Characteristics
Non-volatile convection floor-standing gas double-circuit boiler Lemax Premium 16 V with a steel heat exchanger for the heating function and a copper heat exchanger for maintaining the hot water supply function. The boiler is designed for heating premises and at the same time preparing hot water for household needs. This model is additionally equipped with burner flame control and a draft sensor; to maintain the hot water supply function, it is recommended to use a boiler (optional). With standard home insulation, a power of 16 kW is enough to heat the house for about 160 square meters. To remove combustion products, a chimney with a diameter of 130 mm is required. The Premium 16 B model runs on natural gas and comes in assembled form with a gas burner device based on Italian automatic equipment 630 EUROSIT. In the production of Lemax Premium series boilers, high-quality steel 2 mm thick, grade DC01, is used, which allows you to operate the device much longer. Open camera combustion implies a method of forming a combustible mixture - air is taken from the room, and combustion products are removed naturally due to the draft created by a stationary vertical chimney. Lemax Premium 16 B meets all safety and environmental requirements established for this type of product.
Peculiarities
- Maximum working pressure in the DHW circuit no more than 6 kgf/cm2
- The unit does not require connection to electrical network
- Starting is carried out using the piezo ignition button
- Equipped with original gas burner components and gas valve Italian concern SIT, as well as an injection microtorch burner POLIDORO
- Availability of a protection system against overheating, draft interruption, soot formation, as well as against boiler blowing out
- Ease of boiler maintenance due to the use of removable cladding elements and profile equipment;
- Ease of cleaning the boiler due to the use of a removable top panel
- Advanced safety protection system (heat exchanger overheat sensor installed)
- Maximum efficiency due to: increasing the heat exchange area, changing the design of the turbulator for maximum retention of exhaust gases
- Increased primary and secondary air flow
- Possibility of switching to liquefied gas(option)
- The body is made of high-quality steel 2 mm with increased flatness
- The heat exchanger has cylindrical shape, which allows the boiler to operate in closed systems with operating pressure up to 3 atm
- Thanks to coating with anti-corrosion enamel CERTA (exposure temperature 750°C) and treatment with an inhibitory compound, the heat exchanger is protected from aggressive factors: salt solutions, mineral oils
Specifications
Boiler type Gas
Mounting method Floor
Combustion chamber type Open
Thermal power, kW 16
Natural gas Yes
Liquefied gas Yes
Chimney diameter, mm 130
Steel
Non-volatile Yes
Manufacturer Russia
Boiler type Gas
Operating principle Convection
Number of circuits Dual circuit
Mounting method Floor
Combustion chamber type Open
Thermal power, kW 16
Natural gas Yes
Liquefied gas Yes
Chimney diameter, mm 130
Primary heat exchanger material Steel
Non-volatile Yes
Manufacturer Russia
Security automation 630 EUROSIT
Gas pipe diameter, inch 1/2
Diameter of connected pipes, inch 2
Vacuum range, Pa 4 - 25
Coefficient useful action,% not less 90
Maximum temperature outlet water, °C 90
Boiler weight, no more, kg 58
Nominal pressure gas, Pa 1300
Heat exchanger volume, l 24.3
Heat removal area, m2 1
Average gas consumption, m3/h 0.95
Flue gas temperature °C, not less 110
Type of gas burner device GGU 19
DHW circuit capacity at Δt=30 °C, l/min 5
Height, mm 744
Depth, mm 491
Width, mm 416
High reliability
IN gas boilers Lemax Series Premium installation work, operating instructions, commissioning, preventive maintenance and repair of equipment are carried out only by specially trained, qualified personnel service centers or employees of the local gas management in accordance with the “safety rules for gas distribution and gas consumption systems”, according to the boiler installation project. Checking and cleaning the chimney, repairing and monitoring the water heating system are carried out by the boiler owner. In the room in which the presented model is installed, it is necessary to provide natural ventilation. To convert this equipment from natural to liquefied gas, you will need a “conversion kit” (nozzle + injector). You cannot use injectors (nozzles) designed for natural gas to operate on liquefied (propane-butane) gas, as this leads to improper combustion and failure of the boiler.
