Review of the Starline a92 car alarm. Repair and servicing of passenger cars Operating instructions a92

________________________________________________________________________________________

Car alarm Starline A92

I installed a Starline A92 car alarm at a car dealership that sells Nissan cars. When tested at the dealership, it worked without problems. Yesterday, an attempt to remotely start a car engine was unsuccessful. Because I was late for work and did not make repeated attempts to start the engine remotely. Today, an attempt to remotely start a car engine also failed. Leaving the house early, I made another attempt while standing directly next to my car. And standing near my car, I noticed the following: The car, following a signal from the above-mentioned model, starts, but after 2-3 seconds it stalls. So
about 4-5 times. I also noticed that when the car has already started, the starter continues to spin.
Please help me clarify this problem. The car starts with the key without any problems. Automatic transmission.

It is necessary to check the engine control; judging by the description, the equipment does not see that the engine is running and continues to try to start it. We recommend that you contact the installation center; perhaps you forgot to program it or made a poor-quality connection.

Hyundai i30 car. Signalka starline a92 can. The cursor placed on the icons of any function blinks regardless of whether you activate this function or not and regardless of which function it remains on. Please help me in this matter.

In this model, the icon on the key fob always blinks.

A92 car alarm installed. Today the shock sensor started going off for no reason. I turn it off, it still works. I had to turn off the sensor and additional. shock sensors. What could be the reason?

You need to contact the installers, first try to disconnect the shock sensor from the unit and check the operation.

When you start it from the remote control for the first time of the day, the car stalls after a couple of seconds of operation and the alarm goes off. You have to start it with the key. All subsequent plants from the remote control on the same day without problems. It's 0, +5 outside. What could be the problem?

A Volkswagen Polo car is equipped with a Starline A92 car alarm.

It is possible, but you need to contact the installers and change the connection of the glass control unit.

The car starts and after 5 seconds it stalls and the car alarm works.

Check with the key fob which security zone is triggered and thereby find the source of the problem.

Alarm Starline 92. Everything works without any questions, I recently installed a radar detector on the windshield next to the alarm antenna. It starts from autostart, but only when extending the time it doesn’t seem to see it (the signal is missing). It’s still possible not far from the car, but a little further, even if the car starts, it no longer receives the signal. Is it possible that there is interference from the radar detector? Explained as best I could).

Yes, there may be a problem with the detector, turn off its power and check its operation.

I have this equipment, after driving under a power line the key fob beeps once. After this, the large button does not open/close the machine, only by placing the cursor on the corresponding icon (the small button opens). When I press the big button, the antenna-signal icon does not appear
not getting through. I open only with small buttons. After a few days the big button starts working again. What is this? I changed the battery. I threw off the terminal.

Perhaps it's the mark that's in the crawler!

Tell me the E90 when it’s cold at -20, when I try to start it from the key fob, the starter doesn’t even turn, but when the engine is warm, everything turns and the Kia Seed automatic transmission starts.

A similar problem appears on different cars, and only progresses as cold weather approaches. There is no universal solution here; you need to look depending on the specifics of a particular car.
1. In order for the equipment to give a command to start the engine, a number of events must occur; if one of the events does not pass, then the start is delayed, and after one or more attempts it is terminated. Events are controlled by wiring, which serves as a source of engine starting control, usually this is voltage, a generator, or a tacho sensor. In addition, there are software settings that can be used to adjust these parameters more flexibly. The installation instructions contain all this information; you can try changing the control source or its settings.
2. Also, if the car has a bypass unit for the standard immobilizer, then the problem may be there, i.e. immo does not see the mark and blocks the engine.
3. The battery charge may be low, first check this point.

Please tell me what could be the reason. Cost Starline A 92 car Kia Sid. When you start the engine from the key fob, the car starts, immediately stalls and the siren immediately goes off. Starts well with the key. And this happens when it’s frosty outside.

You need to check the connection, check whether all contacts are isolated, and also check the main unit.

