How to make a magnet with your own hands. How are magnets made? What can be made from permanent magnets

Do you want to create magnets from scrap materials, but don’t know where to start? In this article you will find many ideas and plans that can be implemented.

This article is intended for persons over 18 years of age

Have you already turned 18?

How to make a magnet?

As you know, it is quite possible to make a magnet with your own hands, and even at home. Such a skill will definitely not be superfluous, because in this way you can make souvenirs for the New Year. It is important to remember that by making a magnet yourself at home, you get an absolutely unique thing and precious experience! In this article you will also learn whether it is possible to make a magnet from wood and how to paint a magnet from plywood.

In fact, making such a magnet is very simple. You just need to put in a little effort and show your imagination properly. By making magnets yourself, you will have a good time and get a wonderful souvenir, as well as a skill that will allow you to create things with magnetic properties literally from the materials at hand.

How to make refrigerator magnets with your own hands: ideas

Fridge door magnets are a great design solution if you want to give your kitchen a homely atmosphere.

IN This list presents the most interesting solutions that can be implemented:

• a magnet with a photo will bring a feeling of comfort, because in the photo slot you can put photos of loved ones, children or even pets (besides, all the above categories will be very pleased);
• topiary - a cute craft in the shape of a tree or bush will fit perfectly into the overall outline of the refrigerator;
• notepad - will help you take various notes or leave messages at home, and you can also write down the names of products that you need to buy;
• Christmas tree is a design element inherent to the New Year holiday, which can hang on the refrigerator at any other time.

For many centuries, the dog has been a faithful friend and companion of man on his life's journey. Therefore, a magnet with a picture of a dog placed on the surface of the refrigerator (or any other) will become a wonderful aesthetic decoration. You will find templates for making a dog below.

Regarding materials: the dog’s fur can be made from felt, and the ears can be made from nylon tights. In addition, the puppy can be made from papier-mâché. Such a product can be decorated and diversified with various design solutions, which will add realism to the decoration.

Coffee beans have always been an excellent material to use in fine art. They have an attractive appearance and a pleasant smell. Coffee beans can also be used to create magnets, because with their help you can create absolutely extraordinary sculptures. From them you can glue topiary, which will complement the interior favorably. You can also use them to create a sculpture of a dog. In addition, you can create a coffee heart that will look perfect as a design solution for the kitchen.

We will show you how to make a cat magnet with your own hands.

For this craft you will need:

• coffee beans;
• thick cardboard;
• brush:
• scissors;
• PVA glue;
• jute twine;
• glue gun

Manufacturing

1. Take the cat template you like and cut it out of paper.

2. Transfer the image to cardboard and cut it out.

3. Cover the top with burlap (from the wrong side of our craft!) and leave under pressure for several hours so that the glue dries thoroughly. The burlap will make our magnet more dense.

4. Trim the excess fabric along the contour.

5. Cover the front side of the cat magnet with brown paint so that there are no white spaces in the future.

6. Wait for the paint to dry. Then we glue the end part of the workpiece with twine using hot glue from a glue gun.

7. Glue the cat with coffee beans, also using a glue gun.

8. We fix the magnetic tape on the reverse side.

9. Make antennae from twine. You can take the eyes from an old toy or use small buttons. You can tie a bow around the cat's neck.

How to make a search magnet with your own hands?

It is quite easy to create a search magnet that will always point in a north direction, which coincides with the Earth's magnetic field. To do this you will need a needle, a stopper and a bowl of water. Through all the simple manipulations you will get a device that will involuntarily move parallel to the magnetic field.

You can also create it yourself:

• electric magnet. It is created by passing current through a piece of metal. This is done to create a magnetic field. To do this you will need a nail, wire, adhesive tape and a battery;
• Neodymium magnet. Creating it at home is problematic, because you will need many complex units, but it’s worth a try in any case;
• a levitating magnet is a spectacular design that can decorate any interior with its mystery;
• a magnet for needles on a canvas is an extremely convenient thing that will save you from having to look for needles, since they will all be collected in one visible place;
• A magnet for non-ferrous metals is a thing that will significantly help in finding non-ferrous metals, regardless of the location of the search.

How to make a magnet for welding with your own hands?

A magnetic corner is one of the most important conditions for high-quality welding, because it allows you to carry out welding work as accurately and efficiently as possible. This complex process itself with such a part is simplified, because a welding magnet allows you to fix the parts to be welded in the desired way. When creating such a welding device yourself, it is necessary that it does not need to be literally torn from the object. It is desirable that it be “switchable”, that is, it comes unstuck without external influence. For greater clarity, when creating such a device, you should prepare drawings in advance that will take into account all proportions.

