Today we will look at what quantities are called inversely proportional, what an inverse proportionality graph looks like, and how all this can be useful to you not only in mathematics lessons, but also outside of school.
Such different proportions
Proportionality name two quantities that are mutually dependent on each other.
The dependence can be direct and inverse. Consequently, the relationships between quantities are described by direct and inverse proportionality.
Direct proportionality– this is such a relationship between two quantities in which an increase or decrease in one of them leads to an increase or decrease in the other. Those. their attitude does not change.
For example, the more effort you put into studying for exams, the higher your grades. Or the more things you take with you on a hike, the heavier your backpack will be to carry. Those. The amount of effort spent preparing for exams is directly proportional to the grades obtained. And the number of things packed in a backpack is directly proportional to its weight.
Inverse proportionality– this is a functional dependence in which a decrease or increase by several times in an independent value (it is called an argument) causes a proportional (i.e., the same number of times) increase or decrease in a dependent value (it is called a function).
Let's illustrate with a simple example. You want to buy apples at the market. The apples on the counter and the amount of money in your wallet are in inverse proportion. Those. The more apples you buy, the less money you will have left.
Function and its graph
The inverse proportionality function can be described as y = k/x. In which x≠ 0 and k≠ 0.
This function has the following properties:
- Its domain of definition is the set of all real numbers except x = 0. D(y): (-∞; 0) U (0; +∞).
- The range is all real numbers except y= 0. E(y): (-∞; 0) U (0; +∞) .
- Does not have maximum or minimum values.
- It is odd and its graph is symmetrical about the origin.
- Non-periodic.
- Its graph does not intersect the coordinate axes.
- Has no zeros.
- If k> 0 (i.e. the argument increases), the function decreases proportionally on each of its intervals. If k< 0 (т.е. аргумент убывает), функция пропорционально возрастает на каждом из своих промежутков.
- As the argument increases ( k> 0) negative values of the function are in the interval (-∞; 0), and positive values are in the interval (0; +∞). When the argument decreases ( k< 0) отрицательные значения расположены на промежутке (0; +∞), положительные – (-∞; 0).
The graph of an inverse proportionality function is called a hyperbola. Shown as follows:
Inverse proportionality problems
To make it clearer, let's look at several tasks. They are not too complicated, and solving them will help you visualize what inverse proportionality is and how this knowledge can be useful in your everyday life.
Task No. 1. A car is moving at a speed of 60 km/h. It took him 6 hours to get to his destination. How long will it take him to cover the same distance if he moves at twice the speed?
We can start by writing down a formula that describes the relationship between time, distance and speed: t = S/V. Agree, it reminds us very much of the inverse proportionality function. And it indicates that the time a car spends on the road and the speed at which it moves are in inverse proportion.
To verify this, let's find V 2, which according to the condition is 2 times higher: V 2 = 60 * 2 = 120 km/h. Then we calculate the distance using the formula S = V * t = 60 * 6 = 360 km. Now it’s not difficult to find out the time t 2 that is required from us according to the conditions of the problem: t 2 = 360/120 = 3 hours.
As you can see, travel time and speed are indeed inversely proportional: at a speed 2 times higher than the original speed, the car will spend 2 times less time on the road.
The solution to this problem can also be written as a proportion. So let's first make the following diagram:
↓ 60 km/h – 6 h
↓120 km/h – x h
Arrows indicate an inversely proportional relationship. They also suggest that when drawing up a proportion, the right side of the record must be turned over: 60/120 = x/6. Where do we get x = 60 * 6/120 = 3 hours.
Task No. 2. The workshop employs 6 workers who can complete a given amount of work in 4 hours. If the number of workers is halved, how long will it take the remaining workers to complete the same amount of work?
Let us write down the conditions of the problem in the form of a visual diagram:
↓ 6 workers – 4 hours
↓ 3 workers – x h
Let's write this as a proportion: 6/3 = x/4. And we get x = 6 * 4/3 = 8 hours. If there are 2 times fewer workers, the remaining ones will spend 2 times more time doing all the work.
