Suitable for repair and construction work. This building material has a flat surface, so it can be easily created, also with the help of partitions. Knauf partitions made of tongue-and-groove plasterboard have many advantages. The functionality of the partition is mainly aimed at dividing the room.
Knauf prefabricated plasterboard partition systems are used both in apartments and in public places. They differ in types and sizes. With their help, walls and partitions are created.
Assembling the Knauf partition frame The main advantage is the Knauf material. Tongue-and-groove gypsum slabs are created using lithium technology.
Required amount of materials for installing the partition They do not burn and are . Composite boards do not contain toxic impurities harmful to humans and animals. Such slabs are easy to install and can be processed.
Knauf plasterboard partitions are fully equipped, which is important in the installation of the partition and its further use.
Types of partitions and installation features
The Knauf company produces partitions that are excellent in size and type. For convenience, they are divided into models.
Device diagram and design of the Knauf partition According to the design, Knauf partitions are divided into the number of layers of plasterboard (GLP):
- One layer of drywall.
- Two layers.
- Three layers of plasterboard.
- One layer on one frame.
- Combined drywall on one side and two-layer on the other side.
- Three-layer cladding of moisture-resistant plasterboard and metal sheets.
The design of the partitions has channels for communications, as well as dedicated spaces for ventilation. 
According to the Knauf frame, there are partitions: single-frame, designed for places where there is no need and there will not be a strong weighting of the structure. Two-frame structures are durable and can be used as a basis for creating furniture.
Partition C112
The Knauf S112 system is a composition of materials that create a partition with two-layer cladding and one metal frame.
Partition features:
Considering all the features of Knauf, we can say with confidence that its service life is long.
Names of Knauf partition elements Installation of partition C112
The partition installation technology is carried out in compliance with step-by-step instructions. Installation work should begin when all electrical work has been completed. After completion of repair work on the flooring, as well as completion of water procedures in the required room.
Installation of the Knauf partition is carried out as follows:
- Using a laser and upholstery cord, markings are applied to the clean surface of the floor, walls and ceiling.
- The lines mark the location of the rack profiles, as well as the doorway.
- They are attached first. Metal cutting scissors are used to cut the profile to the required length.
- To improve sound insulation on the NP, it is necessary to glue a sealing tape according to the width of the profile.
- Using 35 mm dowels, the profile is attached to the floor. The fastening step is no more than 1 meter.
- Similarly, the NP is mounted on the ceiling.
- After this, you should measure the length of the rack profile from the ceiling to the floor.
Example of fastening rack profiles - The length should be 1 cm less than the height of the room.
- Sealing tape is glued to the rack profiles that are attached to the wall.
- If the wall is made of Knauf plasterboard, then profiles. If the brick or block is made of cellular concrete, then dowels 35 mm long are used. The spacing of fastening dowels or screws is no more than 1 meter.
Scheme for fastening Knauf plasterboard sheets - For doors weighing 35 kg, it is necessary to mount a double rack profile, by attaching one profile to another.
Diagram of a double rack profile device - Door racks are mounted in guide profiles and secured with self-tapping screws 9 mm long.
- A horizontal lintel for the door is cut from the guide profile. It is installed between the door post profiles, at the top of the door height and secured with 9 mm self-tapping screws.
- From the resulting door frame to the ceiling, you should install a cut-out rack profile in the amount of two pieces. These racks are fastened using the perforation method with a bend.
Rack connection diagram 
- From floor to ceiling, rack profiles are installed every 60 cm, fixation is carried out using the cutting method.
Drawing with dimensions for mounting rack profiles - The backs of the profiles should be turned to one side, and the holes for the cables should be at the 1st level.
Plasterboard covering of partition C112
After the metal frame is mounted, it begins. The sheet should be fixed at a distance of 1 cm from the floor. If necessary, use a construction knife. The cardboard is cut along the intended line and the plaster is broken.
On the other side, the cardboard should be cut along the resulting fold line. The cut part of the gypsum board is processed and a 22 degree chamfer is created. And also for cutting the sheet, cutters are used - small (the width of the cut sheet is 12 cm), a large cutter is 63 cm.
Installation of drywall is carried out using a special device. The sheets are pressed against the frame and... They should be at the same distance from each other - 7.5 cm, and also from the edge at a distance of no more than 15 cm. The head of the screw should be recessed into the gypsum board by 1 mm.
In the place where 2 sheets are connected vertically, a jumper from the profile should be installed. Adjacent horizontal joints are shifted by 40 cm.
