Original do-it-yourself lamps. Making a wall lamp with your own hands

Self-production making decorative items is a creative and interesting process. It’s not at all difficult to make wall lamps with your own hands, which can beautifully complement the interior of the room, giving it, in addition to additional lighting, comfort and homely warmth. The convenience of making such crafts also lies in the fact that it does not require large material costs for the purchase of material. So, do, for example, wall sconce You can do it yourself, even using improvised means that can be found in every home. In our article we will look at examples of independent design of wall lighting fixtures with examples of photos of finished samples.

DIY wall lamps: what you need to make

In order to make a sconce with your own hands, you need tools, a base, an electrical wiring system with a base and a bulb, and materials for the lampshade.

As for the tools, we will not list great amount everything that may be needed in one case or another, but let’s just talk about the main ones that will come in handy one way or another, namely:
stationery (pencil, rulers, eraser, possibly a compass);

• roulette;
• jigsaw or fine file;
• a drill with drills to install a wall sconce with your own hands;
• a heated glue gun (it glues much stronger various materials than any other);
• scissors;
• paint or colored spray can.

DIY wall lamp: making a frame

The basis for the lamp will be a round or square board cut from an MDF sheet. It should have the dimensions of the future sconce with your own hands (photos are presented in the article). It is also necessary to make slots in the base for installing light bulb sockets. Their number will depend on how bright the lighting should be. When making slits, be sure to take into account the thickness of the bulbs in order to correctly calculate the distance between them.

It is also necessary to cut out the sidewalls for the perimeter of the base, and make a small gap in the bottom of them in order to pass the electrical wire. The sides are fastened with self-tapping screws, the places of the caps are covered with putty. It is advisable to use sandpaper to ensure even grouting.
DIY wall lamps can include color design. The entire frame can be initially coated with a primer, which will provide long term operation and paint in the required color.

On back side On the side parts, fasteners or hooks are installed, with the help of which the lamp will be mounted to the wall.

We equip the lamp on the wall with our own hands with electrical wiring

For electricity supply equipment, you will need a power cord with a plug and a switch (you may have to buy one or use one left over from a non-working lamp). The socket can also be removed from obsolete lighting fixtures.

DIY wall lamps, or more precisely, their lampshades, are often made from flammable materials such as fabrics, paper, threads, etc. In order to avoid fire, it is worth using energy saving light bulbs daylight, which have high light output with low heating.

Light bulbs with sockets are mounted in finished frame, the wire is routed through the equipped hole. At this point, we can assume that the DIY wall lamp is half ready. Now it’s time to start making the lampshade.

DIY lampshade for sconces from scrap materials

There are many methods using materials such as wood (various twigs), fabrics, threads, etc. It is imperative to have a wire that can hold its shape well for a long time, but at the same time bend well.

DIY wooden wall lamp

After trimming large trees Various branches and snags remain, which can be successfully used by decorating wall lamps with your own hands. The photos show how a seemingly ordinary piece of driftwood turned into an elegant sconce. To do this, all I had to do was cut and sand the points, and make a hole inside for the electrical wire.

Another way to make a spectacular sconce from wood with your own hands is to decorate it with twigs grapevine, arranging them in different sequences. This lamp will become a real decoration for a room in eco style.

Beautiful DIY wall lamps (photos below) can be made from wicker. They can be made different ways weaving, but for beginners it’s worth starting with simple designs.

DIY sconce with thread lampshade

It is quite easy to make such a lamp for the wall with your own hands. To do this, you need to have a dense thread of any color (you can take white, or finished design paint in the required color), PVA glue and balloon. The technology is very simple. First of all, we inflate the ball to the size that the lampshade should have and tie it tightly. We first soak the threads in glue, and then, having attached the tip to the base, we begin to wrap them around the ball in a chaotic manner. The winding density can be anything, it all depends on how bright the lighting should be emitted by the DIY wall sconce.