How to make magnets for curtains with your own hands?

Magnetic curtain ties are a device that can make your life much easier. Using magnetic surfaces in your home simplifies many things that you never thought could become even simpler. For example, a magnetic surface for knives on the wall will save you from the need to constantly reach into a desk drawer; you just need to remove the knife you need from the magnetic board. The main thing is to properly calibrate the magnetic field of this device so that it holds the knives vertically, but not strong enough to tear them off.

Making New Year's magnets with your own hands

When decorating your apartment for the New Year (NG), you can also use magnets. The symbol of 2018 is a yellow dog, which, as we know from one of the previous paragraphs, can be depicted from papier-mâché, as well as felt and nylon. This way, you'll have an interesting decorative craft that can hang all year long for obvious symbolism. In addition, using magnets, you can make New Year's decorations from satin ribbons, which do not require additional fastening, because the magnetic field itself will hold them in the place you need. Such a designer find will look extremely impressive and will be appreciated by your guests and family.

Making your own salt dough magnets

Salt dough is an extremely cheap, accessible and extremely flexible material.

To prepare the test you will need:

• 2 tbsp. l. flour;
• 1 tbsp. l. salt;
• a little water and PVA glue.

1. Mix all the ingredients, knead thoroughly with your hands until it stops sticking to your hands.

2. Cover a baking sheet with foil or parchment and place directly on it. Using the stacks we sculpt the necessary figure (for us it will be a heart).

3. Smooth out any unevenness with a wet brush. Place in a cold oven, gradually raising the temperature to 130 degrees. The product must dry completely.

4. Turn off the oven and let the product cool. We paint it in any color. You can use watercolor or gouache. We paint the reverse side black and glue it with magnetic tape. The magnet is ready!

A here from What other materials can magnets be made from?

• from polymer clay. An extremely effective material for modeling, which is ideal for realizing your wildest creative fantasies;
• made of plaster - perfect for creating small objects;
• made of felt - patterns can be found in the public domain;
• from beads. This material has enough options to realize creative potential;
• from foamiran. Plastic suede is gaining popularity in craft circles, and this material is also extremely easy to use;
• from a battery - discharged batteries can be given a second life in this interesting way;
• made of clay - a classic material for needlework. Perfect for creating magnets.

How to make a strong magnet at home?

Like other types of magnets, creating a powerful magnet at home requires a little more effort. As you know, objects are magnetized by friction against other magnets to produce a magnetic field, so in order to create something more powerful, you just need to apply friction more times.

Neodymium magnets have now firmly replaced simple ones. They are made from NdFeB metal alloy, which has excellent magnetic properties. Result: the device is better magnetized and much more resistant to demagnetization, unlike the usual one.

We will consider what can be made from a neodymium magnet in the material.

The first thing that comes to mind is the production of toys and puzzles from this alloy. As a rule, for these purposes, not the strongest magnet is used, which is produced in the form of balls. Crafts made from magnets can be formed into various shapes, and complex sculptural forms in miniature can be formed from neodymium. But it is important to remember that such a toy is prohibited from being given to children under 6 years of age.

A pair of magnets placed in the stomach or intestines can hook the walls of the esophagus, which in turn will lead to perforation, and the victim will inevitably end up in the hospital.

You can make various fasteners from a magnet with your own hands. A pair of medium-sized magnets can be used as a vice. The use of an alloy, in this case, is much more practical, in contrast to a vice made of ordinary metal. Parts of non-standard shapes will be fixed more reliably.

For car enthusiasts, this alloy is generally irreplaceable and can be used in a wide variety of ways. For example, not everyone knew that a magnet can be used to filter oil in an oil filter. If you install it on the drain plug in the engine crankcase, then all metal debris will accumulate at the installation site, which will subsequently make it easier to remove.

Using magnets, it is convenient to search for small metal objects, such as needles or pins on a fleecy carpet. Neodymium can be used to search for metals in the ground or various communications in walls.

The device is suitable for magnetizing various steel objects, such as screwdrivers, needles and more. With its help, a tool or other steel equipment is fixed. Properly installed magnetic holders will help you organize your tools correctly in the workshop or even in the kitchen. In addition, an alloy of such power can magnetize even an old demagnetized magnet.


