Finishing narrow slopes of the entrance door. What is the best way to finish the slopes of the front door? Features of the masters' work

Creating door slopes is an ideal option for completing the finishing of any opening - including external and interior doors. These works are as important a stage of repair as the process of installing the canvas itself. And the final picture, which can affect the entire interior of the room, largely depends on their quality. In order to install door slopes with your own hands, you must have certain skills, as well as decide on the implementation method and materials of construction.

Classification of structures

There are several options for how to make a door slope with your own hands, which involve using:

• drywall, suitable for finishing surfaces whose leveling will require a large amount of solution. With the help of plasterboard sheets, the surface is easily leveled and, at the request of the artist or customer, painted or plastered;
• plaster, used in cases where the surface can be leveled using a layer of mortar no more than 30 mm thick. This option is not the fastest, but it is profitable and simple;
• laminate, which is suitable for doors or arches already finished with this material. Finishing door slopes with laminated chipboard is not suitable for rooms with high humidity and, especially, for external doors;
• MDF panels, resistant to both temperature changes and high humidity, making them suitable for any door;
• tree, a material that is not cheap, but has good aesthetic and strength characteristics. To finish the slope of a doorway when performing repair work of various classes (economy, standard or exclusive), both ordinary wood and valuable wood species should be used.

Choosing the option with door slopes with your own hands, decorative stones or tiles is a rare option, but it also has a right to exist. It is used mainly for the entrance doors of mansions. Decorative stone looks especially advantageous in combination with a porch, terrace or path to the house made of the same material.

The variety of ways to finish door slopes allows you to choose the appropriate option for any conditions. One of the main selection criteria is the correspondence of the decorative characteristics of the structure to the overall interior. If several options are suitable for the design of the room, choose the one that most suits the tastes and financial capabilities of the home owner.

DIY door slopes

During the installation process, it is necessary to prepare the surface. And only then apply the chosen finishing technique. And it, first of all, depends on what kind of doors we are talking about - those installed between rooms or entrance ones.

Slope preparation

In most cases, the surface is pre-leveled. To do this, the work contractor must first prepare the necessary materials - plaster, primer, starting putty, construction mixer (or a suitable attachment for a drill), roller, mesh, masking tape and bucket. In addition, to prepare for finishing, the slope must first be completely cleaned of old finishing materials (such as polyurethane foam or plaster) and dirt. And then move on to the alignment steps, which can be found on the Internet and even watch a video of this process:

1. Prime the surface;
2. in a suitable container;
3. Apply the solution, leveling it to the desired thickness. The adhesion of the material can be improved by spraying the concrete with water. And, if the wall was severely damaged when installing the door, a special mesh should be used;
4. using corners;
5. Rub the dried layer of mortar until cracks and irregularities disappear;
6. Re-prime;
7. Bring the surface to normal condition using already
8. Having leveled the surface, proceed to the final finishing - painting (if the simplest option is chosen), wallpapering, laying tiles, installing drywall or panels.

Slopes for entrance doors

If we consider options suitable for external doors, it is worth noting the three best, which have a sufficient margin of strength and can withstand constant closing vibrations. Internal slopes are finished with laminated chipboard or MDF. The panels are installed using polyurethane foam, liquid nails or using guide strips.

The exterior decoration of the door is most often done using plaster, onto which tiles or stone can be attached. The beginning of installation does not differ from leveling the surface, but ends with fixing the finishing material with glue. If additional finishing is not expected, the plaster is painted.

Slopes for doors between rooms

Do-it-yourself work on finishing the slopes of interior doors can be done using almost any materials. The main thing is to maintain consistency between the styles of structures facing the same room. MDF slopes look good in a living room - especially if you match them to the tone of the interior. Slopes covered with wallpaper are also suitable for decoration; they visually extend the walls and increase the size of the room.

In the bathrooms they use ceramic tiles - again the same ones that were laid on the walls. Ceramics are glued to a leveled surface. If the room is finished with plastic or metal-plastic panels, you should choose the same materials for the slopes. The same applies to rooms whose enclosing structures are finished with plasterboard.

