Gas boiler Proterm Bear 30 tlo. Assortment of Proterm boilers of the KLOM series. Advantages and equipment of Medved boilers

Name	Article	Power, kW Natural gas Propane	Removal of combustion products	Chimney diameter, mm	Weight, kg	Requirement lyable power, W	Price, rub.
Protherm 20 KLOM	10005724	12 / 17 11 / 16	down the chimney	130	90	2
Protherm Bear 20 PLO	20PLOR15	12 / 17 11 / 16	down the chimney	130	90	2
Protherm Bear 20 KLZ	10005748	12 / 17 11 / 16	down the chimney	130	145	130
Protherm Bear 30 KLOM	10005725	18 / 26 17 / 24,5	down the chimney	130	110	2
Protherm Bear 30 PLO	30PLOR15	18 / 26 17 / 24,5	down the chimney	130	110	2
Protherm Bear 30 KLZ	10005749	18 / 26 17 / 24,5	down the chimney	130	160	130
Protherm Bear 40 KLOM	10005726	24,5 / 35 23 / 33	down the chimney	150	130	2
Protherm Bear 40 PLO	40PLOR15	24,5 / 35 23 / 33	down the chimney	150	130	2
Protherm Bear 40 KLZ	10005750	24,5 / 35 23 / 33	down the chimney	150	185	130
Protherm Bear 50 KLZ	10005751	31,5 / 44 28 / 41,2	down the chimney	180	205	130
Protherm Bear 50 KLOM	10005727	31 / 44,5 29 / 42	down the chimney	180	150	2
Protherm Bear 50 PLO	50PLOR15	31 / 44,5 29 / 42	down the chimney	180	150	2
Protherm Bear 60 PLO	10003788	49,5 48	down the chimney	180	170	2
Protherm Bear 20 TLO*	20TLOR15	18 19,2	down the chimney	130	90	0
Protherm Bear 30 TLO*	30TLOR15	27 26,7	down the chimney	130	110	0
Protherm Bear 40 TLO*	40TLOR15	25 37,5	down the chimney	150	136	0
Protherm Bear 50 TLO*	50TLOR15	44,5 47	down the chimney	180	164	0

* - boilers of the Bear TLO series are non-volatile.

Advantages and equipment of Medved boilers

• Easy to control
• Easy DHW heating
• Maximum level of security
• Minimization of heat losses
• Does not require special care
• Chimney draft control system
• Function "Winter - Summer"
• With nozzle and fan "PROTHERM" - "semi-turbo" - no chimney required

  KLZ boilers also

• Built-in microprocessor
• Smooth control of boiler power
• Exhaust pump run-down
• DHW pump run-on
• Anti-cyclic limitation in heating mode
• Anti-frost protection of the boiler
• Anti-frost protection of the boiler
• Protecting the boiler from corrosion using a magnesium anode
• Pump jam protection
• Protection against condensation on a cast iron block
• Display of water temperature in the heating system, DHW temperature and basic diagnostic data

Characteristics

Type	20 KLOM, PLO	30 KLOM, PLO	40 KLOM, PLO	50 KLOM, PLO	60 KLOM, PLO
Power, kW - Stage I/II - natural gas - propane	12 / 17 11 / 16	18 / 26 17 / 24,5	24,5 / 35 23 / 33	31 / 44,5 29 / 42	49,5 48
Regulation	2-speed				1-speed
Fuel	natural gas/propane
	90 - 92 / 89 - 91
Ignition	KLOM – electric, PLO – unquenchable flame
Supply voltage/frequency	230 / 50
Power consumption, W	20
IP protection class	40
Max. heating agent pressure, kPa	400
	90
	2
	down the chimney
Chimney diameter, mm	130	130	150	180	180
Using the Fan Tip	PT 20	PT 30	PT 40	PT 50
Weight without water, kg	90	110	130	150	170
Boilers connected to the B100MS boiler
Min/Max DHW pressure, kPa	100/600
Range DHW temperatures, °C	40 - 60
Consumption of consumed hot water, l/min	16,5	19	19,5	20	20,5
Initial heating time of water in the boiler (from 15°C to 60°C), min	20	15	14	13	12
Boiler water heating time (from 30°C to 60°C), min	13	10	9	9	8
Nominal volume of boiler B100MS, l	95
Boiler weight without water, kg	46