There was a Starline A91 Dialog alarm system installed on a Nissan X-trail with an automatic transmission. Such a problem - about two months ago the car stopped starting from autostart (perhaps this coincided with replacing the battery on the key fob). When you try to start it from autostart, the instrument panel lights up, you can hear the fuel pump whirring, but the starter does not turn, as if there is no signal to it. And so four attempts. At the same time, the car is on the handbrake and in the parking lot. Starting with the key is no problem.

The problem may be in the standard immobilizer; if it is installed on the car, then it is worth checking the operation of the bypass unit. To do this, insert the ignition key into the key without turning it, prepare for starting and try to start the car; if starting occurs, then you need to deal with the bypass unit.

I have a Starline A92 alarm installed on a manual Nissan Qashqai. Such a problem - it often happens that the car starts after 5-6 times (the starter does not even turn). I found out in the services - they told me that I need to close the circuit completely, that is, constantly put the car on the handbrake. Also, when you turn the key to the “off” state, the car does not turn off, if I’m not mistaken, this is a function of the turbo timer and in order to turn off the engine you need to put the car on the alarm. Tell me what to do if I drive up to a place and am not going to get out of the car - how to turn off the engine correctly. And what can be done about the first problem - is it possible to bypass putting the car on the handbrake all the time?

You have a car with a manual transmission. If the equipment is connected correctly, then startup reservation (software neutral) is required, as indicated in the instructions, page 71. Accordingly, you need to complete all the procedures, then the start will work correctly and the engine will turn off when necessary.

The NISSAN NOTE has this alarm. The shock sensor, either 1 or 2, is constantly triggered. Now with the onset of above-zero temperatures, the siren goes off, and today it started snowing, so does it scream every 5 minutes? What is the reason?

The reason is the installation of a shock sensor, its settings, contact the installers directly to resolve the situation.

I have a 2005 Mercedes A200 with a Starline A92 signaling system. I do not have (or have not connected) auto engine start. At the service center they said you need a launch unit.

If you have a Starline A92, then it already has a launch unit integrated into its unit.

Please tell me how to disable the periodic autostart mode on the StarLine A94 system (Toyota Camry 50). And I also wanted to ask: does the application on the iPhone depend on the balance of the machine?

Disabling autorun depends on what event triggers the launch; all options are listed in the instructions, 81.

Please tell me what the problem might be. Car alarm Starline A92 dialog when starting from the key fob, the mazda 3 car starts and immediately stalls, and so 4 attempts to start the engine, then the inscription on the key fob is OS T. Starting from the key without problems?

The reasons may be an incorrectly selected or configured engine start control, or somewhere the equipment loses a signal.

Any icon on which the cursor is placed blinks. What to do?

This means that you have entered the cursor function selection mode, but the fact is that if you do not press any buttons, the key fob will leave this mode after 2 seconds. The cursor method is activated by pressing the circle key 2 or more times until you press it, the cursor will appear after 2 seconds
will go out. If this does not happen, try briefly removing the battery from the key fob and putting it back in.

Two months ago, a StarLine Twage A 92 CAN alarm was installed on our new Mitsubishi Lancer X car at the service center at the dealership.

After a month and a half of operation, it became difficult to arm and disarm the vehicle by briefly pressing the large button (No. 1): the function sometimes works on the fifth or sixth attempt, on the first - much less often. Please indicate the possible cause of this problem.

I have a Starline A92 can car alarm on a Nissan Qashqai, the car is not armed, the auto start does not work, when I press the close button, the upper left icon on the key fob lights up and the car does not react at all, how can I fix it?

If it doesn’t respond to the key fob at all, try registering it in memory.

Tell me, please, I changed the battery on the key fob, but the car alarm doesn’t work, I can’t install other icons, what should I do?

Check the polarity and reliability of the contact. If there is an indication on the key fob, then try programming the key fob again.

Please help me remove the anti-robbery function on the Starline A92, turned it on or pressed something, now there is a gun on the key fob or something similar to it, in general the anti-robbery function and the car does not start or open, how can I unlock this function? The book says that you need to enter some codes - tell me what and how to press?

