Projects of one-story American houses. The best American style house designs

The origins of the American style originate in old European houses - since after emigrating to the United States, the British, Germans, Italians, Poles and other inhabitants of the old world brought their architectural styles and directions that first took root and then began to develop independently. It is the old European architecture, and especially the English projects of the Victorian era, that is the foundation projects in American style that combine simplicity and functionality. As a rule, American-style houses have light shades, have large windows, which provide the project with natural light, and a spacious covered terrace.

American house layout

Classic layout American houses also has some distinctive features. The rooms are usually large and spacious; as a rule, the kitchen area is combined with the dining room and living room. It is envisaged that such a house will have a wardrobe, laundry room, children's room, office and personal bathrooms. American-style houses must have a garage for at least two cars, which can be entered both from the outside and from the inside.

Characteristic features of American houses

Classic houses, made in the American style, have some special characteristics:

1. Non-standard roofs. This characteristic is especially obvious if the house has several floors. In this case, projects have gable roofs with an acute angle of inclination of a complex broken shape at several levels.
2. Exterior view of the building. The peculiarity of such a house is light facade, as well as the presence of a spacious terrace. The use of natural materials - wood for finishing facades and shutters, natural or artificial stone for finishing foundations and pipes.
3. The presence of a significant amount large windows. Helps with home lighting and visually enhances inner space due to large quantity natural light. Thanks to the milder climate, this is a completely justified decision.
4. Very well maintained local area with clear zoning.

Projects of American-style houses and cottages are houses characterized by a spacious layout, versatility and convenience. Such projects are mainly designed for, since almost every building is complemented by terraces and asymmetrical facades. It is also worth noting the roofs, which, due to their decorative effect, give the house an unusual and original look. Very often it is possible to have a sharp shape with large angles of inclination.

Modern private frame-panel American Vacation home with pitched roof

Frame American house assumes, first of all, the presence of large areas. This style, which appeared in the colonial era, first became widespread in the states where people were engaged in farming.

Despite the fact that large areas make it easy to implement many of the most incredible design solutions, Americans still prefer to build houses in which convenience and comfort come first.

Project one-story house American style

The layout of a house in America is mainly horizontal, “in breadth”. Such buildings have several wings, in which each subsequent wing has a lower ceiling height than the previous one. In this case, each wing has its own, often strongly sloping, roof. Top floor, in most cases, is an attic, intended for bedrooms.

Project of a two-story American house with attic floor and garage

You can often find in American houses that smoothly transition into the local area. The boundary between the house and the surrounding landscape is further “blurred” due to the large number of doors and windows, which are a mandatory attribute of housing. In cottages, where there is little light, windows and doors, Americans usually feel extremely uncomfortable.

American residents pay a lot of attention to the design of backyards adjacent to kitchens and terraces. A recreation area, etc. is traditionally located here.

The layout of an American-style house is carried out according to certain rules, taking into account some features. The interior is zoned in such a way that the guest lingers in the hallway, without looking at the interior chambers of the owners of the house. For this reason, they often set up next to guest area, where you can calmly drink tea at the table, sitting on comfortable sofa or chairs.

Read also

Japanese style houses

If the layout of the house does not allow for a formal place, then guests are sent to a common room, which includes a kitchen, dining room and recreation area. In parallel, the common room acts as a room for family gatherings. Typically, family dinners take place either at the dining table or as close to the kitchen as possible. Guests, in turn, are received at a separate table intended for dinner parties.

Typical layout of a one-story house

When dividing zones, they are often used different kinds partitions (except for the walls themselves), or furnishings placed in the most suitable manner for these purposes. IN kitchen areas There are kitchen islands with built-in washing machines or stoves. American style is, first of all, simple but massive furniture of clear shapes, with a predominance of one or two light shades.

American style kitchen

Recreation area in common room includes home theater and . Ceilings are often equipped with additional light sources. IN one-story houses prefabricated lighting predominates, allowing the rafters to be left open. Americans rarely use stretch ceiling, giving more preference to natural materials. Houses in the USA are illuminated using tabletop and wall lamps, which turn on simultaneously. Ceiling lamps usually used only in the common room, and even then rarely.

American style interior

The front part of the house is not complete without use floor tiles And parquet board. Moreover, in some parts of the house these materials are combined with carpet, which allows you to significantly save money on finishing the premises. The owners allocate the largest room in the house for the bedroom, which is often equipped with its own bathroom and access to the terrace. Children have smaller rooms, the bathroom of which is adjacent to all children's rooms.

