How to properly transport a refrigerator in a horizontal position. Is it possible to transport a refrigerator lying down?

It would seem that there is something incomprehensible here: vertically, that’s all. But no. In fact, you can skillfully transport such a fragile piece of household appliances in three positions.

1. Vertical. This option is the simplest and safest, provided that the device is securely secured with strong straps, the door is tied, and the shelves are removed. It is important that the refrigerator cannot move or fall, so fixation plays a decisive role here.
2. At an angle. If for some reason it is impossible to transport the refrigerator “at full height”, then the optimal option would be to transport it at an angle. It is important to follow the loading and unloading technology, and such cargo must be transported with extreme caution. In particular, the tilt angle should not exceed 40 degrees, and the equipment should be carefully prepared and packaged before transportation.
3. Lying down. The most dangerous way. If you don’t want to take risks, it’s better to order delivery by more appropriate transport and bring the refrigerator back undamaged. But, if you cannot live without adrenaline, strictly follow the instructions located at the end of the article.

Preparing the refrigerator compartment for transportation

The success of an enterprise largely depends on how correctly the equipment is prepared for transportation. How to transport a refrigerator:

1. Remove food from the chamber in advance, wipe it and defrost it to room temperature.
2. Take out all the set elements (shelves, compartments for vegetables and fruits) and pack them. It is advisable to cover all glass elements with something shock-absorbing, and fill the boxes with something so as not to crush them.
3. If possible, pack the unit itself to avoid scratches or more serious damage. The more carefully you need to wrap the equipment, the further it needs to be transported and the worse the road to its destination.
4. All doors must be in mandatory secured with belts or tape if you are sure that it will not damage the enamel. This is necessary, because during the trip the hinges will probably become loose, and re-hanging the refrigerator door is quite a troublesome task.

Horizontal transport of refrigerator

To transport a working refrigerator lying down, you need to strictly follow the instructions - then there is every chance of delivering it absolutely safe and sound. We follow the points:

• When lying down, the refrigerator can only travel on its side, and only in such a way that the door hinges are on top. Under no circumstances try to transport equipment on the back or door - then damage is inevitable.
• The door must be locked. It is best if more than one is placed under the belt or a thick ring of tape. soft material, at least cardboard, so as not to damage the coating.
• The floor of the car must be strictly level; protrusions and holes reduce the chances of effective result. Lay soft cardboard, an old blanket or something like that on the floor.
• The position of the refrigerator must be securely fixed with belts so that when moving it does not move, rub or hit something that could damage it.
• The driver must drive carefully, avoiding potholes, at low speed, and avoiding bad roads.
• Loading/unloading should be carried out smoothly, without jolts or sudden movements.
• Upon arrival, do not rush to turn on the device - it should stand turned off for 2-3 hours so that all technical fluids drain into place.

As for the inevitable damage during recumbent transportation, it is worth noting that they are quite possible when traveling in any position if safety measures are not followed. As for horizontal transportation, it can be the last straw only for old, dying refrigerators. For newer models, for example, No Frost, it is no more harmful than other types. Therefore, in order not to take sedatives over damaged equipment, just be careful with it, follow the instructions on how to transport a refrigerator, and it will last for many years.

Nowadays it is difficult to imagine a kitchen without a refrigerator. He became a long time ago an indispensable assistant in every home, and if the family moves to new apartment, then such a unit moves with it. Naturally, in this case, many questions arise about the transportation of this large cargo. Transportation is also complicated by the fact that it contains a refrigerant that has high fluidity.

When transporting over long distances, if even a small crack appears, the gas begins to evaporate quickly, and the refrigerator may break because of this. In the material you will learn how to properly transport a refrigerator to a new place, as well as in what position – vertical or horizontal – it can be transported.

Which position is best when transporting a refrigerator?

Manufacturers of units indicate that transportation is best carried out in vertical position and original packaging, which can protect the refrigerator from shock and damage. But they do not recommend transporting it horizontally.

Why can't you transport refrigerators lying down? Manufacturers do not recommend doing this for the following reasons:

So is it possible to transport a refrigerator lying down?