Disabling is carried out according to the instructions.

The Mazda 3 has an A94 car alarm installed, the auto start does not work, it starts and stalls 4 times, OS7 is displayed on the screen.

What could be the reasons?

This is the inscription OST, which means that all 4 attempts have been exhausted. The problem is either in engine control or in the immobilizer bypass.

My friend and I have the same model. Question: why does he press one button when he starts the car from autostart, and I press two (1 and 3). How can this be corrected? mine sometimes doesn't work.

For remote start on the main key fob, the start icon is selected using the cursor method and confirmed by pressing button 3; on the spare key fob you have to press buttons 1 and 3 sequentially.

When autostarting, the starter fires, but the engine does not start, but after standing for two hours in a warm box, the autostart starts working.

If the attempt fails, try leaving the key in the ignition and attempting a remote start from the key fob; if this happens, then the reason is in the immobilizer bypass.

The car is not armed. At the same time, the following signs appeared on the key fob display: the ignition is on, the parking brake is not applied, the engine is running.

Starline a92, will it fit a 2008 DODGE Avenger 2.4AT? I'm interested in the autostart and how the standard key works to open and close the doors.

You can install using a manual connection; the manufacturer does not declare CAN support for this car, so the operation of the slave function is not guaranteed.

Is it possible to install a Starline A92 car alarm on a Mitsubishi Colt 2005.

Yes, you can, the connection will be a regular analog one.

Why does the first icon on the bottom left blink? What is this connected with? (The icon consists of two arrows in a circle).

This is normal, a feature of the keychain.

Tell me, what is the reason? I had a Starline A92 car alarm with auto start installed 2 weeks ago. The next day the glitches started.

The autoradio constantly gets confused when starting, sometimes the autostart does not start even from 15 meters, you put it on the alarm, it shows a lock on the key fob, but the door does not close. Or, on the contrary, everything is closed, but when it opens, it works. I'm already exhausted with her. Is it the installer's hands or a faulty signal? The quality of the keychain is poor, the whole thing crunches and falls apart.

The location of the car alarm antenna module and its wiring may be incorrect.

1. Starline A92 does not enter service mode. The button is pressed 5 times.

The LED blinks. The ignition input is supplied with + to the yellow wire. no reaction. 2. how to reset the auto code programmed through channel settings?

3. how to do a general reset (including channel settings)?

See PIN instructions. Entry into programming is carried out strictly according to the instructions. If you have problems with this, you need to contact support.
I would like to install a 2012 Mitsubishi Colt Plus on a car. The car has a CAN bus, the question is: is it possible to control the electric trunk drive (opening/closing the trunk door) via the CAN bus?
This model does not support Colt via CAN; the situation is similar for other models.

Now this model comes with only one relay; it can be used to block the engine from starting. You can, while inside the car, put the device in security mode and start the engine; if the alarm does not allow you to do this, then the installers have connected the lock. Some installers do not use complete relays; they trust their own - relays are inexpensive consumables. But, if the engine starts in security mode, then contact the installers and find out where they connected the lock and whether it is connected at all.

My situation is as follows: I purchased a Toyota Camry 2.5 from the office. dealer with an intelligent keyless entry and engine start system, installed Starline A92. Is it possible to maintain intelligent access and autostart of the car and how to implement it. I was told that it is possible, but when autostarting, the serena will scream for the first 10-15 seconds, and then it will start and the serena will turn off.

The manufacturer does not indicate such restrictions, but you can clarify them by directly making a request. And in any case, since the car is equipped with a standard immobilizer, it will be necessary to bypass it, otherwise the auto engine start will not work.

Is it possible to increase the autostart range and how?

It is possible if you connect a compatible M21 GSM module to this model.

The control and feedback radius of the equipment, in this case, will be limited only by the coverage area of ​​the network of the cellular operator whose SIM card you install in the device.
The Starline A92 generally works correctly, but recently, after a remote start, when you press the brake pedal (to engage a gear), the message “door open” flashes on the instrument panel display, after which the engine stalls. Of course, the engine is already warmed up and starts easily from

buttons, but this has never happened before. FF3 car.

