How to remove scratches from plastic items. How to remove scratches on plastic windows? How to polish a plastic window sill

Everyone has a lot of plastic things in their apartment, often for daily use. For example, this could be a refrigerator, kettles, blenders and other items household appliances, phone housing, and car showrooms. Due to the fact that these things are used quite often, scratches, sometimes deep, appear on the plastic from prolonged use. However, no need to worry, there are some tips on how to remove scratches from plastic effectively and affordably.

Today you can find a large number of products that will help eliminate scratches and microcracks on the surface of objects made of plastic. The most common means are considered to be polish, which removes damaged areas on plastic; special pencil; crack filling paste. However, they only work when the scratches are not deep.

You can fix small cracks yourself using polishes designed for car body treatment.

The polish can be coarse (that is, its texture has an abrasive property), as well as finishing (in this case, the texture is quite soft and silicone). It is best to choose only a finishing polish for household plastic items, so as not to cause even more damage to the coating that you want to restore.

How to remove scratches in a car interior? You can fix scratches on the plastic inside your car yourself. The choice of tools depends on the degree of damage and type of coating, including a hair dryer, polish, pencil, and if none of the proposed options helps, then major renovation

details.

Hairdryer

1. You can perform the following steps using either an ordinary hair dryer, which is used to dry your hair, or a construction hair dryer. During this procedure, the plastic will heat up, and the damage will heal on its own, due to the fact that it will melt somewhat.
2. Before starting work, wash the part well with detergent. When it dries, you should turn on the hair dryer (it is recommended to use minimum power) and then point it at problem area
3. If you do not notice that any changes have occurred, increase the power so that under the influence of temperature, the plastic surface melts a little.
4. Never keep the tool in one place because you risk overheating the plastic.

Note! You can touch the restored part with your hands only after it has completely cooled down.

Polishing

1. You need to wear rubber gloves and wash everything with detergent. Places where dirt and dust have accumulated require special attention.
2. Then you need to dry the area you are interested in.
3. Next, you need to apply a paste with abrasive properties to the microcracks using a small foam sponge. Be careful! For better effect of the polish, wait a little time, as is usually indicated in the instructions for use.
4. Wait until the polish becomes white, and begin the polishing procedure.
5. Moving in a circle, it is necessary to clean off excess abrasive, from time to time removing the resulting amount of dust.
6. After this, wash the coating.

Masking pencils

This method is the fastest and easiest to eliminate cracks inside the car, as well as those that can be found on the bumper of the car. Pencil High Quality usually has a high cost, but it is quite economical and effective remedy. In order to carry out the procedure, you need to perform the following steps:

1. Clean problem areas from dirt and dry.
2. Use the point of a pencil to fill in the damage.
3. Wait for the surface to dry.
4. You can then remove any remaining product and begin polishing. This should smooth out the transitions between the restored area and the rest of the coating.

Major interior repairs

Painting is the most complex and time-consuming method of restoring such surfaces. However, this option will definitely be effective and will help hide existing shortcomings.

1. The element requiring restoration must be washed thoroughly and dirt removed using detergents.
2. Next, you must sand the damaged area, however, if the panel is embossed in its structure, then this step should be skipped.
3. If it is smooth, you can start sanding using special equipment or improvised means (sandpaper is often used).
4. Then a special primer is applied to the prepared coating, which is produced in the form of spray cans. It is necessary to select a composition that will not react with the surface.
5. Once you have applied several layers of primer, the plastic needs to be polished using an abrasive until it is perfectly smooth.
6. If there are large cracks in the panels, you need to fill them with putty.
7. When you're done renovation work, the coating should be coated with appropriate paint.
8. If necessary, plastic panels They can also be treated with varnish, but this can cause glare, which sometimes makes it difficult to control the car.

Cracks small size are removed using the following means:

• Abrasive polishes glass surfaces. Such products are also often used by artists, and they are the only way eliminating all scratches rather than masking them. Among the ingredients included in such abrasives you can find hydrofluoric acid, so under no circumstances use them on parts that are not made of plastic.
• Glass cleaning products. If you want to remove a scratch on a plastic item, use a glass cleaning product, such as that found in a car. It should be applied to the coating and polished using dry wipes. This option will help get rid of small cracks.
• Wax. Wax is suitable for effective polishing of plastic surfaces. It is enough to apply a little product on a dry piece soft fabric and rub the plastic, moving in a circle. Remove excess with dry wipes or a cotton swab.
• In addition, a polish intended for processing is sometimes used wooden products, mixed with Vaseline. You need to buy products used for polishing wood at the appropriate point of sale and treat them with it problem area by mixing the product with a few drops of Vaseline. This product fills the damaged area and makes it less noticeable. Polishing must be continued until the Vaseline is completely wiped off.
• Also, you can use the funds for computer equipment, which is most often used to treat discs, because in this way worn areas and small microcracks can be removed. Apply the product to the plastic coating using a soft fiber.
• Polishes for silver and copper will help you, which should be applied to the problem area and wiped with dry wipes or a piece of fiber cloth. This process should continue until you get rid of all the cracks.