Among the options suitable for interior door slopes, panel and plasterboard structures are most often used. In addition to the fact that they look more profitable, the cost of such a design will be more favorable than for options made of wood and tiles. And the time required for repair work is shorter compared to

Paneling

The method for making door slopes from MDF panels is suitable for any door and involves installing a wooden frame, the slats for which are purchased in advance and treated with an antiseptic. In the process of choosing a material, the main thing is not to make a mistake with the dimensions. It should be taken into account that the thickness of each strip in the process increases by the size of the plate attached to it;

Panel finishing begins with the selection of the necessary tools and materials:

• panels used for finishing;
• wooden blocks;
• self-tapping screws;
• screwdriver;
• roulette and level;
• hacksaws.

The technology for finishing the slopes of interior doors with your own hands from MDF is as follows:

1. Removing peeling paint and old plaster;
2. Surface primer, which does not need to be leveled;
3. Fastening the frame from bars at a level with leveling distortions on the walls (using boards or pieces of plywood);
4. Laying mineral insulation (especially important for external doors);
5. Cutting panels to fit the slopes to be finished, fitting or fitting.

The final stage of work is to secure the material to the frame. If self-tapping screws are used for fastening, they are screwed in slightly deeper into the material and. Although when installing MDF panels, liquid nails are most often used, which are applied pointwise to the guides.

Approximately the same technique is also suitable for installing laminate as finishing slopes for interior doors. Work begins with securing the bottom board with self-tapping screws and securing the next three boards with a lock. The fifth board is also installed using fasteners or liquid nails, after which the frequency continues. For a horizontal slope, each plank is fixed. The corners between the walls and slopes are finished with decorative corners or platbands.

Plasterboard structures

The option of installing slopes for interior doors made of plasterboard sheets is suitable if the enclosing structures of the room are finished with the same material, and leveling the surface using only putty will require a significant amount of material. The choice of the two possible options is influenced, first of all, by the length and width of the slope.

So, for small installation seams and minimal damage when installing the door, the first method is used:

1. Elements are cut out of the plasterboard sheet taking into account the slope angle;
2. The surface of the slopes is cleaned and primed;
3. The dry mixture for gluing drywall is diluted with water according to the instructions;
4. The finished substance is applied in a thin continuous layer to the element that needs to be pressed against the prepared slope;
5. The panels are installed starting from the side surfaces;
6. After installation, the cut parts are fixed using masking tape.

The glue dries, after which the seams need to be puttied and cleaned with fine-grained sandpaper. And after another layer of primer is applied to the slope, it is considered completely ready. Additional finishing can be installed on top of the drywall.

Installation of entrance doors provides reliability, safety and high-quality protection from heat loss, all kinds of external sounds and noise. If a person is renovating his own apartment on his own, the next question he will have is how to seal the door slopes with his own hands.

No matter how carefully the door is installed, you are unlikely to be able to do without additional finishing of the slopes.

On the outside, doors are most often sealed by craftsmen, or people seal them themselves during the installation process. On the inside, everything is much more complicated. Bare concrete, door fastenings, bricks, and so on will be visible. In order to hide all this disgrace, you will need to make door slopes.

It is worth knowing that the process of finishing the slopes of entrance doors can be done with the help of installers, but not every company is ready to undertake this. Therefore, you will need to make the slopes yourself.

This process is not at all complicated with any method of forming slopes.

Return to contents

Instructions on how to make slopes on the front door yourself

Elements that will be needed to make entrance door slopes:

External view of the slope after installing the door. In order to hide defects, you will need to make door slopes.

1. The material that will be used as cladding (plasterboard, laminate, MDF, plastic panels, etc.).
2. Film and masking tape.
3. Deep penetration plaster.
4. Beacon profiles.
5. Gypsum solution.
6. Cement-sand mortar.
7. Drill with mixer attachment.
8. Self-tapping screws.
9. Wooden blocks or slats.

