Cables must be supplied on wooden drums (GOST 5151-79) with a diameter of at least 40 nominal outer diameters of the cable. The lower end of a cable with a length of at least 2.0 m must be brought out to the drum cheek, which must be protected from external mechanical influences. The ends of the cable must be sealed tightly. The cable drum must have a continuous casing.
Weight and overall dimensions of standard drums:
Drum type | 8 | 8a | 8b | 10 | 10a | 12 | 12a | 14 | 14a | 14b | 14g | 16 | 16a | 17 | 18 | 18a | 20 | 20a | 20b |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
L, mm | 230 | 400 | 500 | 500 | 600 | 500 | 710 | 710 | 500 | 600 | 1000 | 600 | 900 | 750 | 900 | 900 | 1000 | 1060 | 1000 |
d, mm | 450 | 450 | 450 | 545 | 545 | 650 | 650 | 750 | 900 | 1000 | 1000 | 800 | 800 | 900 | 1120 | 900 | 1220 | 1000 | 1500 |
D, mm | 800 | 800 | 800 | 1000 | 1000 | 1220 | 1220 | 1400 | 1400 | 1400 | 1400 | 1600 | 1600 | 1700 | 1800 | 1800 | 2000 | 2000 | 2000 |
Weight*, kg | 34 | 36,5 | 36,5 | 39 | 55 | 99 | 107 | 165 | 152 | 186 | 202 | 241 | 237 | 277 | 422 | 422 | 584 | 555 | 720 |
* the weight of the drums is given without taking into account the casing and may vary depending on relative humidity air and storage conditions.
Capacity of standard shipping containers.
Container | Drum type | ||||||
---|---|---|---|---|---|---|---|
8a | 10 | 12 | 14 | 16a | 17a | 18a | |
3 t | 4 | 3 | 2 | 2 | 1 | 1 | 1 |
5 t | 7 | 4 | 3 | 3 | 2 | 2 | 2 |
20-24 t | 24 | 15 | 8 | 7 | 6 | 6 | 6 |
External dimensions and weight of standard shipping containers
Cargo containers
Sea and rail cargo containers have a fairly robust design and provide multiple transportation without intermediate unloading by several modes of transport.
. Drum design in accordance with GOST 5151-79, size data is given in the table below. The drum number corresponds to the cheek diameter in decimeters.
To protect the outer turns of a cable or wire, wound on a drum To protect against mechanical damage during transportation and storage, drum lining or packaging with mats is used.
Main traditional way sheathing consists of placing a continuous row of boards on the edges of the cheeks and fastening them with nails through a steel strip that fits the sheathing along the edges.
Dimensions of sheathing boards and steel tape are indicated in the table. In permitted cases, partial cladding can be performed, in which the gaps between the boards are no more than 50% of their width.
Overall dimensions of cable drums.
Reel numbers | Height, mm | Width, mm | Square, m? | Volume, m? | Drum weight, with casing, kg | Drum weight, kg |
17v with timber | ||||||
18i with timber | ||||||
20v with timber |
Our company produces and sells wooden cable drums 16. By purchasing cable drums No. 16 from us, you receive:
- High quality product from the manufacturer and therefore low prices;
- possibility of purchasing from 1 reel;
- the ability to make a drum according to your dimensions;
- flexible system pricing and maximum discounts for your order volume;
- free shipping;
Cable drum sizes 16
- A - cheek diameter;
- B - drum width;
- C - neck diameter;
- D - neck length;
- E is the diameter of the axial hole.
- F - stud diameter
- G - cheek thickness
Cable drum size chart 16
In accordance with GOST 5151-79, all wooden cable drums are used for cables with voltages up to 10 kV. Drums are made from softwood lumber or soft larch trees: alder, poplar, willow, linden, aspen (with the exception of birch).
Design parameters protective materials for cable drum 16
To protect the cable coils on the drum during transportation and storage, the drum is covered with boards secured with steel tape or laid with mats.
It is permissible to cover drum No. 16 through a board with a thickness of at least 25 mm and a width of no more than 250 mm, while the sum of the gaps between the boards should not exceed 50%. For reliability, the casing is fastened with steel tape 0.3-0.5 mm thick and at least 25-35 mm wide. According to GOST, mats are made from planks or obapola. Today, manufacturers use mats as modern materials, films, polyester materials, etc., reducing the risk of damage to the cable sheath and cores.
