Having your own plot of land and not building a bathhouse is bad manners. Even in small garden plots, where due to greenhouses and beds there was no place to place a full-fledged house, our man always found a place for a Russian bath. What can we say about full-size land plots of the individual housing construction category.
3x4 bath layout showing all sizes
Where space does not allow building a large bathhouse, a log house with dimensions of 3 * 4 is erected, and if there are no restrictions on area, then you can swing at. Moreover, any bathhouse layout will include the most basic things - a steam room, a wash room and a dressing room in various variations. The remaining rooms are optional.
It is better to split even the smallest bathhouse into rooms with internal partitions than to leave one large room.
An example of the layout of a small bathhouse measuring 6x2.3
A well-thought-out internal layout of the bathhouse is the key to successful operation. Only by dividing an already small room with walls, you can achieve high-quality heating of a steam room from which no steam will escape, a well-heated washroom with access to hot water, and a dressing room protected from steam and moisture.
As a rule, a rest room and other rooms are not built in a very small bathhouse, preferring to move them outside the building.
This allows you not only to save and optimize the internal space, but also to organize the recreation area more comfortably and thoughtfully, using alternative options.
Waiting room in a Russian bath
It is absolutely necessary, as in any capital building. This is a small, most often unheated, although there are exceptions, room. Its main task is to prevent the direct entry of cold air into the interior of the bathhouse - the washing room and steam room.
Design and layout of a bathhouse with a waiting room size 3x5
Drawings of the most modest-sized baths represent a dressing room in the form of a small nook with two doors - one leads to the street, the second leads inside the bathhouse, directly to the washing room. Sometimes the vestibule is equipped with several hooks and a narrow bench where you can leave clothes.
Some suggest combining a vestibule with a rest room. In this case, the front door from the street leads directly into the bathhouse.
Layout of a small bath 6x4
Cold air enters the room, where there is a small table with benches or sunbeds, and a full-fledged locker room is equipped. It is assumed that the rest room is heated so well from the sauna stove that cold air from the street will not change the comfortable microclimate.
Where the size of the plot allows, the vestibule can be combined with a terrace or veranda. In this case, during the warm season, the relaxation room is equipped outside, in the fresh air, and the interior spaces are used for their intended purpose - as a steam room and a sink.
Layout of a bathhouse with a relaxation room measuring 7x5
Wash room in a Russian bath
Traditionally, the steam room separated the room from the room where the water splashed. Firstly, it is much more difficult to warm up and make a large room vapor-tight than a space of a couple of square meters. Secondly, with high humidity it is very difficult to tolerate high air temperatures. Although baths with a sink and a steam room are 2 in 1 and are not at all uncommon.
Even small buildings with dimensions of 3*4 allow you to divide the internal space into a steam room and a washing room. Depending on the needs of the owners, the size of each room will depend.
If a Russian bathhouse is built for frequent meetings with friends exclusively in the company of men, then half a square meter will be enough for a washroom. And the rest of the room can be occupied by a steam room or a steam room with a relaxation room.
Bathroom layout option 4x5 with toilet and shower
If the bathhouse is being built for a family with children, or is not only a place of relaxation, but is also used for laundry and other household and household needs, then the washing room should be larger.
Read also
Bathhouse projects with an attic
It is quite possible that it will be the predominant room in the bathhouse, and the steam room will be a purely symbolic room, designed for 1-2 people. Such a bathhouse layout can do without a rest room at all, since you can drink tea and chat after the steam room directly in the house.
Russian steam room
The heart and very essence of the Russian bath is the steam room. Such a room is arranged at the maximum distance from the front door. It has no window openings and is small in size. If the dimensions of the building can be arbitrary, then the drawings of the steam room comply with the standards, which are calculated based on:
At the same time, the ceiling heights have a very small spread: from 2.1 meters to 2.4. But the length and width of a room, even for two people, can vary significantly: from 840*1150 mm to 1900*2350 mm. And these are only very modest, small-sized projects. The larger the room of the bath itself, the more space and possibilities appear when designing a steam room.