Return to contents

Existing methods for making slopes

The main purpose of a plasterboard slope is to give a normal appearance to the doorway and to reliably cover the fastening of the door frame. This will make it possible to increase the burglary resistance of the entire structure. There are several ways that people can form slopes themselves:

1. Seal with mortar and plaster.
2. Glue the finishing material with the solution.
3. Cover the frame with finishing material.

The division should be made specifically according to the method of formation of the slope. This is due to the fact that it will be possible to select a wide variety of materials for cladding. Slopes can be made of plasterboard, laminate, MDF, plastic panels, wooden slats, cellulose panels and many other materials. The choice must be made based on how you plan to secure the front door slope with your own hands.

The most acceptable option in terms of sound insulation and protection is to seal the entire slope with mortar. In addition, the result will be a slope that does not bend and has no voids. However, from a design point of view, this option is somewhat cramped. A good solution might be to decorate the slope using textured plaster and painting.

If, in addition to filling with mortar, various finishing materials are installed, it will be possible to achieve absolutely any appearance. Therefore, this option, when executed well, combines the advantages of the first method and has no disadvantages.

It is important to understand that without high-quality slopes, even the most beautiful door can lose all its attractiveness.

The last method of sloping an entrance door is based on mounting finishing material, for example, MDF, plasterboard or plastic, on a pre-constructed frame, which people can make themselves from wooden blocks or a metal profile.

This option may be ideal when constructing slopes using other methods requires a sufficiently large amount of solution to completely fill it. As a result, it will be possible to save some money, in addition, you can make the slope more aesthetically pleasing. It is worth knowing that with a frame structure it is much easier to achieve evenness and maintain all levels, and this is very important for visual perception.

Using this option for slopes can be great for installing lighting and switches in or above a doorway. This way it will be possible to illuminate the hallway at the entrance to the apartment itself. In addition, with a frame structure, it will be much easier to carry out such communications yourself as, for example, the Internet or cable television.

Return to contents

Carrying out all necessary preparatory work

It is worth noting that the preparatory stage is the same for any method of forming slopes. First of all, you will need to cover the door frame and door leaf with film and masking tape to avoid any damage. It is necessary to cut off all particularly protruding parts that may interfere with the process of installing the frame of future slopes or protrude above the plastering level.

After this, the entire surface is swept and primed. It is important to note that in this case the best option would be to use a deep penetration primer. It is important to use a surface primer only if the wall is made of any loose material (for example, foam concrete).

At this stage, it is worth considering laying a power cable to connect the switch that will be needed to light the lamps in the hallway. If you plan to use the option with frame fastening of slopes, it would be better to postpone laying the wire until the frame is installed.

Return to contents

Carrying out the process of plastering slopes

With a frame structure, it is much easier to achieve evenness and maintain all levels.

You will need to install beacon profiles on the primed and prepared surface. They will make it possible to create a smooth surface for the solution that is applied. The beacons can be secured using a solution. In this case, it will be important to use a gypsum solution, because it sets quickly, therefore, you will have to wait much less before proceeding to the next stage.

It is necessary to place small piles of mortar in two or three places along the length of each end, and then install the beacons. Using a bubble level, you need to adjust the position of the beacons in one plane.

After the solution under the beacons has hardened, it will be possible to begin filling the slopes with cement-sand mortar. Cement and sand must be mixed in a ratio of 1:4, then thoroughly mixed with a mixer attachment, which is inserted into a drill at low speeds. The solution should look like a curd mass. You need to add a little gypsum as needed.

Using a spatula and trowel, you need to apply the solution to the slopes of the doorway and level it along the beacons. The solution will dry for at least a day. After it has dried, you can begin applying the starting and finishing putty. The final dried putty will need to be finally leveled using an abrasive mesh. Next you will need to cover the slope with paint.