In this video you can see the layout of a typical private house, which is located in the USA in the state of Texas

American style is a popular trend in modern architecture. It is characterized by certain features that make it stand out from other styles. It is due to these features that an American-style house is increasingly being chosen by people living in the CIS.

Design Features

American homes are the epitome of convenience and comfort. Thus, when planning such a structure, it is worth abandoning a full-fledged hallway and partitions that separate the hallway and living room. American-style houses initially have fairly spacious rooms. And this applies not only to the bedroom or living room. The bathrooms, kitchen, and children's room remain quite spacious.

In the video - an American-style house:

The house, built in the American style, assumes that one family will live in it. The fact is that most projects provide for 2 bedrooms. Also, such buildings may have a garage, attic or attic. These rooms are also included in projects and are considered an important attribute of every American home.

Features of facade design

When cladding the facade of an American-style house, it is necessary to adhere to simplicity and intricacy. When arranging the roof they are used gable structures. There is a spacious terrace along the perimeter of the building. American-style houses also have quite spacious and large windows, due to which the room is filled with daylight.

American style house facade

To decorate such houses, materials of light or pastel colors can be used. Most often involved a natural stone or sandstone. Since the weather is different in all states, terraces for American houses are the main condition.

Projects of one-story houses

Project No. 1

According to this project, it is possible to build a house in the American style, which will be compact and at the same time quite functional. It has a multi-pitched roof and a terrace open type and spacious utility rooms. Exterior finishing quite simple, but it is complemented by elements of wooden finishing. The main advantage of this cottage is that it has spacious rooms with a well-thought-out configuration, despite the fact that the area of ​​the house is small.

American-style one-story house

The main advantages of this project include:

• since the house is one-story, it is much easier to rescue him;
• load-bearing walls small area allows for redevelopment;
• the house is conveniently divided into areas for sleeping and daytime;
• The open kitchen looks bright and spacious;
• due to large window And open terrace manages to increase lighting in the living room;
• the day area has windows located on three sides, so that it is bright during the day;
• the pantry is quite spacious, located in the kitchen, which is very convenient when doing household chores;
• traditional style house cladding and elegant wood trim always in fashion.

For those who want to know more about what projects exist beautiful houses V classic style, it's worth going

№2

The area of ​​this American-style building is 102 m2. The peculiarity of the cottage is that its layout can be easily revised. Thanks to the laconic architecture, a comfortable living space is hidden.

Size 102 m-2

• since there are no load-bearing walls, this allows for various redevelopments;
• the personal area includes 3 bedrooms, which are located in a separate wing of the house;
• the usable area can be increased due to the presence of an attic space, because it can be quickly converted into an attic;
• since there is no solid partition between the kitchen and living room, the first one looks much more spacious;
• there is the possibility of expanding the kitchen by removing the partition in the clan room;
• large windows saturate the living room with daylight;
• only complement the façade;
• the house can be used during construction on a narrow plot.

№3

The area of ​​this house is 110 m2. This is a one-story design that combines simplicity and functionality. And although traditional outlines were used when decorating the house, it looks quite original. This is achieved thanks to the presence of a recessed porch, covered terrace and corner window. Find out more about how you can make a porch for country house made of wood, you can go

Size 110 m2

The advantages of this project include:

1. The presence of large windows in the daytime area. They are concentrated on three sides, thereby achieving maximum penetration of light rays. You can also look at that. what they will look like
2. Since the kitchen has open view, then the guest room space increases noticeably. But if desired, a partition can be installed between these rooms.
3. The highlight of this project is the fireplace, which is located in the guest room. It serves not only as decoration, but also acts as a source of additional heat.
   
4. The corridor, which is located in the night area, can accommodate a built-in wardrobe.
5. Located in the kitchen corner window, due to which the space of the room is increased.

Two-story houses

Project No. 1

The total area of ​​this building is 284 m2, and the dimensions are 18x16 m. The project provides for an attic, due to which it is possible to increase the living area of ​​the American two-story house. There are 5 bedrooms and 5 bathrooms. When constructing the house, a pile-grillage foundation was used. It is also worth paying attention to this. how it is built

Size 284 m2

Pressed stone is used to construct the walls. The roof is presented in the form composite tiles. External cladding made of natural or artificial stone, wood.