If the steam room will be used by 1-2 people, then you can make this room very compact, providing only seating for steamers.
Design and layout of a 5×5 bathhouse with an entrance hall, washing room and bathroom
If space allows, the bathhouse layout may include shelves for horizontal placement. By arranging shelves in a cascade, the steam room can be made more spacious than with the classic arrangement.
Additional rooms in the bathhouse
The bathhouse today has ceased to be just a room for taking water procedures. Today it is a place of relaxation, meeting with friends, or a country house-bath. Depending on the purpose and size of the building, the number of additional rooms can be completely different.
Bathhouse with relaxation room
If the rest room during the construction of a bathhouse is provided as a separate room, then it performs an independent function without duplicating the duties of a dressing room, locker room or wash room.
An example of a 5x5 bathhouse layout with a relaxation room
This is a very spacious room that can occupy up to 1/2 of the area of the entire bathhouse. Here, as a rule, there is a large table, comfortable benches or sun loungers; with good ventilation, you can even put special upholstered furniture that is not afraid of moisture and temperature changes. This is important, since in winter the bathhouse will not be heated constantly, and the temperature inside will drop from +25-30 to minus.
Some bathhouse designs involve placing a small kitchen area and a pool table in the recreation room. And installing a special sauna stove with a fireplace module allows you to make this room more comfortable and homely.
Bathhouse with swimming pool
The classic Russian bathhouse does not provide such luxury, but today a swimming pool in a bathhouse is not such a rarity. Some projects boast a full-fledged swimming pool, gym and... But placing a small swimming pool under the same roof with a steam room is quite a common occurrence.
Read also
Construction of a Turkish bath
A one-story bathhouse with dimensions of 8 * 10 easily accommodates a spacious relaxation room, a separate steam room, a wash room and a room with a swimming pool. In this case, the entrance to the water block is through the rest room. The washroom is a walk-through room with three doors leading into it. You can only get from the steam room to the pool through the shower.
A full-fledged swimming pool can be replaced with a plunge pool. In this case, there is no need to allocate a closed room for these needs. It is enough to make the washing room a little more spacious and install a font. This option is acceptable even for small baths.
Design and layout of a 7×12 bathhouse with a swimming pool
Bedroom in a one-story bathhouse
This layout option is very convenient if you often have guests. Then the bathhouse can be used not only as a place to relax, but also as a separate home to accommodate friends. The bedroom in the bathhouse is an independent room and does not serve as a common rest room. It may not have a separate entrance, but it must be isolated from the main bath block: wash room and steam room.
Most often, such projects offer symmetrical or asymmetrical placement of the guest room.
In the first case, the internal layout of the 3x5 bath is divided into two equal parts, the entrance door is located clearly in the center. And on one side of the entrance there is a guest room, on the other - the entire complex of bathhouses. The guest room has a common wall with either a relaxation room or a steam room and washroom.
Design and layout of a bathhouse with a bedroom
In the second case, the room is also divided into two blocks - a common bathhouse and a guest one, but the space is not divided equally. A large area is allocated for general needs, and a smaller part (usually 1/3) for a guest room.
Two-story bathhouse
A two-story bathhouse is built only if it is to be used as a living space by the owners themselves or as a guest house. Less often, a two-story bathhouse is built exclusively for relaxation.
In order to save money, a full second floor is often replaced with an attic. This type of building fully meets all the requirements placed on the second floor.
Most provide for the placement of bedrooms or guest rooms there. In small buildings this can be one common room; in larger buildings, two bedrooms can fit on the second floor. Depending on the chosen option, the floor is equipped with a small hall, which is reached by a staircase, or it may be absent if there is only one bedroom upstairs.
Layout of all floors of a two-story bathhouse 7x8
If a bathhouse with an attic is built exclusively for relaxation, then entertainment for a narrow circle of people is transferred to the second floor: a chill-out, a relaxation room, a billiard table and a cinema can be located here.