Type	20 KLZ	30 KLZ	40 KLZ	50 KLZ
Power, kW - natural gas - propane	12 / 17 11 / 16	18 / 26 17 / 24,5	24,5 / 35 23 / 33	31,5 / 44 28 / 41,2
Regulation	smooth
Fuel	natural gas/propane
Efficiency – natural gas / propane, %	90 - 92 / 89 - 91
Ignition	electric
Supply voltage/frequency	230 / 50
Power consumption, W	130
IP protection class	40
Max. heating agent pressure, kPa	300
Max. operating temperature RH, °C	85
Extension tank volume, l	10
Min/Max DHW pressure, kPa	600 / 100
DHW temperature range, °C	40 - 70
DHW consumption (according to EN 625 standard), l/min	12,4	14,0	15,3	21
Min. required chimney draft, Pa	2
Removal of combustion products (method)	down the chimney
Chimney diameter, mm	130	130	150	180
Weight without water, kg	145	160	185	205

Type	20 TLO	30 TLO	40 TLO	50 TLO
Power, kW - natural gas - propane	18 19,2	27 26,7	35 37,5	44,5 47
Regulation	1-speed
Fuel	natural gas/propane
Efficiency – natural gas / propane, %	90 / 89
Ignition	unquenchable flame
Gas connections	G 3/4"
Max. heating agent pressure, kPa	400
Max. operating temperature, °C	85
Min. required chimney draft, Pa	2
Removal of combustion products (method)	down the chimney
Chimney diameter, mm	130	130	150	180
Weight without water, kg	92	116	140	168

OH – heating water

DHW – hot water supply

Dimensions

Room regulators

By using a suitable room controller, more high level comfort with more economical operation.

Sensor outside temperature

Inalienable component boiler control system using an equithermal regulator.

Semi-turbo - chimney replacement

In cases where it is not possible to ensure the exhaust of combustion products into the chimney, it is possible to remove combustion products directly through the wall by installing an additional nozzle with a "PROTHERM PT" - "semi-turbo" fan.

Connection kit "boiler - boiler"

Facilitates the work when connecting the boiler to the boiler and ensures their interaction.

Medvel - a series of floor-standing cast iron boilers

Cast iron boilers of the Bear series are the most suitable solution to modernize your existing heating system. They can also be connected to older systems with an open expansion tank, or they can complement a heating system that uses a solid fuel boiler as a heat source.
Thanks to their solid construction, they guarantee a long service life and easy-to-maintain, problem-free operation.

The MEDVED TLO boiler is designed on the basis of low-temperature cast iron boilers MEDVED PLO. It is designed for heating objects with a gravitational heating system independent of electricity.

Smart design – high efficiency

• The cast iron boiler body consists of individual elements, which are specially designed so that the heat during fuel combustion is transferred to the heating water as much as possible.
• The burner is equipped with two to five stainless steel tubes, which, thanks to their thoughtful design, help the boiler achieve excellent parameters. In combination with specially designed nozzles, they ensure uniform mixing of gas with air, which contributes to high boiler efficiency and very low content. harmful substances in combustion products.
• The fuel combustion process complies with the most stringent European standards.

Control Panel

The practical arrangement of elements on the control panel increases the ease of maintenance of the boiler.

Safety - important parameter boilers

The well-thought-out draft interrupter design optimizes fuel combustion conditions and maintains proper draft in the chimney. In case of non-standard exhaust conditions (chimney blockage, unfavorable climatic conditions, atmospheric influence) the draft control system in the chimney will ensure that the boiler is turned off, preventing the occurrence of danger for people living in the building and for the environment.