About delivery
- Delivery is carried out on weekdays from 12:00 to 18:00 Moscow time
- Delivery outside the Moscow Ring Road is 50 rubles/km and is paid according to the actual distance traveled by the vehicle. We recommend finding out the exact distance using the Yandex.Maps service
- Delivery over a distance of more than 130 km from Moscow is carried out through transport and logistics companies
- Delivery on weekends holidays, urgent delivery same day, order delivery at exactly the specified time is carried out at increased rates and after agreement with the store
- Upon delivery of the order by truck unloading of goods is carried out by the Buyer
- Approximately 1 hour before delivery, the forwarder contacts the Buyer. If it is impossible to confirm the acceptance and delivery of the order to the designated address, delivery is canceled
- Pickup is carried out after the store confirms the movement of the goods to the point of delivery of the order.
- The forwarder does not advise on issues technical parameters And functional features goods, their compatibility, cost, etc. This information can be obtained by calling our office at contact numbers
- Our vehicles deliver orders along pre-planned routes according to a schedule that provides for high accuracy. Therefore, we ask you to understand that unloading, checking and payment for goods must be completed within 10-15 minutes
About payment
- We accept payment for goods only in rubles for cash or bank transfer
- The price of the goods includes a VAT rate of 20%
- The order is sent to the regions of the Russian Federation through transport companies to the Buyer only after 100% prepayment
- Exact cost Payment is calculated from the cost of goods and the cost of delivery (outside the Moscow Ring Road, for urgency, for the exact delivery time) of the order. Please take this into account
Installation
Our company’s specialists carry out a paid visit to the site, and the cost of the visit is returned upon conclusion of the contract; on the spot, they agree with you on the terms, stages and scope of work, and select equipment and components.
After concluding the Agreement and making an advance payment on time, delivery, installation and commissioning of equipment is carried out. Upon completion of the work, Certificates are drawn up and full payment is made.
Prices for visiting a specialist and installing equipment can be found here.
Service and repair
At your request, the company is ready to enter into an annual contract with you service. The advantage is an extended warranty for work performed and preferential servicing of equipment.
If such an Agreement has not been concluded, you can contact the specialized service centers using the link.
Lemax Premium series heating boilers with a steel heat exchanger are designed for heating and hot water supply of apartments, residential buildings, cottages, administrative buildings, equipped with a water heating system with natural or forced circulation.
Boiler gas Lemax Premium meets all safety and environmental requirements established for this type of product. GOST 20548; t U 4931-011-24181354-2011
Lemax Premium boilers operate on natural gas GOST 5542-96 and are supplied assembled with a gas burner device
Operating water pressure in the heating system is no more than 2 kgf/cm2, in closed system heating system, it is necessary to install a security system with safety valve for a pressure of no more than 1.5-1.7 kgf/cm 2
Steel floor of the Tagonrog plant with a capacity 16 kW used for heating residential buildings And production premises area up to 160 m2.
Gas boiler Lemax Premium - 16 with a steel heat exchanger is produced by the Tagonrog Gas and Heating Equipment Plant.
By contacting our company, you buyGas boiler Lemax Premium - 16 at official dealer from the manufacturer at a price lower than the factory price. In addition, you can purchase everything from us necessary equipment For heating system your home.
Durability:
High-quality steel heat exchanger made from steel from the Magnitogorsk plant;
- heat exchanger 2 millimeters thick made of high-quality steel heat exchanger with enameling and anti-corrosion coating;
- maximum operating pressure 4 bar;
- thermal insulation of the heat exchanger is provided;
- treated with a corrosion inhibitory compound;
- service life 15 years.