The space on the ground floor is divided into a spacious steam room, a wash room, possibly a swimming pool and a relaxation room. The rest room on the ground floor is a place with a table, benches or sun loungers, as well as a small kitchen area with a kettle, microwave and refrigerator. All this makes it comfortable to relax after a steam room and a get-together with friends.
Bathhouse with extensions
Another interesting option for planning a bathhouse is the construction of a main bathhouse block, which accommodates a steam room, a wash room and possibly a relaxation room. And all other rooms - guest rooms, bedrooms, recreation areas, a swimming pool and a plunge pool - are built nearby, as needed.
A bathhouse is so Russian and soulful that we are no longer amazed when we see it on someone’s property. Why be surprised? We need to build!
The layout of a 6x6 bathhouse begins... No, not with the purchase of timber or brick, but with the preparation of brooms. Looking at them, the work progresses, and time flies faster, and the thought of a steam room warms the soul. Well? Already want to take a steam bath?
If you managed to allocate a place on the site for a future steam room, you can arrange a classic bathhouse, a sauna, and a hammam there. Although they have one purpose - to relax the human body, warm it up, and remove all ailments and ailments. What kind of bathhouse will you have? Without an attic or with it? Perhaps with a terrace, veranda, swimming pool inside. With such space you can afford almost everything.
Why should we build a bathhouse? It would be from something
Yes, I want the steam room itself and the relaxation room to smell like natural wood. Then wooden lining and wooden panels will help you.
If you need a bathhouse urgently, you can buy a ready-made frame structure. The outside is faced with stone or brick, and the inside is trimmed with wood. But in this case, you shouldn’t even think about building a second floor - the walls won’t hold up.
Did you see? Pass by
What materials for building a bathhouse should not even be considered?
- Synthetic materials for walls are not suitable.
- Plastic panels should not be used.
- Raw wood. Even if you cut the logs yourself, they need to dry naturally for a year or two.
- Wood walls cannot be varnished or painted. Drying oil also cannot be used, no matter how much the salesperson in the store assures you. This is a petroleum product. This means that the only natural thing there is a jar – that is, nothing. And its contents will harm your health.
- Any materials that contain synthetic ingredients.
Do not hesitate to ask for quality certificates for the products you purchase.
Zoning the bathhouse
When developing different types of layouts for a 6x6 bathhouse: with an attic and a toilet, with a swimming pool, a dressing room, a veranda or without it, it is worth remembering that the dimensions of 6 meters are the external parameters of the building. Depending on the type of building material, the internal area will decrease to a lesser or greater extent.
An example of a 6x6 bathhouse layout on one floor
The design of a 6x6 bathhouse gives you more options for imagination than a 6x4 size. But their layout is similar:
- dressing room;
- washing or shower compartment;
- steam room;
- rest room;
- terrace;
- bathroom;
- room with swimming pool.
You can find a place for a combustion zone where a supply of firewood will be stored or a mini-boiler room or water heating tank will be located.
Bathhouse 6x6 with a large relaxation room
The steam room is the heart of the sauna
If the frame of the bathhouse is strong, you can immediately think about the layout of a two-story 6x6 bathhouse. On the second floor there will be a recreation room and a billiard room, and on the first floor - all other rooms. Now you can receive and entertain a much larger number of guests and friends.
It's all in the details
Sauna stove and water tank
The bathhouse needs to be heated and the water heated.
In a 6x6 sauna, it is practical to use a stone stove. Metal heats up quickly and cools just as quickly. Therefore, its heat is not enough for all rooms.
A swimming pool in a bathhouse is a dream
If there is a second floor, the pipe coming out of the stove must be lined with bricks like a Dutch oven (for 3 wells).
In addition to the stove, you will need a boiler or water heating tank. Often, wanting to save on footage, they combine a hot water tank and a stove - very reasonable.