Standards for winding cable on drum 16
Maximum length The length of cable that can be wound on a drum depends on the diameter of the cable itself. The calculated data is shown in the table below.
Price for cable drum 16
OOO Cable systems offers to its clients favorable price depending on order volume. Our production can provide customers with the required products in in full and in a short time. Cable drums No. 16 are sold from 1 unit.
Payment methods
Payment for goods is carried out by bank transfer.- Cashless payment Delivery will be made within 1-2 days after receipt cash to our bank account.
Delivery
Our company has its own fleet of vehicles. Delivery is carried out on weekdays from 9-00 to 20-00.
If you want to pick up your cable yourself, you will need to contact our managers to coordinate the shipment time.
When ordering more than RUB 150,000. Delivery within Moscow and the region (30 km from the Moscow Ring Road) is free!
Wooden drums designed for winding and transporting cables and wires. Currently, they are the main type of packaging for cable products. The design of the drums in accordance with GOST 5151-79 is shown in the figure, and the size data is given in the table. The drum number corresponds to the cheek diameter in decimeters.
To protect the outer turns of cable or wire wound on a drum from mechanical damage during transportation and storage, drum lining or packaging with mats is used.
The main traditional method of sheathing is to place a continuous row of boards on the edges of the cheeks and fasten them with nails through a steel strip that fits the sheathing along the edges.
The dimensions of the sheathing boards and steel tape are shown in the table.
In permitted cases, partial cladding can be performed, in which the gaps between the boards are no more than 50% of their width.
Dimensions and weight of drums (wooden with lining)
Drum number | Drum dimensions, mm | Estimated weight of the drum with casing, kg | |
---|---|---|---|
Height | Width | ||
8 | 840 | 350 | 51 |
8b | 840 | 620 | 53 |
10 | 1040 | 646 | 56 |
12 | 1260 | 660 | 132 |
12a | 1260 | 864 | 151 |
14 | 1440 | 875 | 217 |
17 | 1750 | 944 | 367 |
18 | 1850 | 1120 | 535 |
20 | 2064 | 1250 | 763 |
Design parameters of wooden drums
Drum number | Dimensions, mm | Number of studs, pcs. | ||||||
---|---|---|---|---|---|---|---|---|
Diameter | Neck length, l | Thickness | ||||||
cheeks, Dsch | necks, dsh | axial hole | studs | cheeks, s | details | |||
5 | 500 | 200 | 35 | 12 | 230 | 38 | 16 | 3 |
6 | 600 | 200 | 35 | 12 | 250 | 38 | 19 | 3 |
8 | 800 | 450 | 50 | 12 | 230 | 38 | 19 | 4 |
8a | 800 | 450 | 50 | 12 | 400 | 38 | 19 | 4 |
86 | 800 | 450 | 50 | 12 | 500 | 38 | 19 | 4 |
10 | 1000 | 545 | 50 | 12 | 500 | 50 | 22 | 4 |
10a | 1000 | 500 | 50 | 16 | 710 | 50 | 22 | 4 |
12 | 1220 | 650 | 70 | 12 | 500 | 50 | 22 | 4 |
12a | 1220 | 650 | 70 | 16 | 710 | 50 | 22 | 4 |
12b | 1220 | 600 | 70 | 12 | 600 | 50 | 22 | 4 |
14 | 1400 | 750 | 70 | 16 | 710 | 58 | 28 | 6 |
14a | 1400 | 900 | 70 | 16 | 500 | 58 | 28 | 6 |
14b | 1400 | 1000 | 70 | 16 | 600 | 58 | 28 | 6 |
14v | 1400 | 750 | 70 | 16 | 710 | 70 | 28 | 6 |
14g | 1400 | 750 | 70 | 16 | 900 | 58 | 28 | 6 |
16 | 1600 | 1200 | 70 | 16 | 600 | 58 | 30 | 6 |
16a | 1600 | 800 | 80 | 16 | 800 | 58 | 30 | 6 |
17 | 1700 | 900 | 80 | 16 | 750 | 70 | 28 | 6 |
17a | 1700 | 900 | 80 | 16 | 900 | 70 | 28 | 6 |
18 | 1800 | 1120 | 80 | 20 | 900 | 80 | 36 | 6 |
18a | 1800 | 900 | 80 | 20 | 900 | 80 | 36 | 6 |
18b | 1800 | 750 | 80 | 20 | 1000 | 80 | 36 | 6 |
