Lamps: home-made for apartments and streets. DIY lampshades for chandeliers: original ideas and decorating workshops Unusual DIY ceiling lamps

The lighting system is an integral attribute of the design of any room. This can be explained by the fact that chandeliers and lamps have an amazing ability to change the environment. Of course, the easiest way is to purchase lamps in a store. But it’s much more pleasant to make them yourself.

Materials that can be used to create chandeliers

What can a chandelier be made from? The answer to this question is: “Yes, from anything.” You can make a pendant lamp from:

• paper;
• thread;
• CDs;
• plastic bottles"
• cardboard;
• natural materials;
• kebab sticks, etc.

Your imagination will help you choose the material. She will also help you choose the right model. To create a chandelier, you can use techniques such as origami, carving, and embossing. In addition, it is appropriate to use knitting and weaving techniques.

Lamp made from kebab sticks

Let's look at step-by-step instructions on how to make an original chandelier using ordinary kebab sticks.

You will need:

• kebab sticks;
• organza ribbons;
• glue.

It is quite easy to make such a design:

We lay out the sticks so that they form a square and connect them with glue. The height of the chandelier depends on your preferences. But remember that you need to take into account the total amount of material available and the height of the ceiling.

We seal the top of the lamp with cut sticks. They can be laid parallel to each other or crosswise. Don't forget to leave a hole of the appropriate diameter for the cartridge in the central part.

After the glue has dried, we begin to decorate the chandelier. For this purpose, we tie colored organza ribbons at the protruding ends of the sticks. The more of them there are, the more beautiful the lamp will turn out.

We hang the resulting structure on a hook in the ceiling. This can be done using the same ribbons. Next, we fix the cartridge in it. The chandelier is ready!

Bottle chandelier

One of the original ideas for homemade chandeliers is a bottle chandelier. You will need:

• frame of an old chandelier;
• plastic bottles (the color palette can be very different);
• thick steel wire.

Creation instructions:

Cut the bottles. Cut out flowers, animals or geometric shapes from them. Which one to choose depends on your desire.

Attach the cut pieces to the frame of the old ceiling lamp and attach the steel wire. You need to make a “hedgehog” out of it.

To do this, you need to take several wire rods and connect them in the middle using a small piece of wire. Next, you need to cut off the top rod, thereby creating a place for the light bulb.

The last stage is connecting the chandelier to the ceiling. It's not that difficult to do it yourself. This lamp would be appropriate in the hallway or kitchen.

Wooden chandelier

To make a beautiful LED chandelier from wood with your own hands, you need to prepare the following things:

• Wooden planks – 12 pcs. Door frames will fit. It is optimal if they have a length of 0.3 - 0.45 m.
• Glass jars with a volume of 1 l – 6 pcs. They will be used as lampshades.
• Wood paint.
• Self-tapping screws.
• A machine for seaming homemade canned goods.
• White paint.
• Sandpaper.

Creating a wooden chandelier will require the following steps:

• You need to sand the planks using sandpaper.
• Make groove holes for the wire.
• Drill holes for mounting lampshades. To do this, take three planks and make a hole on each side.
• Cover the workpieces with paint that imitates natural wood.
• Assemble the planks using self-tapping screws into a single hexagonal structure.
• Make holes for the cartridge in the central part of the screw caps. Install sockets with LED bulbs.
• Roll up the cans.
• Paint the lids with tone paint, and the jars with light shades of paint. All that remains is to fix the structure to the ceiling.

Cardboard product

A chandelier made of ordinary cardboard can become a very unusual interior decoration. Here is a small master class:

• Using a stencil, cut out two identical pieces. Don't forget to make slots to secure them in the center. Connect the cut out parts.
• If necessary, paint the resulting structure.
• To give greater strength, sew all joints with strong thread or wire.
• Attaching to the ceiling occurs on a chain. The wire runs through them. It is optimal if they are painted to match the lighting fixture.

You can use a variety of things as decoration - glitter varnish, beads, sequins, lace, rhinestones, artificial flower arrangements, beads.