Types of tanks:
- combined. The stove heats up the water. True, because of this it gives a little less heat to the rooms;
- pipe The stove is separate, the tank is separate. And the tank can be located in the room above the stove to be closer to the chimney;
- remote They are equipped in the shower compartment and require the installation of a heat exchanger.
When choosing a tank, roughly calculate how many people will be steaming in the sauna at the same time. 10 liters are needed for 1 person. And for 6 – at least 60-75 liters.
Rest room
If it is on the second floor, there will be room in it for a billiard table, a bar counter, and a couple of cozy sofas.
Is there a balcony or terrace included in the layout? Bring a couple of chairs and a table there too. Please note that the internal area will be reduced in this case.
Accommodation on site
6x6 is a decent size for the structure. But the bathhouse should not block the entrance to the house or immediately attract attention.
It is better if it stands at some distance, hidden from prying eyes by a hedge or fence. Then, next to the steam room, you can put a large barrel or equip an artificial pond for contrasting procedures. This is if there was no room for a pool inside.
The 6x6 bathhouse layout options presented below will tell you which direction to go. Or donate the dressing room, combining it with the dressing room. This will allow the steam room or pool itself to be larger. Or make room for the kitchen as well. And then you get a small residential house with an additional highlight in the form of a steam room. And so, and so good.
A spacious sauna is the dream of any steam lover. The size and dimensions of the building largely depend on the available space on a country plot or dacha.
A popular size for spacious garden areas is a 6x6 m bathhouse.
Peculiarities
The design of a 6x6 m bathhouse is quite simple and unpretentious. However, externally such an object looks solid, spacious and “our way.” The resulting structure is functional inside; it can be divided into several isolated rooms, including a walk-through recreation area.
The advantages of the dimensions of a 6x6 m bath are:
- large spacious seating area up to 17 sq. m.;
- the ability to build a spacious steam room with a separate combustion room and utility room;
- a separate vestibule or hallway, which will allow you to undress comfortably and keep warm in the bathhouse itself;
- the opportunity to equip the building with an open terrace, on which in the summer you can place comfortable chairs, hammocks, tables, and in the winter you can stand in the fresh frosty air, remaining under a canopy;
- the presence of a separate bathroom, as well as a shower or washing room.
For a bathhouse of this size, you can consider a project with an upper attic floor and a balcony, which will allow you to allocate a room for a guest room or, for example, for billiards. This bath size is optimal and comfortable for simultaneous use by several people (up to 8).
If you expect that such a bathhouse will be used frequently by a smaller number of people (for example, if we are talking about a young family), it is important to consider that the bathhouse must be constantly heated. The larger the room, the longer it will take to heat it and waste fuel resources.(wood or gas with water supply system).
Materials
When choosing a material, you should take into account its availability, as well as the characteristics of the building. The choice is wide; the technology for constructing a bathhouse depends on the choice of material.
Log house
At all times, the most popular material for the construction of baths in Russia was natural wood. A log house was made from round logs, which had all the necessary qualities for a real Russian steam room.
These include:
- high level of thermal insulation;
- environmental friendliness and safety of the material for human health;
- low level of shrinkage;
- good sound insulation;
- light weight of the structure, which allows you to save on the foundation.
The chopped sauna has a pleasant aesthetic appearance and smell when heated inside. This material allows you to implement various projects, including those with an attic floor. Wood has a good level of natural ventilation; this material “breathes”. At the same time, there is always the opportunity to purchase a ready-made log house. Among the disadvantages of a log house, several negative factors can be identified.
In addition to the increased risk of fire, wood releases moisture over time:
- Vapors take a long time to erode from wood; they tend to linger in the structure of the material, which leads to rotting and mold.
- It is necessary to carry out additional work to seal seams and gaps between elements.
To reduce the influence of negative factors, the wood is subjected to special treatment. Antiseptics against mold and impregnations against rotting are used before construction begins..
To create a certain stylistic unity on the site, the log house can be decorated with decorative building materials. For example, it can be plastered, lined with brick, or lined with stone. Rustic or country style does not need external transformation.
