How to decorate white wallpaper for painting. How to choose a roller and other painting tools? Gradient combination - variety of colors

Which ones look so impressive? There are hardly any big fans of decorating rooms, and drawings on the walls quickly get boring. I would like to update the “clothes” of my home more often, but fiddling around with removing old wallpaper layers is so tedious. Paintable wallpaper comes to your aid.

Painting wallpapers are usually white or pastel shade, without pronounced patterns. Buying wallpaper for painting and experimenting with it in different colors means bringing unique design ideas to life and creating in your own home stylish, luxurious space.

Where to start choosing

• Persistence. Non-woven fabric has good noise and moisture insulation. Such wallpaper does not emit harmful substances and odors.
• Durability. Vinyl can withstand up to 10 layers of paint (service life may vary and depends on the climate in the room).

Non-woven fabric also has a drawback - its textured coating does not withstand mechanical damage and wears out quickly. Therefore, non-woven wallpaper for painting must be painted immediately after pasting.

Fiberglass. The most expensive type of paintable wallpaper, but the money for them will not be given in vain. Thanks to special manufacturing technology, glass wallpaper boasts a long range of advantages and disadvantages:

• Environmental friendliness. Fiberglass does not attract microorganisms - they will have nothing to feed on such walls. This ability is especially important in children's rooms And bedrooms .

• Strength. The interwoven fiberglass structure is reliably protected from any damage. Children are big fans of poking at the walls with toys, and just drawing or scratching them. Fiberglass will withstand such tests.
• Durability. Walls covered with fiberglass can be painted up to 20 times. This means that such wallpaper will serve you faithfully for about 30-35 years.

• Easy to care for. Painted walls can be easily washed with any detergents household chemicals. Fiberglass wallpaper for painting in the interior has increased stability to chemical compounds in any substance.
• Fire safety. Even in the event of a fire, such wall covering will not release harmful, toxic substances. This wallpaper has received full fire inspection approval (this is confirmed by quality certificates).

• Beauty. The surface of the glass wallpaper can be of any texture, ornament, imitation of various patterns (herringbones, diamonds, matting, cobwebs, etc.).

Fiberglass wallpaper will require special handling when gluing. While working, be sure to protect your body from microparticles of fiberglass (otherwise you will itch). Before gluing, a latex primer must be applied to the walls.

Let's get started

The best wallpaper paint for painting is a coating made from water based(latex, dispersion or acrylic). Such paints are environmentally friendly, allow air to pass through well and have increased light fastness. They are divided into two types:

• Glossy. Colored gloss can very expressively highlight the textured pattern of the wallpaper and create a particularly durable coating on it.

• Matte. They will perfectly hide unevenness and imperfections in walls after painting.

In addition to paints, we will also need tools. For working with coloring materials on wallpaper, velor or sheepskin rollers with medium pile are ideal (foam rollers can create tiny air bubbles and deform the top layers of coatings).

When decorating the interior of a house, the owners always give it individual features and characteristics. In this matter, it is not so much the choice of style that is important, but the various nuances that influence its perception. One of the main points is a good color scheme. Today's construction market literally overflowing with a variety of materials, the use of which will help bring to life your fantasies about creating a unique and vibrant look for your home. These include paintable wallpaper, which is also called textured or structural.

They do not have a multi-color pattern, but can have either a textured or smooth coating. This method of decorating rooms is becoming more and more popular, and not at all because paintable wallpaper is cheaper than colored wallpaper. When taking into account the cost of all materials, the finishing will cost more. The main advantage is the creation of a unique individual design.

You shouldn’t think that any wallpaper is suitable for painting, and you need to choose a special paint. All finishing materials and their color must correspond to the characteristics of the room: area, level of natural light, future operating conditions, etc.

Types of wallpaper for painting

Painting can be done on paper, non-woven, vinyl and glass wallpaper.

Paper wallpaper can hide small cracks in the walls and is perfect for any surface. As a rule, canvases that are used for painting consist of two layers. Thanks to special water-repellent impregnation they retain their good appearance even after several repaints.

Paintable vinyl wallpaper is even easier to work with than paper wallpaper. The glue is applied only to the wall, the canvas does not swell. It is a very durable material, often chosen for new homes where wall shrinkage is expected. The disadvantages include the possibility of causing mechanical damage to the relief coating.

Fiberglass wallpaper is considered the most durable and strong, but it requires special handling. They can be repainted multiple times (up to 20 times). Here it is advisable to use acrylic and latex paints.

More information about glass wallpaper

Since most often when choosing wallpaper for painting, consumers choose glass wallpaper, let’s look at this type in more detail.

1. There are two types of glass wallpaper: 1. Canvas in rolls, on which a textured pattern is applied. They produce finishing premises. 2. Fiberglass (cobweb). Used to reinforce loose walls and mask small cracks.

Fiberglass material has a number of positive qualities:

1. Hypoallergenic and environmentally friendly. This type of finishing is recommended for people who suffer from hypersensitivity to chemical compounds that can be released by conventional coatings, such as non-woven fabrics.
2. Fire safety. Glass wallpaper does not burn and, when heated, does not emit harmful substances.
3. Versatility. Fiberglass sheeting can be glued to both walls and ceilings. The material holds up remarkably well and is guaranteed to last for a long time - up to 20 years.
4. High wear resistance. Can be painted multiple times (up to 20 times), withstands mechanical stress well, and is easy to wet clean.
5. Economical. At an initially high price, it is necessary to take into account long term service, as well as the fact that there will be no additional costs for special preparation of the walls before gluing. The material is used on both concrete and wooden surface, as well as on old paper wallpaper.

Among the shortcomings, one can note only a small selection of drawings.

Paintable wallpaper with 3D effect

The texture of wallpaper with a 3D effect can repeat, for example, the curves of hemispheres protruding from the wall. But such a solution is acceptable only for special and ultra-modern interiors; experts recommend not to get carried away and stick to finishing only one wall with a similar coating.

How is wallpaper painted?

The principle of working with all types of canvases is the same. When purchasing material, it is better to opt for white. If the initial tone is too saturated, the result may not meet your expectations in terms of the resulting shade. First you need to purchase paint, a tray to distribute it evenly, masking tape, a roller and brushes. When purchasing a roller, check to see if any lint is being pulled out from the base.

The process of painting a canvas is not fundamentally different from the same work on other surfaces. But before the first painting, it is necessary to carry out preliminary surface preparation. It is advisable to take care in advance that the wallpaper glue does not get on the front side of the canvas to be glued. Otherwise, it must be removed.

Be sure to apply masking tape along the ceiling as a demarcation line. A textured surface is best treated with a long-nap roller. Dip it into the paint in the tray and paint the wall from top to bottom. Treat corners and areas near the baseboard with a brush. For ceiling work, it is better to purchase a tool with a long handle.

