system is protected from overheating and high humidity.
- Siren. Place for the siren under the hood. Mount the horn with the horn down and away from the engine and hot pipes so that it is protected from overheating and high humidity.
- Shock sensor. The optimal location for the remote control is considered to be the longitudinal axis of the car. Installation is carried out in the cabin.
- Connection:
- Connect strictly according to the attached diagram. The diagrams are clear and easy to read.
- Selecting a location:
Pros and cons
The Leopard alarm system has the following advantages:
- Setting the sensitivity of the shock sensor. The sensitivity threshold is adjusted after installing the shock sensor (closer to the longitudinal axis of the car body). When setting up the installed sensor, slam your palm on the car body and set at what impact force it should trigger. If you set it very sensitively, the alarm will go off at the slightest touch. Hence the so-called false positives.
- The protective system can be effectively operated in areas with cold climates. Suitable for those who live in the Far North.
- If the model has an autostart function, when this option is activated, the car will start the internal combustion engine at a specified time.
- According to reviews, the Leopard car alarm key fob lasts a long time and does not cause problems.
Not all devices are perfect, so there are some disadvantages here too:
- If there are possible problems with the security system, after the engine automatically starts, it will stall.
- It is quite difficult to do installation and connection yourself without experience.
Prices
The Leopard car alarm product line has a wide range in price. Prices for 2018 for various models:
Leopard LS 70 EC – from 2150 rubles.
For that kind of money, the LS 70EC device will have the following characteristics:
- Anti-grabber.
- Programming key fobs.
- Anti-scanner.
- Multifunctional LED.
- State memory.
- Quiet arming/disarming.
- Disabling alarms without disarming.
- Remote shutdown of sensors.
- Disabling the sensor warning zone.
- Re-enabling sensors in security mode.
- Auto search function.
- Arming with an emergency shutdown button.
- Delayed protection mode.
- Automatic repositioning.
- Auto-staging.
- Closing/opening doors when activating/deactivating the ignition switch.
- Bypass the faulty zone.
- Remote control of the central locking (CL) when the ignition switch is turned on.
- Notification about alarm activation.
- Fault notification.
- Checking for two-way communication.
- Anti-Hi-Jack (remote activation; online programming for one trip).
- PIN code.
- Starter interlock relay.
- Output of the status of “-” and “+” door limit switches.
- Hood end cap.
- Trunk limit.
- Control input for brake lights.
- Built-in 2-level shock sensor with remote adjustment.
- Emergency shutdown button.
Additional control channels:
Control output with software selectable function:
- Unlocking the trunk.
- Timer output (2 modes).
- Fixed impulse.
Control output with software selectable function:
- Interior lighting.
- Closing the windows when arming (2 modes).
Programmable functions:
- Closing/opening doors when the ignition is turned on.
- Continuous/pulse mode of operation of the siren output.
- Automatic arming (with or without locking the doors).
- Reactivation of arming.
- Passive immobilizer mode.
- Taking into account the delay of interior light.
- Delayed protection function.
- Pulse duration of the central locking (CL).
- Emergency shutdown of the security system (PIN code).
- Operating mode of additional channel No. 2 (Activation of interior lighting, closing windows).
- Operating mode of additional channel No. 1 (Opening the trunk, 10 sec, 30 sec, fixed pulse - until the button is pressed again).
- Reset to factory settings.
Additional functions of the bidirectional control panel:
- Real time clock.
- Starting temperature.
- Alarm.
- Countdown timer.
- Low battery indicator.
- Vibrating call.
- Display backlight.
- Button lock option.
- Shock sensor sensitivity indication.
Communication range in urban areas:
- By control channel waves – 500 m;
- On the waves of the pager channel - 900 m.
Leopard LS 90/10 ES with auto start costs about 4 thousand rubles.
At the moment, the LS 90/10 EC model has been discontinued. Article 5765, who wants to find it in online stores. 
Equipment
- Main unit of the Leopard LS 90/10EC system.
- Keychain with feedback and LCD display.
- Remote control key fob (RC).
- Transceiver antenna module.
- Two-level shock sensor.
- LED indicator.
- Emergency shutdown key.
- Installation and use instructions.
Characteristics
- Manufacturer: Leopard.
- Type: security system.
- Indicator type: LCD display.
- Warning range: 1000 m.
- Control range: 600 m.
- Communication type: two-way.
- Silent arming/disarming: yes.
- Built-in GSM module: no.
- Built-in GPS module: no.
- Remote engine start: yes.
- Warranty policy.
- Warranty: 1 year.
Leopard LR 433 in the summer of 2018 has a price of 1900 rubles.
Specifications:
- Type: Car security alarm;
- Anti-Hi-Jack: yes;
- Automatic activation of the security function: yes;
- Key fob with LCD display: no;
- Shock sensor: yes;
- Feedback: no;
- Range from the vehicle to the main key fob: 800 m;
- “Panic” option: yes;
- Automatic window closing function: yes;
- Immobilizer function: yes;
- Possibility of protecting a car with the internal combustion engine running: no;
- Car search function: no;
- Anti-grabber option: yes;
- Anti-scanner option: yes;
- Relay for controlling door locks: yes.
Video
This video is a review of the Leopard NR 300 model, which helped some owners figure it out.