How to tighten a plastic door. Features of adjusting plastic doors. Video: adjusting the door vertically

Plastic windows and doors are installed to create warmth and comfort in the house. One of the disadvantages of PVC structures is the periodic disruption of their functionality. Timely adjustment of plastic doors or windows will correct the situation. To perform this procedure, it is not necessary to contact specialists. It is quite possible to adjust plastic doors with your own hands if you know certain instructions.

When adjustment is necessary

A door that is skewed is a signal that it needs adjustment.

As soon as irregularities in the operation of PVC structures begin to appear, it is necessary to adjust the plastic doors yourself. Reasons for concern may include the following factors:

• If the door, when slightly open, begins to close or open on its own under its own weight;
• The first signs of distortion appear. A violation can be detected in a timely manner in this way: on the reverse side of the rotation of the structure, using a simple pencil, a line is drawn on the plastic door when it is closed along the perimeter of the frame. After that, open it and examine the result. If the mark is parallel to the edges, then there is no need to worry. Otherwise, the PVC doors began to sag.
• The following experiment will help determine the degree of deflection in the clamp. To do this, use a regular notebook sheet. It is clamped with a cloth in different places around the perimeter, and then gradually pulled out. If the sheet is pulled out with the same force, then the clamp is in good condition. Otherwise, it is necessary to adjust the pressure of the plastic doors.

The pressure should be adjusted twice a year: before the winter and summer periods. If the pressure of the leaf against the frame is not loosened, the parts of the plastic door will wear out very quickly.

Prevention and monitoring of PVC structures should be carried out in a timely manner. Otherwise, after some time, critical signs may appear that will be problematic to cope with on your own. Sometimes this can lead to a complete replacement of the structure. These signs include:

• force is applied to open the structure;
• when closing the structure, the canvas touches the box;
• malfunction of fittings, such as handles or hinges;
• does not stay closed when the lock is open;
• lets the cold in even with the doors tightly closed.

Regulation instructions

Diagram of door adjustment vertically and horizontally

Adjustment of plastic doors is done with everyday tools and hex keys. The installation of the main fastenings of a PVC device involves adjusting plastic structures according to several characteristics:

• horizontally – adjusting the distance between the canvas and the loop structure at different levels;
• vertically – the ability to change the height of the canvas in relation to the box;
• frontal – adjusting the degree of pressure of the web to the seal.

When starting work on adjusting the PVC door, it is necessary to free the hinges from the decorative panels. Remove only with the doors open using a 3 mm hex key.

Horizontal adjustment

Adjusting the door horizontally

Over time, the plastic structure begins to cling to the box. This occurs due to the fact that the door leaf is able to move in different directions in relation to the hinge structure. How to adjust plastic doors so that they close freely? To do this, the long screw located under the special hinge cover must be adjusted. It is located horizontally. How to properly adjust the balcony door if it starts to catch on the frame? It depends on where the defect appears.

• If the door leaf touches the frame in the latch area or along the entire height, then on all hinges this type is turned a couple of turns clockwise.
• If the door leaf touches the frame in the lower corner, then tighten the screws only in the upper and middle hinges.

Vertical tincture

Adjusting the door vertically

This type of door adjustment with your own hands is used if it has already sagged or, conversely, there are signs of the seal being pressed in. The hinges of a plastic door are adjusted using a vertical screw, or rather by turning it in different directions. You need to adjust it using a 5 mm hex wrench, which is used to rotate the screw. Use a 2.5 mm wrench and a flat-head screwdriver to tighten the strikers at the bottom and top of the door frame. But the locking plate is shifted using a Phillips screwdriver.

Front setting

The degree of pressing of the canvas to the box is different in each case. The fittings will tell you how to adjust the pressure on a plastic door. For details on the intricacies of adjusting plastic doors, watch this video:

• If there are three eccentrics at the end of the door leaf, then they are turned using the necessary tool.
• In some cases, the design of the fittings includes a trunnion. She presses down using pliers. To achieve maximum pressure, the trunnion must be installed at right angles to the door leaf. For minimal pressure, the adjustable element is placed parallel.
• Sometimes, when the blade does not press well, adjustment is carried out by moving the striker. To do this, a special screw is placed under it, which has a hex head.

Adjusting plastic doors that are sagging is sometimes not limited to adjusting the screws. There are times when the screws are adjusted, but the result does not improve. In this case, you should use the glass unit adjustment method. To begin, use a chisel to carefully remove the installed glazing bead. Then install special PVC gaskets between the plastic and the glass unit. Adjusting a plastic door with a double-glazed window helps change the geometry of the door leaf and in this way eliminate distortion.

When removing beads, you need to mark them in order to subsequently install them in their groove. This will simplify the process, since very often manufacturers install different types of glazing beads for the inside and outside of a double-glazed window.

Handle adjustment

Plastic doors have fittings and their adjustment is also important. There are two types of problems that arise with fittings:

• The handle begins to turn poorly or does not close completely. This usually occurs due to deviations in the placement of the plastic sheet. The appropriate settings must be made. If unsuccessful, the lock must be replaced.
• The handle came loose. It is necessary to remove the decorative trim and tighten the screws using a screwdriver.