Here you don’t need to contact the installers, since such problems are usually associated with the wiring of the car or due to an initially incorrect connection.

It is necessary to check the connection of the wire that controls the operation of the engine, since if for some reason the alarm system believes that the engine cannot be started successfully, then it resets the start attempt, and the possibility of starting is checked using the control wiring. This
the main reason, there are others, but they need to be checked on site with the installers.

Please tell me how to extend the engine operating time before starting. There is a desire to set the operating time - 30 minutes.

Currently, r10, the instructions talk about extending the operating time with the engine already running, but I would like it to be initially set to 30 minutes.

Can be programmed 30 min. engine operation after switching autostart to constant mode, for this purpose function 2 is programmed; the installation instructions indicate the setting method, pp. 66-68.

Citroen C4 aircross standard car alarm with immobilizer and chip in the key. Starline A92 installed. One key in the crawler. When you arm the car, when starting it with the key, the siren turns on, but the engine starts and you can even drive the car. On all previous cars (even with an immobilizer and a crawler), the car with security from the key (original) did not start, which needs to be changed in the settings, naturally without losing the auto-start function, so that the engine is also armed, or this is an installation defect, or a defect equipment?

If the alarm allows you to start the engine while the siren is working, then you need to check which circuit the engine blocking is connected to, such work is not normal, most likely the installers did not check this point, you need to contact them directly.

Starline A92, should the installed icon blink when everything is calm and we are at home, i.e. by default? What needs to be done to prevent it from blinking, annoying, and the power runs out quickly?

There should be blinking - this is normal. Move the cursor to the left icon in the bottom row so as not to accidentally enable a particular function.

The problem with Starline A92 is that when armed, it goes off every 20 minutes. - 30 min. turns off and works again, and until you open and close the door, then silence again for 20 minutes.

By Citroen C4 sedan. At the moment the car is put into autostart mode - (handbrake, pull out the key, open the door and get out of the car - and at that moment) the message “fault in car electronic alarm” lights up on the car’s on-board computer and additionally, separately
the "SERVICE" sensor lights up in the speedometer well - the engine is running. At the moment of arming, the engine stalls, the locks close, but the “SERVICE” sign turns off and goes out only after 30 seconds. And the outside mirrors stopped folding. Although before installing the alarm, when closing the doors using the standard key fob, they folded.

This model is connected via a CAN bus, which, on the contrary, should minimize conflicts with the standard equipment of the car.

NISSAN X-trail T-31 2007 Is this model integrated with the CAN bus or an analog connection?

Integrated, i.e. You can use a CAN connection during installation.

I bought a car with a Starline A92 alarm system, but there are no instructions for it, how can I find out the model of this car alarm?

The model must be indicated on the display key fob, as well as on the main unit.

What is the range of the Starline A92 in urban conditions.

The signal transmission here is carried out via a radio channel, which is influenced by a lot of radio interference, of which there is always a lot in the city, so the distance can vary significantly: from 100 to 800 meters, it all depends on the specific conditions.

Tell me, as far as I understand, an automatic can be connected to a VW Polo sedan 2013 car via the CAN bus, but how can you use heated seats, windshield, and raising all windows? And about turning off the wipers and music, I wonder how this happens.

You can connect via CAN; as for other functions, you need to use regular analog connections, and to raise the windows, if the car did not initially have such a function, install a block on 2 windows.

Car alarm Starline A92 is a domestic security system, the main advantage of which is the alarm clock or temperature.

The operating range of the device can reach 2000 meters, which is very convenient in urban areas.