Return to contents

Formation of slopes using finishing material for mortar

Materials such as drywall, MDF, plastic slopes and so on are strengthened using cement-sand mortar or adhesive. After this, the surface is ready: smooth and primed.

Technology of applying adhesive composition to a sheet of drywall.

It would be best to indicate the level of future slopes and provide a good stop for the sheathing material. To do this, you will need to screw the screws into the wall so that their heads form a single plane. In this case, you need to take into account the thickness of the sheathing material, because it will rest on the heads of the screws. Next, it will be possible to fill the entire space of the slope with mortar around the perimeter.

For the sake of economy and reliability, you can use a cement-sand mortar as the first layer, with which you can form a layer slightly smaller than the height of the support screws. Next, you will need to select an adhesive composition that is suitable for the selected cladding material. The adhesive will need to be applied in an even layer over the surface of the slopes and onto the strips of material on the reverse side.

Next, you need to carefully attach the sheets of material to the slope, and then press them until they rest against the caps of the screws. The levelness of the installation can be checked using a level. If necessary, you can adjust the position if the solution has not yet set.

If there is a gap between the sheathing sheets and the wall, it will need to be sealed with mortar. Next, you can attach the platbands.

Many owners prefer to do apartment renovations with their own hands, especially at the stage of solving design problems. A modern man boldly orders a metal base for the front door, handles the decorative coating and installation himself, significantly saving the family budget. This is the only solution in cases where the interior decoration of the front door is difficult to combine with the interior of the corridor.

How to cover the front door

When decorating a house from the outside, the master takes into account a wide range of air temperatures in summer and winter, fluctuations in humidity levels depending on precipitation and other operational features. The likelihood of damage to the door leaf inside the house is almost minimal, the influence of natural factors is limited. Selection of materials, suitable for decorating the interior of the corridor, presented in the construction market in a large assortment.

It is necessary to carefully study the instructions and the procedure for performing installation work, taking into account the peculiarities of the location of the rooms. Perhaps it would be better to highlight the central entrance so that it stands out from other openings. The design with mirrored glass looks impressive. An illusion appears free space in a small corridor.

Solid wood panels

The most expensive type of wooden overlays for decorating a metal frame are oak slabs. The high price of wood is justified by its advantages:

The panels can be ordered directly from the machine, and you can paint them yourself, choosing the desired shade. After a few years, it is recommended to apply the top coat of varnish again to give a new shine to the whole house. In the modern construction market arrays of 40 species of trees are presented.

Laminate

Laminated strips are a multi-layer material that is perfect for interior decoration of an entrance door. Laminate has become a popular interior decor because it does not require special skills during installation and is easily assembled into a single piece. Care without special requirements, dirt can be easily removed with microfiber and a damp cloth.

The planks are technically easy to connect with profiles, contours, and decorative elements of any complexity. First, the master takes precise measurements, then assembles a solid laminate panel separately from the metal frame. The plates are mounted on the leaf one by one, because often the shape of the door is not perfectly rectangular. Sometimes you have to deal with intricate cutouts and voluminous elements.

Wooden lining

The high-quality material is universal and is widely used in construction. To decorate doors, it is recommended to use lining made of coniferous wood. Pine and spruce have a number of advantages:

• less expensive;
• exudes a pleasant forest aroma;
• has a natural antimicrobial effect due to phytoncides;
• beautiful wood pattern fits any design idea.

The lining is easy to assemble into a single piece due to special locking connections, and you can create any direction of the jointing line.

Leatherette

Finishing work using artificial leather remains relevant in modern interior design of houses and apartments. The main advantage of the material is its relative cheapness. It’s easy to sheathe any structure with dermantine, no expensive tools or glue required. The result of the work is a high quality top layer of the front door.

Dermantin has a long-lasting color, and you can choose any shade necessary to implement your design solution. The material does not evaporate toxic substances, repels water drops, and does not deform under temperature changes. Leatherettes are fire resistant. They are easy to care for; just wipe the surface with a clean damp cloth.