A plastic chandelier is made in the same way. This product will be more durable. But scissors will not be the best option for making it. It is preferable to use a jigsaw instead.

Today, the popularity of hand-made interior parts is only growing. A handmade chandelier is a reflection of your personality. It will give the whole atmosphere originality and uniqueness.

On the Internet you can easily find not only many different variations of homemade lamps, but also detailed instructions for repairing do-it-yourself chandeliers.

DIY photo of chandeliers

Making decorative items yourself is a creative and interesting process. It’s not at all difficult to make wall lamps with your own hands, which can beautifully complement the interior of the room, giving it, in addition to additional lighting, comfort and homely warmth. The convenience of making such crafts also lies in the fact that it does not require large material costs for the purchase of material. So, for example, you can make a wall sconce with your own hands even from improvised means that can be found in every home. In our article we will look at examples of independent design of wall lighting fixtures with examples of photos of finished samples.

DIY wall lamps: what you need to make

In order to make a sconce with your own hands, you need tools, a base, an electrical wiring system with a base and a bulb, and materials for the lampshade.

As for the tools, we will not list a huge number of everything that may be needed in one case or another, but we will only say about the main ones that will be useful in one way or another, namely:
stationery (pencil, rulers, eraser, possibly a compass);

• roulette;
• jigsaw or fine file;
• a drill with drills to install a wall sconce with your own hands;
• a heated glue gun (it glues a variety of materials much more firmly than any other);
• scissors;
• paint or colored spray can.

DIY wall lamp: making a frame

The basis for the lamp will be a round or square board cut from an MDF sheet. It should have the dimensions of the future sconce with your own hands (photos are presented in the article). It is also necessary to make slots in the base for installing light bulb sockets. Their number will depend on how bright the lighting should be. When making slits, be sure to take into account the thickness of the bulbs in order to correctly calculate the distance between them.

It is also necessary to cut out the sidewalls for the perimeter of the base, and make a small gap in the bottom of them in order to pass the electrical wire. The sides are fastened with self-tapping screws, the places of the caps are covered with putty. It is advisable to use sandpaper to ensure even grouting.
DIY wall lamps can include color design. The entire frame can be initially coated with a primer, which will ensure a long service life and painted in the desired color.

Fasteners or hooks are installed on the back of the side parts, with the help of which the lamp will be mounted to the wall.

We equip the lamp on the wall with our own hands with electrical wiring

For electricity supply equipment, you will need a power cord with a plug and a switch (you may have to buy one or use one left over from a non-working lamp). The socket can also be removed from obsolete lighting fixtures.

DIY wall lamps, or more precisely, their lampshades, are often made of flammable materials such as fabrics, paper, threads, etc. In order to avoid fire, it is worth using energy-saving fluorescent light bulbs, which have high luminous efficiency with low heating.

Light bulbs with sockets are attached to the finished frame, the wire is routed through the equipped hole. At this point, we can assume that the DIY wall lamp is half ready. Now it’s time to start making the lampshade.

DIY lampshade for sconces from scrap materials

There are many methods here using materials such as wood (various twigs), fabrics, threads, etc. It is imperative to have a wire that can hold its shape well for a long time, but at the same time bend well.

DIY wooden wall lamp

After pruning large trees, various branches and snags remain, which can be successfully used to decorate wall lamps with your own hands. The photos show how a seemingly ordinary piece of driftwood turned into an elegant sconce. To do this, all I had to do was cut and sand the points, and make a hole inside for the electrical wire.

Another way to make a spectacular sconce out of wood with your own hands is to decorate it with grapevine branches, arranging them in different sequences. This lamp will become a real decoration for a room in eco style.

Beautiful DIY wall lamps (photos below) can be made from wicker. They can be made in different weaving methods, but for beginners it’s worth starting with simple designs.