After installing the plasterboard sheets, electricity and other cables should be pulled through the holes in the metal studs.
Example of wiring under drywall The next step is to lay Knauf Insulation material on the open side of the partition. And covering the partition with plasterboard sheets. But, the drywall joints on one side should not coincide with the joints on the other side. In this way, the strength of the structure is created. 
After puttying, you should proceed to. In this case, the joints of the first layer of plasterboard should not coincide with the second level of plasterboard covering of the partition.
Using special equipment, it is necessary to cut holes at the designated points for electrical boxes for the switch and. 
Drilling holes for sockets The joints of the second layer of drywall must be sealed using Knauf reinforcing tape. After the putty has dried, the joints need to be grouted to remove excess pieces.
After grouting, the entire surface should be primed with Knauf Tiefengrund.
Detailed process for installing holes in drywall for sockets 
If the partition is to be painted, then before painting the entire surface should be puttied with Knauf Multi-Finish. When the surface is dry, it should be rubbed and coated with a primer.
Watch the video for the process of installing the Knauf partition.
Hello, dear readers! Not long ago, the following situation happened: a friend finally got into the hands of an album of standard drawings from a materials manufacturer. For the first time, a person learned that using Knauf technology, drywall is sometimes mounted on profiles in two rows! He came to me for an explanation, and I said that the manufacturer offers different options so that builders can reduce the likelihood of cracks. If you do not set yourself the goal of saving on important nuances, but want to install a durable structure, study all the intricacies. I’ll help you figure them out now, since drywall is my favorite material.
What structures can be made from plasterboard using Knauf technology
Technology Installation of Knauf gypsum boards differs slightly depending on the type of partition used. We will talk about the characteristic features, if any, separately, for each specific structure. The following basic Knauf plasterboard systems are distinguished.
C 111: technology with Knauf
This is the simplest design, consisting of a supporting frame made of a steel profile, sheathed on both sides with sheets of plasterboard, filled with insulating material. The thickness of such a gypsum board partition is minimal and equal to the sum of the width of the supporting profile and the thickness of the sheets of material. Such a design is, rather, decorative in nature, since it is not able to withstand heavy loads and can easily be destroyed by physical contact. GKL partitions according to the Knauf s111 system are used in places where there is no need for a high level of heat and noise insulation and the structure itself is needed, rather, for the visual division of space.
C 112: double-layer plasterboard technology
GKL partitions using the Knauf s112 system are made in a similar way, their main difference is that the drywall is sewn in two layers on each side. This increases the strength of the finished structure, improving its performance characteristics. More resistant to mechanical stress, they, however, cannot replace full-fledged walls.
C 113: technology with three-layer Knauf plasterboard sheathing
This variety differs from the first two in that it is sheathed with three sheets of drywall on each side. This approach is usually used where it is necessary to combine different types of gypsum boards.
Types of plasterboard Knauf:
- ordinary;
- moisture resistant (wall color green);
- fire-resistant (wall color red);
- combined GKLVO.
Depending on the application, they can be used in various combinations. For example, the walls of corridors intended for fire evacuation are sheathed with fire-resistant sheets.
C 115: reliable technology from Knauf
Plasterboard partitions "Knauf", made according to this system, are a double metal frame, sheathed with a double layer of plasterboard sheets. This approach allows you to increase the thickness of the final wall, as well as improve its insulating characteristics due to the use of a double layer of insulation inside. The double metal frame, in turn, makes such a wall quite strong. Knauf floors made using this technology can already be considered a full-fledged wall.
When using this technology, it is necessary to lay heat-insulating tape between the joints of the metal frames.
An important point is the laying of heat-insulating tape at the junction of two metal frames; this is necessary so that the wall does not freeze, condensation does not form in it, and it maintains high performance properties.
C 116: multi-layer plasterboard technology
Unlike system 115, transverse gypsum board spacers are used here to increase the thickness of the wall and leave space inside for wiring all the necessary pipes and communications. In fact, inside the walls they form an artificial cavity for technical use.
C 118: installation technologies
This type of partition is made using technology 113 with the only difference that between the layers of plasterboard the wall is sheathed with galvanized steel half a millimeter thick. This design is designed to retain its consumer properties even if you try to break it. Of course, such a wall will not withstand an angle grinder, but it will take time to demolish it, so the use of structure 118 for protection against penetration is fully justified.
C 121 and 122: how to build a partition with Knauf
GKL "Knauf" partitions made using this technology are practically the same as systems 111 and 112, with the only difference being that here the frame is made of wood.