Plastic panels

Polyvinyl chloride is often used for lining a metal door. PVC has established itself in the construction market as a high-quality waterproof material that does not absorb moisture, retains its shape, appearance and lasts for a long time. The plastic panel does not rot or crack due to temperature changes in summer and winter.

Thin, even layer tightly adjacent to the main surface, without gaps, forming a continuous decorative surface. A wide selection of textures and colors meets any design needs. With proper care, plastic panels last for many years without losing their original shine.

Combinations of different materials in decorating doors are especially popular. The elements are securely attached to each other, taking into account quality and stylistic compatibility. To perform highly complex work, it is necessary to have additional tools and fastening devices.

How to finish the slopes of the front door from the inside

The luxury of oak and the shine of gold fittings will spoil unattractive slopes; their shape and appearance must be carefully thought out in order to fit organically into the overall environment without loss of functionality. Cosmetic work begins with repairing the base layer.

The plaster will have to be leveled and faced, for example, with plasterboard if the future decor is light. Drywall won't hold up on its surface of bricks. In difficult cases, alabaster is added to the plaster to make it especially durable.

The pattern and texture of the slopes can repeat the design of the walls in whole or in part. The method of gluing slopes is no different from working with walls in an apartment. To fasten laminar panels or MDF, you need to prepare a perfectly flat surface, especially if the slopes are wide. In narrow areas the panels hold up better. At the same time, the mounting foam reliably fixes the decorative material.

In light of modern fashion trends, the design of the entrance door slopes inside the apartment using artificial stone looks stylish and rich. This is a durable decor that does not require special care. A variety of textures and colors allows you to create a unique artistic composition, imitating rough stonework. Compared to natural stone, artificial material is much lighter and reduces the load on the main structure.

Decoration of slopes with decorative stone is carried out in several stages. To create the desired shape in the chosen style, various layout schemes are used, so a sketch is determined in advance. The material is attached to liquid nails or polyester resins.

Wooden slopes in a classic style remain popular today. A wide variety of colors and shades helps to bring any interior to perfection, elegantly and unobtrusively. The disadvantages of wooden slopes include the need to renew the top layer more often than other materials. But the advantages of natural wood far outweigh this drawback.

The most economical option for decorating the entrance is considered to be a layer of plaster. Without prior experience, the opening can be plastered in a few hours efficiently and reliably. Paint of any color that matches the interior of the corridor is applied on top. Plaster is also used in emergency cases to gain time before major repairs, for example. Experienced craftsmen call plaster the most reliable and simplest method of finishing work.

Doorways are rarely decorated with plastic, because this is an area of ​​increased physical influence, and plastic is not a very strong and durable material. But if the door is covered with polyvinyl chloride on top, then perhaps a PVC panel will be the only suitable material for decorating the slopes.

Before finishing work, the doorway is carefully checked for sealing in the joint area, areas with suspected air leaks are foamed. Then the excess foam is cut off, cleaned and coated with a primer.

Repairing slopes is an interesting activity that requires responsibility. Correctly selected material taking into account operational features is the key to a successful labor-intensive process.

After installing the door, there are most often large gaps between the wall and the door frame, and the appearance of the walls located next to the frame is far from ideal. To solve these problems, they came up with slopes on the doors. The name probably came from the fact that the adjacent small sections of the wall are usually made at an angle - beveled. Installing door slopes with your own hands is not the most difficult task in repair and construction, but knowledge of the technology and sequence of actions will allow you to avoid mistakes.

What are slopes made of?

The classic way to finish a doorway is to plaster it. This method is still relevant today. The slopes are reliable, they are difficult to damage, there are many finishing methods: paint, wallpaper, attach any other finishing material. The only disadvantages include high labor intensity. There is one more point: it will be difficult to achieve a perfectly smooth surface without the necessary skills, but it is possible to level it with wallpaper.