DIY sconce with thread lampshade

It is quite easy to make such a lamp for the wall with your own hands. To do this, you need to have a thick thread of any color (you can take white and paint the finished structure in the desired color), PVA glue and a balloon. The technology is very simple. First of all, we inflate the ball to the size that the lampshade should have and tie it tightly. We first soak the threads in glue, and then, having attached the tip to the base, we begin to wrap them around the ball in a chaotic manner. The winding density can be anything, it all depends on how bright the lighting should be emitted by the DIY wall sconce.

Having finished the winding, you can once again coat the entire workpiece with glue with a brush and hang it to dry. We remove the ball from the completely dried workpiece - to do this, it must first be burst. The lampshade is ready. If necessary, it can be painted in any color using spray paint. It is noteworthy that with such a do-it-yourself sconce (photos are presented in the article) you can emphasize any interior style, depending on the color of the lampshade: white will suit minimalism, black will highlight high-tech, bright yellow or red will complement modernism, etc.

Find out how to make a lamp out of wire and mesh so that flowers can grow inside it. How to turn a snag into a lamp, and tree branches into a floor lamp?

How to make an original lamp?

A very interesting design item is made from the simplest materials, most of which are left over from a picnic. If you go out with friends or family, you definitely need to clean up the trash after you. This not always desirable task will be made more enjoyable if you ask to stack the plastic spoons separately. If you have children with you, arrange a competition to see who can throw the most spoons and the fastest into a separate trash bag or bag.

You will also need water cans. After a fun picnic, when you arrive home, some time later, you can make original lamps from the containers left over after the feast. Give them to friends, keep them for yourself to hang in the hallway, kitchen or garden.

So, here’s how to create such a chandelier with your own hands or with the help of your family. First put next to each other:

• 5-liter oval-shaped plastic bottle;
• disposable plastic spoons;
• cable with socket and plug;
• low power LED light bulb;
• pliers;
• glue gun;
• screwdriver;
• stationery knife.

To prevent such original lamps from leading to a fire, take an LED rather than a regular Ilyich light bulb.

For information: 4–5 W of LED bulbs correspond to 40 W, and 8–10 W correspond to 60 W of conventional electric ones.

Carefully, so as not to cut yourself, remove the bottom of the canister with a knife.

Also, observing safety precautions to avoid injury, cut off the handles of each plastic spoon completely. Apply a little hot glue from a gun to the cut edges of the “blades” and glue them to the bottom tier of the bottle. Usually 17 pieces go here. Then, overlapping, attach the second and subsequent rows, arranging the elements in a checkerboard pattern.

To cover the neck, glue 10-12 spoon blades together, forming them into a ring.

Pass the socket with the light bulb and cable through the cut bottom hole in the bottle. If this "electrical" part is a problem for women, call your husband. If you don't have one, buy a cable from a hardware store with a socket and plug already screwed to it. You can borrow this working part of the lamp from an old one.

Place a “ring” of spoons on the top of the canister and screw on the lid. To do this, let your husband drill a hole in it with a drill, and you yourself can do this manipulation with a hot nail or self-tapping screw, holding it with pliers. The original lamp is ready.

3 models of designer lampshades with your own hands

Ideas are in the air. If you are at the dacha and don’t have this piece of furniture there, it’s easy to make it yourself from what you have on hand. Take:

• hollow dishes;
• wire;
• polyurethane foam;
• gloves;
• paint;
• brush;
• pliers.

You can use unexpected things as a base: an old saucepan, a flowerpot, an already unnecessary children's potty.

Turn any of these auxiliary items over and place them upside down on a flat surface. Wind the wire, its turns repeat the shape of the future product, they should be the same as the lampshade. With your own hands, but wearing gloves, take the can in your hands, squeeze the foam out of it little by little onto the frame, covering the wire, let it dry.

After this, use a knife to make the contours more even, cutting off the excess. Paint it in your favorite color, white looks airy and elegant. Such a lampshade, made with your own hands, will decorate a summerhouse. You can make a few and hang them here. By avoiding big expenses, this way you decorate the space.