Technology for working with Knauf plasterboard: basic principles
Important to remember. Separately, it is worth talking about the installation of all the specified gypsum board partitions using the Knauf Tigi technology; this method involves the arrangement of sheets of different layers overlapping each other. Or take a running start, as they also say. That is, the joints of sheets at different levels should not intersect. The instructions for constructing partitions using this technology indicate that the joints of slabs of different levels should be at a distance of at least half a meter from each other. This applies to both vertical and horizontal joints. By following this rule, you will greatly increase the strength of the finished structure.
When choosing Knauf, you get not individual elements, but ready-made engineering systems. The use of Knauf plasterboard systems implies a complete closed cycle of work, in which all materials and components are used only from this manufacturer. This approach is useful in many ways. The fact is that Knauf not only produces various elements, this company supplies ready-made engineering systems in which everything is thought out.
Each small part individually, in its place, forms the overall monolithic result. Here is what is needed to work using this technology:
- Profiles. At Knauf, the supporting and guide profiles are made in such a way that when installing one to the other, no distortions, distortions or other anomalies occur. The finished frame, built from the specified material, is always smooth, strong and reliable.
- Filler or insulator. It is recommended to use only mineral wool from the specified manufacturer to fill the space between the walls. It does not spread fire, does not rot, and does not support organic life forms, which means that mice will not grow in such walls. In addition, such wool is made to fit the width of the inter-wall space and does not require additional processing.
- The plasterboard itself from this manufacturer, which meets all European quality standards, in combination with the other elements of this construction kit, is capable of providing many years of high-quality service.
- Rough and finishing compounds for grouting and sealing, created taking into account the composition of cardboard and gypsum filler of this particular brand, successfully complement plasterboard from this manufacturer, exhibiting excellent adhesion properties to its surface. Thus, the finished wall with rough finishing already looks complete.
- Insulating tape of the required width for a specific profile, as well as all hardware for work, should also be selected from the products of the specified brand. After all, the quality of these elements is checked and certified, and also tested by many years of use. Do not doubt the quality of the finished wall by saving on fasteners. After all, it is on it that all these components are held.
Conclusion
As can be understood from the above, the Knauf technology for walls and partitions made of plasterboard is a reliable and calculated engineering system, which is purchased in parts, but, when installed on site, represents a direct integration of German quality into the Russian interior.
Knauf: technology for installing walls, partitions, plasterboard ceilings
Drywall is widely used in the construction of internal structures: additional walls, decorative partitions and openings, arches and niches, ceilings. In each case, you will need to install reliable support so that the walls or ceilings are strong and last for decades.
One of the popular installation systems is partitions Knauf. This is a series of plasterboard structures based on a metal profile frame. At the time of manufacture, all the nuances of the technology are observed, so these complete systems do not harm the overall level of reliability or integrity of the wall.
Drywall for work using Knauf technology Specially designed manual series have been developed. Using them and an album of working drawings, you will effortlessly understand all the intricacies of the system. Each series examines in detail the nuances of the technology for working with one or another component. For example, a series of partitions C111 or C112.
Ceiling installation technology using the Tigi Knauf system
When installing ceilings of this type, you should adhere to certain rules that will allow you to complete the work without flaws and errors. These requirements take a lot from the standard ones, but there are also some peculiarities.
Features of using Tigi Knauf systems when installing ceilings:
- It is not necessary to prepare the surface for installation.
- The Tigi Knauf system is mounted on a finished ceiling. Drywall is pre-installed on it.
- Tigs are installed on a frame made of wood, metal or a base already covered with materials.
- Cut the material carefully. using tools appropriate for these purposes. A chamfer is created on the outside, which is subsequently puttied.
- The drywall is positioned so that the seams are staggered. The spacing for fastening the seams of the material corresponds to 60 cm. This allows you to avoid cross-shaped joints, which are prohibited when working with the profile.
- Gaps 0.5-0.7 cm wide are left between the pieces of material. This approach to fixation makes it possible to reduce the influence of mechanical load on the sheets, which provides protection against chips and cracks.
- The sheathing is fixed using self-tapping screws. They are located in increments of 200-300 mm. This indicator depends on the total load of the structure. It is allowed to use mechanical, pneumatic, and electric tools.
Product technological map: drywall from Knauf
In order to achieve compliance with the developed technology, a standard technological map is provided, which is used when performing finishing. Complex systems are required to accurately calculate the material of a plasterboard ceiling. The map helps in assembling the structure.