You can paint more than one color. In this case, the wall is divided into sections (you will also need masking tape). If you need to make repairs in a children's room, then with the help of special stencils that are sold in specialized stores, you will be able to turn it into a holiday, and the work itself into interesting game. Drawings on the walls can also be made using stencils made by you personally.

When painting, try to avoid smudges and streaks - if they occur, immediately roll out any errors with a roller. Interesting effect obtained by using two colors. This can be achieved in two ways:

• The first is more complex, but the coating is more reliable. Needs painting reverse side vinyl wallpaper. The relief pattern and the base have different densities, so the paint will appear on the front side with different intensities, as a result of which you will get a more interesting texture.
• According to the second method, painting is done on an already pasted canvas, and then they go over the relief with a damp sponge, washing off the paint on it. A play of shades of the same color is created. Using a sponge, if necessary, a second, contrasting shade is applied, but after the first layer has dried completely.

How is repainting carried out, and how to calculate paint consumption?

When re-painting, it is better to use the same type of paint that was already applied before. Before starting work, it is necessary to clean the working area from dust and degrease stains.. The color of the new walls should be the same or darker. When choosing more light shade you will have to apply an additional layer so that the bottom one does not show through.

To calculate material consumption, the area of ​​the proposed work is measured: the area of ​​doors and windows is subtracted from the total area of ​​the walls. The manufacturer indicates consumption guidelines on each paint can. There may be slight differences on the item different manufacturers, but, as a rule, it is 150-180 g/m2 for single-layer painting and up to 240 g/m2 for two-layer painting.

What else needs to be considered when choosing a material?

The main thing is choosing the right texture. If you settle on a correct, mathematically precise drawing - a geometric pattern, the wall will come out very strict and monotonous. With an unpredictable and chaotic arrangement of the image (imitation of crumpled paper), it may seem rough and careless.

Without wanting to resort to extremes, you can choose a middle ground - for example, fine texture in a chaotic pattern or zigzag bulges that soften chaotic lines. You can choose a repeating pattern, but with complexly curved, streamlined lines, leaves, flowers, diluting the monotony and not associated with geometry.

The sizes of the drawings also have great importance. The imitation of large cracks attracts the eye, while small cobwebs escape attention. But the larger the image fragments, the closer the object is visually perceived. Therefore, such a print on wallpaper will not suit a small room; it will make it even smaller. For small rooms it is better to choose a smooth fabric, a small chaotic texture or a repeating pattern small size- up to ten centimeters.

You cannot say that some designs or textures are beautiful, fashionable, etc., and others are not. Each consumer will choose something according to their mood and discretion. If you are a fan of regular, repeating, strict and clear lines, wallpaper with simple elements is suitable for you. And one more nuance: pronounced textures do not combine with glossy paint. Such work will look, to put it mildly, strange. Large-textured wallpaper and matte and semi-matte dyes fit together more organically.

Are there any advantages to smooth-textured materials?

1. They are easier to work with. Even if this is your first time painting wallpaper, you can do it easily. They can be repainted five to six times. How much can you save without doing long time full renovation?
2. You can draw patterns on them and use different colors, which is difficult to do on textured canvases.
3. Smooth-textured wallpaper is often chosen by creative people who prefer variety in the interior.

Which wallpaper to choose for painting is your decision, but here’s another piece of advice: don’t skimp on paint. You may have to spend a lot of money, but your walls will have a wonderful look and will last longer. We wish you successful renovation and comfort in your home!

Paintable wallpaper is the dream of any designer, a discovery for a builder and a godsend for many owners. These coatings make all subsequent repair work an easy task that does not require large financial and time expenditures, because they can be painted many times without having to perform complex surface preparation.

Peculiarities

For many reasons, more and more people are deciding to hang wallpaper that can be repainted in the future. This kind of renovation is now at the peak of popularity. It is not surprising that this particular decorative material became the hero of our conversation. Why you should stick wallpaper intended for painting in a room:

• increased sound insulation;
• Creation cozy atmosphere;

• a large selection of design solutions that can be brought to life;
• organizing a protective coating on the wall;
• a wide range of texture solutions.

How many times can you repaint?

An important advantage that is typical for such wallpaper is repeated painting. The number of stains may vary within 10-15 times.

It is not recommended to paint a coating with a pronounced relief pattern too often. The pattern will be smoothed out with each coloring and nothing may remain of the relief.

Smooth wallpaper and fine-textured coatings withstand repeated staining better. In both cases, the material itself will not suffer from frequent staining.

What varieties?

Not all wallpaper can be used for painting - this should be well understood by everyone. Even those canvases that are intended for dyeing differ significantly. The choice must be approached consciously, with knowledge of the matter. We will tell you what such materials are called, what features you need to focus on, and also introduce you to the distinctive characteristics and reveal important secrets. Let's take a closer look at what wallpaper can be used for painting:

• Paper Wallpaper is attractive due to its accessibility, so many choose this option for applying pigment. This decision has the right to life, but only if two-layer wallpaper is chosen. Due to its high strength and reliability, the decorative material can withstand the painting process. It is not worth carrying out such experiments with single-layer materials, so as not to have to re-glue the walls later.

• Liquid wallpaper can be painted, but you need to carefully select the color and know how to combine different shades. the main problem consists in shining through the color of the material through the pigment layer. Applying paint in a thick layer is not a good solution, since in this case the texture of the liquid canvas will be hidden, and the walls will be ordinary, even.
• Vinyl Although the materials are created on a paper basis, they are more durable than simple wallpaper. They tolerate the application of pigment much better. The range of vinyl materials includes a category of washable models. It is strictly forbidden to paint such wallpaper, since it will not be possible to obtain a normal result. The paint will not be absorbed or at least linger on the surface, so you will get streaks and drips.

Vinyl wallpapers

Liquid wallpaper

• Options n and non-woven base They are best suited for changing color by applying pigment, which is why they are most often chosen. Moreover, surfaces with such a finish can be repainted repeatedly - like wallpaper negative influence will not be provided. Even old non-woven fabrics can simply be repainted, which allows you to significantly save on repairs.
• Glass wallpaper- Another one good option for our case. But they are less likely to become the user's choice because they are expensive. But their reliability and durability justify all the costs. This type of coating is created specifically for painting.

Glass wallpaper

Non-woven wallpaper

Special wallpaper intended for painting has a significant advantage over conventional decorative materials.

They can be used as ceiling finishing, and they are available in a large assortment: simple, ceiling, vertical, exclusive, with various sets characteristics, textured.

What to glue it to?