It is often used to format information on electronic media. Information from video and audio cassettes, as well as from the hard drive and from credit cards, is permanently deleted using a powerful magnetic field.

Options for using magnets in everyday life

Neodymium magnet is widely used in everyday life. The main thing is to be able to show your imagination. There are both standard methods and very interesting applications.

Amazing spice rack

To ensure that spices are always at hand and do not take up much space, you can design a special shelf using neodymium. For this you will need:

1. Metal jars with a transparent lid.
2. Neodymium magnet with a diameter of 1.5x6 mm.
3. Epoxy resin.
4. 100 grit sandpaper.

We sand the bottom of the jars on the outside and use resin to attach magnets. After this, they will stick securely to any metal surface.

Life hack: you can create a metal surface yourself. Simply attach a metal plate to a regular covering. If it is missing, use what you have. For example, the refrigerator door. At the same time, we recommend that you familiarize yourself with the master class on creating without dust and worries.

It turns out beautiful and neat.

Scissors and household tools at hand

Knives, scissors and other household utensils can also be attached to neodymium clamps. To do this, just choose a suitable place, create a strip of magnet and install it. And then kitchen utensils will always be at hand.

By the way, you can use magnets from speakers for this, the main thing is to design them beautifully.

Beer storage method

To prevent beer packaging from taking up extra space in your refrigerator, bottles can simply be hung from the ceiling of the refrigerator compartment. We simply purchase a tape with magnets https://mirmagnitov.ru/catalog/gibkie-magnity/magnitnaya-lenta/ and attach it.

The magnet power will be enough to hold the bottles securely.

Greenhouse using magnets

To surround yourself with house plants, you don’t have to buy large pots and put them on shelves. It is enough to create small containers, for example, from corks and plant your favorite plants.

Then arrange it around you in the way you like best.

Opener for bachelors

Such devices will be appreciated by any man whose house is not ruled by a woman. A decorative plaque with a beer opener is installed on the wall, on which a magnet is attached to the reverse side.

Now you don’t have to collect corks throughout the apartment - they will remain on the opener. By the way, this will allow you to create some collection of drinks.

Tool Carrying Solution for Craftsmen

To ensure that tools and accessories are always at hand, you can make magnetic bracelets and belts with the alloy inside. This will allow you to attach a not very heavy tool to your belt, and to sculpt accessories onto bracelets.

And since the magnet has healing properties, you get an additional bonus.

Place for studs

Any beauty has a huge number of hairpins, but, as a rule, they are often lost. Therefore, you can attach a magnetic tape inside your wardrobe or on the wall of your cosmetic bag, and then all the pins will always be in one place.

Shelf for cosmetics and women's accessories

This device is also created on the principle of a spice rack.

You will need a steel surface and magnets glued to the bottom of the cosmetic cases. A similar surface is installed nearby, on which hooks are attached using neodymium. You can hang your decorations on them.

Housekeeper

Near the exit (in the hallway), a magnetic panel and key fobs are installed on the wall. Never lose your keys again.

You can also attach lighters and other small items that you may need outside the home to these panels.

Don't forget anything

Using magnetic holders, you can leave notes or write a to-do list for tomorrow, and then attach it in the most visible place. This will allow you not to forget little things and always remember what needs to be done.

Order in the nursery

Toys with magnets installed in them are easier to store on metal surfaces. In this way, it will become more interesting for the child to clean the room, which will help achieve the long-awaited order in the nursery.

Study without leaving home

Every child needs to learn, but the time has passed when children wrote on desks. Now you can make a marker board for your child with a magnetic panel on it. You can attach all the necessary devices for studying to it.

DIY Lego

You can make or order small parts of various shapes and sizes, glue magnets to them and create a wide variety of designs on a large metal surface.

These figures can be built together, which will allow the little creator to develop in a creative way.

Healthy sleep on a magnetic pillow

An orthopedic magnetic pillow will allow you to fully relax while sleeping. But before using it, you should consult your doctor, as there are contraindications. For example, the presence of a pacemaker in a patient.


A magnet can be used for various things, the scope of its application is almost endless and the properties of this alloy are of great importance when used. In skillful hands, you can use it to make a huge number of necessary and useful things and accessories.

Video: cool life hacks with magnets

Magnets make life much easier. Watch the video to see how and immediately apply the acquired knowledge in practice!