KLZ series boilers are equipped with an excellent control system used for mounted boilers, including a built-in microprocessor, smooth power modulation or equithermal control. This series can be recommended for both new houses and reconstructed properties.

Boilers of the Bear TLO series:

• The boiler is equipped with an SKKT chimney draft control system, which, if there is insufficient draft in the chimney (clogging, extreme climatic conditions, atmospheric influences), immediately shuts down the boiler from operation. This prevents any danger to humans or the environment.
• The gas is ignited by a so-called “eternal flame”, which heats a thermocouple placed on the ignition burner. When the thermocouple heats up, a voltage of 820 mV is generated, which is used to control the main coil of the gas valve. If the flame goes out unexpectedly, the gas valve closes immediately, which ensures absolute safety of operation.

Convenient control of Protherm Bear TLO boilers

The rational arrangement of elements on the control panel increases the safety of using the boiler. The main switch, together with elements designed to regulate the parameters of the boiler and control its operation, are located under a specially hinged lid.

Fast heating of DHW in Protherm boilers Bear TLO

• If it is necessary to obtain a large amount of hot water, an additional boiler can be connected to the Bear TLO boiler.
• A special Protherm connection kit is designed for quick connection of the boiler to the boiler. The connection kit is universal for all Bear TLO boilers of any size with a "B 100MS" boiler located to the right or left of the boiler.
• This kit contains the electronic board and everything necessary elements including connecting hoses. The kit is supplied separately and is not included in the standard boiler package.

Connection of a room regulator in Protherm Bear TLO boilers

• To control the boiler, it is convenient to use a room regulator with special gold-plated contacts.
• When connecting the regulator, it is important to pay attention to the diameter of the connecting cable and its maximum length (see table). The regulator is connected to the terminal block, which is located in the boiler.

Built-in microprocessor

• not only controls the entire operation of the boiler, but also provides equithermal temperature control and automatic diagnostics. Fault messages are shown on the display (for example, gas supply interruption, etc.).
• it provides smooth regulation of the boiler power based on constant comparison of the actually achieved values ​​with the values ​​required (set) by the user. This control system is proportional, i.e. at bigger difference compared values, the boiler operates with greater power and vice versa.

Control Panel

Under an easily hinged plastic cover there is a display that displays the temperature of the heating water or DHW and automatic diagnostic message codes. Setting up all boiler parameters is very simple - using two buttons.

Boiler equipment

Two pumps (for the heating circuit and for DHW), safety valves and 10 liter expansion tank for the heating circuit allow you to easily and quickly connect the boiler to the heating system without additional investment.

Sufficient amount of hot water

The built-in 90-liter boiler provides a sufficient amount of hot water. Its heating has an advantage over heating and is always carried out with required power regardless of installed capacity boiler An efficient heat exchanger ensures rapid heating of water in the boiler. The boiler also has a connection for circulating warm water.

Boiler control system

The boiler is equipped with an equithermal regulator and a timer. The timer built into the control panel allows the user to pre-select certain time intervals during the day when thermal comfort is required, and time intervals with a lower temperature (at night or when the family leaves for work, etc.).

Equithermal regulation

• This is a boiler control method in which the heating water temperature is regulated depending on the outside air temperature. An outside temperature sensor constantly monitors changes in the weather, and the controller, in accordance with preset dependencies, regulates the water temperature in the heating system (and thus the air temperature in the building) so that constant thermal comfort is ensured at all times. By supplementing this system with a room regulator or thermostatic radiator valves, you can create a reliable, economical and pleasant way to heat your home and increase thermal comfort.
• To simplify the controller's maintenance, several heating schedules are pre-entered into the controller's memory, according to which each value of the outside temperature corresponds to a specific heating water temperature.
• The control unit has a built-in timer, with which the user sets the time for changing the boiler’s daytime operating mode to night operation with a reduced temperature.
• The equithermal regulator is integral part boiler control system, so there is no need for additional investment in installing a special regulator.

