Are you going to buy new Christmas balls for your Christmas tree? Wait! Balloons from the store will not go anywhere, but you can make them yourself New Year decorations it will be much more interesting :) In addition, you can involve children in this activity. In this case, you will get not only a master class on making DIY Christmas balls, but also a lesson in environmental awareness :) After all, plastic bottles are practically indestructible garbage that accumulates exponentially. And so your bottle will serve you faithfully more than once :)
New Year's crafts from plastic bottles will cost you practically nothing, will be made with love, will not be formulaic, but one of a kind. In addition, they are absolutely safe, which is important if there is small child. It’s very easy to make beautiful and original Christmas tree balls with your own hands from an unnecessary plastic bottle. Judge for yourself.
DIY Christmas balls from a plastic bottle
To make a simple New Year's craft from plastic bottles we will need:
- – an empty plastic bottle, preferably a transparent one white plastic;
- – acrylic paint(V in this case red and white);
- – nail polish with glitter
- - glue
- - scissors
We take the bottle and cut off the neck and bottom from it.
Then we cut the middle part into rings 0.8-1 cm wide. It is advisable not to crumple the rings so that the ball turns out perfectly round, without “scars”.
Glue the resulting rings together. For plastic, it is better to use transparent glue such as Moment-Crystal, or special glue for needlework. Take one ring and apply a small amount of glue in two places - top and bottom. Then carefully insert one ring into the other so that they are perpendicular to each other.
We hold the product with our hands a little so that the shape does not change, and let the ball blank dry. Then you need to glue two more rings in the same way to make a ball.
When the glue dries, we begin to paint our New Year's ball with paint.
The next stage will be decorating our future New Year's ball. To do this, apply a random design with white paint, and then, to add a New Year’s mood, cover the entire product with glitter nail polish.
So that the ball can be hung on the Christmas tree, carefully use a needle to thread the thread in the place where the rings were glued together, directly under one of the rings - the top one.
You can also use tape for this, but you will need to thread it in advance, even at the moment of gluing the rings. But it will look more original.
That's all, the New Year's ball from a plastic bottle is ready. All that's left is to hang it on the Christmas tree :)
Sometimes you want to quickly make some kind of craft for your local area. To please the children or improve your mood. If you don’t want to bother with the long process of cutting out feathers for or leaves for, then make balls from plastic bottles that will become a spectacular decoration for your yard. They may be different types, so consider all the options and choose the one that suits you best.
Master class: balls from plastic bottles
Option 1
This ball can be made in several ways. The first one is the simplest, if you have a wooden blank in the shape of a ball. Well, or you know how to use a wood lathe, and also found a large deck. Then all that remains is to prepare all the collected containers. To make a ball, you need to attach it with self-tapping screws to wooden blank all covers, leaving small gaps between them. After completing this stage, all that remains is to screw all the bottles to the caps. To get the balls various colors, either select bottles in matching colors or paint them before attaching them to the wood piece.
The second method is for those who do not know how to handle wood, but found an old ball in the house. It is necessary to cover the ball with newspaper sheets. After the layer becomes very dense, you need to paint it in the chosen color (golden or silver look elegant). Then glue the bottle cap to the surface of the base ball. Some people put her on double sided tape, however, superglue or plastic glue will be more reliable and practical. You can glue the entire bottle at once to more accurately determine the required gaps between the components of the product.
Balls can be made not only in one color, but also using the mosaic technique. Just use the same bottles, both in shape and size. This structure can be placed on a metal rod, suspended, or simply placed on the ground.
Option 2
You can decorate the veranda of your home with these balls so that on summer evenings you can admire how the light wind sways them. With certain skills, such balls are made from plastic bottles very quickly.
To make a small product, you will need 12-20 plastic bottles. The larger the ball, the more containers you will have to collect. Only the bottoms of the containers are used. Therefore, it is necessary to use a sharp stationery knife and scissors to cut out each one so that you get flowers. In each petal you need to make two symmetrical holes with a hot awl. It is better to start collecting after completing all the workpieces. Now prepare the fishing line that you will use to fasten the petals (this is much more convenient than using a furniture stapler).
Option 3
There is another way to make a ball from plastic bottles that will decorate local area. First, the bottoms are cut off from all prepared identical containers. If necessary, they are painted with acrylic paints. Next, a thick cement solution is mixed, which must be shaped into a ball. Because this product is street decoration, then it can be any size. After the cement ball is formed, it is necessary to quickly press the bottoms over the entire surface until the cement hardens.