Reliability:
Overheat protection;
- protection against traction interruption;
- flame protection;
- protection against soot formation.
Comfort and savings:
Ease of use;
- ergonomic design;
- no requirement to connect to the electrical network;
- equipped with a gas valve from the SIT concern (Italy), saving up to 30% of gas;
- 3 year warranty.
Gas boiler "Lemax" It is possible to convert to propane-butane or liquefied gas (cylinder), just replace the nozzle
.
General Instructions gas boiler Lemax Premium Series
- Before using the heating boiler, please read this manual.
- Installation work, instruction in operation, commissioning, preventive maintenance and repair of the boiler are carried out by a specialized organization and the local gas management in accordance with the “safety rules for gas distribution and gas consumption systems” approved by the State Technical Supervision Authority of the Russian Federation, and building codes and SNIP rules 11-35-76; SNIP 2.04.05-91 of the State Construction Committee of the Russian Federation, according to the project for installing the boiler and mandatory completion of the control coupon.
- The installed boiler can be put into operation only after its acceptance by gas industry specialists, instructions from the owner and the mandatory completion of an installation control coupon (page 21 of the operating manual)
- Checking and cleaning the chimney, repairing and monitoring the water heating system are carried out by the boiler owner. When replacing an old boiler with low efficiency with a modern one, you must pay attention special attention the design of your chimney. When the boiler efficiency is below 80-85%, the flue gas temperature is about 200 °C, which ensures good draft even with a poorly insulated chimney. With an efficiency of 90%, the temperature of the flue gases drops to 110-120 °C, and, in the case of an outdated chimney, the draft disappears, which leads to the automatic operation and shutdown of the boiler. Failure statistics show that 94% of boiler problems are caused by an incorrectly installed chimney.
- Natural ventilation must be provided in the room in which the boiler is installed. It is prohibited to cover ventilation duct grilles.
- The use of boilers at hazardous production facilities is prohibited.
Installation and preparation for operation of the Lemax Premium series gas boiler
- The volume of the room in which the boiler is installed must be at least 8 m3. The distance between the boiler lining and the walls must be at least:
- Natural ventilation must be provided in the room in which the boiler is installed.
- When installing the boiler to heating network it is necessary to lay a sheet of non-combustible material on the floor heat-insulating material, on top - a sheet of iron, install a boiler on it.
- The connections of the boiler to the heating system and the gas main must be threaded, allowing the boiler to be disconnected if necessary. If the boiler is installed to replace an old boiler, it is necessary to flush the pipelines and radiators of the heating system to remove rust deposits, scale and sediment. If these requirements are not met, deposit products (rust, sediment) are transferred to the boiler, which significantly complicates the circulation of the coolant and reduces the heat transfer of the boiler. IN in this case claims regarding the temperature of the coolant during boiler operation are not accepted by the manufacturer.
- With increased heat consumption of the room (thickness external walls houses, integrity of windows and doors, distribution of heating system pipes in attics, attics that are not insulated, exceeding its area or significantly exceeding the coolant capacity - the number of radiators, pipes) from those established by standards, the coolant temperature may not reach 80 ° C, which does not mean boiler defect.
Lemax heating boilers, reviews of which you can read in the article, are devices that are economical and general indicators power ranging from 16 to 50 kilowatts. Having looked at the line, you can choose one of five powers in dual-circuit or single-circuit design. The units are characterized by a high efficiency, which is 90% or more.
Reviews
Lemax boilers, reviews of which will be useful to any consumer planning to make such a serious purchase, are produced as part of a joint production. Irrelevant parts and housing are development trademark Lemax. While all components are supplied by European manufacturers. You can count on high quality cast iron heat exchanger and automation, which are imported from the Czech Republic and Italy.