However, many still believe that it is best to transport the refrigerator in this position, especially since it is the only option if it is not possible to place the unit vertically in the car.

Let's figure out how to properly transport a refrigerator lying down. Unlike washing machines, Refrigerators can only be transported lying on their side, it doesn’t matter which one. But it is important that at the top there was the side on which the compressor oil pipes go; most often, the door hinges are located on the same side. But it is strictly forbidden to place the device on the back wall, so that it does not break.

Now you understand how to transport this equipment while lying down. But don't forget It is good to secure the doors with tape, it is advisable to secure the compressor so that it does not dangle during transportation. For this purpose, you need to use the special packaging materials included with the device. Alternatively, use tape. The most important thing when transporting on its side is to ensure maximum immobility for a large and bulky device.

When transporting a refrigerator lying on the wrong side, oil can get from the compressor into the circulation system, which is the danger mentioned above. If the refrigerator does not break down, you will still have to wait several days for the oil to drain into the compressor before putting it into operation at the new location.

Other rules for properly transporting the device while lying on its side include:

• when transporting, place thick cardboard, foam plastic or a soft blanket under the refrigerator;
• secure it as much as possible;
• You cannot drive fast on the road, make sharp turns or drive into potholes.

And remember, if the distance was long and the road was far from ideal, then the device should stand longer before turning on.

Is it possible to transport a refrigerator lying down: what do service specialists think about this? They say it is possible, but on the side and for short distances. It is advisable that transportation takes no more than half an hour. But if the road is long, then it is better to find a vehicle where the device can be placed vertically.

There are statistics that out of 10 cases of transporting a refrigerator lying down, 1-2 are problematic. In this case, problems are caused not so much by the position of the device as by other factors:

• shaking on the road;
• rough transportation and loading;
• loose compressor.

Rules for transporting refrigerators

Transportation features depend largely on the model of the device. It is very important to choose the right transport depending on the following:

• the mass of the refrigerator and its dimensions;
• duration of transportation;
• presence of decorative coating.

And only depending on this, choose a vehicle for transportation and material for packaging equipment.

Also follow all the rules listed in the instructions. Don't skimp on packaging materials or you may have to buy new refrigerator.

Equipment up to two meters high can be transported in Gazelles or similar types of vehicles. This option in this case is the cheapest and safest.

Transportation of old domestic devices is very simple and has practically no special requirements. The walls are predominantly very thick and made of steel; such equipment is resistant to mechanical stress and very durable. And here modern devices must be transported very carefully.

If you are transporting a used refrigerator, be sure to defrost, dry and wash it first. Removable parts are removed and packaged separately. If you are transporting all your belongings, then you can place items of clothing or clothing wrapped in plastic inside the refrigerator. bed sheets and put bales of something soft there.

Then we start packing. Most often, this is drywall or bubble wrap; they need to be secured around the equipment with tape.

Before transportation pay attention to the compressor. Some have special shipping bolts that you just need to tighten. If there are none, secure the compressor with cardboard spacers. Wrap the appliance with adhesive tape to prevent the door from opening accidentally.

Unloading

Be careful when loading and removing equipment. Particular care must be taken when carrying through doorways, climbing stairs or boarding an elevator.

You need to be especially careful when unloading the refrigerator from the car.. To avoid damaging the compressor, tilt it only on its side or towards the rear wall. If the device is equipped with special wheels for transportation, then make sure that they will not damage your floor in any way. When lifting, it is not recommended to use the lower front panel, as it plays decorative role and may not withstand the dimensions of the device. Particularly large and massive models are best transported in a special cart.

How to turn on the refrigerator after transportation

So, when you have brought the device to the site and even brought it into the apartment, you cannot immediately plug it into the electrical network. To start check how the compressor pipe is positioned, it should be directed upwards, so the oil will not flow into the circuit.

When you bring the refrigerator into the house, let it sit without turning on for at least three hours. It should adjust to room temperature. And only then can you plug it into the network and fill it with products.

Now you know how to transport a refrigerator lying down or in another position so that it does not break when transported to a new place, as well as how to transport it correctly and turn on the device in a new place.