A well-plastered slope is beautiful and durable

You can quickly and without any problems. There are even special “L”-shaped profiles. Installing a slope in this case comes down to correct marking and inconspicuous but reliable fastening. There is a little more work if you install slopes made of laminated or veneered chipboard:

• The cut out parts of the slopes are attached to the wall. There are three methods: using polyurethane foam and liquid nails, using plaster mortar or using an assembled frame.
• Foam is applied into the gaps between the wall and the material according to special rules.
• The platband is installed.

The finishing made from these materials is quite hard and has a very attractive appearance. The installation technology is simple and does not require virtually any special knowledge and skills. The result is at least good.

Another simple but popular method is. Even without the skills, installing door slopes with your own hands from this material allows you to achieve good results: all the work is elementary. It just takes effort.

There is another inexpensive way to design door slopes - from plastic. If you have the skill to work with such material, you will not have any questions. The only disadvantage of this finish: low strength.

So there are many options for designing a doorway. Usually they choose the one that best suits the design of the entire room.

Slopes on the front door

Of all the above materials for finishing the entrance door slopes, we can only recommend plastering and finishing with MDF or laminated chipboard. These materials have a sufficient margin of safety to withstand repeated impacts that are simply inevitable at the entrance.

If we talk about finishing the front door from the outside, then there is essentially only one option - only sealing the slopes with plaster. Another thing is that you can attach ceramic tiles, finishing stone, and other similar materials to it. The sequence of actions in this case is as follows:

Internal slopes on the front door can also be made of MDF and laminated chipboard. They can be installed on foam and liquid nails, or you can use guide strips. The installation of MDF door slopes is described in detail in the article “. It is better not to use other materials for the front door: they are fragile and brittle.

Slopes for interior doors

To design door slopes between rooms, you can use any material. It is advisable to decorate all openings opening into one room in the same way, or very similar in style.

In living rooms, an MDF slope looks good, especially if the finish is matched to the tone of the door leaf and the same colors are present in the interior. Plaster slopes, painted or covered with wallpaper, are also popular. Classic - it is always relevant.

In the bathroom or kitchen, you can decorate the slope with ceramic tiles laid on the walls. Then the finishing technology is similar to that described above, only at the last stage the tiles are glued with the appropriate glue.

If the room is decorated with plastic panels, or the doors are made of metal and plastic, the doorway can also be decorated with this material. The installation of plastic door slopes begins, as usual, with preparation: everything that can fall off is removed and dust is cleared. The following procedure is simple:

• A starting profile is installed to the jamb along the perimeter of the door frame.
• On the adjacent wall, dowels are screwed in at a certain distance.
• A special “L”-shaped plastic slope is inserted into the starting profile.
• It is pressed against the wall, which is why the dowels fit into special grooves.

If the room was finished with plasterboard, then it would be logical to decorate the doors with the same material. There are several ways to do this. Quick and easy - stick to polyurethane foam. This method is only suitable if the slopes are more or less even. For curved slopes, you will need to assemble a frame and attach drywall to it with self-tapping screws. Read more.

Through which frost will penetrate into the house, and heat will escape outside. And the entrance group will look unaesthetic.

You can trim slopes in different ways:

• Cement and carefully putty;
• Install slopes from a sandwich panel. This is an inexpensive type of finishing. But sandwich panels are fragile and short-lived.
• Install MDF slopes. This is a more expensive and at the same time reliable method of finishing. MDF slopes are more durable. In addition, they can be matched to the color of the door. Torex produces slopes that fully match the selected door model in color and texture.

You can perform any of these options either independently or with the help of professionals. You can order the installation of MDF slopes from a certified Torex team. In this case, we guarantee high quality of work performed. Since installing MDF slopes is the most complex and time-consuming, you need to know a number of nuances. If you decide to do this yourself, use our instructions.

What will be needed to install slopes?

To install MDF slopes you will need the following tools:

• 1 – miter saw;
• 2 – roulette;
• 3 – pencil;
• 4 – angle;
• 5 – knife;
• 6 – hammer;
• 7 – masking tape;
• 8 – fastening elements;
• 9 – screwdriver;
• 10 – polyurethane foam;
• 11 – drill.