Benefits of an equithermal regulator

• Adjusting the heating water temperature to the instantaneous value of the outside air temperature
• This gives a particular advantage during the transition period of the year, when this method of regulation is more flexible compared to using a classic room regulator
• In case of sudden changes in weather, a boiler with an equithermal regulator reacts faster than a boiler controlled only by a room thermostat.

Clear control panel

• The rational arrangement of elements on the control panel increases the safety of using the boiler. The main switch, together with elements intended for visual control of operation, is located under an easily hinged cover.
• Elements intended to regulate boiler parameters are protected by the front casing of the boiler. This prevents accidental or unwarranted manipulation of them.
• To increase thermal comfort, the boiler can be controlled by a programmable room controller.

For your satisfaction

• Using the switch on the boiler control panel, you can easily select the boiler operating mode. IN summer period The boiler only heats the water in the boiler, and in winter it also provides heating. During the transition period, the boiler can be switched to reduced power.
• Additionally, the boiler can be equipped with a pump thermostat, which includes circulation pump(not included in the boiler delivery set) only after sufficient heating of the heating water in the boiler body. A significant reduction in water heating time results in significant fuel savings and protection of the cast iron block from condensation.

Two-stage regulation – fuel saving

• KLOM and PLO boilers are equipped with tried and tested two-stage gas valves.
• During the main heating season the boiler is running on full power, and during the transition period, when the outside temperature is above 0°C, the boiler can be switched to reduced power using a switch on the control panel.

Easy DHW heating

• The Bear boiler can work with a DHW heater in the boiler.
• To connect and ensure error-free communication between the boiler and the boiler, PROTHERM offers a suitable connection kit.
• The connection kit is universal for all Bear boilers of any size with a "B 100MS" boiler located to the right or left of the boiler. This kit contains all the necessary elements, including connecting hoses.

You can pick up the purchased product yourself or use the delivery service in Moscow and the Moscow region. By placing an order today, you will receive it at your disposal tomorrow. If necessary, you can use the prompt delivery service and receive your products today.

Delivery to the entrance (check with the manager about the possibility of lifting to the floor)

Delivery is made daily from 9 to 21 o'clock , including weekends and holidays.

Goods worth up to 6,000 rubles can be picked up by self-pickup.

Pickup points

For orders worth more than 6,000 rubles:

• Within the Moscow Ring Road - from 0 to 500 rubles, (individual delivery cost is indicated in the product card)
• Outside the Moscow Ring Road up to 10 km - 700 rubles,
• Beyond the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
• To the regions, delivery by a transport company (calculated individually).

Delivery cost for

km from MKAD

700 rub.

Unloading of large-sized goods is carried out by the efforts and means of the customer.

The money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and convenience of calculation.

Payment by bank card to the courier upon receipt

Couriers have a portable banking terminal, which allows clients of the Teplovod-Service company to pay for goods with bank plastic cards (check with the manager about the possibility of paying by bank card).

Payment by credit card on the website

To select payment using a bank card, on the “Cart” page, you must select the “Payment by bank card on the site” item.

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:

After clicking on the “ONLINE PAYMENT” button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.

Please prepare your plastic card in advance. Additionally, you need to enter your full name, email, contact phone number, and reservation number to identify the payer. The connection to the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the Verified By Visa or MasterCard Secure Code technology for secure online payments, you may also need to enter a special password to make a payment. You can check the methods and possibility of obtaining passwords for making online payments with the bank that issued the card.

This site supports 256-bit encryption. The confidentiality of the reported personal information is ensured by Sberbank of Russia OJSC. The entered information will not be provided to third parties except in cases provided for by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.

When paying by credit card, no interest is charged.

Payment is a transfer cash from the buyer's current account to the seller's account, we work on common system taxation including VAT. Delivery of goods is carried out after receipt of funds to the account of the company Teplovod-Service LLC. This method is used for calculations by legal entities.