№2

The total area of ​​the building is 170 m2. The project provides for 2 floors. On the first floor there is a bathroom, kitchen, dining room, hallway, pantry, living room. On the second floor there are 2 bathrooms, a hall and 4 bedrooms. When constructing the house, a pile-grillage foundation was used.

Size 170 m2

The construction of external walls is made of foam blocks or aerated concrete. The roofing is carried out using flexible or metal tiles. The external cladding is made of artificial stone or wood.

№3

The total area of ​​the two-story American-style cottage is 264 m2. The project includes 2 floors and an attic. On the ground floor there are rooms such as an office, a pantry, a vestibule, a kitchen, a dining room, an entrance hall, a living terrace and a bathroom. But on the second there are 5 bedrooms and 2 bathrooms.

Two-story American house with an attic measuring 264 m2

In the most big room a dressing room is provided. The house was erected on a pile-grillage foundation. The construction of external walls is made of aerated concrete or foam blocks. Insulation is also provided. The roof is made of flexible or metal tiles. For external cladding use fake diamond

№4

, facing brick.

The two-story house has an area of ​​208 m2. The project includes 5 bedrooms, which are concentrated on the second floor. There is also a dressing room, a corridor, a storage room, and a bathroom. On the ground floor there is an office, living room, kitchen-dining room, bathroom, hall, hallway.

Size 208 m2 on stilts

The house was erected on a pile-grillage foundation. The external walls are made of aerated concrete or ceramic blocks. The project provides for insulation. The roof is made of metal roofing. Although an American-style house cannot be called quite popular today, it has its fans. The peculiarity of such buildings is that they simultaneously combine practicality and simplicity. Despite their small sizes

Historically, the American style of country construction is the successor to the classical European style, since the first buildings on the North American prairies were erected by people migrating from the Old World to the New. The former familiar style they brought from Europe was transformed under the influence of the new needs and lifestyle of the settlers.

Today, if these architectural traditions have changed, it is only slightly. American-style home designs still retain the clean, crisp lines of walls and roofs and an almost complete lack of embellishment. However, the abundance of auditory and attic windows, as well as an asymmetrical roof make the facade of the house not boring and intricate in its own way.

The main idea that determined the concept of projects of American houses and cottages was that the home should be spacious, because it was intended not just for big family, but for the whole family clan. Large areas provided the opportunity to comfortably accommodate several generations of household members. That is why American-style house designs will not become outdated as long as eternal values ​​are alive.

Features of the implementation of American house projects

The American style also involves some features in construction technology and planning. The basis of any house is its foundation; in the houses in question it is unusually low. That is why designs of American houses often do not include an entrance from big amount steps. The low foundation, however, does not interfere with the construction of basement floors, which, on the contrary, are located deeper than usual.

The façade is being finished natural materials, which are increasingly being replaced by imitation. Lining and siding instead of stone, sandstone and wood - not only economical, but also practical solution, after all synthetic materials Easier to paint and clean.

Designed primarily for the needs of the owners, American house designs are no strangers to hospitality: the building most often has two entrances - a front entrance and an additional one, which opens onto the terrace.

Regarding accommodation additional amenities, for example, a garage, then it is closely adjacent to the first floor. It also provides access to the workshop and exercise area. Recreation areas - playgrounds, barbecue - located on personal plot, which is distinguished by its well-groomed and interesting design.

Special house - special layout

The unity of opposites - this is how you can define the essence of such a layout. Americans love zoning rooms, combining several functional zones into one spacious room. But at the same time, they all sacredly respect privacy, so there are always separate bedrooms, children’s rooms and guest rooms in every home.

American-style houses are usually low-rise. American projects one-story houses are found as often as buildings with two floors. But only buildings with an attic received the most widespread use.

The arrangement of the rooms, which also differs from the European one, depends on the number of floors. So, in two-story house Adults' bedrooms are located downstairs, while children's rooms and bathrooms are located above.

American colonial style, clearly expressed in architecture residential buildings, V Lately is becoming very popular among domestic developers. The reason for this is the combination of convenience, visual appeal and functionality of the building, where the living space is used with maximum efficiency. An American-style house is ideal for families leading an active lifestyle, especially for couples with children.