Frame bath
But such an object has a number of negative factors:
- additional work on insulation and high-quality finishing is required;
- shrinkage of the foundation can be up to 10 cm within 2 years;
- Due to significant shrinkage, many finishing materials for the facade lose their presentable appearance (they crack, chip off).
To insulate and insulate floors, it is necessary to use special expensive polystyrene foam and cotton wool, which do not emit toxic substances when heated strongly, and are also not afraid of high humidity. The insulated foundation should be covered quickly, otherwise under the influence of the environment it may lose its properties and deteriorate.
One person cannot take part in the construction of a bathhouse, since many of the elements are quite voluminous and heavy. Frame baths cannot be called a budget option, even due to the absence of significant expenses on the foundation. However for those who are in a hurry to complete construction and start enjoying the finished building, this option is ideal.
Made of brick
Brick baths are not the most popular. When assessing the pros and cons of such buildings, it is rare that the choice is in favor of such building materials. Before building such a bathhouse, you should evaluate the positive and negative aspects.
The advantages of brick and buildings made from it include:
- strength and resistance to mechanical damage;
- long service life;
- heat resistance, no negative impact on sudden temperature changes;
- presentable appearance, as well as the possibility of erecting unusual architectural elements;
- simple technology for constructing buildings of different heights.
This building material does not support fire. Mold and mildew do not grow on brick, so it does not need to be treated with special antiseptics. Such buildings do not rot, these baths retain heat for a long time.
Disadvantages of brick baths:
- high cost of material;
- construction requires a solid foundation;
- the need for interior decoration;
- It takes a long time to build a brick bathhouse.
The brick takes a long time to heat up; such a bathhouse will have to be heated in advance or it is necessary to think through an internal thermal insulation system, which is another costly job. If you have access to cheap material, and also want to build a complex architectural structure, building a bathhouse made of brick is justified. In any other case it does not seem appropriate.
Aerated concrete blocks
Reviews about block baths vary. Some craftsmen recommend this alternative in construction, but many are disappointed in the final result. To decide on such a building, it is worth assessing its advantages and disadvantages.
Let's consider the advantages:
- Due to the porous structure, which is achieved by gas bubbles in concrete, the blocks have excellent thermal insulation.
- This material is accessible, cheap, and its purchase will not break the budget.
- Aerated concrete blocks are larger in size than bricks, so construction does not take much time.
- This material is strong and dense, however, it can be easily sawed.
- Aerated concrete does not emit poisonous or toxic elements when heated; it is considered an environmentally friendly building material.
- The aerated concrete walls of the bathhouse will not rot, and mold will not appear on the surface and base.
- These blocks are lightweight, making them easy to work with alone.
- Due to the lightness of the material, a reinforced foundation is not required.
It also has disadvantages:
- Due to the porous structure of the material, the blocks absorb a large amount of moisture and then take a long time to dry.
- To dry a bathhouse made of aerated concrete, additional windows are required; even in a steam room, this inevitably leads to heat loss.
- This material is not considered breathable, so the inside of such a bath may be less comfortable than in the chopped variety.
- This requires interior and exterior finishing.
Waterproofing is required inside, but the sealant composition in most cases contains chemical elements that can become volatile and toxic when exposed to strong heat.
Considering such subtleties, It is better to build a spacious bathhouse 6x6 m from a material more suitable for this purpose. Aerated concrete blocks are a relatively young material; it is difficult to fully assess the performance of such baths and their durability.
Projects
The construction of any bathhouse should begin with a plan. There are many options for how to organize a diagram of partitions in a 6x6 m bathhouse. To draw a drawing diagram, you should decide on the architectural style and the desired content.
There is a list of premises that must be included in the layout, these are:
- rest room;
- steam room;
- washing room
If you manage the space correctly, you can include other rooms that will expand the functionality.
