Lilies of the valley from plastic bottles can decorate your yard or dining table, depending on the option that you have in mind for production. This kind of work will give you undoubted pleasure.
Master class on making lilies of the valley from the necks of plastic bottles
If you want to make something large that can fit on your garden plot or in front of the entrance apartment building, then this master class is just for you. Let's look at how to make irresistible spring flowers using plastic bottle necks.
You will need the following tools and materials for work:
- Metal rods;
- Wire;
- White small plastic bottles in the number of planned colors;
- Nail or awl;
- Large five liter bottle.
Work progress with detailed description:
- Give the pins a curved appearance.
- Cover them with dark green paint.
- Dig the rods to a depth of 15-20 cm, compacting the soil.
- To make the composition more interesting view You will need about six rods, three long and three short for leaves and stems.
- We will make leaves for flowers from large plastic bottle. It needs to be cut so that you get several pieces.
- We take all the lids that will be the cores of the flowers, using a heated nail or awl to make two holes. We pass the wire through them and tie it to the pin. Additionally, for better bonding, add a little epoxy glue.
- We cut white plastic bottles in half and turn the cut parts into petals. At the same time, we treat all sharp edges with fire (you can use a candle) to bend them a little.
- We screw our blanks to the lids. And the work is ready.
You can endlessly vary the number of rods and colors. This composition is perfect for decorating areas near kindergarten, because kids like everything unusual. If you don't have white bottles, you can take clear ones and cover them with matte white paint. Such flowers will look good at a distance of a couple of meters, but if you want to make a miniature work, we offer you the following master class.
Master class on making small lilies of the valley from a plastic bottle
The second option is to use plastic bottles and foam to make lilies of the valley of a more modest size. They will look like in the photo.
To create flowers you will need the following materials:
- You will need scissors.
- A 1.5 liter plastic bottle, preferably green.
- Foam balls the size of a large pea.
The work itself will not be difficult, and the sequence of actions will be as follows:
- Cut off the neck of the bottle so that there remains a bottom and a flat part 15 cm high.
- Take a marker and draw five lines 10 cm long.
- Cut along them to make six parts.
- From each part we cut out a leaf of lily of the valley and many stems with sharp edges.
- We place foam balls on the resulting stems.
- If desired, you can use a candle to heat each stem, thereby bending it into a spiral.
- You have a bouquet right away on the finished vase. If desired, you can repaint it or add decorations.
Even novice needlewomen can do such a simple job. You can also involve children to fill the balloons. All variations depend on your imagination.
Master class Lilies of the valley from small plastic bottles
If you have a lot of small white plastic bottles left, for example, from yogurt or kefir, then you can do the following:
For it you will need:
- Two liter plastic bottle.
- 10 small white ones.
- Regular napkins.
- Three twigs.
- Wire and tape.
- Marker and brushes
- Scissors or utility knife.
- Decorative bag.
- We create buds by cutting the bottles in half.
- We cut the petals and curl them a little.
- We make holes in the covers and pass wires with a pre-bent end for fastening.
- To attach to the rods we use electrical tape.
- Flower petals are cut out from a two-liter plastic bottle. They don't have to be the same.
- Then we cover them on both sides with a layer of green paint.
- We assemble the entire composition by securing the branches into a decorative pot or bag.
- We will need napkins to create unopened buds. We will also put them on a wire and attach them to the work.
- Your product is ready! All that remains is to cover the stems with green acrylic paint.
This work can be done with a different number of flowers and buds, it all depends on your desire.
Video on the topic
For a clear understanding of all aspects of the work, we suggest you watch a video on the topic of making lilies of the valley from bottles:
Lilies of the valley can add beauty to your yard or dining table if they are made from plastic bottles, depending on the option you have in mind for making them. This kind of work will give you undoubted pleasure.
Master class on making lilies of the valley from the necks of plastic bottles
If you want to make something large that can be placed in your garden plot or in front of the entrance to an apartment building, then this master class is just for you. Let's look at how to make irresistible spring flowers using plastic bottle necks.
You will need the following tools and materials for work:
- Metal rods;
- Wire;
- White small plastic bottles in the number of planned colors;
- Nail or awl;
- Large five liter bottle.
Work progress with detailed description:
- Give the pins a curved appearance.
- Cover them with dark green paint.
- Dig the rods to a depth of 15–20 cm, compacting the soil.
- To give the composition a more interesting look, you will need about six twigs, of which three long and three short for leaves and stems.
- We will make leaves for flowers from a large plastic bottle. It needs to be cut so that you get several pieces.
- We take all the lids that will be the cores of the flowers, using a heated nail or awl to make two holes. We pass the wire through them and tie it to the pin. Additionally, for better bonding, add a little epoxy glue.
- We cut white plastic bottles in half and turn the cut parts into petals. At the same time, we treat all sharp edges with fire (you can use a candle) to bend them a little.