The process of gluing wallpaper determines the success of the entire undertaking, so this process must be approached responsibly, follow the technology and adhere to the rules. The gluing technology differs depending on the selected type of wallpaper. In order not to worry about whether the wallpaper will stick well to the surface, these application rules must be followed:

• Paper webs do not require impregnation; the adhesive composition is applied directly to them.
• In the case of vinyl wallpaper that has a paper base, impregnation is necessary. The adhesive composition is applied over the canvases and left to absorb for the time specified by the manufacturer.
• Fiberglass wallpaper does not need to be coated with glue. They are applied to the wall dry, and glue is applied to the surface.

In order for the wallpaper to stick to the walls efficiently and firmly, you need to learn how to choose glue. In this matter, you should focus on the weight and density of the canvas:

• Lightweight paper wallpaper can be glued with a compound designed for lightweight fabrics. It is based on methylcellulose.
• Heavy wallpaper will not stick to this composition. They will require a more reliable and durable adhesive material. For example, PVA-based glue.
• A special composition is designed for working with glass wallpaper.
• You can glue wallpaper onto water-based paint, but only non-woven wallpaper. First you need to conduct an experiment on a small piece of canvas. If it has set well, then you can use a similar method for the rest of the surface.

You also need to familiarize yourself with some of the subtleties of gluing wallpaper for painting, which will allow you to get the perfect result:

• The base does not need careful leveling. Of course, large irregularities will have to be eliminated, but minor defects can be left. Moreover, it is permissible to choose semi-matte paint that will hide existing imperfections. The surface must be the same color in order to new finish was applied evenly.
• The old water-based paint coating does not need to be removed, as it is a good base for the new finish.
• Water-based paint also does not need to be removed.

• Oil paint cannot be reapplied with new paint. decorative layer. It will have to be completely removed from the surface.
• If there is a pattern on the wallpaper, then the length of the canvas will have to be 5 cm longer. This reserve will allow you to combine the coatings and make the design seamless. Wallpaper that will be painted in the future must be glued to the joint. If there are places with overlap, the paint will highlight and draw attention to these imperfections even more.

What to paint with?

If the choice is made incorrectly, the wall decorative layer will not be strong enough, beautiful, durable and resistant to external factors.

The following paint is available on the construction market.

Water based

Such compositions lead in sales. They are easy to work with, they are inexpensive, and the range is impressive, including not only colors, but also textures (matte, glossy). Matte compositions look attractive on the wall and are able to hide minor surface imperfections.

The gloss looks more solemn, but it should be applied exclusively to an ideal wall that does not have the slightest defect. With water-based coloring compositions, you can easily choose the desired color. To accurately guess the desired shade, you need to make test strokes and evaluate the result.

Latex dispersion

Such paints benefit from environmental friendliness and safety. This composition must be used up quickly, since it dries a few hours after opening the package. Although the painted surface will dry for about 3 days.

Magnetic

Not long ago, the modern market building materials started offering magnetic paint. After applying it, magnets will stick to the surface. First of all, this decision will be relevant when decorating children's rooms. In addition, in any other room you can select a section of the wall for placing small decorative elements, which will be attached with magnets.

This paint is available in a limited range of colors, Moreover, tinting is impossible. Although color is not added to such compositions, a layer of decorative composition is easily applied on top of the dried magnetic paint the desired shade.

Alkyd

Such paints are expensive, but reliable and durable. Such compositions are used to cover walls that are subject to intensive use and are subject to rapid wear.

It is important to use alkyd compositions for retail facilities, public places and production workshops.

The paint can be applied with a brush. In this case, there will be no traces of such a tool on the dried surface. This paint is heat-sensitive and even flammable, which should definitely be taken into account when carrying out repairs.

Acrylic

Acrylic compositions are no less popular than the materials described above. The range of such paints is huge, starting with the area of ​​use (for facade work or internal) and ending with various textures.

Oily

Such compositions cannot be used for painting wallpaper. Solvent-based paints are especially prohibited. Such substances have a negative effect on wallpaper.

The choice of paint should also be based on the type of wallpaper used on the walls. This point is important, because everyone wants to get a high-quality and durable result:

• It is better to treat paper materials and glass wallpaper with latex compounds, which do not have a pronounced effect on the base. Also, water-based paints are well suited for wallpaper with a paper base.

• For non-woven wallpaper, you can choose latex compounds or use acrylic paint. The last option is more affordable. Experienced builders coat the painted surface with varnish, due to which the decorative coating becomes moisture-resistant and impervious to conditions of intensive use. After this treatment, re-painting becomes impossible.
• For vinyl sheets acrylic compositions are intended.

If you plan to make a textured surface, then multilayer painting cannot be used. In this case, the texture of the wallpaper will be smoothed out. To paint the canvases on the ceiling, coloring materials are selected, the principle does not change. Whatever material you choose, you need to choose high-quality coloring compounds. The desire to save money can lead to negative consequences, and the result will be far from expected.

Color solutions

The use of colors when painting wallpaper is a popular trend that is actively used by experienced builders and beginners. To obtain the desired shade, the color is added to white water-based paint or mixed with acrylic compounds.

Color is a rich pigment that allows you to change shade liquid wallpaper and coloring composition for finishing canvases.

It will be difficult for an inexperienced person to work with these compounds, but still such a process is quite doable. You will have to spend a lot of time until you get the desired shade.

Don't be afraid to experiment. First you need to take a small amount of paint and add color in portions. As soon as you get the desired combination, you can take on a large amount of coloring material. The shade should be constantly checked on an unnecessary piece of fabric. In this case, you can clearly see the future result.

If you don’t want to experiment, take risks and waste time searching for the perfect shade, you can use the computer tinting service. A special program will hold accurate calculations and will give the right amount of color, which will allow you to get the desired shade.

In order for the room to be not only original, but also harmonious, it is necessary to carefully consider the future interior. Everything matters: the pattern on the wallpaper, its texture and shade. The market for such coatings is crowded, so you can easily find suitable option, in which all the wishes of consumers will be embodied. Think carefully about the texture decorative covering: Your wallpaper will have a pattern or a smooth surface will be more successful. Textured wallpaper can be with flowers, imitation brick, stonework, or a geometric pattern.

When choosing a shade, you need to focus on the type of room and the features of its use:

• Children's room requires a choice of pastel and calm shades. For girls, you can choose peach, pink, beige, and cream colors. For boys, blue is more suitable, although many tones are universal. Children's dreams come true in a new type of wallpaper. They are embossed, made in the form of a large coloring. For a little artist, this solution will be most to his liking, because he himself will be able to design his room. The main thing is to always have bright, colored paints on hand.

• For registration office premises Wallpapers that imitate natural materials are often chosen. Bright and dark shades are excluded in this case; for example, red walls will not create the necessary working atmosphere.
• To the bedroom You can choose smooth wallpaper, and decorative, fine texture is also allowed. For tinting it is better to choose pastel shades, although dark shades can look beautiful if a decent ensemble of colors is created.