These balls made from plastic bottles can decorate the veranda and garden, local area and front garden. Good luck and creative inspiration!
Svetlana Nedilko
Very beautiful balls, you can make them from DIY plastic bottles. With these balls you can decorate an outdoor gazebo, and even rain is not a problem for such balls, they will always be bright and beautiful.
For work we need:
1. Bottoms bottles(12 pcs.).
3. Scissors.
5. Foil or tinsel for decoration.
For one ball, we need to select plastic bottles 12 pieces of one color and volume. Cutting out the bottom bottles that resemble flowers.
We take one bottom for the center, and we will attach the remaining five to it with fishing line, having first made two holes with an awl. In the first stages of my work, I decided to use a stapler. It worked.
We make the second half of the ball in the same way as the first.
Then we fasten them together with a stapler. And at the end
It is best and most convenient to fasten the petals together with fishing line. To do this, we make two holes in the petals with an awl.
Before decorating our ball, we make a loop for it from fishing line or braid so that it can be hung.
You can put foil in the middle of the ball.
In my work, I used small balls of tinsel for decoration.
So it’s ready, the ball is both light and beautiful.
I hope mine master- the class will be not only interesting for you, but also useful.
I wish you all creative success. Thank you for your attention!
Publications on the topic:
New Year- the fulfillment of your most cherished desires, both adults and children are waiting for magic! Even the smallest fake can be made together.
"New Year's Ball" Dear teachers and parents! The long-awaited holiday is coming soon. New Year! Waiting for fairy tales and miracles! To create a festive one.
Everyone knows how beneficial it is to walk barefoot on the ground and grass. This achieves a foot massage, which is very useful, as it stimulates the flow.
Developing subject-specific spatial environment - part of the educational environment, presented specially organized space(premises,.
Master class on making a tea set from plastic bottles. Educator: Mansurova Ekaterina Serikovna 1. We will need: one.
Rooster made from plastic bottles. Master class Good evening, dear colleagues! This summer, during renovations at the preschool educational institution, I, as an additional teacher.
I bring to your attention a master class on making the “Hare”. Material: 1. One five-liter bottle 2. One 1.5 bottle 3. Titan glue.
DIY decorative crafts for the garden - “exclusive” products. Everyone brings in what they want to see. For example, homemade items for the garden, such as balls made from plastic bottles, can be completely different. They have one thing in common: the material for manufacturing.
Design options, first of all, differ in mounting methods. But they are not all complicated.
Openwork ball made of plastic bottles
If you want the ball, which acts as a homemade product for the garden, to be dense and openwork, you will have to use only the bottoms of plastic bottles.
Selecting bottles same size, cut off their curly bottoms. Of course, if the ball is large, you will need quite a lot of bottles, but, you see, the effectiveness of the DIY craft for the garden depends on this.
As a base on which to attach decorative layer homemade products for the dacha, the easiest way is to use a ball of cement. It’s easy to make by mixing a solution of cement, sand (3:1) and water (so that the mass is plastic, does not spread, but does not crumble).
The work of decorating the ball must be done quickly so that the solution does not harden. Very large plastic crafts It’s better to decorate together.
Using sharp cut edges, we stick the bottoms into the cement ball - tightly one to the other and to the same depth.
Such plastic crafts can be painted - acrylic paint is best suited for this case.
Plastic fan ballnew bottles
An interesting do-it-yourself garden craft option is a fan ball. You don't even need to cut off the bottoms to do this. And you will need much fewer bottles.
Prepare the plastic bottles that you plan to use for your homemade garden project. Keep in mind that this technique will not work with a whole plastic ball that is too large. That is, plastic crafts of this kind can be made very large (by enlarging the base), but the “fan” look of the DIY garden craft will disappear.
Make a cement ball and simply stick the bottle necks into it. In order for the ball-fan to dry safely and the bottles to be securely attached to the base, you need to hang the product or make a temporary support with a pole.
However, such homemade crafts for the dacha do not necessarily have to lie on the flowerbed: airy plastic crafts can also look interesting.
However, if you try a little, such crafts for the dacha can be made even more original. No one obliges you to use plastic bottles of the same color, but different colors– this is already a potential pattern. For example, using the first fastening technique (bottoms only), you can make a globe with a map in which the oceans blue color wash the continents.
MORE INTERESTING CRAFTS FOR THE GARDEN:
DIY GARDEN CRAFTS.