More precisely, a standard technological map is intended for the development of projects carried out using gypsum boards. It is used for the correct construction of structures.
The map is considered a kind of manual for craftsmen whose specialization is the construction of suspended ceiling structures made of plasterboard.
The Knauf map takes into account the characteristics of materials and indicates their consumption in accordance with the dimensions of the structures being built. In addition, the card specifies the installation procedure.
Knauf technologies when working with drywall
The Knauf company firmly holds its position as a leader in the modern building materials market. True German quality allows you to install durable and reliable plasterboard structures - ceilings, walls, partitions and arches. The assortment includes Knauf and GKL, and all the “consumables”: profiles, hangers, putties, primers. It is about profiles that will be discussed in the next material.
What is a profile for drywall from Knauf? This is an element made of high-quality galvanized steel intended for fastening gypsum boards in various types of structures. Their classification and technical characteristics are given in Table 1.
Table 1. Types of Knauf metal profiles
| Name | Features of application | Section, mm | Length, mm |
Guide (PN)  |
Is a guide for rack profiles, necessary for creating jumpers | 50×40 65×40 75×40 100×40 | 3000 |
| Rack-mount (PS) | Used for the construction of vertical frame posts, connected to the corresponding Knauf guide profile for fastening drywall | 50×50 65×50 75×50 100×50 | 3000 |
| Ceiling (PP) | Has a C-shape, used to form a frame | 60×27 | 3000 |
| Ceiling guide (PN) | Serves as a guide for the PP; when installing ceilings, it is attached along the perimeter of the walls. | 28×27 | 3000 |
| Corner defensive | Protects corners from external damage | 25x25x0.4 31x31x0.4 31x31x0.4 | 3000 |
| Arched (PA) | Necessary for the formation of arches, domes and other curved structures | bending radius 500,1000 | 3000 |
| Corner plasterer | Installed at the ends of walls for protection during operation | 35x35 | 3000 |
| Mayachkovy (PM) | It is the basis for the surface plastering process. | 22×6 23×10 62×6.6 | 3000 |
| Enhanced (UA) | Used as a rack element when forming doorways | 50x40 75x40 100x40 | 3000 |
What is needed to install Knauf profiles: technologies
From the table above it can be seen that there are many options for manufacturing metal profiles, depending on the specific application as frame elements. Each type has its own installation features, so you can consider the whole process using the example of installing a suspended ceiling.
To begin with, you should familiarize yourself with a number of rules:
- Carry out all repair work in a dry room;
- choose ceiling profiles for plasterboard from a well-known manufacturer (Knauf, for example);
- accurate marking is mandatory, as it will allow you to avoid gross mistakes and save material;
- Before installing the profile, you must additionally check the markings using a level;
- Before covering, you need to make sure that the entire frame is strong, as this will avoid “distortions”.
Once the design of the plasterboard ceiling has been chosen and the budget has been calculated, you can go to the construction supermarket. It is advisable to purchase there:
- laser level;
- measuring tool;
- drill or hammer drill;
- metal scissors;
- two types of profiles (guides and ceiling);
- pendants;
- dowels (anchors).
In addition, to create smooth lines, you need an auxiliary tool for bending drywall and metal profiles. For example, an awl, a needle roller and special equipment for cutting metal. An arched profile will be the best solution for curly structures, since it is easier to bend than other types.
Ceiling installation technology when working with Knauf plasterboard
There are several stages of installing a frame made from Knauf plasterboard profiles. First you need to determine the angle that is lower than all the others in level. To do this, you will need a simple measuring tool - a tape measure.
They retreat at least 5 cm from the selected point and place a mark along the perimeter of the room. All milestones are connected in a line using a painting cord. Using the applied markings, you can now attach the guides, then the hangers, the ends of which should be bent. After this, ceiling profiles are mounted using self-tapping screws and lintels are installed. That's it, the frame is ready. You can begin covering the gypsum boards and finishing work.
Installation of Knauf profiles will not be a problem for careful craftsmen, but the problem of choosing a manufacturer remains relevant. The fact is that building elements from well-known companies cost a lot of money, so the average person is always looking for an alternative. Finding it is not so easy, but it is quite possible to take correct measurements and installation. This approach will help save up to 10% of money. Are there any other ways to make reasonable savings without losing quality?
Knauf: installation technologies
When using one type of Knauf product, it is rational to purchase related materials from the same brand. One of the manufacturer's concepts is material compatibility. That is, for example, Knauf drywall and fasteners of the same brand are ideal for each other.