• For registration bathroom voluminous textures in wallpaper and dark colors in color. If visual expansion is necessary, you should use coatings with a fine white pattern.
• Living rooms give free rein to imagination. Here you can implement bold ideas, for example, combining two colors. If one wall is painted in one shade and the other surface is painted in another, the space will visually expand and the room will be divided into functional zones. In combination, with a sense of style and tact, you need to choose colors so that they combine with each other and create the desired atmosphere.

Existence different technologies applying paint allows you to get different results. For example, if you apply paint to the inside of the canvas, the shade will turn out soft and unusual. You can also combine two colors on embossed surfaces. To do this, you need to apply one layer, wash it off from the protruding pattern and paint it a different color using a foam roller.

Paintable wallpaper is a designer's dream. You can create with them original interiors, implement bold ideas and repaint walls with minimal investment.

Work order

You can paint the wallpaper in your apartment yourself. Moreover, it is quite simple. The whole process is described below, it is divided into several stages. Stick to this plan and painting the wallpaper after hanging will go as smoothly as possible. The paint layer can be applied only on a well-dried surface. First, gluing follows, then the surface is left to dry for several days. Only after this can you proceed to coloring.

Surface preparation

At this stage you will need to clean work surface, protect the floor, windows, heating system elements from possible drops of paint. The surface should be free of contaminants and pathogens. The wall should not only be clean, but also dry. Please note that not all wallpaper can easily survive wet cleaning. Skirting boards and areas where walls meet the ceiling must be protected with masking tape.

Before applying wallpaper, you need to turn off the power supply, dismantle sockets, switches and cover the wires with polyethylene.

Primer

It is imperative to prime the wallpaper before it is painted. This processing technology will reduce paint consumption, reduce the likelihood of stains, and strengthen the wallpaper fiber. To do this, you need to prepare a wide roller, brush, tray and material for application. It is better to use latex primer material. It will additionally provide protection from moisture.

The primer is poured into the pan. You need to be able to roll the primer correctly. Too much of it is not required so that there are no smudges on the wall. The roller is dipped into the solution and excess material is shaken off. The primer must dry. As a rule, this takes up to 12 hours.

Tinting

Now is the time to give the coloring composition the desired shade. Similar actions should be carried out once, since in the future it will be almost impossible to recreate the exact shade. Pigments are available in various forms. The most common are dry and pasty options. The preparation of dry pigments involves dilution with water, and the paste can be immediately added to the coloring solution.

Painting wallpaper is one of the popular types of finishing, which provides long-lasting aesthetic appearance interior and will allow you to change the color of the walls at any time.

Painting wallpaper for painting yourself is not particularly difficult.

The main thing is to choose the right working material and tools.

What wallpaper can be painted?

When choosing wallpaper for painting, it is important take into account their structure, coating and thickness. Not all types of wallpaper can tolerate pigment well.

With the quickly established fashion for painted wallpaper, manufacturers of finishing materials began to produce special wallpaper for painting. Their main advantage is strength, wide variety color range and good pigment sensitivity:

Which ones are better to choose?

Most best option – non-woven and vinyl wallpapers . This type of finishing is intended specifically for painting. Let's look at their differences, advantages and disadvantages.

Vinyl

This type of wallpaper consists of two layers. The first is paper, the second is PVC. Due to this, they have high strength and elasticity. Their main advantage is fire resistance and water resistance.

They can be washed with water and cleaning agents.

After cleaning, the top layer will remain in its original form. Such wallpaper are not afraid of direct sun rays , which means their color will not fade and will retain its original brightness for a long time. Vinyl wallpaper is also not susceptible to mechanical damage.

Wallpaper layers impregnated with a special antifungal composition, which does not allow mold to form at high humidity. Therefore, they are often glued in the kitchen and bathroom.

They come in a wide variety of shades and textures. Manufacturers produce coatings that imitate tiles, wood, fabric and even leather.

There are vinyl wallpapers three types:

1. Foamed.

They have a textured surface, making them ideal for finishing uneven walls. The only negative is that they are less moisture resistant.

2. Silkscreen printing.

They differ in the content of silk threads in the layer. They retain their color and structure for a long time, but are more expensive than their analogues.

3. Washable.

Washable vinyl wallpaper is most often used for finishing baths and kitchens. Their waterproof surface protects walls from moisture and fungus. They are easy to clean, withstand constant humidity, and do not fade.

The disadvantages include the presence of a synthetic layer that does not allow air to pass through and releases formaldehyde.

Non-woven

Non-woven fabric is made of cellulose bonded with polymer fibers. In its composition it is close to ordinary paper wallpaper, but unlike them, it has increased strength and fire resistance. This type of finish allows air to pass through well, allowing the walls to “breathe.” Another advantage is that dust does not settle on the surface.

Wallpaper based on non-woven fabric does not require special care. To remove dirt, use a damp cloth or sponge. They are not afraid of water, are not subject to fire and fading.

Their undoubted advantage is that during repeated repairs they do not need to be torn off from the walls - new wallpaper can be glued directly to their surface.

The only downsides we can highlight are exposure mechanical stress . Scratches and cracks can easily form on the top layer if you protect the walls from the influence of external factors.

Unlike vinyl wallpapers, non-woven wallpapers are much more expensive, and the design solutions are not particularly diverse.

Painting wallpaper is a very responsible process. After all, in order to get the desired shade, you will need to master tinting - mixing several colors. For painting, as a rule, choose white wallpaper.

If the shade is not particularly important to you and you don’t want to spend more funds and time for repairs, then you can stop your choice on colored wallpaper.

Primer before painting

Before you paint the wallpaper, you will need to prime it. This will allow the paint to adhere better to the surface without streaks or bald spots. In addition, using a primer you can reduce paint consumption and strengthen the fiber. For the procedure you will need:

• wide roller;
• paint brush;
• plastic pallet;

Before you begin the process, cover the baseboards and floor with newspaper or plastic. Make sure that the glue under the wallpaper is completely dry and the walls are ready for further work.

Pour the primer mixture into a tray, dip the roller in the liquid, gently squeeze out or shake off the excess and get to work. You should not put a large amount of solution onto the roller, as in this case it will will flow down the wall.

In some hard-to-reach areas of the wall (under the window sill, corners, near radiators), use paint brush. It is not convenient to work with a roller in such places.

Treated walls dry in about 12 hours. Only after the primer has completely dried can you begin painting.

How to paint correctly without streaks?