Task No. 3. There are two pipes leading into the pool. Through one pipe, water flows at a speed of 2 l/s and fills the pool in 45 minutes. Through another pipe, the pool will fill in 75 minutes. At what speed does water enter the pool through this pipe?
To begin with, let us reduce all the quantities given to us according to the conditions of the problem to the same units of measurement. To do this, we express the speed of filling the pool in liters per minute: 2 l/s = 2 * 60 = 120 l/min.
Since the condition implies that the pool fills more slowly through the second pipe, this means that the rate of water flow is lower. The proportionality is inverse. Let us express the unknown speed through x and draw up the following diagram:
↓ 120 l/min – 45 min
↓ x l/min – 75 min
And then we make up the proportion: 120/x = 75/45, from where x = 120 * 45/75 = 72 l/min.
In the problem, the filling rate of the pool is expressed in liters per second; let’s reduce the answer we received to the same form: 72/60 = 1.2 l/s.
Task No. 4. A small private printing house prints business cards. A printing house employee works at a speed of 42 business cards per hour and works a full day - 8 hours. If he worked faster and printed 48 business cards in an hour, how much earlier could he go home?
We follow the proven path and draw up a diagram according to the conditions of the problem, designating the desired value as x:
↓ 42 business cards/hour – 8 hours
↓ 48 business cards/h – x h
We have an inversely proportional relationship: the number of times more business cards an employee of a printing house prints per hour, the same number of times less time he will need to complete the same work. Knowing this, let's create a proportion:
42/48 = x/8, x = 42 * 8/48 = 7 hours.
Thus, having completed the work in 7 hours, the printing house employee could go home an hour earlier.
Conclusion
It seems to us that these inverse proportionality problems are really simple. We hope that now you also think of them that way. And the main thing is that knowledge about the inversely proportional dependence of quantities can really be useful to you more than once.
Not only in math lessons and exams. But even then, when you get ready to go on a trip, go shopping, decide to earn a little extra money during the holidays, etc.
Tell us in the comments what examples of inverse and direct proportional relationships you notice around you. Let it be such a game. You'll see how exciting it is. Don't forget to share this article on social networks so that your friends and classmates can also play.
website, when copying material in full or in part, a link to the source is required.
Proportionality is a relationship between two quantities, in which a change in one of them entails a change in the other by the same amount.
Proportionality can be direct or inverse. In this lesson we will look at each of them.
Lesson contentDirect proportionality
Let's assume that the car is moving at a speed of 50 km/h. We remember that speed is the distance traveled per unit of time (1 hour, 1 minute or 1 second). In our example, the car is moving at a speed of 50 km/h, that is, in one hour it will cover a distance of fifty kilometers.
Let us depict in the figure the distance traveled by the car in 1 hour.
Let the car drive for another hour at the same speed of fifty kilometers per hour. Then it turns out that the car will travel 100 km
As can be seen from the example, doubling the time led to an increase in the distance traveled by the same amount, that is, twice.
Quantities such as time and distance are called directly proportional. And the relationship between such quantities is called direct proportionality.
Direct proportionality is the relationship between two quantities in which an increase in one of them entails an increase in the other by the same amount.
and vice versa, if one quantity decreases by a certain number of times, then the other decreases by the same number of times.
Let's assume that the original plan was to drive a car 100 km in 2 hours, but after driving 50 km, the driver decided to rest. Then it turns out that by reducing the distance by half, the time will decrease by the same amount. In other words, reducing the distance traveled will lead to a decrease in time by the same amount.
An interesting feature of directly proportional quantities is that their ratio is always constant. That is, when the values of directly proportional quantities change, their ratio remains unchanged.
In the example considered, the distance was initially 50 km and the time was one hour. The ratio of distance to time is the number 50.
But we increased the travel time by 2 times, making it equal to two hours. As a result, the distance traveled increased by the same amount, that is, it became equal to 100 km. The ratio of one hundred kilometers to two hours is again the number 50
The number 50 is called coefficient of direct proportionality. It shows how much distance there is per hour of movement. In this case, the coefficient plays the role of movement speed, since speed is the ratio of the distance traveled to the time.