Having finished the winding, you can once again coat the entire workpiece with glue with a brush and hang it to dry. We remove the ball from the completely dried workpiece - to do this, it must first be burst. The lampshade is ready. If necessary, it can be painted in any color using spray paint. It is noteworthy that with such a do-it-yourself sconce (photos are presented in the article) you can emphasize any interior style, depending on the color of the lampshade: white will suit minimalism, black will highlight high-tech, bright yellow or red will complement modernism, etc.

The idea of ​​making a lamp with your own hands came to mind when, after laying linoleum in the house, there was a cardboard pipe left (on which the linoleum was wound).

To make a lamp with your own hands, all you have to do is buy just a little 2 meters of black and red wire, 2 meters of adhesive-backed LED strip, a 12V 1A power supply, spray paint in a can. Of course, the LED strip was a bit expensive, but it was easier to work with. It was possible to use super-bright LEDs separately, but there was a lot of hassle with them in terms of wiring them together and fastening them inside the pipe.

Making a lamp with your own hands began with drawing preliminary sketches on paper. There was a desire for the lamp not only to be curved in a plane, but also in space, and have a bizarre 3D wave shape.

After the sketch on paper satisfied my wishes, I began making the lamp. Each pipe in the drawing was measured, and the pipes were cut according to these dimensions. To obtain the required angles, templates were cut out of paper and attached with tape to the pipe.

All pipes were laid out on the table and adjustments were made to the waveform.

The cuts were made on a stationary circular saw. This produces smooth, burr-free cuts with a width of 2 mm.

Now you need to connect all the pipes into one. The main task is to make smooth curves; for this it will not hurt to use a template (fibreboard sheet) on the table. Since the pipes are cardboard, they can be connected accordingly using glue PVA, but I would recommend using glues that harden stronger and faster (moment, superglue).

WITH reverse side were screwed onto the self-tapping screws wooden planks, to homemade lamp could be hung on the wall. And holes were drilled in each pipe to output wires from the LED strips.

The pipes were painted with regular spray paint. The color red was used, since the wall on which the lamp was to be located was white, I wanted to get some contrast.

The paint dries very quickly, so you can begin installing the LEDs. The main thing to remember is what to cut LED strip only possible in specially marked areas. The tape must be marked in advance so that it is enough for all 12 pipes.

We solder red wires to the “+” contact, and black wires to the “-” contact, so as not to confuse the polarity later.

We place the LED strips inside the pipes and fix them with the adhesive side to the pipe wall, and route the wires through pre-made holes. All that remains is to connect all the wires in parallel (connect red to red, and black to black) and connect to the power supply.

If regular kitchen wall lights from the store seem boring to you, original accessories You can create it yourself. You just need to look at ordinary things from a different angle and show a little ingenuity.

Wall lamps for the kitchen are no less important than built-in lighting above work area. This is especially true where sometimes it is necessary to create a cozy dining corner or visually delimit the space. Of course, today in stores you can choose stylish kitchen sconces that will look impressive in any interior. But it’s much more interesting to try to make such a lamp yourself.

Love for creativity

Hand-made items are valued not only for the opportunity to be realized or to save money on buying things - some crafts can be quite expensive. But homemade accessories give the kitchen a cozy and very home view. So even if the issue of money is not an acute issue in the family, it is still better to try to decorate the walls with an exclusive sconce.

No one says that assembling a wall lamp with your own hands needs to be done from scratch: take the base with a socket from an old chandelier and just make a new lampshade for it. For example, modern designers today en masse create beautiful things from the most unusual items. Here are some ideas for inspiration and gaining confidence in yourself:

• Tetrapacks - packaging for juices and dairy products only seem so different from the outside. They all come with the same shiny foil finish on the inside. You can cut the bags into strips and squares, make origami figures out of them and assemble them into a single lampshade for a high-tech lamp.
• Gummy bears – if brightly colored candies are strung on strings, you can create a truly unusual and impressive lamp. True, very expensive and very short-lived.
• Gears and other small parts of mechanisms - after the finest work a welder, a pile of metal can turn into an unusual lampshade or chandelier.