This lampshade looks stylish and modern, while the next one has a classic look. For it use:

• thick wire;
• pliers;
• small plastic bottle of water.

Let's start making a lampshade with our own hands by making the top central element. To do this, wind 1 turn of wire onto the bottle, remove it, cut off the excess, twist the ends to make a ring. Its diameter should be such that the cartridge can be threaded through from below, and it will stay on the ring and not come out through the top.

Now roll the wire into a large outer ring. We will fasten it. To do this, cut 4 identical pieces of wire with pliers, secure the first end of each to the small ring, and the second edge to the large ring. The upper part of the lamp is ready.

The dimensions of the lampshade depend on whether it is being made for hanging from the ceiling or for a table lamp. The first one is larger than the second one.

Roll the bottom ring from the wire; it is the largest. Connect it to the second top five pieces of wire, distributing them evenly. All that remains is to decorate the frame of the lampshade. To do this, pass the wire through the second ring, curling it into waves and twisting it through the base. Also design the second ring.

All that remains is to cover it with fabric. Attach a flap from the second top to the bottom ring, cut to size, adding to the seam. Trim the large sides of the resulting rectangle. Sew the fabric on the side directly on the frame, decorating this place with braid. That's it, you've made a wonderful lampshade with your own hands.

If you want to get acquainted with the most modern ideas on this topic - please! In skillful hands, the construction mesh will turn into a stylish lampshade.

With your own hands or by calling a man, cut a rectangle from it with metal scissors. To secure the socket, twist a circle out of wire and secure it on top of the lamp with four pieces of wire.

If you don't have coarse mesh, use pliers to trim off the excess sections to create more space between the wire strips. Paint the lampshade and the frame is ready.

And now the magic begins. You can make an original lamp that will benefit not only people, but also plants. Attach a flower pot with a flower at the bottom of the lampshade. You can tie it, woven using the macrame technique, to the lower turns of the wire with a thick rope. Check that the fastening is secure.

If there is a man in the house and a welding machine, call on this tandem to make a metal ring with “beams” that need to be welded to the bottom of the lamp.

If you have a indoor climbing plant, such as ivy, thread its vines between the meshes of the lattice. The original lamp will become a house for a flower. It is better not to use ordinary light bulbs, as they are very hot and can burn plant leaves. In addition, the air around the flowers will be too hot. Screw in an LED or fluorescent light bulb.

For such an original lamp, you needed:

• construction mesh or strong wire;
• brush and paint (optional);
• pliers;
• light bulb with socket;
• flower.

You can secure cups with seedlings well on such a lampshade, thereby finding additional space for growing them and conditions for lighting in the evening.

We make a floor lamp and a table lamp with our own hands

While walking in the forest, do not pass by a florid piece of driftwood lying around. Put it in a bag and take it with you. Wash it at home, if there is bark, peel it off with a knife. Sand the surface with fine sandpaper if necessary. Cover with wood varnish.

In order for the table lamp to hold well, the driftwood must be screwed to a durable pedestal with self-tapping screws. It should be quite heavy. Oak is suitable for it. If you find a broken branch of this tree in the same forest, saw off a circle 5–7 cm thick from the thick part.

It will also need to be sanded and varnished. When these wooden blanks are dry, connect them with self-tapping screws of sufficient length, first passing them through an oak stand and then driving them into the driftwood. You can also use bolts and nuts.

You already know how to make a lampshade with your own hands. Therefore, make it and attach it to the driftwood, wrapping it with wire.

If the old floor lamp stand is no longer pleasing or you just want to decorate it, also use wood for this. Look how good the birch stands look. Attach a branch of this tree to the lamp and see what kind of floor lamp you could make with your own hands.

How to crochet a lampshade?

If you are tired of the old floor lamp, you can transform it with your own hands, giving it a “zest”. Take the openwork braid and sew it onto the top and bottom of the fabric lampshade. You can decorate with glitter by gluing them in the form of a pattern, evenly or randomly.