Plastic in modern world surrounds us everywhere, be it car panels, window sills, sunglasses or mobile phone. The spread is due to the fact that it has light weight and easy to use. Nevertheless, it is susceptible to damage, so sooner or later the question arises of how to remove scratches from plastic on this or that thing.

Most often, damage can appear on car parts, for example, the dashboard or doors, this may be due to the careless placement of keys, phones and other objects on it. It's also quite easy to scratch glasses that have a plastic base when they are carelessly placed on a table or in a bag.

How to remove scratches from glossy plastic at home

To remove scratches on plastic, use one of the following express methods:

• Apply to damaged surface a few drops of machine oil, then thoroughly polish it with a flannel cloth. It is worth noting that the plastic should not be painted, otherwise this type of polishing is unlikely to give significant results.
• An indispensable product in every household is GOI paste; it can also help in solving this problem. It is enough to apply it to the fabric and thoroughly rub the substance and the plastic base.

GOI paste copes with almost all scratches on plastic surfaces.

• Good results are obtained by using special felt-tip pens that can mask a scratch on a painted surface; in addition, you can use textile paint for this purpose. Finally, the damaged area must be treated with a paste containing wax.
• Hardware stores have a special dye that removes scratches on glossy surfaces. It is applied to Right place using a thin brush or toothpick, and after drying, polish with a cloth soaked in machine oil.

If you cannot remove the scratch, try other methods:

Heating with a hairdryer. Quite a simple solution to the problem, hot air quickly levels the plastic surface and eliminates even the smallest defects. Removing scratches occurs as follows:

• remove debris and dirt from the part of the plastic being processed;
• clean using sandpaper with a not too coarse mesh;
• remove dust with a damp cloth and degrease the surface;
• then heat the plastic by pointing the hairdryer turned on at it to a temperature of 300 degrees;
• it is important to move the device in the direction of the scratch, without staying in one place, to prevent streaks from appearing;
• when the surface heats up, leave it alone for 15–20 minutes;
• Finally, priming and painting of the plastic element is required.

Polish using a special product that can be purchased at an automotive supply store.

• First, clean the areas where the scratch is located using a soapy solution.
• Dry the element.
• Apply the paste using a sponge and leave to act for the period specified in the attached instructions.
• After waiting for the paste to become light shade, proceed directly to polishing. Permitted to use as special device, and ordinary sandpaper;
• After shaking off the dust from the surface, evaluate the result of the work.

Pencils used to paint over scratches on a plastic surface can fill in the damage and make them invisible to the eye:

• first carefully select the shade of the pencil so that the scratch becomes truly invisible;
• then wash the plastic and dry it;
• Now shade the scratch with a pencil, and after drying, remove the excess and polish the surface.

How to remove deep scratches on plastic

To remove deep scratches on plastic that completely spoil the appearance of any thing:

• melt small element plastic, which will be exactly the same as the area being repaired;
• dissolve it in White Spirit;
• now that the substance has taken liquid form, rub it into the crack;
• Finally, polish the surface.

Special products hide deep scratches.

Large damages on the plastic base can be removed by applying special remedy Displex, which is sold in hardware stores, packaged in tubes.

It is worth noting that this substance contains microparticles of a plastic nature, so they most accurately fill deep scratches and make them invisible to others.

• This tool should be used as follows: apply the paste to the scratch using cotton pad
• , flannel or other fabric;
• rub the product in, making circular movements, for 2 minutes;

If the scratch does not disappear after one procedure, repeat the manipulations several more times.

As a rule, Displex copes well with deep damage, but in the case when all influences are ineffective, it makes sense to turn to specialists. For example, if the scratch is inside the car, use a special damage removal service that most car washes offer.

How to remove scratches on a plastic window sill

A plastic window sill, of course, is in many ways superior to its wooden counterparts, but scratching it is easier than ever. There are often cases when damage is caused by awkwardly moving flower pot or a housewife who cleans it using a stiff-bristled brush. It is worth noting that scratches can become a source of additional dirt that gets into them, and removing it will not be too easy.