Ideas are literally in the air. You just need to look around and make an audit unnecessary things- you will certainly find a lot interesting ways create unusual lamp for your kitchen. And if nothing comes to mind, use the ideas we have collected.

Scaly lampshade made from disposable spoons

You will need a large 5 or 6 liter plastic bottle, a pack of disposable spoons, a glue gun and a lot of patience. And the principle of operation is simple:

1. Remove the handle and cap from the bottle, carefully cut the bottom - you can make it absolutely straight or take it lower, leaving a slight narrowing on the future lamp shade.
2. Cut the cuttings from the spoons and glue them one by one in a circle to the outer walls of the container. You need to start from the bottom up so that the next row covers the attachment points.
3. Around the neck you can make a beautiful rim of the lamp from the same spoons without the handles, pointing their ends no longer downwards, but placing them in a circle.
4. Insert the cartridge from below and pull the wire through the neck of the bottle.

Remember: in home-made lamps made of flammable and fusible materials (branches, paper, textiles, plastic), only cool-down energy-saving lamps can be installed.

Tea couple

These DIY wall lamps reminiscent of Through the Looking Glass and a tea party at the March Hare. And making them couldn't be easier. You just need to take from the kitchen identical or at least matching cups and saucers (made of plastic, earthenware), and then drill holes in the center of each item for the cord. This must be done very carefully, using a drill with a diamond tip, so that your fragile lamp “blank” does not crack.

Afterwards, you need to remove the wire from the cartridge through the holes in the cup and saucer - for reliability, it is better to glue the finished pair with Dragon or Superglue. And then all you have to do is dream up the design of the lamp. Such sconces can be screwed from below to wooden shelf in the kitchen or fix it on the frame of an old chandelier, or even just hang it on a cord.

Lamp-Wreath

Here you can use New Year's garland or LED strip - tiny light bulbs will provide light. But the lamp itself is made several times in an unusual way. To do this you need:

1. Make three rings different diameters from thick wire: tie or weld their ends, and also add jumpers to connect the circles together.
2. If necessary, the finished lamp frame can be painted to prevent rust from showing through.
3. Braid the rings with a garland, trying to place all the lanterns evenly. For reliability, secure them with tape or tie them with strong thread.
4. Glue or screw small lace napkins, knitted flowers from thin white yarn, or even paper cupcake tins on top of the lamp.

You need to decorate the kitchen sconces more richly in order to completely hide the frame and create a beautiful glowing “wreath”.

Waterproof sconce from a can

Such a lamp can be hung not only in the kitchen, but also in the bathroom, since its level of protection against splashes and dust will be quite high. It will be easy to do it in just an hour:

1. Take a wide jar for bulk products with a screw-on lid - it will be our designer lamp.
2. Cover the jar itself with lace, paint it with structural or stained glass paint, decorate it using the decoupage technique - in general, whatever talent and imagination is enough for.
3. Drill a hole in the center of the lid (enough to pass the cord from the cartridge from the inside to the outside). Make a few more holes in a circle for ventilation and additional rays.
4. Hang the resulting structure on the kitchen wall, connect it to the network, and screw in a light bulb.
5. Screw the decorated jar onto the lid.

Don't forget to connect your homemade lamp to a separate switch in the kitchen.

Luminous painting

If you want there to be a spectacular sconce on the wall and beautiful drawing, you can combine both of these items to create a truly unique lamp. The painting can also be finished - painted on paper or canvas stretched over a frame. But we will complicate the task a little and try to do everything from scratch.

For work you will need the following tools and materials:

• 2 meters profiled wooden slats 4-5 cm wide;
• Drill, jigsaw, hammer and thin nails;
• LED strip with power supply;
• Paint or varnish for wood, double-sided tape;
• Glass 50x50 cm and mat made of white cardboard;
• Dry wooden rods– 12 pcs.