To avoid streaks and smudges, you should follow several rules:

1. Exposed areas of walls should be painted with a roller, not a brush.
2. Painting should be done in two opposite directions, with the final movement being done from top to bottom. This will help avoid streaks and give the right visual effect.
3. Apply paint in a thin layer. You should not put too much paint on the roller, as during operation it may drip down, forming smudges. Before bringing the roller to the wall, carefully shake off any excess compound into the tray.
4. Try to move the roller evenly with equal pressure, evenly distributing the pigment over the surface.
5. The first thing that needs to be painted is the areas under the ceiling and near the baseboard.
6. You can start painting from a window or corner. You should not approach this process chaotically. Visually divide the wall into sectors and carefully paint each of them.
7. To prevent smudges and stains, blend the paint with a dry roller, carefully walking it over the surface. This is not necessary if you get an even layer the first time.
8. After the paint has completely dried, apply a second layer in the same way as the first time.

The drying time of painted wallpaper depends not only on the choice of paint, but also on the temperature and humidity of the air in the space. At room temperature with normal humidity, acrylic paint dries within 1-1.5 hours, and during 30-60 minutes.

How many times can you repaint old wallpaper?

The durability of wallpaper for painting is confirmed by the fact that it can be repainted and updated up to 10-15 times.

If this is a surface with a pronounced relief, then be prepared for the fact that after each coloring it will gradually smooth out, losing the original pattern. The canvas itself will not suffer at all from frequent painting work. Resists repainting much better smooth or fine-textured wallpaper.

Which roller and paint should I choose?

When choosing paint, be guided by its characteristics and purpose. Different types of paints are selected for this or that type of wallpaper.

Water-based paint has a number of advantages - environmental friendliness, durability, absence of a specific odor, ease of application, affordable price. In addition, it dries quickly.

Acrylic paint Suitable for working with most types of wallpaper. Doesn't have unpleasant odor, contains antifungal additives.

For non-woven and paper wallpaper Any water-based paint is suitable. When working with vinyl wallpaper, it is recommended to use latex-based acrylic paint. If the vinyl wallpaper is non-woven based, then water-based wallpaper is also suitable. Both water-based and acrylic paints are used to paint paper wallpaper.

To obtain the desired shade, white emulsion or paint mixed with colors. This is a rich pigment used to impart the required color to liquid, non-woven and vinyl wallpapers.

Tinting– a rather complicated process for beginners. Getting the right shade of paint can take a long time. The most important thing is to mix the paint and color in the right proportions.

The first time the result may not meet expectations, so designers recommend experimenting with a small amount of paint first. As soon as you manage to get the desired color, the color and paint need to be mixed in a larger volume while maintaining the original proportions.

When tinting, don't forget to test the shade on a scrap piece of wallpaper to see how it will look on your walls.

The choice of painting tool sometimes affects the quality of the finish more than the paint itself. It is recommended to use fur roller with long pile. If you don’t have one at hand, you can tightly wrap a piece of an old faux fur coat onto a regular roller.

What is the advantage of such a tool? Due to the long pile, it carefully paints the surface relief throughout its entire depth. Foam rollers are not suitable for these purposes, since they work only on the surface layer of the design, which means they can leave behind bald spots.

For processing corners and hard to reach places use a narrow paint brush and short (up to 50 mm)

Ideas and color solutions

In order for painted wallpaper to fit harmoniously into the interior, you need to think in advance about the color, pattern and texture of the finishing material. Wallpaper manufacturers today offer wide choose a wide variety of wallpapers for painting - embossed, smooth, with textures like wood, brick, masonry and others.

Perfect for a child's room textured non-woven wallpaper pastel shades – peach, beige, cream, pink, blue. Moreover, there are special children's embossed wallpaper-coloring pages that allow the child to feel like an artist or interior designer.

Embossed wallpaper with natural textures - stone, brick or leather - look harmonious in the office. When choosing a paint color, try avoid bright, neon and dark shades. Remember that the environment greatly influences the work environment in the office.

The ideal option is wallpaper with a fine texture or smooth surfaces. You should not glue wallpaper with a three-dimensional relief in this room, as it gives a feeling of rigor and officiality. As for the shade of paint, the pastel, calm colors of the palette will fit well here.

Looks beautiful in the bathroom volumetric textures - in the form of tiles, bricks or other geometric elements. Optimal shades are blue, green, purple, black, gold, gray, red. If the bathroom is small, then you can visually expand the space using white wallpaper with a fine texture.

In the living room you can use any textures and shades you like. Just remember that volumetric relief surfaces visually “eat up” the area of ​​the space. Therefore, in small rooms it is recommended to glue fine-textured wallpaper.

If you want to diversify the interior of the room in an interesting way, giving it some zest, you can paint one wall with one color, and the opposite or adjacent wall with another. This will increase the space and visually divide it into zones. The only thing that needs to be taken into account is the combination of shades.

Painted wallpaper is not only a modern solution, but also practical. Tired of color? It can easily be repainted into something else. Has your wallpaper gone bad? It is not necessary to peel them off in order to stick new ones - you can lay them on an existing layer.

Ease of use and a wide variety of wallpapers and paints make this type of decoration popular among most people.

Find out how to properly paint wallpaper with your own hands from the video:

The construction market offers a huge variety of different finishing materials. But wallpaper, despite the abundance of other interesting options, is in no hurry to “lose ground” in the category of popularity. Among the wide range of such finishes presented, it is quite possible to choose the most suitable option for a particular interior - according to pattern, texture, color.

For those who want to save on future repairs, wallpaper that is designed for subsequent painting is perfect. Thus, the pasted canvases become a kind of “blank canvas”, opening up the possibility of further artistic expression of the designers. But choosing such material also has its tricks. Therefore, it makes sense to consider the question - what is the best wallpaper for painting? Let's take a closer look at the characteristics of such wallpapers, made from different materials, and compare their practicality and decorativeness.

In addition, the appendix to the publication will provide practical recommendations for determining the required number of rolls of wallpaper - a convenient calculator with detailed description calculation procedures.

It must be said that in last years The vast majority of professional designers prefer wallpaper for painting. The fact is that with their help it is much easier to give the interior the desired color style by applying different shades of the same color or combinations of colors in intended harmony to the walls.

In addition, if desired, the surfaces can be easily repainted, which is much easier to do than removing old wallpaper and preparing the walls for a new coating. It should be noted that some versions of canvases with a pronounced relief can be painted in different shades, and so that they cannot be distinguished from ordinary colored wallpaper with a rich design. However, similar method transforming the walls of a room requires patience and developed artistic skills.

The service life of wallpaper and its wear resistance, the ability to “survive” one or another number of repaintings, depend on the material from which the canvases are made. That is why, in order to decide on the choice of wallpaper, you need to know its main characteristics.

Most canvases intended for dyeing are produced in white and have a certain relief, although there may be exceptions to this rule.

So, the following types of wallpaper for painting go on sale:

• Paper canvases.
• Fiberglass.
• Non-woven wallpaper.
• Linkrust wallpaper.

Each group has its own “internal” division. The characteristics, advantages and disadvantages of the various species of this large “family” will be discussed further.