18c | 1800 | 900 | 80 | 20 | 730 | 80 | 30 | 6 |
20 | 2000 | 1220 | 80 | 20 | 1000 | 90 | 36 | 6 |
20a | 2000 | 1000 | 80 | 20 | 1060 | 90 | 36 | 6 |
20b | 2000 | 1500 | 80 | 20 | 1000 | 90 | 36 | 6 |
22 | 2200 | 1320 | 100 | 20 | 1000 | 118 | 46 | 8 |
22a | 2200 | 1480 | 100 | 20 | 1050 | 118 | 46 | 8 |
226 | 2200 | 1680 | 100 | 20 | 1100 | 118 | 46 | 8 |
22v | 2200 | 1320 | 100 | 20 | 1100 | 118 | 46 | 8 |
25 | 2500 | 1500 | 120 | 24 | 1300 | 130 | 56 | 8 |
26 | 2650 | 1500 | 120 | 24 | 1500 | 140 | 56 | 8 |
30 | 3000 | 1800 | 150 | 24 | 1800 | 180 | 56 | 10 |
30a | 3000 | 2500 | 150 | 24 | 1700 | 96 | 46 | 10 |
Dimensions of sheathing boards and steel tape, mm
Mat sizes, mm
Mat number | Drum number | Board thickness (not less) | Width of boards (no more) | Nominal mat width | Wire diameter (not less) | Width of steel strip |
---|---|---|---|---|---|---|
M-200 | 5; 6; 8 | 16 | 100 | 200 | 1 | 25-35 |
M-350 | 8a | 16 | 100 | 350 | 1 | 25-35 |
M-450 | 14a; 86; 10; 12 | 19 | 100 | 450 | 1 | 25-35 |
M-550 | 126;146;16 | 19 | 150 | 550 | 1 | 25-35 |
M-650 | Yua; 12a; 14;14v | 19 | 150 | 650 | 1 | 25-35 |
M-700 | 17;18v | 19 | 200 | 700 | 1 | 25-35 |
M-750 | 14g;16a | 19 | 200 | 750 | 1 | 25-35 |
M-800 | 17a; 18;18a | 22 | 200 | 800 | 2 | 25-35 |
M-900 | 20; 206;22;186 | 22 | 200 | 900 | 2 | 35-45 |
M-1000 | 20a;22a;226;22v | 22 | 200 | 1000 | 2 | 35-45 |
M-1200 | 25 | 22 | 250 | 1200 | 2 | 35-45 |
M-1400 | 26 | 22 | 250 | 1400 | 2 | 35-45 |
M-1700 | 30 | 22 | 250 | 1700 | 2 | 35-45 |
Lengths of cables or wires that can be wound on drums, m
Cable diameter, mm | Drum number | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5 | 6 | 8 | 10 | 12 | 14 | 16 | 17 | 18 | 20 | 22 | 25 | 26 | 30 | |
5 | 900 | 1300 | 3500 | - | - | - | - | - | - | - | - | - | - | - |
7,5 | 450 | 650 | 1700 | - | - | - | - | - | - | - | - | - | - | - |
10 | 200 | 350 | 900 | 2200 | 3000 | - | - | - | - | - | - | - | - | - |
15 | 100 | 150 | 400 | 1000 | 1400 | 2800 | 1700 | - | - | - | - | - | - | - |
20 | - | 100 | 200 | 600 | 800 | 1700 | 1000 | 2100 | - | - | - | - | - | - |
25 | - | - | 140 | 350 | 500 | 1000 | 650 | 1400 | 1700 | 2100 | - | - | - | - |
30 | - | - | 100 | 250 | 350 | 700 | 450 | 1000 | 1200 | 1900 | 2100 | - | - | - |
35 | - | - | - | 200 | 250 | 500 | 350 | 700 | 850 | 1200 | 1500 | - | - | - |
40 | - | - | - | 130 | 200 | 400 | 250 | 550 | 650 | 900 | 1100 | 1800 | - | - |
45 | - | - | - | - | - | 300 | 200 | 450 | 550 | 700 | 900 | 1500 | - | - |
50 | - | - | - | - | - | 250 | 150 | 350 | 420 | 570 | 1200 | 1700 | 2600 | - |
55 | - | - | - | - | - | - | - | 270 | 350 | 450 | 600 | 950 | 1400 | 2200 |
60 | - | - | - | - | - | - | - | 240 | 280 | 400 | 500 | 800 | 1200 | 1800 |
65 | - | - | - | - | - | - | - | 200 | 250 | 340 | 450 | 700 | 1000 | 1500 |
70 | - | - | - | - | - | - | - | - | 220 | 300 | 370 | 600 | 850 | 1350 |
80 | - | - | - | - | - | - | - | - | - | 220 | 290 | 450 | 650 | 1000 |
90 | - | - | - | - | - | - | - | - | - | - | - | 320 | 460 | 700 |
100 | - | - | - | - | - | - | - | - | - | - | - | 290 | 400 | 650 |
Packaging mats are a continuous series of boards of the same length, fastened with steel tape or wire, which, during the packaging process, are wrapped around a cable or wire wound on a drum. The mats are made with gaps between the boards. The amount of gaps should not exceed 50% total length mata M-200 and 30% for other types. As a reference, the table shows the lengths of cable or wire that can be wound on drums of individual sizes.