Make from slats wooden frame for a lamp measuring 50x50 cm. The planks need to be cut at an angle of 45 degrees and knocked together, painted or opened with tinted varnish. In the upper part, drill 12 holes for the rods at the same distance from each other, in the lower part, glue the LED strip to the inside with tape. Now we insert the glass and mat into the frame, and through the holes of the lamp we insert the branches with the butt down. Try to make them beautiful composition, because this is the highlight of the painting for the kitchen.

You can leave the tops of the rods sticking out above the frame to create a real installation, or cut them off. It is also at your discretion the background. Colored cardboard or a printed picture of the night sky will do. Or leave everything as it is - let the kitchen wall on which you hang your original picture lamp serve as the background.

LED lamp from a burnt out lamp

This original device rather carries decorative function, which gives enough light, but for a spectacular design modern kitchen it fits quite well. True, to make it, you will have to buy a lot of different small things:

• UV LED (if you have a flashlight for checking banknotes, you can pick it out).
• 100 ohm resistor.
• Fishing fluorescent fishing line.
• USB cable - you can take it from a recessed phone or an old computer mouse.

Any old incandescent lamp will do as a base - the larger the better. You will also need transparent silicone and a small piece of 25 mm thick board to make a durable housing for the lamp.

You need to carefully cut off the base from the glass flask and remove the “filling”. Be sure to wear gloves to avoid accidentally injuring your hands. The next step is to make a wooden block: cut a round (or any other shape) flat washer according to the maximum size of the lamp, use a crown to drill a recess in the center slightly larger than the base, and a through hole for the cord outlet.

You can decorate the tree at your discretion, but if you are going to hang a lamp in the kitchen, it is better to immediately open it with varnish.

1. Solder the chain: LED – resistor – USB wire (be sure to take into account the polarity).
2. Place everything in the prepared cavity wooden case, pointing the diode into the smallest hole.
3. Fill the recess with the resistor and all soldering joints with silicone and leave until it hardens.

Lighting fixtures can not only dispel the darkness, but also give an unusual aura to your interior.

There are many different ideas with which you can make a wall lamp or any other type of lamp with your own hands.

You yourself are capable of creating a masterpiece that cannot be found in any store.

Creating an extravagant chandelier

A very original item is made from the simplest materials, most of which can be saved after a picnic. Lamps from various containers will look impressive.

To do this you will need:

• oval plastic bottle with a capacity of 5 liters;
• disposable spoons;
• cable with socket and plug;
• low power LED lamp;
• pliers;
• glue gun;
• screwdriver;
• stationery knife.

To avoid fire, use only LED bulbs!

Use a knife to carefully cut the bottom of the bottle, then remove the handles from all plastic spoons. Apply a small amount of hot glue from a gun to the cut area and glue them to the bottom of the container.

Approximately you will need about seventeen pieces. Place the next and remaining rows in a checkerboard pattern.

In order to hide the neck of the bottle, place ten to twelve spoons without handles on the glue so that they form a ring.

Pull the socket with the lamp and cable through the hole at the bottom of the bottle.

If you don’t want to make this part yourself, you can purchase it in any department of household goods - the wire, socket and plug are already connected together.

Make a hole in the lid for the cord by drilling it with a drill or a hot self-tapping screw. Screw on the lid and place the previously prepared ring of spoons on top. Exclusive LED lamp ready for use.

Some ideas for creating lampshades

It’s enough to simply create a lamp from scrap materials for your home or garden.

Idea N1

• any hollow container (this could be old saucepan or flower pot);
• wire;
• polyurethane foam and gloves;
• paint and brush;
• sharp knife;
• pliers.

Place the item taken as a basis upside down. Wind the wire around the product the way you want the lampshade to look, since all the turns copy its shape. Put on gloves and squeeze the foam onto the frame a little at a time until it completely covers the wire, leave to dry.

Then, using a knife, give the contours more evenness and paint them in any color. This option will be the best for a street lamp.

Idea N2 is a classic

• thick wire;
• pliers;
• small bottle of water.

Note!