One-story
This is the simplest project; in addition to a standard set of premises, it can include a terrace or terrace and a bathroom. For the convenience of changing clothes, the building can be equipped with an entrance hall or a closed veranda. You can expand the space inside by abandoning the terrace in favor of a small porch.
A hip hip roof is perfect for a one-story building.. The process of installing such a roof is not very simple, but it will perfectly withstand a large mass of snow, is resistant to strong and hurricane winds, and looks good. The building will not be high, thus it will not clutter up the site.
With attic or second floor
You can get additional space if you manage the space under the roof wisely. On the attic floor you can place one or two guest rooms, open space for a billiard table, a large plasma TV and comfortable armchairs and sofas. The presence of sleeping places expands the functionality of the building, allows you to accommodate guests, and if the main residential building is still under construction, the bathhouse can become a temporary home for the owners. Two-story bath houses are not uncommon today.
Taking these parameters into account, you can plan a convenient building for these purposes, which will include the following premises:
- on the 1st floor: entrance hall, toilet with shower, relaxation room (combined with kitchen, including stove and sink), steam room.
- on the 2nd floor: large bedroom, hall, dressing room.
To save space, a spiral or corner staircase can lead to the second floor. For the attic floor, a gable sloping roof is better suited. For a two-story building, a hip roof is preferable.
Additional rooms or objects in the baths can be:
- pool;
- font;
- balcony;
- pantry;
- fireplace in the recreation room.
The layout of the 6x6 meter bath allows you to “play out” different ways of arranging the rooms. You can make a standard version: a steam room, a washing compartment and a dressing room, and the rooms will be large. For those experienced in planning, there are many other arrangements.
What exactly do you want or how to choose a successful project?
Initially, it is necessary to decide on the ratio of rooms and the need to build auxiliary premises. Some people will be satisfied with the standard option. But don't stop there. 36 square meters will allow you to implement a wide variety of ideas, including arranging a small swimming pool and a relaxation room with billiards. To get a clearer understanding of the layout of rooms in a bathhouse of such dimensions, you can first look at various options for ready-made premises on the Internet, and then start from them in designing the bathhouse of your dreams.
An important point in designing a 6x6 meter bath is the possibility of choosing a stove for a large bath, its location in the steam room and arranging a comfortable two-tier canopy. Various adjustments are also made to the washing department. It is possible to arrange a spacious room with separate showers, which can be replaced with a swimming pool. It's your choice here. The layout of the rest room will not create problems either. To fully relieve stress, you can make a room with a comfortable sofa and even place a TV in it. The organization of the bathroom will also create convenience. In a bathhouse of this size it will come in handy. Moreover, 1.5 or 2 m/2 will not infringe on any of the main rooms. In general, a complete flight of thought. Now let's talk specifically - what can be done?
Room layout
Very often, bathhouses with dimensions of 6 by 6 meters are built on two floors, which seems convenient, but is not financially profitable. Such buildings have an aesthetic appearance, and the ability to include the entire upper space for bathing needs. You can really go for a walk. In addition to the possibility of installing water storage tanks, there are many options for loading space.
Depending on your preferences, on the second floor you can make a large billiard room with furniture, arrange a spacious lounge with a large TV, or organize a bar counter, decorating everything in the style of modern restaurants. In addition, you can profitably use the room under the gable roof by organizing places there to store various things. In this case, neither the first nor the second floor of the bathhouse will be damaged in any way.
For people experienced in the bath business, there are still many possibilities for planning the second floor. You can make an open or glazed balcony. Equip it for a small room or simply use it in the summer, placing a table and a couple of armchairs for guests.
Now, directly to the main premises. The dressing room separation is carried out in the traditional version. It can be made single, or divided into a rest room and storage of firewood for the bathhouse. Having made a partition, the dressing room can be used for various needs and not only for baths. When choosing an option, the presence of a second floor is taken into account. If it is in the plan, then on the ground floor you can only make a locker room and a small warehouse.