[Hide]

Technical characteristics of Starline A92

1. The Starline A92 signaling has the following characteristics:
2. Operates at frequencies from 433.05 to 434.79 MHz. This makes the anti-theft system much safer compared to other security systems.
3. The dialogue code protects an individual 128-bit encryption key from hacking.
4. A new method of “frequency hopping” is used, which significantly complicates the process of hacking the signal. The 128-channel narrow-plane transceiver increases the range of the key fob. When transmitting commands to the block, the range is 800 meters, if the transmission comes from the block - 2000 meters. The maximum operating distance of the second key fob is 15 meters.
5. The temperature at which the security system stably performs its work, according to the developer, is -40 - +85 degrees.
6. The current voltage ranges from 9 to 18 mA. In security mode, it can reach up to 25 mA.

The shock sensor is piezoelectric type. Its main advantage is the recording of any mechanical effects on the vehicle. In addition, it can be used in conjunction with another security system, if necessary.

Equipment

• The standard configuration of the StarLine A92 car alarm includes:
• signaling center block;
• keychain with two-way communication and LCD screen;
• key fob with two-way communication without LCD screen;
• screen sensor with two-level system;
• transceiver;
• hood button;
• one LED;
• service button;
• set of wires for connection;
• engine temperature sensor;
• installation instructions;
• manual;

User's note.

Car alarm system Starline A92

Advantages and disadvantages of the system

• The advantages of the StarLine A92 signaling system include:
• Russian language in the key fob, which makes control accessible;
• simple installation process that does not take much time;

long range and significant degree of protection.

• Among the disadvantages of the Starline A92 alarm system, the following are noted:
• excessive sensitivity of individual keys;
• response to accidental button presses;

Incorrect operation of the security system in severe frost.

Step-by-step instructions for installing the Starline A92 system

Step-by-step instructions for installing the Starline A92 security system:

1. The central block is placed out of sight. The device can be installed under the tidy, the main thing is that moisture and heat do not get on it. Fastening is carried out using self-tapping screws and tape.
2. The transceiver module is mounted on the windshield. The antenna is installed so that the metal parts of the body, rain and light sensors are at a distance of at least five centimeters. It should not be placed in a place where there is tinting or a sun strip.
3. The siren is installed in the engine compartment of the car, away from moisture and heat. The horn should be placed with the horn facing down.
4. The shock sensor is fixed with a metal tie or tape.
5. The temperature sensor is secured with cable ties to the cooling system pipe near the engine block.
6. The LED is installed in a visible place on the dashboard.
7. The hidden button is mounted in an accessible place so that it is not conspicuous.

Photo gallery

Arrangement of buttons on the key fob for setting functions.

An overview of the Starline A92 signaling key fob and its main functions is presented in the author’s video from the channel Alexander Shkurevskikh.

How to remotely start the engine?

To remotely start the power unit you will need:

• Fix the automatic transmission in position “P”;
• activate “software neutral”;
• close the hood;
• put the car on the handbrake.

To remotely start the engine you need:

1. Select the icon with the image of ventilation and press the “3” button on the key fob.
2. Press button “1” until a sound signal appears.
3. Then press button “3”.

Setting up autorun

Automatic start of Starline A92 makes it possible to configure the start of the car with a key fob by:

• time;
• temperature;
• alarm clock

Setting by time

The step-by-step process of setting up the engine autostart according to time looks like this:

1. The clock icon is pressed.
2. Next, click the “3” key.
3. The same button adjusts the required autostart time. (If you press this combination again, you can extend the time).

To disable this function, you must use a combination of 1 (long) and 4.

Setting by temperature

This function allows you to select from existing temperature modes. Next, the time after which it will be activated is determined (the shortest interval is an hour).

This option is configured by pressing the “thermometer” and button “3”. The car will give a light signal with its headlights and the temperature at which auto start will be activated will appear on the key fob.

Alarm setting

Instructions for setting up auto-start alarms:

1. Click on the clock image.
2. Next, click on the “3” button.
3. After this we set the required time.

To disable the option, place the cursor on the indicator with a clock image.

Reasons for the impossibility of autostart and ways to eliminate them

There are various reasons why autorun may not work:

1. Incorrect use of the alarm by the owner. For example, untimely completion of the “software neutral” procedure.
2. Damage to security system elements, such as sensors.
3. Installation error.