- We screw our blanks to the lids. And the work is ready.
You can endlessly vary the number of rods and colors. This composition is perfect for decorating areas near a kindergarten, as kids like everything unusual. If you don't have white bottles, you can take clear ones and cover them with matte white paint. Such flowers will look good at a distance of a couple of meters, but if you want to make a miniature work, we offer you the following master class.
Let's make small lilies of the valley from a plastic bottle
The second option is to use plastic bottles and foam to make lilies of the valley of a more modest size. They will look like in the photo.
To create flowers you will need the following materials:
- You will need scissors.
- A 1.5 liter plastic bottle, preferably green.
- Foam balls the size of a large pea.
The work itself will not be difficult, and the sequence of actions will be as follows:
- Cut off the neck of the bottle so that there remains a bottom and a flat part 15 cm high.
- Take a marker and draw five lines 10 cm long.
- Cut along them to make six parts.
- From each part we cut out a leaf of lily of the valley and many stems with sharp edges.
- We place foam balls on the resulting stems.
- If desired, you can use a candle to heat each stem, thereby bending it into a spiral.
- You have a bouquet right away on the finished vase. If desired, you can repaint it or add decorations.
Even novice needlewomen can do such a simple job. You can also involve children to fill the balloons. All variations depend on your imagination.
If you have a lot of small white plastic bottles left, for example, from yogurt or kefir, then you can do the following:
For it you will need:
- Two liter plastic bottle.
- 10 small white ones.
- Regular napkins.
- Three twigs.
- Wire and tape.
- Marker and brushes
- Scissors or utility knife.
- Decorative bag.
Work progress:
- We create buds by cutting the bottles in half.
- We cut the petals and curl them a little.
- We make holes in the covers and pass wires with a pre-bent end for fastening.
- To attach to the rods we use electrical tape.
- Flower petals are cut out from a two-liter plastic bottle. They don't have to be the same.
- Then we cover them on both sides with a layer of green paint.
- We assemble the entire composition by securing the branches into a decorative pot or bag.
- We will need napkins to create unopened buds. We will also put them on a wire and attach them to the work.
- Your product is ready! All that remains is to cover the stems with green acrylic paint.
This work can be done with a different number of flowers and buds, it all depends on your desire.
Video on the topic of the article
For a clear understanding of all aspects of the work, we suggest you watch a video on the topic of making lilies of the valley from bottles:
To decorate your garden or local area You don't have to buy expensive garden sculptures. Sometimes it is enough to make lilies of the valley from plastic bottles or other interesting crafts. They will withstand frost and heat, wind and rain, and will cost almost nothing. Also available suitable option and for home decoration.
Master classes: lilies of the valley from plastic bottles
Option 1
Materials and tools: metal rods, wire, small white plastic bottles according to the number of cups of lilies of the valley, a nail or awl for punching holes in the lids, a large 5-liter green plastic container.
It is necessary to give the pins a natural curved appearance, like the stems and leaves of lilies of the valley, and then cover them with dark green enamel paint. Next you need to dig the rods to a depth of 15-20 cm, additionally compact the earth for better stability. For interesting composition you will need at least 6-7 pins: 3 long for stems and 3-4 short for leaves.
We cut out leaves for lilies of the valley from a 5-liter bottle plastic container so that you get several wide symmetrical leaves, straight and folded in the form right angle.
Now you need to take all the covers that will play the role of the core of the flower, and use a hot nail or awl to make two holes each. You need to thread a metal wire through them and tie it to a pin, additionally dropping a drop at the junction of the wire and the rod epoxy glue.
White plastic bottles are cut in half, and then a lily of the valley bell skirt is cut out of the top. All sharp cuts are treated with a candle flame. The cut out petals need to be slightly warmed over a candle to bend the edges up. Now all that remains is to screw the flowers to the lid on the rod, and lilies of the valley from plastic bottles are ready!
Here you can endlessly vary the size of flowers and leaves, their shape and number on the rod. You can even make unusual hot pink or blue “bells”. This is all at the discretion of the author. Can be attached to inside The lids have small bells so that even with a slight wind a light chime can be heard.
Option 2
The previous option, due to its massiveness and materials used, looks good at a distance of 2-3 meters. But for home you need to make a more delicate bouquet. To create it, you will need scissors, a 1.5-liter green plastic bottle, and foam balls the size of a large pea or smaller.
Cut off the neck of the bottle so that the bottom and a flat part about 15 cm high remain. Using a marker, mark 5 vertical lines 10 cm long, the result should be 6 equal parts. From each part you need to cut out a leaf of lily of the valley and many stems for “bells” with pointed edges. Styrofoam balls are strung on them, creating the appearance of real lilies of the valley. The result is a bouquet located immediately on the finished vase. If you wish and have free time, you can heat each stem a little and twist it into a spiral to make everything even neater and more natural.