Moving is stressful for any owner. After all, you need to not only collect and then unpack all your things, but also do it in such a way that nothing breaks during the trip. The transportation of various expensive equipment, the most important of which is the refrigerator, raises especially many questions. How to deliver kitchen assistant to your new home unharmed, and at the same time save on professional transportation services - read on.

Transporting a refrigerator is the most main problem when moving. Despite its size, this unit is quite fragile; in addition, it is heavy and has a high price.

You must understand that you will not be able to move the refrigerator into the car alone, so you need to have an assistant with a strong back on hand.

If you want to deliver the refrigerator to a new location undamaged, then you need to properly prepare it. Even if your ultimate destination is the city, bumps in the roads can render an unpackaged, fragile device unusable.

How to properly prepare your refrigerator for a trip:

1. On the eve of your trip, remove all food and medications from the refrigerator. Allow the unit to defrost completely and wash with disinfectants.
2. After defrosting the refrigerator, wait until all parts of the appliance are completely dry, remove all loose drawers and shelves from it. Pack the parts with special bubble wrap or newspaper.
3. The refrigerator must be transported closed. To prevent the door from opening while traveling, secure it with straps or tape.
4. Secure the compressor. It can be done. Tighten the bolts tighter. If there are no bolts, then strengthen the structure with cardboard or rubber spacers.
5. Next, you need to pack the refrigerator. It is best to use the original packaging for this. If there is none, then wrap the device in bubble wrap.

Having prepared the refrigerator in this way, you will be able to transport the refrigerator to your new place of residence as smoothly as possible. You cannot transport a refrigerator without preparation.

How to properly transport a refrigerator when moving

To transport a refrigerator to a new location, you need to properly prepare it. In addition, you need to follow some transportation rules.

Rules for transporting a refrigerator:

1. You need to carry the refrigerator to the elevator and to the car in an upright position. To lift it carefully, you will need at least two people who can support it. heavy loads. You can also use special portable belts.
2. Carry the refrigerator carefully, do not swing it or drop it. Hitting this fragile device against a wall can damage it or simply ruin its appearance.
3. Lay a thick blanket or cardboard boxes on the floor of the car in which you will transport the refrigerator.
4. Place the refrigerator in the car in an upright position. Make sure it's top part not scratched. Check the stability of the device.
5. Manufacturers advise transporting refrigerators at an angle of no more than 40 degrees. Otherwise, freon and oil may not be distributed correctly.
6. To prevent the device from falling over during transportation, secure it with straps and supports.

By following these rules, you will be able to deliver your refrigerator safe and sound. If you are not sure that you can fulfill them, contact special transport services.

Tips: how to properly pack a refrigerator when moving on its side

Sometimes it is impossible to place the refrigerator in a car in an upright position. In this case, you can try to move it on its side, but in this case its safety cannot be guaranteed.

Transporting the refrigerator in a lying position is strictly prohibited. In this case, the device may not survive transportation.

Of course, manufacturers do not recommend transporting refrigerators horizontally, but when there is no other choice, this option is also possible. The main thing is not to transport the device on the door or on back wall.

What can happen when transporting a refrigerator in a horizontal position:

• The tubes may break;
• The supercharger may become clogged with oil;
• Cracks may form on the compressor and freon may leak through them;
• Compressor mounts may fly off.

As you can see, the problems that may arise when transporting in a horizontal position are quite serious. However, by following some rules, you can transport the refrigerator to a new location safe and sound.

Rules for transporting a refrigerator in a lying position:

• Remove all shelves and drawers from the refrigerator and wrap each of them individually;
• Secure the refrigerator door in closed position using tape or belts;
• Lay a blanket on the bottom of a wooden box and nail the planks to it on one side;
• Pack the refrigerator in wooden box so that the tubes coming out of the compressor face up;
• Place the box with the refrigerator in the car and secure it in it with supports and straps.

Of course, even following all these rules does not guarantee that when transporting the refrigerator on its side, it will not break. However, our tips will allow you to reduce the risk of malfunctions by 70%.

What to do after moving a refrigerator without packaging

To ensure that the transportation of the refrigerator is as gentle as possible, it is not enough to prepare it correctly. You must follow several rules to prepare it for inclusion.