If the car owner’s mistake does not allow the car to start automatically, then you should read the documents that come with the alarm. It also describes the correct connection of all connectors.

Safety precautions

When installing and operating the Starline A92 alarm system, you must follow safety precautions:

1. The machine should not be located in an enclosed area without ventilation.
2. The vehicle must always have the parking brake on. In this case, the box must be in neutral or in “parking” mode.
3. You need to start the engine after making sure that there is no one near the car.
4. Do not give key fobs to strangers.
5. Check all fluids and systems.

Download installation and operating instructions for Starline A92 in PDF format

You can download the operating and installation instructions from the links below:

Video

The Starline A92 alarm is one of the best car alarms on the market today in terms of price and quality. One of the advantages of the “alarm” is remote control using the Starline A92 Dialog key fob. In city conditions, the device works flawlessly, without reacting to interference. The installation is designed for 5 years of active operation.

The operating range of the device can reach 2000 meters, which is very convenient in urban areas.

Specifications

The alarm has the following characteristics:

1. It operates at a frequency from 433.05 to 434.79 MHz, which guarantees greater security compared to other “signals”.
2. To protect the dial code from hacking, individual 128-bit encryption keys are used.
3. Additionally, a relatively new method of frequency hopping is used, which makes hacking the security system much more difficult. Thanks to the 128-channel narrowband transceiver, the range of the key fob increases. In the mode of transmitting commands to the block, the range is 800 m², from the block - 2000 m². The maximum range of the second key fob is 15 m².
4. The operating temperature at which the “alarm” is able to efficiently perform its function, according to the developers, ranges from -40 to +85 degrees.
5. The DC supply voltage is 9-18 mA, in security mode it reaches 25 mA.
6. Shock sensor type: piezoelectric. The advantage of this type is that it can record any mechanical effects on the car. In addition, it can be combined with other alarms if the need arises.

An overview of the Starline A92 car alarm and all its functions can be seen in the video below. Taken from the autoPulse channel. ru.

The shock sensor is piezoelectric type. Its main advantage is the recording of any mechanical effects on the vehicle. In addition, it can be used in conjunction with another security system, if necessary.

The standard equipment of the Starline A92 car alarm includes:

• central alarm unit;
• key fob with two-way communication and liquid crystal display;
• key fob with two-way communication without LCD display;
• two-level screen sensor;
• transceiver;
• transceiver;
• Light-emitting diode;
• one LED;
• set of wires;
• engine temperature sensor;
• engine temperature sensor;
• user manual;
• manual;

Car alarm system Starline A92

Advantages and disadvantages

Reviews from owners of the Starline A92 car alarm are mostly positive. Among the advantages, it is worth noting the clear display of the key fob in Russian with accessible controls. Those who installed the alarm system themselves talk about the ease and simplicity of installation. I am pleased with the level of reliability and range.

According to some users, cons are extremely rare. Malfunctions are associated with the operation of the key fob, which can respond to an accidental press while in the owner’s pocket or purse. There have been complaints that the security system does not work the first time during severe frosts. We were talking about turning it on on the third attempt at a temperature of -20 degrees.

Installation instructions

You can install a car alarm yourself, but it would be better to install it with the help of specialists.

Step-by-step installation of a car alarm looks like this:

1. We place the central block in a hidden place. This could be the area under the dashboard, as long as you avoid moisture and heat. You can secure it using self-tapping screws or tape.
2. We attach the transceiver module to the windshield. The antenna must be positioned in such a way that there is at least 5 cm remaining from metal body parts, rain and light sensors. It cannot be placed in areas where tinting or sun protection strips are applied.
3. The siren is located under the hood of the car, away from sources of heat and moisture, with the horn facing down.
4. The shock sensor must be secured with a metal tie or tape on a metal surface.
5. The temperature sensor is secured with cable ties to the cooling system pipe next to the engine block. Can be placed on metal parts adjacent to the engine using an M6 screwdriver. Do not install near the exhaust manifold. The correct inclusion will depend on the correct location.
6. The LED indicator is installed in a visible place on the dashboard.
7. The hidden button should be installed in an accessible place, but not conspicuous.