Knauf: manufacturer of drywall and more
It is believed that about 70% of drywall sold in Russia is produced under this brand. Knauf has been a confident leader in its market for many years, and the company’s factories are widely represented in Russian territory.
Knauf is an international company based on the classic principles of a family business. The manufacturer adheres to these rather rare principles today, which certainly affects the quality of the product. This company is rightfully considered an authority in the world of corporations producing building materials.
There is no doubt that factories located in the CIS operate using exactly the same technology as in the West. The equipment at the factories is the most modern and advanced, and the quality standards are the same both for, for example, a plant located in Germany and for a Russian plant.
Knauf plasterboard production technology
Construction sheet-gypsum boards of type A - this is the correct name for the gypsum boards familiar to everyone. This is a high-quality construction and finishing material that is used for cladding walls, constructing partitions, ceiling structures and products whose task is sound absorption and sound insulation.
Each Knauf sheet necessarily contains the following information::
- Letter marking of sheet type - GSP - A;
- The type of longitudinal edges of the sheet is indicated;
- Indicates standard;
- Numbers that display the width, length and thickness of the sheet (dimensions are indicated in millimeters).
If we talk about technical characteristics, then Knauf plasterboard is a rectangular building element consisting of two layers of special cardboard with a gypsum layer and the addition of reinforcing inclusions. The side edges of the strip are folded with the edges of cardboard.
The core of such a sheet is gypsum binder under the designation G4 (GOST 125-79).
Knauf plasterboard sheets have:
- A semicircular thinned edge, which is considered a good technological solution;
- Cladding cardboard, which adheres perfectly to the core, is “organized” by adhesive additives;
- Cardboard is used not only as a building frame, but also as a base for applying any finishing.
By the way, the technical characteristics of cardboard meet all the requirements for using this material in residential premises.
Knauf drywall size
Knauf sheets have certain dimensions, which are usually counted in millimeters.
GKL sizes:
- Length has a size ranging from 2000 mm to 4000 mm;
- Thickness gypsum sheet - size 6 and a half mm, 8 mm, 9.5 mm, as well as 12.5 mm, 14 mm, 16 mm, 18 mm, 20 mm, 24 mm;
- Width sheet - size 600-1200 mm.
A standard plasterboard sheet has dimensions of 2500 x 1200 x 12.5. A sheet with an area of 3 square meters weighs 29 kg. Drywall is packaged in bags, each containing 50 slabs. One package is definitely enough to cover 150 square meters.
Some craftsmen change these sizes to suit themselves, but there is plenty to choose from, so this need may not arise. Such parametric characteristics are very convenient for the buyer to choose.
Acoustics
This is perforated plasterboard. The name speaks for itself - perforated boards are used for sound insulation and noise absorption. This is a sheet whose edges are cut off and a sound-absorbing layer is glued to the back side.
At the same time, the sound absorption parameters of the slabs may be different (again, there are plenty to choose from). And the design of plasterboard boards varies; they can be white or black.
Drywall Tigi Knauf
Complete Knauf tig systems are another great discovery and invention of this construction brand. The essence of the system is that repairs occur without so-called wet processes. That is, no liquid masonry or use of plaster. For many craftsmen, this is a strong argument in favor of purchasing products from this particular manufacturer.
The kit includes:
- The cladding boards themselves;
- Material for creating a metal frame;
- Tools for work;
- Assistive devices;
- Detailed recommendations for carrying out work.
That is, the list of items that are included in the complete system will be impressive. There are the plates themselves, and profiles, and extensions, and connectors. Included in the complete system are hangers, screws, anchor elements, and dowels. It is noteworthy that you also won’t have to spend money on reinforcing tape, putty and primer - everything is included in the kit.
One of the most technologically advanced and economical solutions for construction or apartment renovation is the installation of gypsum board sheets. With their help, you can easily correct all wall defects, achieving a perfectly flat surface. The effectiveness of gypsum boards in the manufacture of decorative elements, arches or boxes has been proven by numerous design implementations. Among the total number of manufacturers of plasterboard material, the German company stands out favorably Knauf, whose products meet all international standards. The components used in production do not contain any toxic elements and do not have a harmful effect on human health.
General information
Plasterboard sheet is a three-layer structure consisting of two outer layers made of cardboard and internal from gypsum mixture. Depending on its composition Knauf plasterboard and its price are divided into:
- ordinary(GKL);
- moisture resistant(GKLV);
- fire resistant(GKLO);
- moisture resistant with increased resistance to open fire(GKLVO).