Now you know how to make lilies of the valley from plastic bottles. You can decorate your house and front garden with them, then these little “children of spring” will be with you all year round!
They become increasingly valuable, because in the end they turn out unique items, which cannot be found in any store. Such fruits of one's own manual labor can be used anywhere, the exterior of the house is no exception.
Lilies of the valley will perfectly decorate the garden, and plastic bottles will be used to make them. There are several ways to turn an idea into reality. The first option involves the use of 3 steel rods, 20 opaque products white made of plastic and 6 meters of reliable thread. Green paint will help decorate the entire structure in the toga. Bottles should not be rid of caps; they will also come in handy.
The first version of making lilies of the valley
The bottles should be cut so that their central part forms teeth, the bottom should be removed, and upper part will form a flower bud. Each lid should have 2 holes, which are useful in order to be able to thread a thread through them. You should cut pieces of thread so that each of them is 30 cm long. The thread must be tied, leaving its ends free.
Now comes the turn of the steel rods, which need to be bent, coated with paint, and then bottles are tied to them using threads, which also need to be painted. At this point, the lilies of the valley are ready for installation on the site near the house. The design will look more elegant if it is supplemented with leaves, for which any material can be used. You can use it for this garden mats.
The second option for making lilies of the valley
This time the work will involve using wire, the same bottles and wrapping, which can be replaced with tape to decorate bouquets of flowers.
The composition will be based on a wire frame. The frame will be presented in the form of stems, onto which the bud blanks, cut in advance from a plastic base, should be attached. The resulting frame should be wrapped with existing green tape.
Great option, which will allow you to replace tape and make the structure more durable, will be a method of painting elements in green, during which you can use enamel. This will protect the frame flower arrangement from external influences sun rays and precipitation. And on winter period the flowers do not need to be removed, which will make the snow-white carpet in the garden more attractive.
By using skillful hands and imagination can transform any interior. Our children can be wonderful helpers in this matter. In this article we will talk about how to make lilies of the valley from plastic bottles.
To make lilies of the valley we will need:
- one and a half or two liter plastic bottle (for example, lemonade);
- white half-liter bottles of kefir or drinking yogurt;
- wire (it’s better to take thick and thinner ones) electrical tape;
- toilet paper;
- PVA glue;
- acrylic paints and brush;
- pliers;
- an awl and a stationery knife.
For the base we need a pot filled with pebbles.
1. First you need to cut the wire into pieces. From the thicker wire we cut 3 pieces of length 110, 85 and 60 cm. From the thinner wire - 15 pieces about 10 cm long.
2. Take kefir bottles and cut them in half.
3. Then we cut out petals on them.
4. Bend the petals outward using heated over gas burner pliers Do not heat the pliers for too long, otherwise the plastic will melt. It is enough to just hold them near the fire for a few seconds.
5. The result is a flower blank.
6. Pierce the bottle cap in the middle with an awl.
7. Take a piece thin wire and round it on one side to form a loop.
8. Insert the loop into the hole in the kefir lid so that the loop remains inside.
9. Using electrical tape, attach the free tail to a thick wire so that approximately 15 cm remains from its end.
10. Repeat steps No. 1 - 8 for all 11 white bottles. We attach all flower blanks to the main wire branch as follows: on a long wire - leave 25 cm from the end and attach 4 flowers. On medium and short ones, leave 15 cm from the end and attach 4 and 3 flowers, respectively.
11. Take a large plastic bottle and draw 4 long petals on it with a marker.
12. Cut out the petals from the bottle.
13. Twist the free ends of the wire together, insert them into the hole for draining water into the flower pots and pebbles. The level of the pebbles should be slightly lower than the sides of the pots.
14. We spread the wire branches in different directions.
15. Take the remaining ten-centimeter pieces of wire and make a loop at one end, as for attaching flowers. Take a piece of toilet paper and wrap it tightly around the loop to form a small ball. Then, take a piece of toilet paper about 15 cm long, place it on the resulting ball, crumple it a little in the center and press it down, twist the remaining part along the free end of the wire.
16. It turns out to be a bud.
17. Repeat step No. 15 four times and get 4 buds.
18. Using electrical tape, attach the buds to the branches with lily of the valley flowers.
19. Wrapping toilet paper all three wire branches.
20. Glue the wrapped branches with glue.
21. Let the glue dry and paint the entire branches and kefir lids on top of it with green acrylic paint.
22. Our lilies of the valley are almost ready. Let the paint dry for a couple of hours.
23. Paint all 11 lily of the valley flowers and 4 buds with white paint. Let it dry.
24. Paint the leaves with green paint, leave them to dry and insert them into the pebbles.
Such wonderful lilies of the valley have grown and blossomed in our house! And so, just like in a real forest, beautiful butterflies and granny box bugs flew to our flowers. Such flowers will never wither and will always remind you of summer.
If you find an error, please highlight a piece of text and click Ctrl+Enter.