Sometimes people ask how to make a neodymium magnet with your own hands. Let's try to figure out how possible this is, and what the process of producing such products is all about.

So, the devices we sell consist of an alloy that is 70% iron and almost 30% boron. Only a fraction of a percent in its composition is made up of the rare earth metal neodymium, natural deposits of which are extremely rare in nature. Most of them are in China; they are found in only a few other countries, including Russia.

Before making neodymium magnets, manufacturers create molds for them from sand. Then the tray with the molds is doused with gas and subjected to heat treatment, due to which the sand hardens and retains the future outlines of the metal workpiece on its surface. Hot metal will later be placed in these forms, from which, in fact, the necessary products will be obtained.

Now let's directly look at how a neodymium magnet is made. Unlike ferromagnetic products, the metal here is not melted, but sintered from a powder mixture placed in an inert or vacuum environment. Then the resulting magnetoplast is pressed while simultaneously exposing it to an electromagnetic field of a certain intensity. As you can see, even at the initial stage of production, it is noticeable that the question of how to make neodymium magnets at home sounds inappropriate. The operations and equipment used are too complex. Creating such conditions at home is hardly possible.

After the workpieces are removed from the molds, they are subjected to mechanical processing - they are carefully polished, then they are fired to improve the coercive force of the products.

Finally, we come to the last steps, which will help to finally answer the question of how neodymium magnets are made. The sintered NdFeB alloy is again machine-finished using a special tool. During operation, a cooling lubricant is used to prevent overheating or ignition of the powder.

A protective coating is applied to the magnets. This is due, firstly, to the fact that sintered metals are quite fragile and need to be strengthened, and, secondly, the metal will be protected from corrosion processes and other environmental influences. So manufacturers worry in advance about how to make a neodymium magnet stronger and more durable. The coating can be copper, nickel, zinc. In the last phase of the production process, magnetization is applied through a strong magnetic field. Then they are sent to the warehouse, and from there to customers.

So, after we examined the production process in more or less detail, it became clear that we probably shouldn’t seriously ask the question “how to make a neodymium magnet at home.” After all, this requires not only certain knowledge, but many complex units.

An electromagnet is a magnet that works (creates a magnetic field) only when electric current flows through a coil. To make a powerful electromagnet, you need to take a magnetic core and wrap it with copper wire and simply pass current through this wire. The magnetic core will begin to be magnetized by the coil and begin to attract iron objects. If you want a powerful magnet, increase the voltage and current, experiment. And so as not to have to worry about assembling the magnet yourself, you can simply remove the coil from the magnetic starter (they come in different types, 220V/380V). You take out this coil and insert a piece of any piece of iron inside (for example, an ordinary thick nail) and plug it into the network. This will be a really good magnet. And if you don’t have the opportunity to get a coil from a magnetic starter, then now we’ll look at how to make an electromagnet yourself.

To assemble an electromagnet, you will need wire, a DC source, and a core. Now we take our core and wind copper wire around it (it’s better to turn one turn at a time, not in bulk - the efficiency will increase). If we want to make a powerful electromagnet, then we wind it in several layers, i.e. When you have wound the first layer, go to the second layer, and then wind the third layer. When winding, keep in mind that what you are winding, that coil has reactance, and when flowing through that coil, less current will flow with more reactance. But also keep in mind that we need and important current, because we will use current to magnetize the core, which serves as an electromagnet. But a large current will greatly heat the coil through which the current flows, so correlate these three concepts: coil resistance, current and temperature.

When winding the wire, select the optimal thickness of copper wire (about 0.5 mm). Or you can experiment, taking into account that the smaller the cross-section of the wire, the greater the reactance will be and, accordingly, the less current will flow. But if you wind with a thick wire (about 1mm), it would not be bad, because the thicker the conductor, the stronger the magnetic field around the conductor and, on top of that, more current will flow, because the reactance will be less. The current will also depend on the frequency of the voltage (if on alternating current). It’s also worth saying a few words about layers: the more layers, the greater the magnetic field of the coil and the stronger the core will magnetize, because When layers are superimposed, the magnetic fields add up.

Okay, the coil has been wound and the core has been inserted inside, now you can start applying voltage to the coil. Apply voltage and begin to increase it (if you have a power supply with voltage regulation, then gradually increase the voltage). At the same time, we make sure that our coil does not heat up. We select the voltage so that during operation the coil is slightly warm or just warm - this will be the nominal operating mode, and you can also find out the rated current and voltage by measuring on the coil and find out the power consumption of the electromagnet by multiplying the current and voltage.