A floor lamp or chandelier will turn out unique if you knit a lampshade for it with your own hands. This can be done with crochet or thin knitting needles. For the first option, you will need:

• hook;
• cotton threads;
• pattern for knitting a napkin;
• water;
• starch;
• ribbons.

You can use, for example, this pattern for a napkin.

Measure the top circumference of the lampshade, we need its diameter. Knit a chain from air loops. Next, knit in the round, based on the napkin pattern. Measure the height of the lampshade and the diameter of its bottom circle. Based on this data, draw a trapezoid or rectangle (depending on the shape of the lampshade). Crochet this figure. Sew to the side.

Using single crochets, tie the top circle of the lamp and this trapezoidal or rectangular part.

Boil a glass of water, stirring, pour in 200 ml of cold water, in which 1.5 tbsp is diluted. l starch. Boil for 1 minute, remove from heat, cool. Place a knitted lampshade here, wet it well, then wring it out, let the water drain, and the fabric will dry, but remain slightly damp.

Place it on the lampshade. To ensure that the knitted lampshade holds well, you can pass several ribbons or ribbons between the loops and tie them.

Lampshades look very beautiful if they are decorated with crocheted flowers.

A solution of starch or PVA will help give the shape of a knitted lampshade. Put it on the frame, apply glue, let dry.

In the second case (when knitting needles are used), you need to make calculations for knitting, draw a pattern based on the measurements of the lamp, and knit a trapezoidal or rectangular lampshade. Similar models are suitable for floor lamps and chandeliers of strict shape. If you need to crochet a semicircular lampshade, first make wedges and then connect them with single crochets.

Here is another openwork chandelier. It’s nice to make muslin with your own hands and decorate the bottom of the product in a circle. But first you need to create the lampshade itself. The crochet pattern for this beautiful thing is presented right there.

A table lamp will look amazing on your bedside table if there is a lampshade like this on it, the knitting pattern for which is also given.

If your son or daughter won’t let you finish your work, demanding your attention, invite the children to make a lampshade too, and let them roll strips of paper into tubes with their own hands. It’s better to wrap them around a thin pencil or a wooden sushi stick, and then glue the free edge so that it doesn’t unravel.

Now you need to glue the resulting blanks, using an object of a suitable shape as a frame, for example, a 5-liter canister. Having made the first inner layer, let the child move on to the second. There should be several of them to close the gaps. When the PVA has dried, cover a table lamp with this lampshade or hang it from the ceiling. It looks original and extravagant.

If you are interested in other ideas on this topic, watch the video:

A very interesting version of a lamp made from disks:

Lamp - an extremely practical item, because unlike a bulky chandelier, it is very compact and can be located anywhere, even on the floor. In the process of creating an interior, it is often forgotten because it plays a secondary role. However, in the setting of a small apartment or room, it will be almost indispensable, and will also help add coziness and warmth to the room. In modern lighting equipment stores you can find a lamp for every taste, but isn’t it more interesting to create it with your own hands? In this article we will tell you how to make a beautiful and unusual lamp using completely ordinary materials that are found in every home.

1. Garland lamp

To create such a lamp you will need a wire base, fishing line, paper or plastic bottles, as well as patience, patience and more patience.

You need to create a frame of the required shape from wire, and cut out circles or figures from paper or bottles. Next, you either simply attach them to the wire itself with glue, or string them on a fishing line. The thinner the line, the more weightless your design will be, so from a distance it will seem that your butterflies are “fluttering” on their own.

2. Lamp made of beads

To create such a product you will need wire and, if desired, fabric. In a simpler version, you simply string multi-colored beads onto a wire and bend it in a chaotic manner. Then a regular light bulb is fixed in the center.

If your soul desires something softer, with an oriental flavor, you can create unusual lampshades made of fabric, decorated with beads. For this, you will need old CDs, to which you will attach both fabric and beads strung on the same wire – an irreplaceable element, stock up on it in abundance!