How to prepare the refrigerator for switching on in a new place:

1. Transporting a refrigerator to winter time year is bad because during its transportation the oil has time to thicken. If you turn on the device immediately, the compressor may break. To prevent this from happening, wait 24 hours before plugging it in.
2. When transporting the refrigerator on its side, the refrigerant and oil flow to one side. In order for the substances to flow into place, you must wait approximately 12 hours before turning on.
3. If you transported the refrigerator in an upright position, then there should be no problems. In this case, you only need to wait two to three hours.

How to pack a refrigerator for transportation (video)

Transporting a refrigerator is a very responsible task. However, if everything is done correctly, then there should be no problems.

Is it possible to transport a refrigerator lying down? This question interests many. If you bought a new refrigerator and want to save on delivery, are planning to move to a new place of residence, or want to transport your “old” refrigeration unit to a cottage, then the question of transporting household appliances arises. How to transport a refrigeration unit correctly so as not to break it during transportation over long distances? The answer is simple - you need to study the operating instructions and strictly follow the transportation instructions. If the instructions are missing, or the recommendations in them cannot be followed for motor vehicle, then you should know the information presented in the article. The tips given in it will help prevent mistakes and transport equipment in a lying position, avoiding damage to the Atlant unit or another refrigerator model.

A refrigerator, despite its apparent strength and solidity, is a rather vulnerable thing, and incorrect transportation can damage the unit. Therefore, most manufacturers insist that transportation be carried out in a vertical position, standing - this minimizes the risk of component failure and oil getting into the refrigerant circuit, which can cause the capillary tube to clog and lead to complete breakdown of the refrigerator. But this option is not always acceptable: the height of some refrigerators is 2 meters or more, and to transport them in a vertical position, you will need to use serious vehicle, which, for example, a consumer’s personal car is not. The question arises: is it possible to transport the refrigerator to passenger car on its side, in a horizontal position?

Yes, you can carry it lying down, but very carefully.

Below we will list the procedure for transporting household appliances lying on their side, which will help prevent breakdowns and, as a result, unnecessary financial expenses. If a new refrigeration unit has been purchased, and the consumer plans to pick it up from the store himself, then there is nothing complicated: usually there are special signs on the packaging box that indicate which side the unit is allowed to be placed on during transportation. In addition, during transportation new technology, you won’t have to think about packaging and padding with foam. Some manufacturers remove the warranty from household appliances when transporting them horizontally, so before transportation, you need to clarify this issue with your sales consultant.

If the unit is “old” and needs to be sent to another place, and the box has not been preserved, you will need to follow a special rule:

• Household appliances are defrosted and prepared;
• The refrigerator is placed on its side;
• The tube through which the refrigerant comes from the compressor should point upward.

How to carry out transportation on its side according to the rules, why do they need to be followed? In this case, the oil from the compressor will drop into part of the return circuit, and its residue will be poured back into the compressor when the unit is first started after transportation. If this point is not taken into account, then the oil that entered the circuit from the compressor during the transportation period will be carried further by the refrigerant flow when the refrigerator is operating, which will cause contamination of the capillary tube, and Appliances will break. Therefore, if you decide to transport horizontally, it is important to understand which pipe the freon exits the compressor through - this must be done before packing.

About whether it is possible to transport a refrigerator in a lying position: find a tube with freon

Finding a freon tube is not difficult. You should carefully touch the tubes that come from the motor with your hand while the refrigeration chamber(this must be done 0.2 hours after turning on the device to the mains). The one that heats up is the one with freon.

According to the design of refrigeration equipment:

• Freon gas, after leaving the compressor, is sent to the condenser;
• There it gives off heat to the space;
• Condensation forms.

During transportation, the unit must be placed on its side so that the freon tube is on top. The discharge tube can become very hot, so be very careful when touching it. For a number of equipment models, the tubes are located on one side of the compressor - then everything is simple.

During transportation, the refrigerator must be laid so that both tubes “look” up.