Our details

Limited Liability Company "Teplovod-Service"

OGRN: 1105003006162

Taxpayer Identification Number: 5003088884

Checkpoint: 500301001

BIC: 044525225

Bank: PJSC “Sberbank of Russia”

R/s: 40702810838060011732

S/s: 30101810400000000225

Legal address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoe highway, 21 km., office B-6

Special conditions

For goods with the status "To order" worth up to RUB 100,000. no prepayment required.

For goods with the status "To order" over 100,000 rubles. An advance payment of 30% is required.

• For any item shipped transport company, 100% payment required.

Reviews of the product “Floor-standing boiler Protherm Bear 30 TLO 26 kW”

There are no reviews for this product yet. Your review will be the first!

Leave your review

Rating - 5

Score - 1 Score - 2 Score - 3 Score - 4 Score - 5

Leave feedback

Warranty terms

The manufacturer of PROTHERM brand heating equipment provides a minimum 2-year warranty on its equipment, unless otherwise installed. Warranty obligations are fulfilled by the company - service center or equipment seller.

Please note that the manufacturer's warranty is valid only if installation and commissioning were carried out by a certified employee of a specialized organization. However, having a Protherm certificate does not eliminate the need additional certification personnel of a specialized organization in accordance with those in force in the territory Russian Federation legislative and regulations related to the scope of activities of this organization.

Fulfillment of warranty obligations provided for current legislation, in the region where the Protherm equipment was installed, is carried out by the seller of your device, a service center, or an organization associated with it under a contract authorized to carry out warranty and non-warranty repairs of Protherm products.

The company performing warranty or non-warranty repairs of Protherm equipment will, during the warranty period, eliminate free of charge all deficiencies identified by it that arose through the fault of the manufacturer. Specific warranty conditions and the duration of the warranty period are established and documented during the sale and commissioning of the device. Please pay attention to the need to fill out the “Sales Information” section, which includes the serial number of the device, sales marks and corresponding seals, dates of sale and the seller’s signature in the warranty cards located on the back of the product passport.

The manufacturer's warranty does not apply to products whose malfunctions are caused by transport damage, violation of transportation and storage rules, the use of anti-freezing coolants, contamination of any kind, including hardness salts, water freezing, unqualified installation and/or commissioning, non-compliance with operating instructions. installation and operation of equipment and accessories and other reasons beyond the control of the manufacturer, as well as installation and maintenance of the device.

The established service life is calculated from the moment of commissioning and is indicated in the documentation attached to the specific product.

The Protherm plant guarantees the possibility of purchasing any spare parts for this product for at least 8 years after its discontinuation.

For Protherm equipment and accessories, the manufacturer establishes a warranty period of 2 years from the date of commissioning, but not more than 2.5 years from the date of sale to the end consumer.

The warranty on spare parts is 6 months from the date of retail sales subject to installation of spare parts by a Protherm certified specialist.

If there is partial or complete absence of information about the sale and/or commissioning, supported by documents, warranty period is calculated from the date of manufacture of the device. Serial number The product contains information about the date of manufacture: numbers 3 and 4 are the year of manufacture, numbers 5 and 6 are the week of the year of manufacture.

An organization that is an authorized Protherm service center has the right to refuse to the end consumer warranty repairs equipment, the commissioning of which was carried out by a third party, if an authorized specialist service center the above reasons will be found and will exclude the manufacturer's warranty.

Advantage of gas heating equipment undeniable. In light of constantly rising energy prices, natural gas remains the most efficient and economical type of fuel.

The worldwide popularity of the equipment determines large number companies specializing in the production of such heaters. For example, floor gas boilers Proterm Bear began to be produced in the Czech Republic not so long ago and has already gained popularity in the domestic and European markets.