The fabric should be translucent: organza or tulle will do. It is stitched from one edge and secured only at the top. Then you can string wire with beads onto it. Please note that it is better to choose transparent or “chameleon” beads, otherwise they will look too gloomy when the light bulb is lit. Instead of a light bulb, you can place a flickering New Year's garland inside the lamp: this way you will create a festive atmosphere in the room.

3. Cloud lamp

An incredibly cute and gentle option that is suitable for both children and adults. It may seem that it is quite difficult to perform, but this is not at all the case.

To create it, you only need a paper “Japanese” lantern, cotton wool and a lot of glue. A large amount of cotton wool is glued onto the lantern to create a lush lump. Additionally, it can be decorated with pendants in the form of stars, crescents or raindrops. That's all, actually.

It’s better if the cloud is held on a thin line, - this way you will create a weightless effect in the room. This is a great theme party idea, so grab some cotton wool and get going!

4. Lamp-lock

This solution is suitable for those who, as a child, loved to cut out pictures from magazines. A surprisingly simple lamp that will create a mysterious, almost mystical atmosphere in the room.

You will need to find a photograph (or print a picture) of an ancient castle, carefully cut it out and roll it into a kind of tube. Then secure the structure with tape and place a small light bulb inside. On dark evenings, your castle will be illuminated from the inside, and mysterious shadows will flicker against its background... well, how can you not tell a scary fairy tale? You can also cut out “windows” in the castle through which light will pour out.

5. Lamp made from old things

Old dishes, pieces of furniture and even old, shabby lamps are found in every home. It's good that you didn't throw them away, because now they will function again, you just need to decide on the style. In some cases, you don't even have to decorate anything, you just need to place the lamp (or what's left of it) in a suitable environment.

Most often, the matter is limited to a drill or glue with a death grip. Such lamps can be placed in any part of the apartment, the main thing is to observe the general compatibility.

And a few final tips:

1. Use only energy-saving light bulbs in lamps! You don't want to see flames Are you in the place where your beautiful creation was just?

2. Make sure that the material you choose does not hide the light – after all, first of all, the lamp should illuminate and only then decorate the room.

3. Don't be afraid to experiment, you will succeed! Who knows, maybe there might be a decorative designer dormant in you? It's time to wake him up!

Photo: homedit.com, millax.com, museum-design.ru, idejnik.ru, reduktor-union.ru, happy-giraffe.ru, magdekor.ru, secondstreet.ru, decorateme.com

People who have developed creative abilities very often create interior elements with their own hands, and making a master class chandelier is not difficult. Only it is better to buy factory-made lamps for the bathroom, because they must be small and reliable.

Homes containing handmade items take on a sophisticated and original look.

We make a chandelier with our own hands from plastic bottles

To make a chandelier from plastic bottles we take:

• If you have an old chandelier, you can take its island
• Many colorful bottles
• No more than ten steel rods

1. From plastic bottles we use scissors to cut out any figures that you want to see on your chandelier (animals, flowers, etc.)
2. We attach several twigs to the chandelier island. From the rest we make something similar to a hedgehog, connecting the rods in the middle. We remove one rod where the light bulb will be
3. Next, we supplement the resulting frame with previously cut plastic figures
4. We connect the island and the hedgehog together.

Now you know how to make a plastic chandelier with your own hands. To consolidate the material, we recommend that you watch a video that contains examples of chandeliers made from plastic bottles:

Making a chandelier with your own hands from wood

To make a wooden chandelier we will need:

• Twelve strips for door trim, 30-45 cm each.
• Liter jars from which we will make lampshades (6 pieces).
• White and wood-colored paint.
• Self-tapping screws for wood.
• Sandpaper.
• Seaming machine.

Description of the manufacturing principle.

1. Making the planks smooth using sandpaper
2. We need room for the electrical wire, so we make a notch on the back of each strip.
3. We drill three strips to which we will attach the shades.
4. We paint the planks a wood color.
5. We make a regular hexagon from the plans.
6. We attach the cartridge to the hole in the lid.
7. We roll up the jars with light bulbs inside.
8. We paint the lampshade in any light color.