Proportions can be made from directly proportional quantities. For example, the ratios make up the proportion:
Fifty kilometers is to one hour as one hundred kilometers is to two hours.
Example 2. The cost and quantity of goods purchased are directly proportional. If 1 kg of sweets costs 30 rubles, then 2 kg of the same sweets will cost 60 rubles, 3 kg 90 rubles. As the cost of a purchased product increases, its quantity increases by the same amount.
Since the cost of a product and its quantity are directly proportional quantities, their ratio is always constant.
Let's write down what is the ratio of thirty rubles to one kilogram
Now let’s write down what the ratio of sixty rubles to two kilograms is. This ratio will again be equal to thirty:
Here the coefficient of direct proportionality is the number 30. This coefficient shows how many rubles are per kilogram of sweets. In this example, the coefficient plays the role of the price of one kilogram of goods, since price is the ratio of the cost of the goods to its quantity.
Inverse proportionality
Consider the following example. The distance between the two cities is 80 km. The motorcyclist left the first city and, at a speed of 20 km/h, reached the second city in 4 hours.
If a motorcyclist's speed was 20 km/h, this means that every hour he covered a distance of twenty kilometers. Let us depict in the figure the distance traveled by the motorcyclist and the time of his movement:
On the way back, the motorcyclist's speed was 40 km/h, and he spent 2 hours on the same journey.
It is easy to notice that when the speed changes, the time of movement changes by the same amount. Moreover, it changed in the opposite direction - that is, the speed increased, but the time, on the contrary, decreased.
Quantities such as speed and time are called inversely proportional. And the relationship between such quantities is called inverse proportionality.
Inverse proportionality is the relationship between two quantities in which an increase in one of them entails a decrease in the other by the same amount.
and vice versa, if one quantity decreases by a certain number of times, then the other increases by the same number of times.
For example, if on the way back the motorcyclist’s speed was 10 km/h, then he would cover the same 80 km in 8 hours:
As can be seen from the example, a decrease in speed led to an increase in movement time by the same amount.
The peculiarity of inversely proportional quantities is that their product is always constant. That is, when the values of inversely proportional quantities change, their product remains unchanged.
In the example considered, the distance between cities was 80 km. When the speed and time of movement of the motorcyclist changed, this distance always remained unchanged
A motorcyclist could travel this distance at a speed of 20 km/h in 4 hours, and at a speed of 40 km/h in 2 hours, and at a speed of 10 km/h in 8 hours. In all cases, the product of speed and time was equal to 80 km
Did you like the lesson?
Join our new VKontakte group and start receiving notifications about new lessons
Completed by: Chepkasov Rodion
6th grade student
MBOU "Secondary School No. 53"
Barnaul
Head: Bulykina O.G.
math teacher
MBOU "Secondary School No. 53"
Barnaul
Introduction. 1
Relationships and proportions. 3
Direct and inverse proportional relationships. 4
Application of direct and inverse proportional 6
dependencies when solving various problems.
Conclusion. 11
Literature. 12
Introduction.
The word proportion comes from the Latin word proportion, which generally means proportionality, alignment of parts (a certain ratio of parts to each other). In ancient times, the doctrine of proportions was held in high esteem by the Pythagoreans. With proportions they associated thoughts about order and beauty in nature, about consonant chords in music and harmony in the universe. They called some types of proportions musical or harmonic.
Even in ancient times, man discovered that all phenomena in nature are connected with each other, that everything is in continuous movement, change, and, when expressed in numbers, reveals amazing patterns.
The Pythagoreans and their followers sought a numerical expression for everything in the world. They discovered; that mathematical proportions underlie music (the ratio of the length of the string to the pitch, the relationship between intervals, the ratio of sounds in chords that give a harmonic sound). The Pythagoreans tried to mathematically substantiate the idea of the unity of the world and argued that the basis of the universe was symmetrical geometric shapes. The Pythagoreans sought a mathematical basis for beauty.