Advantages of Medved boiler equipment

1. Natural gas is an environmentally friendly fuel that does not pollute environment, at the same time it is one of the highest calorie energy carriers.
2. A constant supply of fuel from centralized gas distribution systems, along with boiler automation, allows the equipment to operate without human intervention for a long time.
3. The high combustion temperature makes it possible to create boilers of compact sizes, which is important for small rooms.
4. A wide range of models with different equipment capacities makes it possible to select a boiler so that it does not work under load or does not use only part of its power.
5. Safety systems completely eliminate gas leaks and other breakdowns leading to a domestic disaster.

Model range of Medved boilers

The Proterm Bear series of gas boilers is quite extensive and includes the following models:

Bear TLO

This type boilers are produced with a power range from 18 to 45 kW. The most popular model for private houses and small cottages is Protherm Bear 30 TLO, which produces 30 kW per hour and is capable of not only heating the coolant, but also preparing hot water, in boilers indirect heating. For this purpose, the boiler is provided with a pipe for connecting an external heat exchanger.

This model is designed to work in heating systems With natural circulation coolant. The boiler does not have a circulation pump and other electrical elements, which makes the heater completely energy independent. The gas in the combustion chamber is ignited by a piezoelectric element powered by a conventional battery.

Bear KLOM

Model range Bear KLOM boilers include 4 main modifications, differing in rated power. The floor-standing Protherm Bear 30 KLOM has a power rating of 30 kW, which is quite enough to heat a house or production area of ​​up to 200 sq.m². A cast iron heat exchanger allows you to heat the coolant in the system up to +90˚ degrees, while cast iron is not subject to corrosion processes and is not afraid of the acidic effects of vapors produced during gas combustion.

The more powerful 40 kW Protherm Bear 40 KLOM boiler is equipped with flame indicators in the combustion chamber, sensors displaying the pressure of the coolant and its heating temperature at a given minute. The system for removing combustion products from the firebox is natural, but it is possible to install fans that provide forced smoke removal.

The floor-standing boiler Proterm Medved 40 KLOM is equipped with electric ignition and the ability to connect remote control systems. Together with such controllers boiler equipment is able to independently regulate the heating of the coolant and maintain a given microclimate in the premises.

The Protherm Bear 40 KLOM gas floor-standing boiler is equipped with a system that prevents overheating of the equipment and, in particular, the heat exchanger, for which a cooling circuit is provided, which comes into operation if the heat exchanger temperature reaches +110˚C. Another protection of the cast iron heat exchanger is the function of reducing the volume of condensate formed when the boiler is turned off and there is a sudden temperature change.

The most powerful boilers in the KLOM line have a power of 50 kW. and are capable of providing equipment efficiency of at least 92%. Protherm Bear 50 KLOM adapted for work in closed heating networks, With forced circulation coolant.

Bear PLO

The line of PLO boilers is represented by several models with open cameras combustion and a chimney for natural or forced vapor removal. Fans that provide forced removal of combustion products are installed optionally and are not included in the delivery package of the gas floor boiler Protherm Bear 30 PLO or any other model of the PLO series.

The winter/summer system, which can be adjusted once, makes the boiler weather-dependent and makes it possible to automatically change the heating temperature and operating mode according to weather conditions. The most powerful boiler Protherm Bear 60PLO allows you to connect an external boiler to heat water up to 500 liters. Multi-stage power control in manual or automatic mode makes it possible to adjust the heating temperature with an accuracy of 1 degree.

Regardless of the type of exhaust of combustion products, gas boilers Proterm Medved40 PLO are equipped with a draft controller, which ensures timely shutdown of the gas supply in the event of flame extinction as a result of lack of oxygen and smoke in the combustion chamber.

Protherm Bear 20 PLO, despite the minimum power of 18 kW, is capable of operating in systems where the maximum coolant pressure does not exceed 3 atmospheres. The equipment is equipped with electronic fuses and compensators for voltage fluctuations in the power supply system. In regions where power outages are a frequent occurrence, it is recommended to install additional rectifiers or UPS systems.