Location of buttons on the key fob for setting functions

Setting up autorun

Intelligent start Starline A92 Dialog allows you to configure automatic engine start using the key fob by:

• time;
• temperature;
• alarm clock

Before programming, on cars with manual transmission you need to put the gearbox in program neutral. More details on how to do this are described in the instructions. Cars are automatically transferred to the parking position. To prevent the car from moving during installation, you should put it on the handbrake. The hood and trunk must be closed.

Configuring autorun by time

Step-by-step programming looks like this:

1. Click the icon with the image of a clock.
2. Then press key 3. The same button, immediately after enabling the option, adjusts the autorun time.
3. By pressing this combination again, you can extend the autorun time.

To disable a custom function, use a combination of one (long) and four (short). You can choose another option - an image of a fan with blades and a two.

Temperature trigger setting

You can choose from the programmed temperature settings the one that suits you perfectly. Then program the time after which the mode will turn on. The shortest interval between starts is 1 hour.

The setting is done by clicking on the thermometer image and the three. The car's lights will flash, and the key fob will display the temperature that must be present for autostart to occur. After which the current time will be displayed on the screen. To disable the option, you need to move the remote control cursor to the indicator in the form of a thermometer.

Setting the alarm to start

To configure, just click on the clock image and the three. Then set the desired time. To disable the autorun option, you need to move the remote cursor to the clock-shaped indicator.

Possible faults

When setting up autostart yourself, the car owner may encounter malfunctions that may be caused by incorrect installation of the security system.

To correct it, just carefully re-read the technical documentation again. Program neutrality may not have been maintained. Sometimes the problem is due to an initial malfunction of the sensors. In this case, you need to resolve the issue with specialists.

Description

The A92 CAN car security system implements a full range of security and service functions:

The interactive control code with individual 128-bit encryption keys eliminates intelligent electronic hacking and is resistant to all existing code grabbers. To protect the code, the most advanced conversational coding algorithm currently available, as well as the innovative frequency hopping method, are used. In this method, during the transmission of commands, a specialized transceiver repeatedly changes frequencies according to a special program during the period of each transmission. A solution of this level, known by the technical term “frequency hopping spread spectrum technique,” ​​is the first in the world to be used in an alarm control system and is a very significant complication of any code-breaking attempts.

Megacity mode. Increased control and warning range, as well as reliable operation in conditions of extreme urban radio interference, are ensured by the use of a 128-channel narrowband patented transceiver with frequency modulation and narrow bandwidth. A specialized signal processing program, narrow-band filters, as well as reception and transmission channels optimally distributed along the edges of the 433.92 MHz frequency range allowed us to improve the signal-to-noise ratio by 8-10 dB and double the range and noise immunity.

Intelligent autostart. StarLine A92 CAN is designed for remote and automatic engine starts. A special StarLine Smart Start interface controls the process of remote starting and operation of any engine. Automatic starts are possible at a predetermined time, when the temperature drops below a specified limit, and regular periodic ones. StarLine A92 CAN has an upgraded engine voltage control algorithm, which allows you to reliably register the start of engine operation and simplifies installation, allowing in some cases not to look for tachometer or generator signals.

Ergonomics and reliability of the key fob

The key fobs have an innovative design and a hidden antenna location. This allows you to increase the reliability of the key fob design and implement an ergonomic control method. The new 4-button control interface adopts the “master button” principle. The easy-to-find main button performs the main alarm command - arming.

Comfort

The key fobs implement an intuitive control principle. All pictograms on the keychain are in Russian. LED backlighting ensures comfortable work with information on the display.

Full protection

The “dialogue” encryption code is used in both the main and additional key fobs.

Additional functions

For the first time in alarm systems, it is possible to receive quiet confirmation signals on the most common 12 V sirens.