Is it possible to transport the unit lying on the back wall or door? Some manufacturers allow the refrigerator to be transported on the rear surface. However, if the instructions for the equipment do not contain information about the possibility of such transportation, then there is no need to take risks - it is better for it to move on its side, following the advice outlined above. Transportation on the rear surface is fraught with distortion of the thermal insulation of the refrigeration unit under its own weight. It is strictly forbidden to carry a refrigerator on the door - this may cause damage!

Transporting the refrigerator: when can you turn it on?

The question is also relevant: after what time can the unit be started after transportation? Experts do not advise rushing. This may take from several hours to a day - but, as they say, there is no need to invent anything, the right thing to do is wait, and then a refrigerator with a no-frost system or another will work for many more years.

Include should only be done after:

• Delivery completed;
• The refrigerator "settled";
• The oil dropped back into the compressor.

In cold weather, the oil in the compressor will thicken, and if the equipment is turned on immediately after transportation, the pump may fail. Therefore, if transportation is carried out in winter, then before turning it on for the first time, the refrigerator should stand for at least 24 hours, preferably more. The oil in the compressor should reach room temperature and the condensate should evaporate.

Preparing to move and is it possible to transport a refrigerator lying on its side?

Regardless of the position in which the refrigerator will be transported (horizontally or vertically), you need to thoroughly understand the rules and prepare for this “operation” in order for the event to be successful.

Preparation should be done in this order:

1. The freezer and the entire refrigerator must be defrosted and rinsed.
2. Any drawers or shelves must be removed and packed separately. It cannot be transported inside. But, if special fasteners have been preserved, then you can secure the components inside.
3. The compressor must be locked. Some equipment manufacturers equip it with special transport bolts - these must be tightened. If there are no screws, you need to fix the compressor using cardboard or foam.
4. Then you need to strengthen the doors. Construction tape works well for this.
5. Next, you need to pack the unit itself.

Before descending the stairs and transporting, the unit must be wrapped in 2-3 layers of bubble wrap. After carrying out the manipulations described above, you can raise the equipment. It is necessary to carry and load into a vehicle with assistants.

How to transport a refrigerator correctly: lying down or standing

If the instructions have not been preserved, but you still need to carry them, you should try to follow the advice. The ideal transport position is upright. If equipment is transported lying down, it should be laid out in such a way that the tube through which freon flows is positioned upward. When loading or unloading, it is forbidden to take the refrigerator by the door - it may come off.

All components must be secured inside the refrigerator or packaged separately. The compressor is firmly fixed. It is important to secure the unit in the body or trailer before driving to a new location. When moving, you need to protect refrigeration equipment - no need to brake sharply and pick up speed on potholes. After transportation, you cannot immediately turn on the refrigerator; it is necessary for “acclimatization” to take place.

Expert answer: is it possible to transport a refrigerator lying down (video)

By following the rules, you can easily transfer any household appliance, no matter a refrigerator or an electric stove. If you have doubts that you won’t be able to transport it yourself, it is better to contact a team of specialists; they will help deliver the cargo without damage.

When moving to a new place of residence, you have to transport not only furniture, but also large household appliances, including a refrigerator. And here it is important to know how to do it correctly. The question is also relevant in the case of transporting the refrigerator yourself after purchasing it in a store. If you take some safety measures, there should be no difficulties in delivering your household appliance to its destination.

How to prepare a refrigerator for transportation?

The refrigerator, despite its large parameters, is a household appliance that is quite sensitive to transportation. Begin preparatory work preferably at least a day before the move. Before transporting the device must be completely defrosted. The shelves and drawers that are inside the unit, especially on the doors, must be removed. Any available materials are used as packaging material, for example, newspapers or plastic bags. The removed shelves are placed in small boxes.

It is very important to pay special attention to the packaging of the refrigerator itself. It is tied with tape or any soft straps. This is done in order to avoid unwanted opening of the device door. The original packaging is ideal for transporting the device. If it is not preserved, polyethylene or bubble wrap can successfully replace it. Never transport the refrigerator without packaging!

To avoid damage to the body of the household appliance, it is recommended to lay several layers of cardboard or a blanket on the floor of the car body for transportation.

