Kraftool metal scissors for cutting plastic corners - https://goo.gl/GTjBnB How to glue plastic corners onto slopes! Sooner or later, but any repair fortunately comes to its end. And we have a lot of different surfaces that need to be somehow combined into one pattern. Wallpaper on the walls is adjacent to plastic slopes, ceramic tiles in the bathroom rest against a wooden door frame, arched ceilings hang over decorative plaster...How should we frame all this correctly?! PVC plastic corners will help us! Video No. 79 - “How to glue plastic corners onto slopes”! By the way, it is not so important how to glue the PVC corners and where (door slopes, bathtub, windows), it is much more important than gluing the plastic corners. For such cases, liquid nails and a sealant gun have long been available. To learn how to properly cut plastic corners and then glue them onto the slopes, watch our video No. 79! Our construction and extremely educational channel "PiK", and a simple video on how to glue PVC plastic corners on window slopes- https://www.youtube.com/c/Guysstone Also, don’t forget about the page on VKontakte, which contains more than one video on how and with what to glue not only corners, but also wallpaper, baseboards, slopes - https:/ /vk.com/guysstone Our Instagram with photos from the world of repair and decoration - https://www.instagram.com/guys_stone_/ See also a selection of video tutorials on how to glue plastic corners with your own hands on windows and doors: No. 20 How to use a sealant gun - https://youtu.be/VmCh_Vw6KyQ No. 63 How to glue plasterboard slopes - https://youtu.be/pvrtu8H2cBo No. 78 How to install a plastic baseboard - https://youtu.be/7GRDeGPEMxA Glue plastic corners important question, and if you know what to glue them with, then there is an answer! How to glue the plastic corners on the slopes! Sooner or later, any repairs fortunately coming to an end. And we have a lot of assorted surfaces that need to be like that and than connect one pattern. Wallpaper on the walls side by side with the plastic slopes, ceramic tile in the bathroom ... How are we to frame it all right?! Our help are the PVC plastic corners! Video No. 79 - "How to glue the plastic corners on the slopes!" By the way, it is not as important as PVC paste corners and where (door slopes, bath, window), much more important than to glue acrylic plastic corners. For such cases, there has long nails and liquid sealant gun. #Plastic Corners #Slopes #PVC
When the doors and windows are installed, you need to finish the slopes; as a rule, this is the final stage. To hide small roughnesses and give a complete aesthetic look, many people use ready-made corners. How to correctly cut and glue a corner made of plastic, cork or MDF? Below are detailed recommendations for their installation.
Let's start with the most important thing - why is this necessary? What role do the corners play - only decorative or do they have more serious functions? Let’s not argue with the fact that if you frame the slopes of doors or windows with special decorative elements that fit perfectly into the design of the room, then the interior will immediately change for the better.
Corners will protect slopes from damage
But besides this, they also perform a very important protective function. Sooner or later you have to carry large items through the opening, which can damage the corners, and you can simply accidentally touch the outer corner and damage it. There can be a lot of situations, the main thing is that the result is the same - a damaged surface and, accordingly, a damaged appearance. In addition, as practice shows, most often the wallpaper begins to peel off in these places. So it is best to protect the outer corner of the slope with the help of a decorative element, which will also transform the interior.
Corners are not only protection, but also a neat aesthetic appearance
Plastic, wood or MDF - which one to choose?
Having made sure that the installation of corners is not just a whim, but a necessity, we will study the construction market in order to make right choice. These products are divided into types depending on the material from which they are made. So, the corner can be plastic, wooden, bamboo, made of cork or MDF. Absolutely each type has its own pros and cons; let’s look at them in more detail.
To trim the corner, use a fine-toothed hacksaw
How to glue
Finally, we got to the main question, how to glue the corners onto the slopes. However, before proceeding directly to fixation, you should carry out, so to speak, fitting. Once you are sure that everything is trimmed correctly, you can move on. Apply to inner part corner, at the junction of the sides, adhesive solution in increments of approximately 10 cm. At this stage an indispensable assistant there will be a mounting gun. After this, quickly press the product to the surface and fix it in this position. masking tape. You should start with a horizontal slope, and then proceed to the side slopes. We remove excess sealant from the surface of the walls with a damp cloth and let it dry thoroughly. You can remove the tape only after 24 hours.
Video: attaching corners to window slopes
Thus, plastic corners can be placed on the slopes of a window or door. As you can see, there is nothing complicated in this process.
Video: how to cut and glue corners to door slopes
Having figured out what such products are made of, what their features are and having decided on the choice, you should learn how to install corners on slopes. detailed instructions is given below.
Windows are responsible for many parameters. This is a source of natural light and ventilation, they regulate the heat and sound insulation of the room. However, everyone will agree that this is also part of the interior, so they appearance very important. Therefore, let's look at how to glue corners to slopes.