Of course, ideal option The window sill will be completely replaced with a new one. But if this method does not work, try to remove the damage yourself:

Using sandpaper, you can remove all the unevenness from the windowsill.

• if processing is expected minor scratches, then you can immediately apply this product to them;
• in cases where deep damage requires removal, their surface must first be cleaned with sandpaper.

It is worth noting that wax coating gives excellent results because it tolerates sunlight and water well. It also has the ability to repel dirt, protecting the surface of the window sill.

How to remove scratches from clear plastic

Transparent plastic is no less susceptible to scratches than matte or colored plastic. As a rule, there may be many objects in the house that have a surface made of such plastic. Scratch quite often plastic glasses glasses, most often sunglasses. It should be noted that such damage can impair vision and simply make their use uncomfortable.

Small scratches on transparent plastic can be removed using available means:

• Polish for jewelry. Apply to glass and then polish with a microfiber cloth.
• Mixing Vaseline and wood polish can remove scratches from clear surfaces. It is important to continue polishing until all traces of Vaseline have disappeared.
• A paste that removes scratches from computer disks works well; it is applied to the surface of glasses using a microfiber cloth.
• Glass cleaner and glass abrasives do a good job of dealing with this kind of damage. In addition, they will perfectly help solve the problem of fogging.

Removing scratches from plastic surfaces is a task that every person faces sooner or later, because objects made from this material fill every home and surrounding area. It is worth emphasizing that removing minor damage is quite possible at home, and deeper damage is best removed using professional products or help from specialists.

High-quality plastic windows are made from PVC, which, in addition to its protective properties, also has high resistance to mechanical and other damage. But even this does not help to completely avoid damage to the plastic profile and window sill. It also happens that the plastic is damaged during transportation or unsuccessful installation, but you did not immediately notice this problem.

Quite often, scratches on the profile and window sill appear during operation, due to the carelessness of the owners, the activity and curiosity of small children, as well as due to pets. Shallow scratches on the white surface of the plastic are not very noticeable, but still cause an unpleasant sensation and a desire to remove them. There are several proven ways to deal with scratches.

Scratch removal methods

Experts say that most effective method removing deep scratches from the plastic surface of the profile is to use a solvent and further grind the surface. The essence of the method is that the profile is treated with a solvent, which “corrodes” the plastic and removes the scratch groove. Then, using a damp cloth, remove the solvent and grind the profile.

Another effective method removing scratches from plastic profile – the use of liquid plastic, which literally creates a new surface. The use of liquid plastic is complicated by the fact that it is necessary to accurately select the required consistency and very carefully apply the composition to the surface of the plastic profile.

In particularly severe cases of damage, use a primer with further coloring.
Cracks and chips on a plastic window require urgent removal measures, because such defects can increase over time and it will become impossible to eliminate them. “Liquid plastic” is suitable for removing cracks and chips.

Methods for repairing a plastic window sill

The above methods for removing scratches can also be used for a plastic window sill. But if there is a lot of damage, then the surface area of ​​the window sill allows you to use other methods to make your window sill beautiful again.

Repair using special pads. This method is an alternative to replacing the old window sill with a new one. This is very convenient, because after dismantling the old window sill and installing a new one, it is necessary to repair the slopes and partially glue the wallpaper around the window, and in the case of using overlays, these measures will not be necessary. Using window sill covers is a fairly cheap option.

Special overlays will be made window design unique and a wide range of color scheme will allow you to choose the ideal option for you. The surface of the pads is resistant to ultraviolet radiation, easy to clean and durable. The trim is attached to the window sill using a special mounting adhesive, which is applied to the entire surface of the window sill in an even layer. After the glue has dried, the trim and the window sill are a single whole.

Restoration of a window sill using laminated film. The range of laminating films is very large, there is a wide range of colors: plain, various colors, imitation wood texture or natural stone. Before applying the laminating film, it is necessary to carefully prepare the surface. All scratches and gouges must be filled with putty, and bulges must be sanded. The surface must be perfectly flat. It is also necessary to degrease the window sill for better adhesion of the film. Most affordable way degreasing the window sill is using a regular detergent.
Cutting out the film under required size, Be sure to allow 3cm allowances at the edges. In the corners and hard to reach places use a hairdryer to heat the film, it becomes more elastic, and you can special effort stick it on. If bubbles form after gluing, you need to pierce them with a needle and release all the air.

Window sill repair using special putty

Today there are special putties on sale for sealing various cracks, chips and scratches from the surface of a plastic window sill. The putty is produced as a solvent or powder filler, that is, it requires additional preparation at the place of work. As a rule, putty is sold complete with a measuring cup and a special wooden spoon, which allows you to follow the dosage specified in the instructions as accurately as possible.