For making the top central element screw a coil of wire onto the bottle, then remove it and trim off the excess. The ends must be secured so that they form a ring, the diameter of which should allow the cartridge to pass through at the bottom, and prevent it from coming out at the top.

Next, you need to make a large outer ring from the wire. To secure it you will need four equal pieces of wire. Connect one edge of each to the small ring, and the other to the large ring. Top part the lamp is ready.

The largest will be the bottom circle of wire; it must be attached to the second top one, evenly placing five identical pieces of wire.

To decorate the frame, thread a wire through the second top ring, giving it a wavy shape, and wind it onto the base. Decorate the bottom ring in the same way.

Note!

Take it with you on a walk through the forest interesting shape branch, it will make an excellent wooden lamp. Wash the branch and remove the bark from it with a knife, coat it with wood varnish. For good stability, screw the lamp to a heavy stand with self-tapping screws; wood can also serve as a stand.

A better option is an oak tree; find a broken branch and saw off a circle at least five centimeters thick from it. Varnish or paint it too.

Making a lampshade with children

There is an option for making a lampshade with children. For the frame you will need a canister or bottle with a capacity of five liters. You need to roll the paper strips into a tube, it is best to wrap them around a pencil or sushi stick, then glue the remaining edge with glue.

These blanks need to be glued to the frame in several layers so that there are no gaps. When the glue has dried, the lampshade can be put on table lamp or do ceiling lamp, which looks very unusual.

Experienced needlewomen can knit or crochet a lampshade, decorating it with crocheted flowers and ribbons.

To give the product the correct shape, you can use a starch solution or regular PVA glue. Look at the proposed photos of knitted lamps, how much tenderness and comfort they contain!

Note!

This article told you how to make a lamp with your own hands. Using the information received and your own imagination, you can now create an exclusive lighting fixture for any room.

DIY lamp photo

People who have developed creative abilities very often create interior elements with their own hands, and making a master class chandelier is not difficult. Only it is better to buy factory-made lamps for the bathroom, because they must be small and reliable.

Dwellings containing objects self made, acquire a refined and original look.

We make a chandelier with our own hands from plastic bottles

To make a chandelier from plastic bottles we take:

• If there old chandelier, you can take her island
• Many colorful bottles
• No more than ten steel rods

1. From plastic bottles we use scissors to cut out any figures that you want to see on your chandelier (animals, flowers, etc.)
2. We attach several twigs to the chandelier island. From the rest we make something similar to a hedgehog, connecting the rods in the middle. We remove one rod where the light bulb will be
3. Next, we supplement the resulting frame with previously cut plastic figures
4. We connect the island and the hedgehog together.

Now you know how to make a plastic chandelier with your own hands. To consolidate the material, we recommend that you watch a video that contains examples of chandeliers made from plastic bottles:

Making a chandelier with your own hands from wood

To make a wooden chandelier we will need:

• Twelve strips for door trim, 30-45 cm each.
• Liter jars from which we will make lampshades (6 pieces).
• White and wood-colored paint.
• Self-tapping screws for wood.
• Sandpaper.
• Seaming machine.

Description of the manufacturing principle.

1. Making the planks smooth using sandpaper
2. We need room for the electrical wire, so we make a notch on the back of each strip.
3. We drill three strips to which we will attach the shades.
4. We paint the planks a wood color.
5. We make a regular hexagon from the plans.
6. We attach the cartridge to the hole in the lid.
7. We roll up the jars with light bulbs inside.
8. We paint the lampshade in any light color.

DIY chandelier made of wood, photo below:

Making a chandelier with your own hands from threads

To make a chandelier from nylon threads we take:

• Let's make a lampshade from a plastic bowl
• Multi-colored threads
• Fastening paste

Description of the manufacturing principle.

1. First of all, let's make the paste. Mix half a glass of flour and two glasses of water, two glasses of water with a temperature above 60 degrees, boil and throw in about three tablespoons of sugar. Stir and wait until it cools down. Next, we’ll look at how to make a lampshade with your own hands for a chandelier.
2. Throw the yarn into the paste.
3. We wind the resulting yarn around a bowl.
4. After 24 hours, separate the resulting thread lampshade from the bowl.
5. We attach the lampshade to the bottom and that’s it, the chandelier can be hung on the ceiling

Attention! A DIY lampshade for a chandelier requires the use of a light bulb of no more than 60W, as it is made of flammable materials.