The types of sheets can be easily determined by their external characteristics: moisture resistant varieties have green cardboard, A ordinary – grey.
The technological composition of the first type differs from others in the presence of antifungal and hydrophobic additives, as well as special cardboard.
By purpose GCRs are divided into three types:
- arched– thickness 6.5 mm;
- ceiling– thickness 8 mm;
- wall– thickness from 10 mm.
In addition, sheets may have various types of longitudinal edge, which Knauf technology for installing drywall used for subsequent puttying of joints.
The dimensions of the rectangular material range from 2,000 to 4,000 mm in length and 600 or 1,200 mm in width.
Preparing for installation of gypsum boards
The preparatory stage includes assessing the working surface for installation and selection of the required tool. The company’s specialists advise preparing:
- a utility knife, a serger or a round cutter;
- , ironer and sander;
- mixing nozzle and solution container;
- building level, marking cord and tape measure;
- screwdriver, square;
- metal scissors;
- Knauf Fugenfuller putty;
- screws, hangers;
- galvanized profile or timber.
The surface is inspected in order to determine the material of the walls and their operating conditions. After this, a specific choice of gypsum boards and consumables is made.
Highlights of Knauf drywall installation technology
Depending on the type of structure, as well as its purpose, plasterboard sheets can be attached both on glue and on a metal or wooden frame. It must be said right away that wood is not the best choice, especially in areas with high humidity.
The use of glue for fastening is permissible for wall unevenness that does not exceed 4 mm. In other cases, it is recommended to use a galvanized profile.
Option for installing gypsum board using glue
For the middle room you need to prepare about 30 kg dry adhesive mixture Knauf Perlfix. It will provide reliable fastening without unnecessary structures, medium price of mixture for plasterboard Knauf – 285 rub. per package 30 kg. Fastening method sheets is as follows:
- pour the mixture into a container with water and stir;
- cut sheets to size;
- apply the finished glue to the back side of the sheet with marks in increments of 350 mm;
- Press the sheet against the wall and level it.
Important! The mixture begins to harden after 10 minutes. During this period of time, the slabs should be leveled using a rubber hammer and a beam.
Installing gypsum boards on a metal frame
This plasterboard installation technology from the Knauf company allows for high-quality insulation and sound insulation of walls. After taking measurements, the process continues the points:
- cut the starting UD profile to size;
- attach the UD profile to the ceiling and floor with dowels at intervals of at least 1 m;
- install direct hangers for attaching the CD profile to the wall, not forgetting to place soundproofing tape; step of at least 1.5 m;
- install the CD profile with a pitch of 600 mm and fix it with screws with direct hangers and the starting profile;
- install the sheet insulation and secure it to the frame with self-tapping screws at 250 mm intervals.
Important! To improve sound insulation performance, it is recommended to attach a special self-adhesive tape to the UD profile. The heads of the screws must be recessed into the mass of the slab; here it is advisable to use a special bit for a screwdriver with a limiter.
Average price for Knauf plasterboard sheets on the construction market
The cost of gypsum plasterboard is primarily influenced by its type and parameters. For example, average prices for various types of material:
- ceiling 1200x2500x9.5 mm - 250 rub./sheet;
- wall 1200x2500x12.5 mm – 290 rub./sheet;
- arched 1200x2500x6 mm – 570 rub./sheet;
- GKLV 1200x2500x12.5 mm – 350 rub./sheet;
- GKLO 1200x2500x12.5 mm – 400 rub./sheet.
When purchasing, you should think in advance and calculate the total amount of material, profile elements and fasteners. This will make it possible to organize a wholesale purchase that will make price of Knauf plasterboard sheets somewhat lower.
conclusions
- The method of using plasterboard boards in construction has a significant advantage - here there are no so-called “wet” processes, which are associated with the preparation and application of a significant amount of plaster.
- The installation technology is within the capabilities of any novice builder and has no special secrets; purchasing a set of tools does not require significant financial investments.
- Thus, for little money and with minimal labor costs we get smooth and aesthetic walls, plus the opportunity to implement the most daring architectural delights.
Partitions made of plasterboard sheets (GKL)
Sets of materials necessary for the construction of partitions The consumption of materials is given per 1 sq. m of partition (based on a partition measuring 2.75 m x 4 m = 11 sq.m without openings and cutting losses).
Notes: 1. Values in parentheses are given for the case when the height of the partition exceeds the length . plasterboard sheet 2. *Depending on the type of sheet, packaging, etc.
Frame installation
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