Paintable paper wallpaper

General information

You should not think that paintable paper wallpaper is the same as ordinary thin paper wallpaper, which was previously the most common and were used for gluing walls in almost every home. Nowadays, technology has gone far ahead - the consumer can choose from different types of paper wallpaper, which differ significantly from each other both in characteristics and in price.

There are two main types of paintable paper wallpaper on sale – two- and three-layer canvases.

• Double-layer wallpaper consists of two paper layers glued together. As a rule, this type of canvas has a small or uniform relief that does not require matching the pattern.

Wallpaper is also widely used with a deeper embossed volumetricsystematized a pattern that requires careful adjustment when joining the paintings on the wall.

Deep relief allows you to create complex coloring using one, two or even more colors, which are applied in turn. Application of several paints is carried out using different techniques, depending on what effect is planned to be obtained as a result.

A three-dimensional pattern is applied to two-layer wallpaper using the embossing method. The manufacturing technology is that two paper sheets glued together are passed through special rollers with a relief applied to them, which leaves its imprint on the paper. The outer side of the wallpaper has a protruding relief, while the wrong side of the pattern is concave.

• Three-layer paper wallpaper, at first sight, They are no different from two-layer ones, but they are noticeably heavier in weight. This type of canvas is equipped with a third, reverse, smooth layer of paper, which covers the convexity of the relief pattern. This back layer is designed to improve the adhesion properties of the canvases to the wall surface, which greatly simplifies and speeds up the gluing of the material. In addition, the relief practically does not wrinkle when smoothing the canvas. Can be applied to three-layer wallpaper large quantity layers of paint. They are more securely held on the wall and look very presentable.

Since this type of material is thicker, it can produce more complex relief designs that require alignment when gluing them.

A very interesting option for three-layer paper wallpapers are canvases, inside of which there are small wood shavings, which give the surface a relief pattern. The design of the wallpaper will depend on what shape these “foreign inclusions” will have.

When making this original material, sawdust is applied to the glue, distributed over the surface of the bottom layer of wallpaper, then covered with an outer sheet and pressed between the paper layers. Such wallpaper has a chaotic pattern, so it does not require adjustment, which allows you to use the entire roll with virtually no residue.

The advantage of this type of material is its ability to hide small imperfections in the walls very well. However, gluing such canvases is still much more difficult, since they differ from conventional options in being more massive. Therefore, to securely hold them on vertical wall surfaces, it is necessary to use glue with increased adhesive properties.

Paintable paper wallpaper from the Erfurt brand - the advantages of the material

The main supplier of paper wallpaper for painting to the Russian market is the German company Erfurt, which produces various options materials, both in terms of structural characteristics and their decorative qualities. Interestingly, the corporation’s “work experience” in this area has been more than 90 years.

The advantages of paper wallpaper from this manufacturer include the following qualities:

• Absolutely environmentally friendly materials, as they are made only from natural materials, and some options - with the addition of wood fibers or sawdust. The quality of this manufacturer's products is confirmed by the Blue Angel sign, issued to companies that produce exclusively environmentally friendly products. Due to the fact that the material does not contain any toxic or other harmful substances, it passes the strictest fungistatic and bacteriological control, it can be freely used to decorate the walls of premises where people live or are being treated, even with a very pronounced predisposition to allergic reactions.
• High resistance of materials to external influences- when pressing on the relief, it retains its shape, and the surface is difficult to scratch or damage by friction. Therefore, the material can be safely used for finishing walls in rooms with high levels of human traffic.
• Paper wallpaper is a “breathable” coating, as it has high vapor permeability and the ability to maintain optimal humidity in the atmosphere of the room. And this creates the most favorable microclimate for living and prevents the risk of mold formation. This quality makes it possible to use canvases for finishing rooms with high humidity, becoming great solution for bedrooms and children's rooms.
• The wallpaper is highly durable even when wet. Therefore, the finish will be durable even if water gets on it if it is used for bathroom walls.
• The materials, although they have a paper base, are low-flammable and self-extinguishing. They do not melt or fall off when burning, therefore they are certified both in Germany and in Russia as fireproof products.
• Erfurt paper wallpaper can withstand up to eight repaints.

The cost of high-quality Erfurt paper wallpaper for painting can range from 950 to 5,500 rubles per roll, depending on the specific type, length and width of the canvas in the roll.

Paintable fiberglass wallpaper

What kinds of fiberglass wallpapers are there?

One more is enough popular A type of wallpaper that can be painted is glass wallpaper. They are also called fiberglass or fiberglass.

Such wallpaper is made from fiberglass pulled from molten broken glass or quartz sand. The fibers are then collected into threads, from which certain types of fiberglass fabrics are woven. Other options for glass wallpaper are formed from glass fibers randomly laid and glued together.

In the production of this wallpaper, only natural high-quality raw materials are used, resulting in an environmentally friendly product that is highly durable. The composition of the material, in addition to quartz sand, includes soda, lime and dolomite, and modified starch is used as an adhesive composition or impregnation.

Do not confuse fiberglass wallpaper with technical fiberglass used for insulating pipes of heating mains, which is unsuitable for use as wall decoration. Fiberglass wallpapers have different technical material characteristics that are safe for use in residential premises.

Fiberglass wallpaper can be divided according to its texture into embossed and smooth.

• Embossed glass wallpaper can have patterns of different volume and complexity. The simplest of them reproduce various weaves ordinary fabrics, and they are made on almost the same looms and according to the same principle.

More complex options have plant reliefs on their surface, geometric shapes or ornaments that look like stucco. They are considered an elite material, and in certain cases are even made to order.

Unlike ordinary glass wallpaper, those intended for painting have a higher density and a more pronounced texture, which can be perfectly used for applying multi-colored finishes.

Fiberglass wallpaper goes on sale not only in white, but also in tinted form. Therefore, you can choose the option that is most suitable for the interior being designed, with the expectation that during the next renovation the walls can be “refreshed” with paint of the same or a different color.

• Smooth fiberglass wallpaper is intended for leveling and strengthening damaged wall surfaces - this material is called “painting fiberglass” or “cobweb”. These fabrics are glued if it is necessary to obtain an almost smooth surface with a barely noticeable relief of randomly intertwined fibers.

“Gossamer” perfectly masks small flaws in the form of drops or depressions, creating a durable surface that is quite resistant to mechanical stress. This type of wallpaper does not have the correct pattern, so it does not require adjustment when gluing, and is the most affordable of all fiberglass decorative materials.

Painting fiberglass can have different thicknesses, depending on its purpose. For example, for gluing the ceiling, the most thin version, and for walls where mechanical stress on the surface is possible - more dense and durable.

Why do you need painting fiberglass - “gossamer”?