Following the Pythagoreans, the medieval scientist Augustine called beauty “numerical equality.” The scholastic philosopher Bonaventure wrote: “There is no beauty and pleasure without proportionality, and proportionality exists primarily in numbers. It is necessary that everything be countable.” Leonardo da Vinci wrote about the use of proportion in art in his treatise on painting: “The painter embodies in the form of proportion the same patterns hidden in nature that the scientist knows in the form of the numerical law.”
Proportions were used to solve various problems in both antiquity and the Middle Ages. Certain types of problems are now easily and quickly solved using proportions. Proportions and proportionality were and are used not only in mathematics, but also in architecture and art. Proportion in architecture and art means maintaining certain relationships between the sizes of different parts of a building, figure, sculpture or other work of art. Proportionality in such cases is a condition for correct and beautiful construction and depiction
In my work, I tried to consider the use of direct and inverse proportional relationships in various areas of life, to trace the connection with academic subjects through tasks.
Relationships and proportions.
The quotient of two numbers is called attitude these numbers.
Attitude shows, how many times the first number is greater than the second or what part the first number is of the second.
Task.
2.4 tons of pears and 3.6 tons of apples were brought to the store. What proportion of the fruits brought are pears?
Solution . Let's find how much fruit they brought: 2.4+3.6=6(t). To find what part of the brought fruits are pears, we make the ratio 2.4:6=. The answer can also be written as a decimal fraction or as a percentage: = 0.4 = 40%.
Mutually inverse called numbers, whose products are equal to 1. Therefore the relationship is called the inverse of the relationship.
Consider two equal ratios: 4.5:3 and 6:4. Let's put an equal sign between them and get the proportion: 4.5:3=6:4.
Proportion is the equality of two relations: a : b =c :d or = , where a and d are extreme terms of proportion, c and b – average members(all terms of the proportion are different from zero).
Basic property of proportion:
in the correct proportion, the product of the extreme terms is equal to the product of the middle terms.
Applying the commutative property of multiplication, we find that in the correct proportion it is possible to swap extreme terms or middle terms. The resulting proportions will also be correct.
Using the basic property of proportion, you can find its unknown term if all other terms are known.
To find the unknown extreme term of the proportion, you need to multiply the average terms and divide by the known extreme term. x : b = c : d , x =
To find the unknown middle term of a proportion, you need to multiply the extreme terms and divide by the known middle term. a : b =x : d , x = .
Direct and inverse proportional relationships.
The values of two different quantities can be mutually dependent on each other. So, the area of a square depends on the length of its side, and vice versa - the length of the side of a square depends on its area.
Two quantities are said to be proportional if, with increasing
(decrease) one of them several times, the other increases (decreases) the same number of times.
If two quantities are directly proportional, then the ratios of the corresponding values of these quantities are equal.
Example direct proportional dependence .
At a gas station 2 liters of gasoline weigh 1.6 kg. How much will they weigh 5 liters of gasoline?
Solution:
The weight of kerosene is proportional to its volume.
2l - 1.6 kg
5l - x kg
2:5=1.6:x,
x=5*1.6 x=4
Answer: 4 kg.
Here the weight to volume ratio remains unchanged.
Two quantities are called inversely proportional if, when one of them increases (decreases) several times, the other decreases (increases) by the same amount.
If quantities are inversely proportional, then the ratio of the values of one quantity is equal to the inverse ratio of the corresponding values of another quantity.
P exampleinversely proportional relationship.
Two rectangles have the same area. The length of the first rectangle is 3.6 m and the width is 2.4 m. The length of the second rectangle is 4.8 m. Find the width of the second rectangle.
Solution:
1 rectangle 3.6 m 2.4 m
2 rectangle 4.8 m x m
3.6 m x m
4.8 m 2.4 m
x = 3.6*2.4 = 1.8 m
Answer: 1.8 m.
As you can see, problems involving proportional quantities can be solved using proportions.
Not every two quantities are directly proportional or inversely proportional. For example, a child’s height increases as his age increases, but these values are not proportional, since when the age doubles, the child’s height does not double.
Practical application of direct and inverse proportional dependence.
Task No. 1
The school library has 210 mathematics textbooks, which is 15% of the entire library collection. How many books are there in the library collection?