DIY chandelier made of wood, photo below:

Making a chandelier with your own hands from threads

To make a chandelier from nylon threads we take:

• Let's make a lampshade from a plastic bowl
• Multi-colored threads
• Fastening paste

Description of the manufacturing principle.

1. First of all, let's make the paste. Mix half a glass of flour and two glasses of water, two glasses of water with a temperature above 60 degrees, boil and throw in about three tablespoons of sugar. Stir and wait until it cools down. Next, we’ll look at how to make a lampshade with your own hands for a chandelier.
2. Throw the yarn into the paste.
3. We wind the resulting yarn around a bowl.
4. After 24 hours, separate the resulting thread lampshade from the bowl.
5. We attach the lampshade to the bottom and that’s it, the chandelier can be hung on the ceiling

Attention! A DIY lampshade for a chandelier requires the use of a light bulb of no more than 60W, as it is made of flammable materials.

Have you decided to change your interior and want something unusual? The store offers a huge selection of different things, but why not make something yourself? The designer lives in each of us, you just need to wake him up, change the world that surrounds you, make it the way you see it!

Why not start with a chandelier? It can become the calling card of your home that no one else has. This will not only save your money but also give you a sea of ​​unforgettable emotions.

Make a chandelier shade with your own hands. You will be surprised that things that you were ready to throw away can be useful to you and reborn in your new invention.

First you need to decide on the style of what kind of chandelier you want.

If you are young - a chandelier in a romantic style is for you, you need to decorate a country house - country style will be just right.

DIY chandelier (photo based on lampshade decorations)

To make a chandelier with our own hands, we take:

• Light bulb socket.
• Power cord.
• Frame for a chandelier.
• Decor for jewelry.
• Multi-colored threads.
• Hot glue.
• 60 Watt light bulb.

For the frame, what's left of your old, long-forgotten chandelier is suitable. Many famous designers began their illustrious careers by giving old items a shine, bringing them back to life and putting them up for sale.

Take measurements and decide on the fabric you will use. After sewing the cover of the required size, place it on the frame. You can decorate the lampshade however you like. These can be cut out flowers, animals, figures, beads and much more that your imagination can reproduce. We attach a socket equipped with a low-power light bulb to the lampshade and everything is ready. A lampshade made by yourself will lift your spirits every time you look at it.

Making a New Year's chandelier with your own hands

How to make a New Year's chandelier with your own hands to surprise your friends with your suddenly discovered talent?

To make a chandelier we take:

• Organic glass or thin wooden sheet.
• Linen rope.
• Multi-colored balls.
• Small stapler.
• We use glass parts left over from an old chandelier.

Description of the manufacturing principle.

We start by cutting a square from plexiglass, the dimensions of which are 50:50 cm. We make holes every 5 centimeters throughout the entire area, as chaotically as possible. We take a linen thread and thread it through the water hole and out into another, adjacent one. The length of the extended ends should be two meters. We repeat this procedure until we fill all the holes in the square.

We hang this composition on the ceiling instead of a chandelier and continue to decorate the chandelier like a Christmas tree. We take the balls and tie nylon threads of different lengths to them, and tie them to the structure, concentrating them in the central part. Next, we perform the same operation with glass products, but we hang them at the edges; the length of the thread should be less than on the balls. If you look at the structure as a whole, it will look like an inverted pyramid.

Now you know how to make a New Year's chandelier with your own hands. Start your crafts right now and you won't stop with the chandelier.

Recently, chandelier decorations such as thread wrapping have become very fashionable.

Description of the manufacturing principle.

We will need a lot of thread and PVA glue, as well as an inflatable ball. Cotton threads are perfect for our project, since the glue applies evenly to them and behaves obediently.

We wrap the inflated ball with threads, apply glue and wait until it dries. Then we simply pop the ball with a needle. Cut a hole on top for the light bulb and you're done. Your result can be compared with the DIY chandelier in the photo.