Why is it necessary to install corners on slopes?
Let's start with the most important thing - why is this necessary? What role do the corners play - only decorative or do they have more serious functions? Let’s not argue with the fact that if you frame the slopes of doors or windows with special decorative elements that fit perfectly into the design of the room, then the interior will immediately change for the better.
But besides this, they also perform a very important protective function. Sooner or later you have to carry large items through the opening, which can damage the corners, and you can simply accidentally touch the outer corner and damage it. There can be a lot of situations, but the main result is the same – a damaged surface and, accordingly, a damaged appearance. In addition, as practice shows, most often the wallpaper begins to peel off in these places. So it is best to protect the outer corner of the slope with the help of a decorative element, which will also transform the interior.
Installation of corners on slopes - which product to choose?
Having made sure that installing corners is not just a whim, but a necessity, we will study the construction market in order to make the right choice. These products are divided into types depending on the material from which they are made. So, the corner can be plastic, wooden, bamboo, made of cork or MDF. Absolutely each type has its own pros and cons; let’s look at them in more detail.
Plastic corners are made by hot bending a sheet of polyvinyl chloride. Basically, they have the same shelf width - from 10 to 40 mm in increments of 5 mm. However, there are asymmetrical specimens, for example, 10x25 mm, but regardless of this parameter, the angle between the sides is 90 degrees. If it is necessary to transform an arched opening, this is done using a special flexible profile. Their advantages include their relatively low cost; they do not require painting, unlike wood.
The next type is cork corners. Such decorative elements quite often used for arched openings, but this does not mean that their use is limited only to this area. They can also be used for finishing slopes various shapes. Cork has a number of advantages, including strength, fire resistance, practicality and environmental friendliness. In principle, this material has practically no disadvantages, except that if your pet wants to sharpen its claws on it, this will damage the surface.
It is also worth noting wooden and bamboo products, which will always be signs excellent taste and will fit into almost any interior. In addition, we must not forget about their environmental friendliness. True, such elements are somewhat more expensive than their counterparts made from other materials, and besides, they often require painting. More from natural wood You can also compare a material like MDF, only it costs significantly less, because wood dust is used to create it.
It can be seen that the range is quite extensive, and there is plenty to choose from. But what should be guided by this? Of course, no matter how much we would like to, the budget is almost always limited. Therefore, first of all, we have to proceed from our financial situation. As stated above, plastic products have a very reasonable price, while their appearance is not much inferior to their analogues from natural materials. But, in addition to the price, you should also pay attention to the fact that these decorative elements fit harmoniously into the design of the room.
For arches, you should purchase special arched corners of different sexes; they ideally maintain their position when bent. Please note that the wider the sides of this element, the greater the load it can withstand.
How to glue corners on slopes - we can do it ourselves
Having figured out what such products are made of, what their features are and having decided on the choice, you should learn how to install corners on slopes. Detailed instructions are given below.
How to glue corners onto slopes - step-by-step diagram
Step 1: Selection of materials
In addition to the corners themselves, we will also need an adhesive composition with which we will fix the selected element. When choosing it, it is worth remembering that quite often, especially if it is necessary to glue a narrow product, the glue seeps out from under it and, naturally, ends up on the walls. As a result, the latter may be damaged, which, accordingly, will negatively affect the appearance of the room as a whole. Therefore, you should choose this adhesive composition, the excess of which can be removed from the surface. Transparent silicone sealant works great.
Step 2: Surface Preparation
Basically, corners are glued to new slopes, but nevertheless, check that the surface is relatively flat, since large bumps cannot be hidden by any decoration. It should be free of foreign objects such as nails, screws, etc. It also needs to be degreased; white spirit is suitable for this purpose.
Step 3: Measurements
So, now it’s time to decide on the number of elements. We take the necessary measurements (height and width of all door doors, as well as window openings, where the corners will be installed). Please note that they usually have a length of 2.5–3 m, so for each vertical door slope one piece will go away. To save money, trimming can be used only if one trim is enough for the entire side, for example, a window opening or the upper slope of a door. Otherwise, the joint will be noticeable and will spoil the whole picture.
Step 4: Trimming
Before discussing how to attach corners to slopes, you should find out how to trim them. After all this stage of all, is the most labor-intensive and, perhaps, even the most important, since it determines how much their edges will join, and this directly affects aesthetic appearance the entire room. It is best to trim with a fine-tooth hacksaw. First you need to measure the length of the opening, then we put marks on the corner itself so that the segment corresponds to this parameter. Next, we cut off the part that will be adjacent directly to the slope strictly according to the marks, and the part that will be adjacent to the wall at an angle of 45°.