Solution:
Total textbooks - ? - 100%
Mathematicians - 210 -15%
15% 210 academic.
X = 100* 210 = 1400 textbooks
100% x uch. 15
Answer: 1400 textbooks.
Problem No. 2
A cyclist travels 75 km in 3 hours. How long will it take a cyclist to travel 125 km at the same speed?
Solution:
3 h – 75 km
H – 125 km
Time and distance are directly proportional quantities, therefore
3: x = 75: 125,
x= ,
x=5.
Answer: in 5 hours.
Problem No. 3
8 identical pipes fill a pool in 25 minutes. How many minutes will it take to fill a pool with 10 such pipes?
Solution:
8 pipes – 25 minutes
10 pipes - ? minutes
The number of pipes is inversely proportional to time, so
8:10 = x:25,
x =
x = 20
Answer: in 20 minutes.
Problem No. 4
A team of 8 workers completes the task in 15 days. How many workers can complete the task in 10 days while working at the same productivity?
Solution:
8 working days – 15 days
Workers - 10 days
The number of workers is inversely proportional to the number of days, so
x: 8 = 15: 10,
x= ,
x=12.
Answer: 12 workers.
Problem No. 5
From 5.6 kg of tomatoes, 2 liters of sauce are obtained. How many liters of sauce can be obtained from 54 kg of tomatoes?
Solution:
5.6 kg – 2 l
54 kg - ? l
The number of kilograms of tomatoes is directly proportional to the amount of sauce obtained, therefore
5.6:54 = 2:x,
x = ,
x = 19.
Answer: 19 l.
Problem No. 6
To heat the school building, coal was stored for 180 days at the consumption rate
0.6 tons of coal per day. How many days will this supply last if 0.5 tons are consumed daily?
Solution:
Number of days
Consumption rate
The number of days is inversely proportional to the rate of coal consumption, therefore
180: x = 0.5: 0.6,
x = 180*0.6:0.5,
x = 216.
Answer: 216 days.
Problem No. 7
In iron ore, for every 7 parts iron there are 3 parts impurities. How many tons of impurities are in the ore that contains 73.5 tons of iron?
Solution:
Number of parts
Weight
Iron
73,5
Impurities
The number of parts is directly proportional to the mass, therefore
7: 73.5 = 3: x.
x = 73.5 * 3:7,
x = 31.5.
Answer: 31.5 t
Problem No. 8
The car traveled 500 km, using 35 liters of gasoline. How many liters of gasoline will be needed to travel 420 km?
Solution:
Distance, km
Gasoline, l
The distance is directly proportional to gasoline consumption, so
500:35 = 420:x,
x = 35*420:500,
x = 29.4.
Answer: 29.4 l
Problem No. 9
In 2 hours we caught 12 crucian carp. How many crucian carp will be caught in 3 hours?
Solution:
The number of crucian carp does not depend on time. These quantities are neither directly proportional nor inversely proportional.
Answer: There is no answer.
Problem No. 10
A mining enterprise needs to purchase 5 new machines for a certain amount of money at a price of 12 thousand rubles per one. How many of these machines can an enterprise buy if the price for one machine becomes 15 thousand rubles?
Solution:
Number of cars, pcs.
Price, thousand rubles
The number of cars is inversely proportional to the cost, so
5: x = 15: 12,
x=5*12:15,
x=4.
Answer: 4 cars.
Problem No. 11
In the city N on square P there is a store whose owner is so strict that for lateness he deducts 70 rubles from the salary for 1 lateness per day. Two girls Yulia and Natasha work in one department. Their wages depend on the number of working days. Yulia received 4,100 rubles in 20 days, and Natasha should have received more in 21 days, but she was late for 3 days in a row. How many rubles will Natasha receive?
Solution:
Working days
Salary, rub.
Julia
4100
Natasha
Salary is directly proportional to the number of working days, therefore
20:21 = 4100:x,
x=4305.
4305 rub. Natasha should have received it.
4305 – 3 * 70 = 4095 (rub.)
Answer: Natasha will receive 4095 rubles.