In general, there are three ways to transport the device:

1. Standing.
2. At an angle.
3. Lying down.

Transportation rules

Rules for transporting a refrigerator while standing

Transporting a household appliance while standing is the most correct option. This way, all the internal parts of the refrigeration unit will remain intact.

Special belts and stops will help secure the household appliance and prevent it from moving. Be sure to secure the refrigerator doors. In modern two-door models they are secured in four places.

It is permissible to slightly tilt the unit, for example, if it does not fit at full height in the back of a car. Important rule - The tilt angle should be no more than 40 degrees!

Freight transport companies have special services for transporting large household appliances. By using it, you can be assured of the safety of your refrigerator! Trust transportation only to proven professionals. Be sure to check whether there is documentation for the transportation of large equipment.

If the unit is taller than 175 cm, its transportation will cost more. The reason lies in the fact that transporting it will require a large vehicle.

Rules for transporting a refrigerator lying down

Often it is not possible to transport the device while standing. In this case it is necessary transport the unit in a lying position. Is it possible to transport a refrigeration unit this way? Of course, this is not entirely correct, but if precautions are taken, it is quite possible.

When you place an order to transport the device, please indicate that the device is large. This will help the dispatcher choose the right car, the conditions in which are most suitable for recumbent transportation of a large apparatus.

By the way, to owners of refrigerators domestic production lucky. They are more tolerant of this kind of transportation.

These recommendations also apply when moving the device on the trunk. True, stricter compliance with the rules is required here. For example, increased care in packaging the refrigerator. After all, the damage received from the trunk is much more serious.

What are the dangers of transporting a home glacier in a lying position? The potential for damage is too great: the compressor mount to the frame could come loose and oil could leak into the supercharger, causing it to clog. In addition, with this method of transportation, the load on the motor is too high. From this cracks form, through which freon flows.

As you know, these refrigerators are durable and reliable. Soviet refrigerators, for example, “Morozko”, “Zil” or “Polyus”, have been serving their owners for decades. It seems that even transportation cannot spoil the work of their well-oiled mechanism. But that's not true! There are rules, which must be observed when transporting the Soviet apparatus.

It is strictly forbidden to transport such refrigerators on its side or back. The motor of these models is too heavy, and with the slightest shaking it can come off the mounts. Only possible way transportation of a refrigerator made in the Soviet Union - standing. The doors and compressor are carefully fixed. High speed and shaking are contraindicated during transportation. Bringing the refrigerator into the room must be done extremely carefully.

If you still had to transport the unit lying down, carefully screw the compressor. Be sure to lay a layer on the floor soft fabric. However, be prepared for the fact that, despite the precautions taken, the device may fail after such transportation.

Transportation of NoFrost refrigerators

IN lately This type of refrigerator is becoming increasingly popular. During transportation, it is very important to follow a number of rules that will help bring the device to its destination without damage.

Refrigerators with the “No Frost” system have a built-in internal suspension of the motor-compressor. According to the manufacturers, such equipment can be moved exclusively in a vertical position. If placed horizontally during transport, the compressor may become detached from the internal spring. The result will be increased noise and disturbances in engine operation.

But if you still had to transport the device in a horizontal position, when bringing it into the room you need to let it sit for half an hour. Many specialists increase this time from three hours to a day. During this period, the oil will return to the compressor and the refrigerator will be ready for use.

Transportation of refrigerators in winter

The refrigerator, like any household appliance, does not tolerate temperature changes. If you are transporting the device in the cold season, pre-wrap it with cardboard.

Upon arrival at the site, it is not recommended to remove the unit from its packaging within two hours. After removing the packaging material, it is also not advisable to touch the device for two hours. The fact is that the refrigerator needs acclimatization, during which all its parts will become room temperature. If this is not done, Condensation forms inside the device, leading to damage to the contacts. And this is a direct path to a short circuit.

Of course, transporting a refrigerator is a process that must be approached with all responsibility. Each equipment owner decides for himself whether he wants to transport the device standing or lying down. If you listen to the recommendations of experts, it is better to do this in an upright position. But when asked whether it is possible to transport a refrigerator lying down, you should answer: “It is possible, but very carefully!” Namely, with the strictest precautions!