If you are going to turn on an electromagnet from a 220-volt outlet, then first be sure to measure the resistance of the coil. When a current of 1 Ampere flows through the coil, the coil resistance should be 220 ohms. If 2 Amps, then 110 Ohms. This is how we calculate CURRENT = voltage/resistance = 220/110 = 2 A.

That's it, turn on the device. Try holding a nail or a paper clip - it should attract. If it is poorly attracted or holds very poorly, then wind up five layers of copper wire: the magnetic field will increase and the resistance will increase, and if the resistance increases, then the nominal data of the electromagnet will change and it will be necessary to reconfigure it.

If you want to increase the power of the magnet, then take a horseshoe-shaped core and wind the wire on two sides, so you get a horseshoe lure consisting of a core and two coils. The magnetic fields of the two coils will add up, which means the magnet will work 2 times more powerful. The diameter and composition of the core plays a big role. With a small cross-section, we will get a weak electromagnet, even if we apply high voltage, but if we increase the cross-section of the heart, then we will get a not bad electromagnet. Yes, if the core is also made of an alloy of iron and cobalt (this alloy is characterized by good magnetic conductivity), then the conductivity will increase and due to this the core will be better magnetized by the field of the coil.

Conclusions:

1. If we want to assemble a powerful electromagnet, then we wind the maximum number of layers (the diameter of the wire is not so important).
2. It is best to take a horseshoe-shaped core (you will only need to power the 2nd coils).
3. The core must be an alloy of iron and cobalt.
4. If possible, the current should flow as much as possible, because it is this that creates the magnetic field.

Fridge magnets are pleasing to the eye and keep our lists, photos, postcards, business cards and coupons visible. Making them with your own hands for yourself or as a gift is very interesting and easy. After all, if you think about it, to make magnetic crafts you can use almost everything that is at hand, just use your imagination, stock up on glue and mini-magnets. In this article, we presented 70 inspiring photo ideas, as well as 5 step-by-step lessons on how to make cool refrigerator magnets (and more) from scrap, natural, and even waste materials.

1. To make refrigerator magnets, you can use three types: ferrite, neodymium (super magnets) and vinyl (rubber).

• If you want your magnetic crafts to hold only light and small sheets of paper, business cards, etc., then you can use ferrite (regular graphite-colored magnets, which are most often used for souvenir products) or vinyl. The latter is a flexible vinyl material with an adhesive base, which has a low adhesive force, but can be cut into segments of different shapes and sizes. An example of the use of a flexible magnet is presented below.

• If you want a magnet to hold heavier things, then to make crafts you need to use neodymium magnets (super magnets), which have 10 times greater adhesion force. So, for example, to make a magnetic hook for a ladle or cutting board, you will need one magnet the size of a 1-kopeck coin. Keep in mind that ideally the adhesive force of the magnet should be 2 times the weight of the craft and the object it will hold.

By the way, a neodymium magnet, unlike a ferrite one, does not lose its magnetic properties over time. Ferrite steel turns into a useless piece of iron after 8-10 years.

1. Where to get or buy magnets for making crafts? They can be peeled off from souvenir products or bought/ordered in construction markets, craft stores, as well as in specialized online stores.
2. When working with neodymium magnets, take precautions and do not involve children in making crafts. Keep in mind that two magnets attached to each other can even pinch your finger.
3. In most cases, superglue, universal Moment glue and its analogues, as well as a hot glue gun are suitable for gluing a magnet to a craft. If your craft is intended to hold really heavy things, then it is best to use a neodymium magnet with a countersink and a screw for fastening.
4. Magnets that look best on the refrigerator are those made in the same style and combined by theme, color or shape.

1. Magnets can be hung not only on the refrigerator, but also on any metal surface, for example, on a magnetic organizing board, range hood or geyser .

In turn, the magnetic organizing board can be installed anywhere, for example, on a cabinet door

Master Class. 1. Hook magnets made from branches

You can hang keys, towels, ladles and other things on these branch hooks.

Materials and tools:

• A dry small but strong branch with a branch;
• Hand saw or jigsaw;
• Small neodymium magnets;
• Glue;
• Drill and drill bit equal to the diameter of the magnets;
• Acrylic paint (optional).

Instructions:

1. Using a saw, cut the branch so that it looks like a hook. Then cut the branch lengthwise so that the back side is flat as shown in the photo below on the left.