Step 5: Installation
Finally, we got to the main question, how to glue the corners onto the slopes. However, before proceeding directly to fixation, you should carry out, so to speak, fitting. Once you are sure that everything is trimmed correctly, you can move on. We apply an adhesive solution to the inside of the corner, at the junction of the sides, in increments of approximately 10 cm. At this stage, a mounting gun will be an indispensable assistant. After this, we quickly press the product to the surface and fix it in this position with masking tape. You should start with a horizontal slope, and then proceed to the side slopes. We remove excess sealant from the surface of the walls with a damp cloth and let it dry thoroughly. You can remove the tape only after 24 hours. This is how plastic corners are installed on window or door slopes. As you can see, there is nothing complicated in this process.
After the plastic windows are installed, it is necessary to carry out finishing work, which involves the installation of external and internal slopes. There are several ways to install them: you can attach them to a pre-installed installed frame or glue the slopes to the windows using various adhesives.
Types of materials
Work can be performed using the following materials:
Mounting method on polyurethane foam
You can glue the slopes to the windows using polyurethane foam. This is a universal material with high degree clutch. How to glue plasterboard slopes in this way is shown below.
Why should you choose plastic products?
Plastic is the most common and universal material.
Plastic slopes are most often installed This is due to his performance characteristics and ease of installation. The advantages of plastic slopes include:
- Easy to care for the surface - just wipe the plastic with a cloth and soapy water;
- High-quality plastic does not fade when exposed to sunlight;
- Plastic looks best combined with the surface of the profile plastic windows;
- The service life of these products is calculated in decades;
- For plastic slopes, when insulating them, you can use mineral wool. In this case, heat loss is reduced through window design and the effect of window fogging is eliminated;
- The moisture resistance of the plastic is obvious, so it does not collapse under the influence of condensation;
- Simple installation - the parts just need to be treated with adhesive and fixed to the surface of the base.
Installation
Glue plastic slopes Can traditional way- on polyurethane foam. This installation has some differences from that used for plasterboard slopes.
What is liquid plastic
Liquid plastic has recently appeared on construction market. It has found application in many areas, including the installation of plastic slopes.
Liquid plastic is used for gluing plastic slopes Liquid plastic is a type of modern sealant that can be used as glue when attaching plastic slopes. The content of liquid PVC in its base gives this material many positive qualities.
Mode of application
Using this glue, you can guarantee strong adhesion between the material and the surface.
Using liquid plastic when processing joints and seams, you can be sure that it will never become yellow, as happens with silicone analogues. This ensures a neat appearance of the window opening.
When temperature changes indoors, plastic panels secured with silicone may lose their joint tightness. And the panels, placed on glue in the form of liquid plastic, will stay in place for many years.
When working with this material, it is important to consider that it hardens in one minute. This is the interval during which it is necessary to apply it and distribute it over the surface. You need to work quickly and efficiently the first time.
It is also worth considering that liquid plastic is quite toxic due to the chemical reaction, therefore, when working with it, you must use a respirator and ensure an influx fresh air into the room.
It should be noted that after the glue based on liquid PVC dries, it will become absolutely harmless to environment and people.
Positive qualities of liquid plastic
The appearance of this modern material did not go unnoticed by the specialists involved in the installation metal-plastic windows. For them, the question of how to glue plastic slopes has disappeared forever. Liquid plastic is characterized by the following positive qualities:
- When processing joints, the highest degree of sealing is achieved;
- It cannot be washed off with water, like its silicone counterpart;
- It does not turn yellow over time, does not emit or absorb foreign odors;
- The material does not change its qualities even after 10 years;
- It is moisture resistant;
- Does not rot or become moldy;
- Does not collapse or fade when exposed to sunlight;
- Resistant to mechanical stress;
- Has an affordable price.
If you glue the slope onto liquid plastic, you get a neat monolithic structure.
An important part finishing works indoors – protection corner lines walls from possible damage. Even after a quality repair, wallpaper on the corners, as well as door and window slopes, can quickly become unusable. It is recommended to strengthen wear-prone areas with PVC corners. Let's look at what you can use to glue a plastic corner and how to do it.
PVC corners give the renovation a finished look
Plastic corners are finishing elements that can protect external corners walls from damage. They also perform decorative role, giving the interior integrity and completeness.
Among the many types of corners, PVC products are considered popular. They are universal. They are finished with:
- door, window, arched openings;
- window sill niches;
- places where the walls meet the ceiling;
- external and internal corners walls;
- gaps between the wall and the surface of the kitchen unit.
PVC panels come in white, colored (with various shades and textures) and double-sided painting. According to the form they are distinguished:
- standard version (equilateral corners for wall corners);
- T-profile;
- L-shaped (arched).
Why do experts advise gluing plastic corners to the wallpaper? Corner profiles made from polyvinyl chloride are different:
- Durability. The products retain their properties for more than 25 years.