Problem No. 12
The distance between two cities on the map is 6 cm. Find the distance between these cities on the ground if the map scale is 1: 250000.
Solution:
Let us denote the distance between cities on the ground by x (in centimeters) and find the ratio of the length of the segment on the map to the distance on the ground, which will be equal to the map scale: 6: x = 1: 250000,
x = 6*250000,
x = 1500000.
1500000 cm = 15 km
Answer: 15 km.
Problem No. 13
4000 g of solution contains 80 g of salt. What is the concentration of salt in this solution?
Solution:
Weight, g
Concentration, %
Solution
4000
Salt
4000: 80 = 100: x,
x = ,
x = 2.
Answer: The salt concentration is 2%.
Problem No. 14
The bank gives a loan at 10% per annum. You received a loan of 50,000 rubles. How much should you return to the bank in a year?
Solution:
50,000 rub.
100%
x rub.
50000: x = 100: 10,
x= 50000*10:100,
x=5000.
5000 rub. is 10%.
50,000 + 5000=55,000 (rub.)
Answer: in a year the bank will get 55,000 rubles back.
Conclusion.
As we can see from the examples given, direct and inverse proportional relationships are applicable in various areas of life:
Economics,
Trade,
In production and industry,
School life,
Cooking,
Construction and architecture.
Sports,
Animal husbandry,
Topographies,
Physicists,
Chemistry, etc.
In the Russian language there are also proverbs and sayings that establish direct and inverse relationships:
As it comes back, so will it respond.
The higher the stump, the higher the shadow.
The more people, the less oxygen.
And it's ready, but stupid.
Mathematics is one of the oldest sciences; it arose on the basis of the needs and wants of mankind. Having gone through the history of its formation since Ancient Greece, it still remains relevant and necessary in the everyday life of any person. The concept of direct and inverse proportionality has been known since ancient times, since it was the laws of proportion that motivated architects during any construction or creation of any sculpture.
Knowledge about proportions is widely used in all spheres of human life and activity - one cannot do without it when painting (landscapes, still lifes, portraits, etc.), it is also widespread among architects and engineers - in general, it is difficult to imagine creating anything something without using knowledge about proportions and their relationships.
Literature.
Mathematics-6, N.Ya. Vilenkin et al.
Algebra -7, G.V. Dorofeev and others.
Mathematics-9, GIA-9, edited by F.F. Lysenko, S.Yu. Kulabukhova
Mathematics-6, didactic materials, P.V. Chulkov, A.B. Uedinov
Problems in mathematics for grades 4-5, I.V. Baranova et al., M. "Prosveshchenie" 1988
Collection of problems and examples in mathematics grades 5-6, N.A. Tereshin,
T.N. Tereshina, M. “Aquarium” 1997
Main goals:
- introduce the concept of direct and inverse proportional dependence of quantities;
- teach how to solve problems using these dependencies;
- promote the development of problem solving skills;
- consolidate the skill of solving equations using proportions;
- repeat the steps with ordinary and decimal fractions;
- develop students' logical thinking.
PROGRESS OF THE LESSON
I. Self-determination for activity(organizational moment)
- Guys! Today in the lesson we will get acquainted with problems solved using proportions.
II. Updating knowledge and recording difficulties in activities
2.1. Oral work (3 min)
– Find the meaning of the expressions and find out the word encrypted in the answers.
14 – s; 0.1 – and; 7 – l; 0.2 – a; 17 – in; 25 – to
– The resulting word is strength. Well done!
– The motto of our lesson today: Power is in knowledge! I'm searching - that means I'm learning!
– Make up a proportion from the resulting numbers. (14:7 = 0.2:0.1 etc.)
2.2. Let's consider the relationship between the quantities we know (7 min)
– the distance covered by the car at a constant speed, and the time of its movement: S = v t ( with increasing speed (time), the distance increases);
– vehicle speed and time spent on the journey: v=S:t(as the time to travel the path increases, the speed decreases);
–
the cost of goods purchased at one price and its quantity:
C = a · n (with an increase (decrease) in price, the purchase cost increases (decreases));
– price of the product and its quantity: a = C: n (with an increase in quantity, the price decreases)
– area of the rectangle and its length (width): S = a · b (with increasing length (width), the area increases;
– rectangle length and width: a = S: b (as the length increases, the width decreases;
– the number of workers performing some work with the same labor productivity, and the time it takes to complete this work: t = A: n (with an increase in the number of workers, the time spent on performing the work decreases), etc.