Stage 1. Control measurement of the opening after door installation

We make accurate measurements of the actual dimensions after installing the door - even if we know the exact factory dimensions. It is necessary to measure the width, height of the vertical and length of the horizontal extension.

Door trims are decorative strips that cover the walls of the doorway. They are installed if the opening is wider than the door frame. Most often, MDF panels are used for this.

It is necessary to measure at three points vertically on each side and at two points horizontally (from above).

The additional element must be adjacent to the door frame, so we measure the length along the width of the door.

Stage 2. Setting aside and marking the required dimensions of the extensions

After we have measured the required dimensions of the additions, we set them aside on the blanks of the additional elements. We make preliminary markings directly on the panel.

Using masking tape, mark future cutting lines.

On one blank for additional elements, you can put two parts - the threshold and the upper part of the additional elements.

In the same way, we set aside the dimensions of the second part, make preliminary markings on the workpiece and glue it with masking tape.

We re-mark the length of the extension directly on the masking tape.

If you do not glue the edge of the additional element with masking tape, chips may appear on it during sawing.

Once again we check the correctness of the markings.

Use a miter angle to mark a cutting line perpendicular to the edge of the panel.

Stage 3. Trimming the extensions to the required sizes

Using a miter saw, we cut the blanks for additional elements exactly along the marks.

We saw off the first and then the second horizontal parts of the extension.

We repeat the procedure for the vertical parts.

Stage 4. Assembling the accessory box

Before installation, we assemble the extensions into a solid, rigid box.

Using a drill, we drill holes for self-tapping screws - for fastening from the inside. This is a mandatory step so that when screwing in the screw does not split the MDF panel.

We make several holes at a distance of 10–15 cm from each other.

Stage 5. Installation of the extension box

We install the extension box in the opening. We set it relative to the door so that the gaps between the door and the frame are the same on all sides.

Spacer elements are needed to fix the extension box in the opening. We cut them out of a wooden block. The thickness of the spacer element is selected according to the size of the gap.

A total of 10–12 spacer elements are needed. 3-4 pieces for each vertical extension. Top and bottom – 2 pieces each.

Since in the future we will need to install platbands and close the gap, it is important that the spacer element does not protrude beyond the trim and the wall.

In the same way we hammer in all the spacer elements.

Stage 6. Installation of platbands

We attach the trim and mark the required length. The size is set according to the angle of the internal intersection of the horizontal and vertical extensions.

Similarly, we set aside the length of the second casher.

We mark the length along the inner corner of the extensions.

We cut the trim using a miter saw at an angle of 45 degrees.

Polyurethane foam is used to fix the extension box. Gives the structure rigidity and additional sound and heat insulation.

It is important not to overdo it with the volume of foam, so as not to deform the extension.

At the same time, if there is too little foam, the opening will be leaky and not rigid enough.

To remove excess foam, you need to wait for it to cool and cut it off with a knife.

Try to avoid getting polyurethane foam on the boards, walls and flooring.

First we install vertical extensions, then horizontal ones.

We attach the casing to the trim using decorative nails.

To install the trim you will need about 20 decorative nails. They are clogged at a distance of 20–30 cm from each other.

On average, each vertical trim will require 7 decorative nails, and each horizontal trim will require 3–4.

We measure the size of the horizontal platband.

Starting from the larger size, we cut at 45 degrees to reduce it.

The horizontal casing is fixed to the extension box and the vertical casing.

We press the structure against the door frame and fix it with masking tape until the mounting foam hardens - for 1–2 hours. The exact time depends on the drying time of the foam, which can be found on the packaging.

After this, you can remove the masking tape. Your front door is ready!

Installation of slopes: video

If you have never installed doors and slopes before, we recommend contacting the Torex installation team, who will complete the installation as quickly and efficiently as possible. The results of our professionals' work are guaranteed.