Have you decided to change your interior and want something unusual? The store offers a huge selection of different things, but why not make something yourself? The designer lives in each of us, you just need to wake him up, change the world that surrounds you, make it the way you see it!

Why not start with a chandelier? She might become business card your home, which no one else has. This will not only save your money but also give you a sea of ​​unforgettable emotions.

Make a chandelier shade with your own hands. You will be surprised that things that you were ready to throw away can be useful to you and reborn in your new invention.

First you need to decide on the style of what kind of chandelier you want.

If you are young - a romantic style chandelier is for you, you need to decorate country house– country style will be just right.

DIY chandelier (photo based on lampshade decorations)

To make a chandelier with our own hands, we take:

• Light bulb socket.
• Power cord.
• Frame for a chandelier.
• Decor for jewelry.
• Multi-colored threads.
• Hot glue.
• 60 Watt light bulb.

For the frame, what's left of your old, long-forgotten chandelier is suitable. Many famous designers began their illustrious career by giving old things a shine, bringing them to life and putting them up for sale.

Take measurements and decide on the fabric you will use. Sewing the cover the right size put on the frame. You can decorate the lampshade however you like. These can be cut out flowers, animals, figures, beads and much more that your imagination can reproduce. We attach a socket equipped with a low-power light bulb to the lampshade and everything is ready. A lampshade made by yourself will lift your spirits every time you look at it.

Making a New Year's chandelier with your own hands

How to make a New Year's chandelier with your own hands to surprise your friends with your suddenly discovered talent?

To make a chandelier we take:

• Organic glass or thin wooden sheet.
• Linen rope.
• Multi-colored balls.
• Small stapler.
• We use glass parts left over from an old chandelier.

Description of the manufacturing principle.

We start by cutting a square from plexiglass, the dimensions of which are 50:50 cm. We make holes every 5 centimeters throughout the entire area, as chaotically as possible. We take a linen thread and thread it through the water hole and out into another, adjacent one. The length of the extended ends should be two meters. Let's do it this procedure until we fill all the holes in the square.

We hang this composition instead of a chandelier on the ceiling and continue to decorate the chandelier as christmas tree. We take the balls and tie nylon threads of different lengths to them, and tie them to the structure, concentrating them in the central part. Next we perform the same operation with glass products, but we hang them already at the edges, the length of the thread should be less than on the balls. If you look at the structure as a whole, it will look like an inverted pyramid.

Now you know how to make a New Year's chandelier with your own hands. Start your crafts right now and you won't stop with the chandelier.

IN Lately Decorations for chandeliers such as thread wrapping have become very fashionable.

Description of the manufacturing principle.

We will need a lot of thread and PVA glue, as well as an inflatable ball. Cotton threads are perfect for our project, since the glue applies evenly to them and behaves obediently.

Wrapping inflated balloon threads, apply glue and wait until it dries. Then we simply pop the ball with a needle. Cut a hole on top for the light bulb and you're done. Your result can be compared with the DIY chandelier in the photo.

IN in this example The thread can be completely replaced with lace and you will get a good kitchen lamp.

Instead of a ball, you can use other shapes, such as a juice bag. Choose a sconce online that you like and use the appropriate mold.

Another way in which you can make a wonderful chandelier with your own hands from improvised materials.

If you happen to have embroidery hoops lying around at home, don’t miss out on the opportunity to make a great lamp out of them. The basis here will be the hoop and wire, they will give your lamp the shape you want. You can stretch fabric over the frame or use a hanger. An unobtrusive New Year's garland can serve as an excellent decoration if you attach it in inside lamp If you make not just one such lamp, but several, then in combination they can give your bedroom a completely new and fresh look.