We have obtained dependences in which, with an increase in one quantity several times, another immediately increases by the same amount (examples are shown with arrows) and dependences in which, with an increase in one quantity several times, the second quantity decreases by the same number of times.
Such dependencies are called direct and inverse proportionality.
Directly proportional dependence– a relationship in which as one value increases (decreases) several times, the second value increases (decreases) by the same amount.
Inversely proportional relationship– a relationship in which as one value increases (decreases) several times, the second value decreases (increases) by the same amount.
III. Setting a learning task
– What problem is facing us? (Learn to distinguish between direct and inverse dependencies)
- This - target our lesson. Now formulate topic lesson. (Direct and inverse proportional relationship).
- Well done! Write down the topic of the lesson in your notebooks. (The teacher writes the topic on the board.)
IV. "Discovery" of new knowledge(10 min)
Let's look at problems No. 199.
1. The printer prints 27 pages in 4.5 minutes. How long will it take it to print 300 pages?
27 pages – 4.5 min.
300 pages - x?
2. The box contains 48 packs of tea, 250 g each. How many 150g packs of this tea will you get?
48 packs – 250 g.
X? – 150 g.
3. The car drove 310 km, using 25 liters of gasoline. How far can a car travel on a full 40L tank?
310 km – 25 l
X? – 40 l
4. One of the clutch gears has 32 teeth, and the other has 40. How many revolutions will the second gear make while the first one makes 215 revolutions?
32 teeth – 315 rev.
40 teeth – x?
To compile a proportion, one direction of the arrows is necessary; for this, in inverse proportionality, one ratio is replaced by the inverse.
At the board, students find the meaning of quantities; on the spot, students solve one problem of their choice.
– Formulate a rule for solving problems with direct and inverse proportional dependence.
A table appears on the board:
V. Primary consolidation in external speech(10 min)
Tasks on the sheets:
- From 21 kg of cottonseed, 5.1 kg of oil was obtained. How much oil will be obtained from 7 kg of cottonseed?
- To build the stadium, 5 bulldozers cleared the site in 210 minutes. How long would it take 7 bulldozers to clear this site?
VI. Independent work with self-test according to the standard(5 min)
Two students complete task No. 225 independently on hidden boards, and the rest - in notebooks. They then check the algorithm's work and compare it with the solution on the board. Errors are corrected and their causes are determined. If the task is completed correctly, then the students put a “+” sign next to them.
Students who make mistakes in independent work can use consultants.
VII. Inclusion in the knowledge system and repetition№ 271, № 270.
Six people work at the board. After 3-4 minutes, students working at the board present their solutions, and the rest check the assignments and participate in their discussion.
VIII. Reflection on activity (lesson summary)
– What new did you learn in the lesson?
- What did they repeat?
– What is the algorithm for solving proportion problems?
– Have we achieved our goal?
– How do you evaluate your work?
Example
1.6 / 2 = 0.8; 4 / 5 = 0.8; 5.6 / 7 = 0.8, etc.Proportionality factor
A constant relationship of proportional quantities is called proportionality factor. The proportionality coefficient shows how many units of one quantity are per unit of another.
Direct proportionality
Direct proportionality- functional dependence, in which a certain quantity depends on another quantity in such a way that their ratio remains constant. In other words, these variables change proportionally, in equal shares, that is, if the argument changes twice in any direction, then the function also changes twice in the same direction.
Mathematically, direct proportionality is written as a formula:
f(x) = ax,a = const
Inverse proportionality
Inverse proportionality- this is a functional dependence, in which an increase in the independent value (argument) causes a proportional decrease in the dependent value (function).
Mathematically, inverse proportionality is written as a formula:
Function properties:
Sources
Wikimedia Foundation. 2010.