Before starting work, the surface of the window sill is prepared: dirt is removed, degreased and allowed to dry. It is very important to strictly follow all the recommendations specified in the instructions. The applied layer dries quite quickly; after 15 minutes the window sill is ready.

But with prolonged and improper use of window sills, the most different surfaces, this part of the window may require restoration. And we don’t always know how to update and what to repair plastic window sill, if cracks and chips appear, not to mention discoloration and deformation.

When is restoration necessary?

Plastic is relative practical material. Elements made from it are easy to maintain, easy to install, have a wide range of colors and are low in price. But at the same time they are susceptible to mechanical damage and are sensitive to elevated temperatures(swell and may crack).

What to do if the following appears on the windowsill:

1. Chips, cracks and scratches.
2. Traces from flower pots and hot items.
3. Faded by exposure sun rays spots.
4. Damage chemicals for cleaning surfaces.

The plastic surface of the window sill is subject to mechanical damage

In this case, repairs of plastic window sills are carried out depending on the degree of damage. There are special restorative agents for these purposes. If these are minor damages, the repair is done using putty; for multiple chips and cracks, a laminated film is used, and for serious problems, a special overlay is used.

Ways to solve the problem

Let's break down the options for restoring PVC window sills into categories depending on the use of the material used.

Important! Before you repair a plastic window sill with your own hands, the surface must be cleaned of dirt, degreased with alcohol and dried.

Chemical cleaners

It is known that plastic surfaces windows and window sills are covered with an invisible or decorative film that performs a protective function. If handled carelessly, it will become scuffed and yellowed. To eliminate such minor defects, you can completely restore the part using laminate wax or a special solvent-based Cosmofen cleaner.

Small stains and abrasions can be removed with a special cleaner Cosmofen

If the window sill is completely yellowed, it is better to apply the composition to its entire surface. It will dissolve the top yellowed layer and the plastic will become as good as new. This will complete the restoration of the window sill.

Special putty

The use of a specialized mixture such as Fenoplast or Reparaturset to seal small defects is a very popular method today. In stores it is sold in powder form complete with a spatula and measuring cup. It will not be possible to prepare the putty according to the instructions. special labor. After use, this mixture acquires properties close to PVC and easily covers gaps, be it a crack or a scratch. Experienced specialists for diluting a two-component mixture do not use water, but a primer for deeper penetration, which helps to obtain sufficient durable coating.

You can use putty to repair small scratches and cracks.

Immediately after preparing the composition you should:

1. Apply putty to the surface.
2. Carefully repair the scratch and smooth it out.
3. Wait 10-15 minutes. until completely dry.
4. Sand with sandpaper.
5. Polish with Fenosol S5 “UVA”.

To understand what it will look like to repair a plastic window sill with your own hands using putty, you need to start with more inconspicuous places.

Liquid plastic

If you don't know how to remove scratches from a plastic window sill, use liquid plastic. This material is absolutely indispensable for repairing deep scratches and large dents. It allows you to restore even the most advanced deformation.

To correct deep defects in the window sill, liquid plastic is used

Already ready-made composition type Cosmofen Plus seal all the recesses on the plastic window sill until flat surface. After this, you need to see how the cracks being repaired and the patch will differ from the overall texture of the plate. Therefore, it can additionally be covered with self-adhesive decorative film.

Laminated Film

It's pretty simple and affordable option for restoration of the surface of plastic windows with numerous defects. Big variety color range and the choice of assortment to imitate a variety of textures (wood, stone, Russian pattern, etc.) make this product very popular even when restoration of the plastic window sill is not required.

Laminated film can be used to update old window sill

To use the film you should:

1. Apply putty mixture.
2. Use sandpaper to remove any bulges.
3. Cut film the right size with a margin of 2-3 cm at the edges.
4. Gently spread it over the surface with a towel.
5. Remove any air bubbles that have formed by piercing them with a needle and level the surface.
6. Glue the film in hard-to-reach places using a hairdryer, which will make it more elastic.

The easiest way to do the work is with two people, when one holds the edge of the glued film, and the other removes its inner layer.

Important! Before repairing window sills, it is better to disconnect this element from the window. This will allow you to deal with the problem more quickly and efficiently.

PVC lining

Repairing a window sill using a special overlay is suitable for elements no more than 6 cm thick. This is a fairly economical and completely simple method in terms of labor costs, when you can simply close the problematic part. For example, when an element might swell or become severely cracked. The PVC window sill cover is made of pure polyvinyl chloride, which is durable and resistant to moisture and ultraviolet radiation, and allows you to get an updated interior in a matter of hours.