- Durability. They have anti-corrosion properties. Resistant to cracking and abrasion. Not affected by humidity and ultraviolet radiation.
- Easy to install. They are easy to cut with a knife or scissors.
- Low price.
- Unpretentiousness in care.
- Light weight.
There are also negative aspects. PVC products lose color over time. If a fire occurs, they melt, releasing toxic substances. They should be protected from damage by sharp objects.
How to glue a plastic corner
To ensure that the work done is not in vain, you need to choose an adhesive that is best suited for plastic corners. IN construction stores
- There is a wide selection of adhesive compositions available. Finishing of corners and slopes is carried out using the following adhesives: liquid nails, you can securely attach a corner made of PVC or polystyrene foam to any surface, in particular to textured wallpaper, wood or concrete. The glue has excellent adhesive properties and sets quickly. If necessary, the composition is selected a certain color. It is better to glue white plates with a colorless compound.
Liquid nails are often used when installing corners
- Polyurethane glue. Durable, elastic, tightly glues PVC and MDF. The instructions say that not every polyurethane-based adhesive is intended for PVC corners. A significant disadvantage is the pungent odor and high cost.
- Silicone sealant. Recommended for fixing profiles to wallpaper, plastic panels, as well as to ceramic tiles in the bathroom, in the kitchen. It is advisable to use acrylic sealant. However, when using silicone glue, over time you can observe a weakening of adhesion, especially in places where the corners are most often touched. Therefore, if you are planning to attach a plate to a tile using silicone, you should choose compounds with high adhesive properties.
- Liquid plastic. The purpose of the composition is to glue exclusively PVC parts. It is good to work with it, for example, when finishing the joints of plastic windows. This type of glue must be used carefully, since a special chemical reagent will be needed to remove the mixture that accidentally gets on the wallpaper.
PVC profiles are self-adhesive. It is necessary to glue the plastic corner onto the wallpaper after taking measurements. After this, the protective tape is removed from the product, and the plastic is pressed against the outer corner.
Tools for work
To fix the plastic you need glue gun. It allows you to accurately apply the composition used. You also need to stock up on:
- hacksaw or metal scissors;
- stationery knife;
- metal square;
- tape measure, pencil;
- masking tape;
- glue mixture.
You can obtain profiles of the desired size and shape using a miter box. However, if this tool is not there, it’s okay.
How to glue a plastic corner
To glue plastic corners to wallpaper or slopes, you should take into account the surface to which the plates will be attached. Corners can be glued to wallpaper in two ways:
- Directly to wallpaper. Important: the wallpaper texture should be shallow, otherwise dust will accumulate in the resulting gaps.
- With cutting out the strip and applying glue to the wall. To do this, you need to place a plastic corner on the installation site, and then cut off the wallpaper on both sides with a knife.
If there are curved slopes, flexible PVC profiles will be useful.
How to cut correctly
Before gluing the corner, the required length is measured. Trimming at an angle of 45 degrees is carried out using a sharp scalpel knife or hacksaw. Blanks are also made using a miter box.
How to glue
If you need to attach plastic corners to the wallpaper, first the area to be treated is freed from finishing material. The width of the cut strips should be slightly less than the width of the profile. Next we work like this:
- on inner side Apply the selected glue to the planks;
- We apply the polyvinyl chloride profile to the surface and press it along its entire length using a napkin or dry rag;
- We secure the plastic with masking tape;
- After the glue has set, remove the tape.
Before gluing the PVC profile to the windows or doorway, it is necessary to examine the surface for any unevenness. If it is not possible to correct the defect, use flexible plastic panels.
When it is necessary to glue the corners between the wall and the bathtub, it is important that the surface of the bathtub edge that is adjacent to the wall is clean. To protect the tiles from possible glue getting on them, you can use masking tape.
First, treat the side of the bathtub and the adjacent section of the wall with an antiseptic and degreaser. The next stage is filling the gaps silicone sealant. The PVC corner is glued after a day or two.
How to glue the inner corner to the ceiling? When fixing products, it is important to avoid the formation of gaps. If adhesive has come out, it should be removed. After installing the PVC profile, finishing putty is used.
When making preliminary markings, you need to be as precise as possible to avoid gaps between the joints. It is better to increase the profile length by 0.5-1 mm. Thanks to their elasticity, the panels will fit perfectly into place.
Before installing the corners on the walls, the panels are cleaned of dirt. If the cutting of the panels turns out to be uneven, do not fill the gaps with silicone. Gradually, the defective areas will become covered with dust and become noticeable.
To attach the arched corner, you will need a hair dryer. If after 2-3 warm-ups it was not possible to bend the profile, further attempts should be stopped. Prolonged heating makes the material hard and brittle.