Wooden drums are designed for winding and transporting cables and wires. Currently, they are the main type of packaging for cable products. The design of the drums in accordance with GOST 5151-79 is shown in the figure, and the size data is given in the table. The drum number corresponds to the cheek diameter in decimeters.
To protect the outer turns of cable or wire wound on a drum from mechanical damage during transportation and storage, drum lining or packaging with mats is used.
The main traditional method of sheathing is to place a continuous row of boards on the edges of the cheeks and fasten them with nails through a steel strip that fits the sheathing along the edges.
The dimensions of the sheathing boards and steel tape are shown in the table.
In permitted cases, partial cladding can be performed, in which the gaps between the boards are no more than 50% of their width.
Design parameters of wooden drums
Drum number | Dimensions, mm | Number of studs, pcs. | ||||||
Diameter | Neck length, l | Thickness | ||||||
cheeks, Dsch | necks, dsh | axial hole | studs | cheeks, s | details | |||
Dimensions of sheathing boards and steel tape, mm
Mat sizes, mm
Mat number | Drum number | Board thickness (not less) | Width of boards (no more) | Nominal mat width | Wire diameter (not less) | Width of steel strip |
14a; 86; 10; 12 |
||||||
Yua; 12a; 14;14v |
||||||
20a;22a;226;22v |
||||||
Lengths of cables or wires that can be wound on drums, m
Cable diameter, mm | Drum number | |||||||||||||
5 | 6 | 8 | 10 | 12 | 14 | 16 | 17 | 18 | 20 | 22 | 25 | 26 | 30 | |
Packaging mats are a continuous series of boards of the same length, fastened with steel tape or wire, which, during the packaging process, are wrapped around a cable or wire wound on a drum. The mats are made with gaps between the boards. The amount of gaps should not exceed 50% of the total length of the M-200 mat and 30% for other types. As a reference, the table shows the lengths of cable or wire that can be wound on drums of individual sizes.
If you have not found information on the products you are interested in, contact the forum and you will certainly receive an answer to your question. Or use the form to contact the portal administration.
For reference: The “Directory” section on the website is intended for informational purposes only. The directory was compiled by sampling data from open sources, as well as information coming from cable manufacturers. The section is constantly updated with new data and improved for ease of use.
List of used literature:
Electrical cables, wires and cords.
Directory. 5th edition, revised and expanded. Authors: N.I. Belorussov, A.E. Sahakyan, A.I. Yakovleva. Edited by N.I. Belorussov.
(M.: Energoatomizdat, 1987, 1988)
“Optical cables. Manufacturing plants. General information. Structures, equipment, technical documentation, certificates"
Authors: Larin Yuri Timofeevich, Ilyin Anatoly Aleksandrovich, Nesterko Victoria Aleksandrovna
Year of publication 2007. Publishing house "Prestige" LLC.
Directory "Cables, wires and cords".
Publishing house VNIIKP in seven volumes, 2002.
Cables, wires and materials for the cable industry: Technical reference book.
Comp. and editing: Kuzenev V.Yu., Krekhova O.V.
M.: Publishing house "Oil and Gas", 1999
Cable products. Directory
Installation and repair cable lines. Electrician's Handbook
Edited by A.D. Smirnova, B.A. Sokolova, A.N. Trifonova
2nd edition, revised and expanded, Moscow, Energoatomizdat, 1990