To install it you need:

1. Fill large damage with glue.
2. Cut the trim to fit the size of the window sill.
3. Degrease the surface and coat with glue.
4. Place the trim on the window sill and press down with a weight.
5. Leave until completely dry for 5-6 hours.
6. Fill the voids between the window sill and the trim silicone sealant.
7. Place the end caps on the glue.

After the plastic covers on the window sills are glued, the protective film is removed. White plastic linings are considered the least problematic. After gluing to the old window sill, the edge of the plate is heated with a hair dryer and bent to its shape.

The plastic cover allows repairs to be carried out in short terms

Important! Heat treatment cannot be applied to laminated and glossy overlays, as they immediately lose their attractive appearance.

Removing the plate

If all of the above restoration methods window sills do not fit or the plastic is very swollen, and you no longer know how to seal the plastic window sill, you can try to radically get rid of the problem by complete replacement details.

Dismantling the element requires some effort:

1. Cut off the mounting foam and carefully pull the element towards you, holding the slopes.
2. We remove the vacated space from garbage.
3. We place the new plate according to the dimensions of the old window sill.
4. We supply support rails.
5. Lubricate the side of the connection between the plate and the window with silicone sealant.
6. Install new window sill into the connector, checking it with a level.
7. Filling the voids polyurethane foam, and place a weight on top of the part.
8. Filming protective film after the foam has dried.

Important! Before giving preference to PVC windows, you should pay attention to the fact that some companies provide a guarantee for replacing the window sill if it is damaged.

If the window sill is severely damaged, it is recommended to replace it

PVC installation window sill is not such a complicated process, but it requires attention and perseverance. If you choose between replacing a plastic window sill and restoring it, then the second option is, of course, more attractive in terms of saving money, lack of waste and variety color palette. And if you use a plastic cover, then the list of materials from which the window sill can be made is not limited to plastic. It can be concrete, wood, brick and metal.

It turns out that dismantling and restoration of window sills with your own hands generally depends on the deformation of structures, the presence Money and free time. And for this interior detail to serve long years, you should use it for its intended purpose and properly care for the plastic texture using products specifically intended for it.

Compared to conventional wooden windows plastic ones have some advantages. This includes thermal protection, high noise insulation, and low costs for content. Yes, and if you compare them only by appearance, then unlike wooden ones, plastic windows have a more stylish look. Everyone has their pros and cons. The same goes for plastic windows, which still have certain disadvantages (read the article about the dangers of plastic windows). One of these disadvantages is the difficulty, and sometimes the impossibility, of removing scratches from them.

In order to remove scratches on plastic windows, you will need:

- flannel;

Wooden block;

Liquid plastic (for example, Cosmofen);

Marker for plastic windows;

Solvent 646.

How to remove scratches on plastic windows?

1. Wash the surface to be treated thoroughly with a wet sponge. Do not wet the sponge detergents, since they can destroy the structure of the plastic. Afterwards, wipe the window thoroughly and dry. Wear gloves. Use a soft cloth (such as flannel) to remove small, shallow scratches. To do this, you need to make a homemade roller for grinding. Take it wooden block, having a length of 15 cm. Attach several layers of fabric to the block or make a cotton layer - these actions must be performed so as not to further harm the plastic window in the future. Next, attach a piece of soft fabric to the resulting base. Take the homemade roller you have and sand the scratch on the window.

2. Take liquid plastic and use it to remove larger and deeper scratches on the glass. Liquid plastic (for example, Cosmofen) can be purchased from organizations that sell components for plastic windows. Since the solution contains acetone, you should be careful with it. You should take a piece of coarse cloth, apply a little liquid plastic to it and wipe the surface of the window in a circular motion. You do these movements until the desired result is obtained (until you get rid of scratches). Then wipe the plastic with a dry and clean cloth. Rags and fabrics used in work must be disposed of later.

3. Deep scratches can be removed using solvent 646. Take a piece of cotton wool and a damp cloth. Lightly moisten the swab with solvent. Rub the scratch with light movements. To prevent the solvent from corroding the plastic more than required, you need to slightly dissolve the plastic and immediately wipe it with a damp cloth. Repeat these steps until you get results. That is, constantly dissolve the plastic and immediately wipe with a damp cloth. Before you start using this strong solvent on a plastic window, first practice on ordinary glass plastic to understand how it all works.

4. Using a special marker, which can be purchased from organizations that sell components for plastic windows. Using a special marker, remove scratches from the laminated window (where the wood-effect film is glued). Clean the surface of the window and in one motion paint over the scratch along its entire length.