What is a private American home? It's usually spacious two-story cottage frame type, with roof complex shape and a lot of windows. Most often, such houses have a symmetrical shape, many rooms, and an open spacious terrace at the entrance. The second floor, as a rule, protrudes above the first, and is supported by wide, even columns.

This style has other distinctive features:

• low foundation and lack of a basement;
• built-in garage;
• availability of an emergency entrance;
• lack of facade decor;
• mansard roof;
• window frames have many sashes;
• a low porch framed on the sides by simple railings.

The color scheme is quite restrained: most often used pastel shades in combination with white. But bright contrasting colors in the decoration of facades are very rare. Concerning exterior finishing: most popular material is wood of various species and its imitation. Most often you can see facades covered with overlapping clapboard, the so-called “American”. Well, since natural wood quite expensive material, many use siding that imitates the same American timber, wood chips. Natural stone, especially sandstone, and decorative brick are also used in decoration.

Great importance is attached to the landscape surrounding the house. As a rule, the local area is very well-groomed, open, and the central part is occupied by a lawn. Flower beds with low shrubs and flowers can be located close to the house, along the perimeter of the terrace, on both sides of the porch, giving the building a very cozy look. And here climbing plants are not among the favorites, and see the walls completely covered with decorative vines possible only in isolated cases.

American style facade decoration

It doesn't take much effort to make your home look like an American one. Even if the architecture of your home is extremely simple, with the help of exterior decoration you can give it characteristic appearance, which we see so often in American films. The greatest expressiveness will be provided by a combination of materials and correct selection color range.

The best option is zoning the facade using wood paneling and plaster.

How it looks in practice: the outer walls of extensions and bay windows are smoothly plastered, the remaining walls are sheathed with overlapping boards. The gables of the house can also be highlighted by covering them with wood chip siding.

Basement siding "under shingles"

If there is a high base, it is lined with stone-like tiles or torn bricks. Finally, the trim is painted beige or grey colour, trims, corners, railings - in white to give contrast.

Now let's look at the finishing technology in more detail using the example of a brick house.

Preparatory stage

For high-quality finishing need at least quality training grounds. They traditionally begin with the dismantling of all hanging elements that may interfere with finishing work.

Use a wire brush to clean the masonry joints and thoroughly clean the crumbling areas.

If the wall is old and individual bricks have also begun to crumble, they need to be knocked out with a chisel and hammer, and the recesses should be thoroughly cleaned.

Next, select whole bricks of the appropriate size, knead a little cement mortar(3 parts sand and 1 part cement M300 or M400), repair the masonry. The same solution is used to seal cracks in the walls, through holes, small potholes and empty seams.

When the solution dries, the walls are treated with a primer with antiseptic additives. It is best to prime with a brush, this makes it easier to distribute the composition over all seams and recesses. If the surface of the bricks is dense and smooth, one layer of primer is sufficient, but for a porous, highly absorbent surface, 2-3 layers will be needed. After this treatment, the walls under the cladding will be reliably protected from moisture and fungi.

Plaster surface

First, you need to identify areas that are not planned to be sheathed with clapboard. This can be not only the walls of the extensions, but also the areas around the openings, along the terrace, ground floor. It is also possible that the facade is completely covered with wood, and the back side of the house is plastered. Here everything depends on the imagination of the homeowner and his financial capabilities, because the cost of plaster is much lower than that of lining.

To make the task easier, it is recommended to draw a sketch of the future cladding in several options and choose the most suitable one. After this, mark the boundaries of the sections on the wall so that the wooden paneling subsequently overlaps the plastered plane by 15-20 cm. The marking is done using a level. You need to start work with thermal insulation of the wall, and the best insulation under the plaster is polystyrene foam.

Step 1. They attach it to a clean primed wall, which will act as a support for thermal insulation boards. To do this, determine the lower border of the finish, mark the horizontal line according to the level, mark drilling points for fasteners in increments of 30-40 cm. Drill holes in the wall, insert dowels, fix plinth strip self-tapping screws. At the joints the strip is overlapped by 20 mm.

Step 2. Prepare glue for insulation: pour the dry adhesive mixture into a container of water, stir with a mixer until smooth, leave for 5 minutes to swell and mix again.

Step 3. Take the first insulation board and apply glue along the perimeter in a continuous strip at a distance of 2-3 cm from the edge. The glue is applied in the center of the slab in small strokes or splashes. Next, the foam is applied to the wall from the corner, the lower edge is supported on the base strip, the slab is leveled vertically and gently pressed to the surface with your hands.