Consumers especially note the high-quality 4-mm cast iron, as well as the pressure during burner operation, which is 4 bar. Buyers emphasize that the manufacturer paid great attention to protective measures; they are expressed in the thermal insulation that covers the heat exchanger, as well as in the application anti-corrosion coating, slowing down processes that negatively affect materials.
Safety
Lemax boilers, which have the most positive reviews, have a system of protection against soot formation. You don't have to worry about accidental interruption of traction, as well as a possible explosion. This, according to users, forces them to make a choice in the direction of the described manufacturer.
Reviews about use
When choosing Lemax boilers, consumers read reviews in advance, this allows them to understand how outstanding qualities it has this equipment. Those buyers who have been using heating systems on boilers for more than one year note that the described devices differ in two important features, which are expressed in the rapid burning out of the draft sensor, as well as the blowing out of the pilot burner in the wind. That is why, before installing the equipment, according to home craftsmen, it is imperative to consider the height of the chimney and its structure. If you want to prevent blowing, then you should not install a direct a simple pipe, it is important to provide this element with horizontal turns, since transitions significantly reduce the risk of blowing out. Lemax boilers, reviews of which will allow you to understand what features the devices have, sometimes encounter the draft sensor burning out; this problem, according to users, is associated with the unfortunate location of this element, which comes off or is knocked off the contact wires during transportation. Before you start using the boiler, it is recommended to replace the sensor with a new one, this will not become a source of too much high costs, since the cost of the element is 100 rubles.
Description of the boiler "Lemax-Premium KSG-16"
Lemax-Premium gas boilers, reviews of which you should probably be interested in if you are going to purchase this model, are quite inexpensive, for example, the mentioned option costs only 19,800 rubles. This equipment is perfect for creating a heating system in apartments, cottages, residential buildings, industrial buildings and objects for other purposes. The unit can be used in a system with natural and forced circulation. Such floor standing boilers“Lemax”, the reviews of which are the most positive, are made in the form of a welded structure, which forms a water jacket around the perimeter. This component of the boiler borders combustion chamber. At the bottom there are controls. The gas outlet pipe should be used for heating combustion products. The pipe is located at the top of the device. In addition, threaded pipes are provided, which are necessary for connecting to a hot water supply or heating system.
If you purchase a Lemax floor-standing gas boiler, reviews of which will help you understand whether the equipment will satisfy all your needs, you will be able to make adjustments yourself temperature regime. To do this, you should use a special pen that has divisions. With its help you can change the flame in the burner.
Additional Features
If there is a need to create hot water supply, you can use the one presented storage boiler. Coolant will flow into it, spreading through the communication system. The described model has a fairly long service life, which makes it so popular among buyers. Consumers note that big advantage The equipment is non-volatile, which indicates that there is no need to connect the device to the mains. In this way, the user can achieve savings. Among other things, the device is equipped with a special valve, which is responsible for reducing gas consumption by 30%.
If you purchase a Lemax floor-standing gas boiler, reviews of which you can read in the article, then installation work will not take much time, and where specialists should be involved, will take place in the shortest possible time.
Description of gas boilers of the Leader series from the Lemax company
Lemax-Leader boilers received the most positive reviews, this is due to the fact that high-quality 4 mm gray cast iron is used in the manufacturing process, the heat exchanger is treated with an inhibitory compound that prevents corrosion. Such equipment can be installed in a residential area with an area of up to 500 square meters. By visiting the store, you can select the power of the unit ranging from 16 to 50 kilowatts. The maximum operating pressure of the device is 4 bar, and the efficiency reaches 91%. The units are equipped with a traction interruption protection system. As practice shows, the service life reaches 25 years, and the warranty applies to the equipment for 3 years.
Distinctive features of the Leader series with automatic 820 NOVA SIT
The units are very convenient to use, since the temperature regulator is located on the front panel. This allows the user to select the most suitable thermal mode as accurately as possible. You can adjust the boiler temperature in relation to the indoor temperature using room thermostat, which greatly simplifies the use of heating equipment.