This material makes it possible in many cases to greatly simplify labor-intensive finishing operations. For more detailed information about, its purpose, varieties, characteristics and gluing technology, read the special article on our portal.

Advantages and disadvantages of wallpaper for painting on a fiberglass basis

If we talk about the general characteristics of all glass wallpaper, we can highlight the following:

• The manufacturer has determined the service life of fiberglass wallpaper at 30 years or more, of course, with high-quality gluing.
• Fiberglass wallpaper can be repainted up to 20 times.
• Average material densities vary in the range of 110÷250 g/m².

Now a few words need to be said about the positive and negative qualities fiberglass wallpaper. To decide to purchase this rather expensive material, such information is necessary.

TO benefits Wallpaper made from fiberglass includes the following qualities:

• Fiberglass wallpaper is environmentally friendly clean materials, as they are made exclusively from natural raw materials. They do not release into the environment hazardous substances, and are also a “breathable” material, which minimizes the likelihood of mold or mildew appearing on the walls.
• High strength characteristics are one of the most important advantages finishing, since it is quite difficult to damage the surface of high-quality glass wallpaper. Therefore, they can be used to cover the hallway, children's room, kitchen and other rooms with high traffic intensity and with a high probability of accidental mechanical impact on the walls.
• Fiberglass is a non-flammable material, so they are used to cover premises of escape routes in case of fire danger in public buildings. Wallpaper is resistant to open flames, does not support combustion, and when heated does not emit toxic decomposition products.

• The moisture resistance of glass wallpaper makes it possible to use it for cladding bathroom walls.
• Fiberglass fabric does not attract or accumulate dust and is resistant to chemical substances, therefore they can be subjected to wet cleaning using household chemical solutions. In addition, high-quality wallpapers are hypoallergenic, which allows them to be used in any living space.
• The material is resistant to ultraviolet radiation, so it can be used to decorate rooms with windows facing sunny side. Fiberglass wallpaper does not lose its original qualities throughout the entire period of operation.

TO shortcomings fiberglass material includes the following qualities:

• High enough cost of wallpaper. However, judging by the abundance of clearly expressed advantages of this finish, their high price is completely justified.

• Gluing glass wallpaper requires a special glue, the price of which can significantly exceed the cost of regular wallpaper glue. And his consumption is also considerable.
• The difficulty of removing old fiberglass wallpaper from the walls if you want to change the decoration of the room. Due to the fact that the fibers are impregnated with modified starch, it, when combined with the adhesive mass and coloring composition, creates a high adhesive ability of the material and gives the surface high strength.
• When cutting and gluing wallpaper on walls, it is necessary to use personal protective equipment in the form of a respirator and rubber gloves. The fact is that when cutting sheets, microscopic particles of glass fibers are formed, which can cause irritation on the mucous membranes of the respiratory tract and on open areas skin. Once properly bonded, such emission of microscopic debris becomes impossible.

On Russian market glass wallpaper for painting are both domestic and foreign manufacturers. The most popular of them are the brands “Wellton”, “Oscar”, “Nortex”, “Optima”, “Vitrulan” and others. Wallpapers are presented in a wide range of external textures, relief designs, in various shades. Detailed Specifications can be found in online stores that sell similar products.

Video: the optimal choice of wallpaper for painting - fiberglass-based materials

Non-woven wallpaper for painting

What are non-woven wallpapers?

Another type of finishing material for painting is non-woven wallpaper. They are widely popular because they have a very affordable price and have a number of excellent performance qualities.

Non-woven fabric is non-woven material, made from cellulose fibers that have undergone special preparation, laid in several layers and pressed together. Non-woven fabric is a very durable material. Suffice it to say that tailors use it to strengthen and shape the sides and lapels of jackets and coats.

This group of wallpapers for painting can be divided into two types:

• Fully non-woven fabrics, where both the base and the decorative layer are one material.
• A combined option - the base is non-woven and the decorative surface is vinyl.

Non-woven wallpaper for painting is most often produced in white or yellowish color. However, other options that have the original tint are also available for sale. That is, the wallpaper is matched in color to the selected room design, and if it changes, or if the color is simply tired, the papered walls can be easily repainted.

Non-woven wallpaper can be divided according to the texture of its surface - into smooth and embossed canvases.

• Embossed non-woven wallpaper intended for painting usually does not have deep three-dimensional patterns. Most often this is an imitation of fabric weaving, decorative plaster, tree bark structure, snake skin texture, geometric designs and other.

This embossed version of the wallpaper allows you to diversify the use of paint. That Yes, can be painted not the entire relief in one color, but apply one or two shades, visually increasing the volume of the pattern.

• The smooth type of wallpaper is called repair or painting interlining - this is a thin single-layer fabric made of cellulose fibers. This material is divided according to its density, which can vary from 65 to 160 g/m². The masking quality of the material depends on this parameter, so the higher the density of the canvas, the more more possibilities mask small surface imperfections.

This version of wallpaper is easy to paste and paint, and you can repaint it up to 10 times. However, if embossed wallpaper can hide quite serious flaws in the wall, as well as its color, then the repair canvases are almost translucent, and the surface of the base will be clearly visible through them, so it will have to be well prepared before gluing them. This quality, by the way, is skillfully used by some experienced craftsmen to create a unique “internally tinted backlight” effect.

Well-prepared walls covered with this material and then painted with the chosen paint look quite impressive. In addition, we note that such gluing is perfect for leveling walls for further artistic painting or for creating a panel.

• Combined wallpaper, in which a vinyl decorative layer is applied to a non-woven base, is distinguished by a very wide variety of textured patterns.

The relief of this type of wallpaper often also allows for multi-color painting and giving it a 3D effect. True, to carry out such finishing you must have certain artistic skills.

This variety also has a significant “minus”. If the interlining is vapor permeable material, then vinyl no longer possesses this quality. And this, in turn, means that the overall vapor permeability is significantly reduced. This circumstance can lead to the creation on the walls of a favorable environment for the appearance of mold, which will quickly destroy the finish.

In addition, the vinyl layer is not resistant to mechanical stress even after painting. Therefore, it is not recommended to stick such wallpaper in rooms with high traffic intensity or if playful pets live in the apartment or house, which can “test the strength of the finish” with their claws.

Advantages and disadvantages of non-woven wallpaper for painting

It makes sense to consider the “pros” and “cons” of non-woven fabrics for painting, since you need to know what can be expected from them when gluing and during operation.

Disadvantages This type of wall covering can be called the following:

• Wallpaper is enough heavy, therefore, when gluing walls using wide rolls (more than 1000 mm), it is often very difficult to do without an assistant.
• Non-woven fabric has a distinctly porous structure, so it loses some of its qualities after the second or third dyeing.
• Wallpaper does not accumulate dust in its structure, but it is well attracted to the surface of the relief.