Step 4. The next plate is attached close to the first, trying to prevent the glue from being squeezed into the seam. After laying the first row, proceed to the second, shifting the seams by approximately half the width of the slab.

To cut polystyrene use a sharp assembly knife or a fine-toothed hacksaw.

When the entire area is covered with slabs, they are additionally secured with disc-shaped dowels, drilling holes in the center of the slabs and in the corners.

Method of fastening foam plastic with “recessing” the head of the dowel-umbrella

Step 5. Next, all corner protrusions must be covered with perforated corners: apply the solution along the entire length of the protrusion with a spatula, apply a corner, level it, press it into the glue. Excess mass is carefully removed so as not to leave sagging.

Step 6. Apply the solution in a continuous thin layer (2 mm thick) onto the foam plastic from top to bottom, apply a reinforcing mesh, and forcefully smooth it with a spatula to evenly sink it into the glue. You need to smooth it out very carefully, avoiding the formation of folds and voids under the mesh. Adjacent mesh strips are overlapped by 5 cm. Having completed the reinforcement of the area, leave the surface to dry.

Step 7 After about 2 days, you can continue plastering work. The surface is sanded with medium-grain sandpaper, the dust is swept away with a brush and primed. After the primer has dried, mix it plaster mortar and distribute it in an even thin layer over the treated surface. You need to work very carefully so as not to leave streaks from the tool, drips or other defects. The spatula should be wiped periodically with a damp cloth.

After a day, the surface must be rubbed again until it is perfectly smooth. For a better effect, you can make a liquid plaster solution, apply it very thinly to the wall and smooth it with a polyurethane float. The movements are performed counterclockwise, with equal pressure, processing the wall in squares.

At this point the finishing process is completed; painting will be done later.

Lapped wall cladding

For such cladding, you can use either a simple edged board or “American” lining, characterized by a wedge-shaped plank.

They are fastened differently, but the sheathing is installed in the same way in both cases. When choosing edged boards you need to make sure that the material good quality and its humidity does not exceed 16%, so stock up on a moisture meter in advance.

Also, you should not buy wood if there are visible stains of mold and blue stains on it, there are cracks, and there are many knots. All boards must be smooth, have the same thickness and color.

The optimal width of the boards is from 130 to 180 mm, and the thickness is about 20 mm. For the frame you will need a dry, even beam with a section of 50x50 or 60x40 mm.

You can mount a frame from a galvanized profile, but it will cost more, but a wooden beam will do an excellent job with the task assigned to it.

Advice. Before starting work, all lumber must be treated with an antiseptic primer and air dried.

Step 1. Make markings on the wall for the frame fasteners. Since the sheathing is horizontal, the frame guides must be strictly vertical. If the sheathing will border on the plastered surface on the same plane, the outermost beam should be located close to the plaster. So, take a plumb line or level, determine the vertical, draw a line on the wall with chalk, and so on along the entire wall in increments of 50 cm.

Step 2. Next, holes are drilled on each line at a distance of 30-40 cm from each other, and dowels are inserted. Take the first beam, place it against the wall, and control the vertical level. If the surface is uneven, pieces of wooden slats are placed under the beam until it is level. After this, screw in the screws and fix the guides to the wall. The outer beams are fastened first, then a nylon thread is pulled between them at the top and bottom, and the remaining guides are aligned along these guidelines.

Step 3. The next stage is insulation. It is advisable to use the same insulation for the entire house, because each material has different heat capacity characteristics. Therefore, if we used polystyrene foam for plastering, then we also choose it for the cladding. Sheets of foam plastic are tightly inserted between the guides and, if necessary, cut to size. Next, fix the material with mushroom dowels, about 5 pieces per sheet. If there are gaps left somewhere between the insulation and the timber, they need to be blown out with foam.

Step 4. Let's start covering. To give her desired angle tilt, along the lower edge of the sheathing a wooden strip with a cross-section of 20x20 mm is stuffed, having previously beaten it horizontally. After this, take the first board and apply it to the sheathing so that its lower edge completely covers the batten. Nail the board along the top edge to the guides.