Heating boilers “Bear” from the Slovak manufacturer Protherm are completely independent of electricity; the source of thermal energy is gas fuel. Proterm Bear 30 KLOM has a heating system that heats water for heating.

If it is necessary to use a boiler to supply the facility hot water a separate indirect heating boiler is used. Depending on the power, the device is capable of servicing objects various sizes and destinations: from private homes to industrial facilities.

Range of boilers Proterm KLOM series

In the KLOM series line, Protherm produces 4 models: 20 KLOM, Proterm Bear 30 KLOM, 40 KLOM and 50 KLOM. All models in this series have electric ignition and a forced exhaust gas removal system. Power - from 19 to 49 kW depending on the model.

All models are equipped with mechanical indicators that reflect the operation of the main boiler systems, in particular the mechanisms reflect the pressure in working chamber, supply water temperature and heat exchanger temperature. With the help of these devices, the boiler is protected from overheating and water in the system rising above +110C.

The automation also prevents the formation of condensation on the cast iron heat exchanger.

All boilers of the KLOM series are single-circuit. This means that such boilers are capable of preparing water for heating premises, but do not have a built-in tank for heating water intended for domestic needs. To solve this issue, it is possible to connect the boiler with an indirect heating boiler.

Proterm gas boilers have certain differences. Specifications boiler 20 KLOM are as follows: heating output 17 kW and boiler volume 20 liters. The 30 KLOM boiler has a heating capacity of 26 kW and 30 liters.

The most powerful boiler in this series is the 50 KLOM, with a heating output of 44.5 kW and a boiler volume of 50 liters.

Also, the models differ slightly in size and chimney diameter. The operating principle of the boilers is identical.

Features of the boiler 30 KLOM

The technical characteristics of which are indicated above successfully cope with heating apartments and private houses. Model 30 KLOM is ideal for a small private house with an area of ​​up to 200 m2, or it can also be a small office.

The main feature of this boiler is its heat exchanger, cast from cast iron. The structure of the heat exchanger involves a stepwise system for transferring thermal energy to water, which ensures economical consumption of fuel and high efficiency, declared by the manufacturer at 89-90%.

In combination with an additional remote boiler, installation in residential premises is even more impossible. Boiler weight - 110 kg, dimensions - 880x420x600 mm.

Has a two-stage power control mode: in winter time year, the boiler will operate at full power, and in the off-season - at reduced power.

Boiler safety system KLOM 30

The manufacturer notes the safety of its equipment as one of its main advantages.

Thus, in KLOM 30 safety is ensured thanks to the following technologies:

• Special traction interruption technology. In case of draft disturbance (objects getting into the chimney, influence weather conditions), the system will turn off the installation, thereby preventing exhaust gases from entering the room.
• Multilateral automatic control. The boiler installation is equipped with special safety sensors that monitor the operation of all installation systems. If any of the systems behaves abnormally, the installation will prevent an emergency situation from occurring. So, if one of the sensors detects a decrease in pressure in the gas pipeline, the operation of the installation will be stopped.
• Overheat protection. This is ensured by the fact that each combustion cycle ends with the pump running out, which removes excess temperature, thereby preventing overheating of the system.
• Error reporting system. On the front panel of the installation there is electronic display, reflecting information about all detected errors and other autodiagnostic procedures.
• Frost protection. This characterizes all Proterm gas boilers. The technical characteristics of Medved boiler systems do not allow ice to form in the system.
• Dual control system. Safety monitoring is carried out in two directions: by collecting information from control sensors and by parallel assessment of the performance of each sensor. If damage to the sensors is detected, the system stops operation heating installation and gives a signal to the user.

The Siberia gas boiler, reviews of which are becoming increasingly common, is a brand of the Rostov manufacturer Rostovgazoapparat. This Russian manufacturer produces heating...

The Baxi company was founded back in the 19th century, and today Baxi devices are recognized by many as one of the best in the industry...