The steam room should occupy half the space that will remain after fencing off the space for the dressing room. This is necessary so that it can accommodate a large number of people at once. But it is precisely for the mass reception of procedures that the bathhouse, measuring 6x6 meters, is designed.
The location of the steam room and sink is selected individually. There are a lot of standard schemes, with one door to the steam room and a place for washing. As an option, a layout with separate entrances is often used. The convenient location of the door opens into a small vestibule, from which two entrances are made to the washing compartment and the steam room. You need to rely on your financial capabilities. It is necessary to choose doors to the steam room and washing compartment, guided by the rules of standard sizes.
How to build and from what?
Quite a lot has already been said about the construction of a bathhouse from ordinary timber. As another possible option, consider the process of construction from glued material. It may be a little more expensive than regular timber, but during production, special grooves are cut into all elements, and assembly will be much faster. A unique, large construction set. All connections are adjusted to each other, and during assembly this ensures maximum tightness.
When using any material for construction, the first step is to prepare the site. The parameters are determined and markings are made for pouring the base. If there are uneven terrain, slabs are laid below the soil level, and the formwork is raised to level the base of the future bathhouse.
Windows in the bathhouse
This stage stands apart in the construction of a bathhouse made of laminated veneer lumber. According to the manufacturing technology, wood is completely safe in terms of the shrinkage process. Therefore, door and window frames can be installed immediately, without having to wait for the time allocated for drying. There are no restrictions on the choice of systems. Wooden frames and plastic structures, which can be ordered to match the color of the wood, will look equally good in a log house, thereby keeping everything in the same style. 
Communication lines
If you are unfamiliar with the specifics of such work, entrust it to professionals. Without knowing the ford, you can ruin the entire appearance of the wood by laying sockets or trying to push a sewer pipe at the correct angle of inclination. This requires sustained technology. And although today there are many options for hiding electrical wiring, this work will not tolerate even the slightest deviations and errors, which can lead to disastrous consequences.
The profitability of purchasing a ready-made bathhouse project made of laminated veneer lumber is proven by the minimum construction time and shrinkage process. Having chosen this option and purchasing products at the factory, make sure that each link is numbered. In this case, the entire complexity of the assembly will lie only in the correct distribution of marked elements.
The 6 by 6 bathhouse design is the best option, as it can even accommodate a swimming pool. All rooms are spacious and roomy. A bathhouse made of 6x6 timber with a terrace would be an ideal option for a large company. In the summer, you can relax in the fresh air, hiding under a roof in the shade or from the rain.
Let's take a closer look at the possible layout options:
- Steam room. It is necessary to think in advance how many people will be in the steam room at the same time, and from this select the square footage of the room. Option 2x2 sq.m. suitable for three people, and in 2.5x2.5 you can fit eight. Here, as a rule, a stone stove and wooden shelves are installed.
- Shower room. The square footage of the room is often three times smaller than the previous one, but there are projects with equal areas. Usually a shower is installed here; you can accommodate a font or a small pool.
- Rest room. The area of this room should be at least twice as large as the previous ones. This is where most of the time is spent. Therefore, you need to plan in advance what to fill it with: sofa, table, TV, etc.
- Terrace. The usable area for any bathhouse may vary depending on the plan.
Projects of two-story buildings increase the space for recreation. The room is smaller than the first floor, as it is located under the roof. On the second floor of the project there is a balcony and two rooms.
Features of bathhouse construction
The construction of wooden baths does not require a deep foundation. The weight of the materials allows the use of a tape base.
Timber technologies offer a choice of:
- solid timber. It is inexpensive and popular in construction;
- profiled timber. Easy to construct, does not require external finishing;
- laminated veneer lumber. An expensive and durable option.
A layout of 6 by 6 m is the most optimal for baths made of timber. The square footage of the premises allows for a large company to be accommodated.
A bathhouse made of profiled timber from the Russian Spaces company is easy and quick to assemble, looks aesthetically pleasing, and will serve you for many years.
Our manager will advise on all issues and help you choose a project that suits you or make changes to an existing one.