Non-woven wallpaper is most often left for painting sold in rolls, having a width of 530 or 1060 mm, and a length of 10.06 and 25 m. However, other options are quite possible. The cost of the material varies in a very wide range, from 790 to 3500 rubles - it depends on the manufacturer, quality, specific collection, roll size parameters, etc.

Both domestic and foreign manufacturers present their products on the Russian market - these are the companies "Marburg" and "Rasch" (Germany), "ART", "Loymina" "Elysium" and "Palitra" (Russia), "Estro" (Italy ) and many others.

A very special variety - linkrust type wallpaper

What it is?

Linkrust-type wallpapers are canvases with a pronounced decorative, most often floral, relief that imitates the stucco molding that previously decorated walls and ceilings. With the advent of simpler finishing options, stucco, due to the complexity of its creation, was gradually “pushed to the sidelines.” But with the advent of linkrust wallpaper, this trend was given a “second wind”.

Stucco is traditionally used in classic interior and gives the room a luxurious appearance. Therefore, in recent years, interest in linkrust wallpaper has returned, and they are increasingly used in interior design.

This type of material is made exclusively from environmentally friendly raw materials, and all manufacturers adhere to the classical technology of manufacturing canvases.

The basis for linkrust wallpaper is thick paper, and the three-dimensional pattern, which is the decorative outer layer, is created from a mixture of wood flour, rosin, wax, chalk, linseed oil and other natural ingredients. The mass made from the indicated components is applied to the prepared paper base, and then the canvases are rolled with stamp rollers with a certain relief. The next step is cutting the blades according to standard sizes, after which the material is sent for drying, the duration of which can be up to two months.

Thanks to the peculiarities of raw materials and manufacturing technology, the canvases acquire high strength, and after gluing them to the wall, this quality only increases over time. Therefore, the durability of such finishing material is quite great. For example, many English houses still use trim that was glued to the walls more than a hundred years ago.

With the right choice of paint and its proper application to the relief surface, this process can be carried out countless times. Thus, the appearance of the room, thanks to changing the color of the relief details, can be changed to suit the new design.

As a rule, all the walls of the room are not completely covered with this wallpaper. They are usually used as a decorative panel, placed in separate areas, or placed in the form of a wide border framing the decoration with other materials.

Classic linkrust wallpaper initially has a light beige color, which does not change the shades of the paint applied on top. However, today wallpaper is also produced in tinted versions, which do not require initial decoration. If desired, they can be repainted even after several years.

Advantages and disadvantages of linkrust wallpaper

Like other finishing materials, linkrusta wallpaper has its positive and negative qualities, which you need to know about if the question arises about purchasing such a finish.

TO positive aspects This material includes the following:

• Environmentally friendly canvases - thanks to the use of exclusively natural raw materials.
• Flaxseed oil, which is part of the decorative layer, acts as a natural antiseptic that prevents the appearance and development of mold.
• The ability to “breathe” also contributes to the durability of the finish and eliminates the risk of biological formations harmful to both the material and humans.
• Durability, proven over decades of use of the finish.
• Resistance to mechanical damage, as well as to deformation during shrinkage of the structure or to the appearance of cracks on the walls.
• The moisture resistance of the canvases allows them to be used for finishing bathrooms.
• Easy care of the finished surface. You can carefully vacuum it or remove the dust first with a dry and then a damp soft cloth.
• The ability to radically change the appearance of the interior using coloring. Moreover, paint can be applied using several different techniques.
• Linkrusta wallpaper can be used to decorate not only walls, but also ceilings and even furniture.

Disadvantages linkrust can be considered some points that encourage many owners of houses or apartments to refuse to use this wallpaper in interiors:

• High cost of material. Thus, the price for rolls measuring 533 × 10000 mm can reach up to 19–20 thousand rubles. And for curbs with a width of 268, 275, 282, 270 and a length of 10,000 mm - up to 14 thousand.
• High cost of installation and painting of the decorated surface.
• The high complexity of gluing the material to walls and ceilings and its further decoration. It is extremely difficult to achieve high-quality results on your own without experience. And this predetermines the high cost of such finishing work performed by professionals.
• Linkrust instability to low temperatures. When subjected to strong cooling, the material becomes brittle and easily damaged even without the strongest mechanical impact.

On the Russian market, linkrust wallpaper is presented by English manufacturers, who guarantee the quality and durability of the material. Canvases can be ordered online or purchased in specialized stores in large cities.

What compositions are used to paint wallpaper?

A few words must be said about paint and varnish products, which can be used to decorate wallpaper intended for painting. The fact is that if you use the type of paint that is not suitable for such work, you can ruin the expensive finishing material or, “if you’re lucky,” you simply won’t get the desired effect.

For all types of wallpaper, light water-based paints are used - these can be water-dispersion or water-emulsion suspensions. Today, the construction market offers a very wide range of such compositions on polyvinyl acetate, acrylic or silicone bases. Water-soluble compounds do not contain complex organic aggressive compounds that can not only negatively affect the material being painted, but also emit toxic fumes harmful to human health.

It is best to use waterproof suspensions after final drying, which allow wet cleaning of surfaces without damaging the aesthetics of the finish or reducing its durability.

Most often, a white base paint is purchased, and one or more colors are purchased for it, which will help achieve the desired color or shade. If you choose this tinting option, you must knead immediately required amount paint of the chosen color, since if there is not enough paint for the entire surface, it is unlikely to be possible to create exactly the same tone.

Alkyd or alkyd wallpapers are not used for painting wallpaper. oil paints, which have a viscous, dense structure and a sharp, unpleasant odor, which indicates the presence of organic solvents in their composition. These types of paints and varnishes form a rather thick layer on the surface, covering the natural structure of the wallpaper, reducing its decorative effect and impairing its ability to “breathe”.

It is recommended that when purchasing wallpaper and compositions for coloring it, create at least a rough sketch of their decoration. Moreover, it's better to make several possible options. Such a “draft” will help not only compare and choose the best one, but also avoid making mistakes when applying paint.

Important information about waterborne finishing paints

In order to achieve a positive result in the final painting of pasted surfaces, it is necessary to know at least in general terms the characteristics of the compositions used for this purpose. detailed information is contained in a special publication on our portal.

*******

Now, having received information about the types of wallpaper for painting, you can decide on their choice, which will directly depend on financial capabilities, the desired effect and methods of final decoration. The most affordable option, both in terms of cost and work, is non-woven or combined (non-woven and vinyl) wallpaper. They are easy to glue and you can paint them yourself using a regular paint roller.

Remains unclear question– how much wallpaper will you need to purchase to cover a particular room with it? Therefore, as promised, we are posting an appendix to the article, in which we will touch on this problem in more detail.

APPENDIX: How much wallpaper should I purchase per room?

First - an online calculator, and below - the necessary explanations and recommendations for carrying out calculations.