Overlapping sheathing - structural diagram

Step 5. The sheathing boards should overlap each other by 20 mm, and in order not to measure the required distance each time, you can use a template from the trim wooden slats appropriate thickness. This template is applied to the already fixed board in the upper part, mark an indent of 20 mm with a pencil, and repeat the same on the other side. Now all that remains is to attach the new board to the marks and nail it to the frame.

Step 6. Before attaching the top board determine the border of the skin, mark the horizontal line and screw a 25x75 mm rail along this line. They try on the end board, if necessary, cut it to width and mount it end-to-end with the batten. Finally, the joint line is covered with a board with a section of 150x25 mm. If the roof overhangs are lined with soffits, the edge board is attached close to the soffits, and the joint is closed with a wooden batten.

Step 7 Two wide boards with a cross-section of 150x20 mm are placed vertically in the corners, closing the gaps at the ends of the sheathing. Window and door openings are also covered on the sides with boards of the appropriate width to completely cover the end part of the sheathing.

If factory American lining is chosen for finishing, the work process will be even simpler. The design of the panels facilitates quick and convenient fastening sheathing with self-tapping screws or using clamps.

Finishing the gables

The gables can also be covered with clapboard, but it is better if they are slightly different. And one of the finishing options is siding with imitation wood chips. Chips and shingles give the building a special flavor; they combine well with other materials, but the process of their manufacture and installation is quite labor-intensive. For this reason, natural wood chips and shingles are almost never used, but their imitation is very popular and in demand.

Vinyl siding for wood chips is lightweight panels 46-48 cm wide and up to 1.23 m long. The thickness of the material varies between 1-4 mm, depending on the type. Basement panels are thicker and stronger, but mostly wall siding is used for gable sheathing.

Step 1. On mount vertical sheathing from timber 40x40 mm. The distance between the guides should be equal to half the length of the panel, that is, about 60 cm.

Step 2. The ebb is attached first: the strip is cut to length, applied to the bottom of the sheathing, aligned horizontally and screwed to the guides with self-tapping screws. The starting strip is mounted on top, and the J-profile is screwed to the sides close to the roof overhangs. The upper ends of the profile are cut at an angle to secure these planks end-to-end.

Step 3. Cut the panels from the ends at an angle (for convenience, use a template from scrap materials), apply the first panel to starting bar and bring the ends into the J-profile. Align the casing horizontally and screw it to the guides with self-tapping screws.

Advice. As is the case with conventional siding, fasteners should not be overtightened so as not to cause deformation of the panels. There should be a gap of 1 mm between the screw head and the vinyl.

Step 4. Panels in one row overlap each other by a few centimeters. They have additional end locks that hide the joints and give the sheathing a natural look. The final panel is trimmed so that its edges fit freely into the grooves of the J-profiles to compensate for thermal expansion.

If there are openings on the gables, additional jumpers are made in the frame along their perimeter, after which slope strips are attached along with other additional elements. This siding can be used to cover not only the pediment, but also bay windows, balconies, one of the floors or the entire house, the basement - the choice depends only on your preferences and capabilities.

Final finishing

Chip siding is not required additional finishing, and therefore the work with the pediments is considered complete. As for the walls, there is still painting to be done to give the house the maximum attractive appearance. Plastered walls have a non-uniform, dirty color and cannot be left that way, while wooden paneling requires increased protection, which a coat of paint will provide.

In principle, wood can be treated with colorless impregnation or varnish, leaving the natural color of the material. But this finish is more typical of country - one of the areas of traditional American style. Therefore, for the walls you need to choose some Nice colour muted shade. You can choose one color for both wood paneling and plaster walls, or paint them in different shades, here everything depends on your imagination. The main thing is that the colors match each other and harmonize with the cladding of the gables.

For plastered areas, water-soluble paints based on acrylic and silicone are best suited. They are the most durable, resistant to fading, moisture and temperature changes. It is convenient to apply them with a roller or spray gun. Before painting, the walls must be brushed to remove dust and primed. The paint itself is applied in at least 2 layers - this way the color will be deep and uniform.

Wood paneling can be painted alkyd enamel or the same acrylic paint. Oil paints It is better not to use them, since they require frequent updating, and with a large area of ​​​​painting this is very expensive. It is recommended to paint with a brush, carefully rubbing the composition along the fibers. Special attention should be given to the joints and ends of the sheathing. As a rule, 2-3 coats of paint are required to obtain an even shade, depending on the absorbency of the wood.