1. In this flat back of the branch, drill a recessed hole the size of your magnet.
2. Glue the magnet into the resulting cell.

1. If desired, paint the craft and cover it with matte varnish. Ready!

Master class 2. Magnetic storage jars

If you have some cute tin or glass jars, put them to good use by turning your refrigerator door or magnetic board into an organizer.

Glass baby food jars are great for storing spices on the refrigerator or hood.

Materials and tools:

• Small aluminum cans (cans like those in our master class can be ordered on Aliexpress for 300 rubles/10 pcs.). You can replace tin cans with glass jars or small plastic containers;
• Paint of the desired color (it is more convenient to use spray paint) and matte varnish (not necessary, but desirable to protect the coating);
• Neodymium plate magnets (especially if you want to use large jars and store heavy items in them) or 0.6mm thick magnetic vinyl self-adhesive sheets;
• Superglue “Moment” (needed if you use neodymium magnets).

Instructions:

1. Make sure the prepared jars are clean and dry. Paint them, as well as their lids, in 2-3 layers, allowing each layer to dry thoroughly. Next, coat the jars with varnish, if any.

• If you are using jars with a glass insert on the lid, you will need to remove it or seal it with masking tape before painting.

1. Cut circles from a magnetic sheet; their diameter should be slightly smaller than the diameter of the cans. If you use neodymium magnets, then glue them with superglue.

1. Glue the cut out circles to the bottom of the jar, removing the protective backing.

1. If desired, the lids of the jars can be further decorated. For example, as shown in the photo below.

Master class 3. Magnets from tin caps (crown caps)

The idea of ​​recycling soda or beer bottle caps as refrigerator magnets will appeal not only to environmentalists, but also to decorators. After all, they cost nothing at all, but provide a lot of opportunities for decoration.

So, for example, you can paste family photos or just nice paper (card scraps, magazine clippings, etc.) inside the lids.

Homemade photo frame magnets

You can paint the lids, fill the insides with hot glue or cork, and then glue magnets to them.

Sometimes bottle caps don’t need to be decorated at all.

Instead of beer caps, you can use larger caps, such as Nutella jars or baby food caps, to make refrigerator magnets.

Materials and tools:

• Scissors, or better yet, a hole punch for scrapbooking for cutting out circles with a diameter of 2.5 cm (sold in craft stores and costs 200-300 rubles);
• Epoxy resin, a container for preparing the solution and a stirring stick;
• PVA glue, as well as superglue;
• Small magnets;
• Photos that are suitable in size or any other pictures, for example, from a magazine;
• Beer caps (it's best to use bottles with screw caps rather than pop caps).

Instructions:

1. Using a hole punch or scissors, cut round fragments with a diameter of 2.5 cm from the photographs. Of course, if you use scissors, you must first make a marking using one of the caps (or a plastic cap from a plastic bottle) as a template.
2. Glue the pictures to the inside of each lid using PVA glue (the glue must be applied on top of the picture as well). Let the glue dry completely (!).

1. Following the manufacturer's instructions, prepare the epoxy resin in the quantity you need. To find out exactly how much resin you will need, pour water into one of the lids, then multiply the resulting volume by the number of lids. Line your work surface to protect it from spills, then fill each lid to the brim. Let the crafts dry overnight.
2. Glue magnets to the blanks. Ready!

Master class 4. Magnets from plastic mini-toys

The most stylish magnets can be easily made from plastic toys, namely animal figurines.

Materials and tools:

• Scissors or sharp knife;
• Thermal glue in a gun;
• Paint and brush if necessary;
• Small magnets;
• Plastic animal figurines.

Instructions:

1. Cut the toy in half or lengthwise.
2. Pour hot glue into the inside of the resulting workpiece to the very edges and leave to dry.

1. When the glue has hardened, start painting the craft (including the “filling”) in 1-3 layers. At the end it can be additionally varnished.
2. Now just glue the magnet to the figure and enjoy the result!

Master class 5. Magnets from clothespins

Let us reveal a little life hack - magnets made from clothespins can not only store lists and bills, but also clamp bags of food as shown in the photo below. It turns out to be very convenient - I took the clothespin off the refrigerator and immediately fixed the opened bag with it.

Wooden clothespins can also hold a piece of paper on the refrigerator door and at the same time clamp something between the teeth.

Clothespins can be painted, decorated with glitter, covered with colored tape or appliques, or decorated using decoupage technique, following the following simple instructions.