Benefits for installers

The function programming algorithm has been modernized. Now online on the key fob display you can see the function number and its programmed value. The control of additional channels has been modernized, allowing the installation of the StarLine A92 CAN system on all modern cars. StarLine A92 CAN models can be easily transformed into a security and search complex by adding one of the StarLine GSM/GPS modules, which will connect to the alarm system via a local network via one single 3-pin connector. The built-in CAN interface allows for quick and qualified installation of alarm systems on modern cars equipped with a CAN bus. Instead of the standard 15-30 connection points, only 6-10 connections need to be made.

In addition to standard information about the state of the ignition, doors, hood, trunk, the CAN bus receives signals confirming engine starting, which is convenient for starting systems. Also, via the CAN bus, the central locking, closing the windows, opening the trunk, and controlling the standard alarm are controlled.

StarLine A92 CAN systems are compatible with more than 150 vehicle models.

Equipment

Central alarm unit
1 key fob with two-way communication with LCD
1 key fob with two-way communication without LCD
2-level shock sensor
transceiver
hood button
Light-emitting diode
service button
set of wires
engine temperature sensor
installation instructions
user manual
User's memo

To protect their car as much as possible from theft and burglary, drivers use car alarms. The best of its kind starline a92 dialog CAN flex will provide maximum protection due to its characteristics. Thanks to the included remote control, protection is carried out at a distance. In addition, thanks to starline a92, you can configure the engine to start automatically at a certain time or at the desired temperature.

Car alarms also have a useful advantage - uninterrupted operation in large cities where there is a lot of interference. And the instructions and installation guide will simplify the installation process. In addition, the alarm can be registered for a specific car. And the “autostart” function will make life easier for many motorists. Thanks to the presence of the transmitter, you can use many service functions of the car from a distance. The transfer is carried out using a special encrypted code. This provides additional protection against code grabbers. Plus, the code is transmitted at hopping frequencies.

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline!

Car alarms can be installed either independently or in technical installations. services. The reason is that starline a92 dialog CAN flex has a standard design. But when installing it yourself, you must have a good knowledge of the car’s structure, not only in theory. In addition, you need to stock up on patience, time and measuring equipment in order to correctly connect the wires that supply power and control the autostart.

What is included

• Wires
• Two keychains. One with LCD screen, the other without;
• CSB (Central Alarm Unit);
• Transceiver (provides communication between the key fob and the central control system);
• Hood button
• Light-emitting diode;
• Service button;
• Engine temperature sensor;
• Installation instructions;
• User guide;
• User manual.

Wires are needed to connect all parts of the alarm. In addition, they are used to connect the central nervous system and the vehicle ignition. This, by the way, is an important and necessary point. The key fob is needed to control auto start, service functions and notify the owner of an attempted break-in or theft.

The kit comes with two remote controls. The second one is a spare. No one is immune from unexpected unpleasant incidents. Breakdown or loss will not leave the motorist without remote control of the car. True, the second key fob does not have a screen, which is certainly inconvenient. But buying another key fob and “teaching” it a special car code is not difficult.

The central alarm unit is the “brain” of the entire system. It receives a signal, decrypts it and performs a specific task. The transceiver is usually mounted on the windshield. With its help, the code is received and transmitted from the remote control to the central control system. The hood button is necessary so that the owner has a free access to this part of the car. In addition, the alarm housing is installed next to the fuses, and the limit switch is installed above the left headlight. This provides additional protection against hacking. The limit switch is needed to send a signal to the remote control in case of unauthorized opening of the hood.

The LED informs the owner that the alarm is working. The starline a92 dialog can flex service button performs the same functions as the button on the key fob. The operating instructions and installation guide guide you through installation and use. But in order for autostart to be controlled correctly, it is best to contact specialized technicians. Services.

The key fob transmitter is an important thing for protecting the car and managing its service capabilities. Therefore, its appearance and properties meet all the owner’s requirements. This means that the body is made in accordance with the requirements of convenience. Convenient placement in the hand is not everything. The key fob is shaped in such a way that the owner can easily and quickly find the necessary buttons by touch. The keys themselves are convenient, informative, and notify the owner that the selected command has been completed. Often it's just click after click.