Adjustment of PVC entrance doors

Recently, the installation of PVC entrance doors has become widespread. This is due to the fact that they have sufficient strength, do not corrode and are resistant to moisture. But, to ensure proper functioning, the plastic entrance door is adjusted at the installation stage. Problems with entrance doors:

• friction;
• creaking hinges;
• poorly pressed door leaf, which can result in cold air entering the room.

For information on adjusting PVC doors, watch this video:

All the adjustment methods discussed above will tell you how to adjust a plastic front door. But differences still exist. The hinges on the entrance doors are different, and there is no tilt-and-turn mechanism. You can configure loops in three ways:

• The height of the door leaf relative to the frame can be adjusted by tightening the hinges from below;
• a poorly pressed mechanism can be corrected by adjusting the upper hinges;
• movement of the door leaf horizontally - from the side.

Adjustment of plastic entrance doors in which creaking has occurred involves lubricating the hinges. The lubricant is selected that can withstand temperature changes well. To lubricate, you need to remove the top cap on the hinges and place the selected product into the hole. To learn what you need to do to get rid of door squeaks, watch this video:

As we see, there are no particular problems in how to adjust a plastic door. But if more serious problems arise, you should contact a specialist.

For the winter, you need not only to insulate windows and walls, but also think about doors, be they entrance doors or even just balconies. The article contains instructions on how to identify problems with a plastic structure without a technician and make the necessary adjustments yourself.

Main problems with balcony doors and their causes

As soon as specialists install a plastic door, they immediately adjust it. To make sure that the craftsmen did their job conscientiously, pay attention to the following points:

1. The door frame is pressed tightly against the frame in all places.
2. The door opens effortlessly and also closes. If it creaks, it means the work was done poorly.
3. The structure is not vertically displaced. You can check this using a building level.
4. The door doesn't sag. A simple test will help you check this. Taking a pencil, trace the closed canvas over the entire area, and then compare the resulting lines with the frame. If they are parallel, the adjustment work was carried out efficiently.
5. If the door, half open, remains motionless, it means it is adjusted correctly.

Attention! Make sure that during this check there is no draft in the room, which would cause even a well-functioning door to close on its own.

Over time, the structure wears out, and then additional corrections need to be made. Most often it is required in the following cases:

1. Part of the lower shutter touches the threshold - a sign that the door is sagging under its own weight. The majority of the weight falls on the glass unit, so if it is double-glazed, the hinges become weaker and the sash moves.
2. The door handle is wobbly. This problem is the easiest to fix. Turn the cap at the base of the handle and tighten the screws using a screwdriver.
3. The sash touches the frame in the center - this indicates that its side part is displaced. This sometimes happens due to frequent temperature changes. Doors that lead to an unglazed balcony are especially susceptible to weather conditions.
4. The door pressure is loose.

Advice. If the door requires additional adjustment, contact the company that installed the door. Do the work yourself only if the warranty period for the plastic structure has expired.

How to diagnose weak clamping density

The following signs indicate that adjustment is needed:

• The canvas is not pressed very carefully to the frame. It feels like air is coming from under the seal.
• The door closes quite tightly, you need to apply more force than usual.

Attention! If this defect is not eliminated, then in winter there will be drafts throughout the apartment.

The following experiment will help determine the need for regulation:

1. Take a piece of paper.
2. Place it between the frame and the door frame.
3. Close the door tightly.
4. Pull the sheet over the edge, remembering how easy it is for you to do it.
5. Repeat the procedure on all areas of the structure.

If you had to put in approximately the same amount of effort each time, then everything is fine. If in some places it was more difficult to pull out the paper, and in others it was easier, start making adjustments.

Advice. To independently adjust the mechanism of a plastic door, stock up on several types of screwdrivers, keys of different diameters with 6 edges, pliers and a set of gaskets.

Instructions for adjusting the pressure

1. Adjust the tightness of the door by rotating special parts - eccentrics - with a wrench and pliers. They are located at the end of the canvas, usually in 3 places: at the top, in the center and at the bottom. You can see what these parts of the mechanism look like in a video or photo.
2. Rotate each eccentric a little, checking how much the pressure has changed. This way you will select the best option and adjust the density, but only in the area of ​​the door handle.
3. To ensure complete tightness of the plastic structure, make adjustments on the hinge side as well. To do this, turn every third adjusting screw both at the top and bottom. It is convenient to use a hex wrench for this purpose.

Advice. Adjust the pressure twice a year, doing it in summer and winter. When it's cold outside, make the fit tighter, and when it's warm, loosen it. It is not recommended to leave the “winter” setting for the summer, since both the seal and the door block mechanism wear out much faster.

Adjusting the door if it is sagging

To eliminate this defect, you can not remove the door leaf from the hinges:

1. Having opened the doors, find a screw on the top canopy that can be opened with a hex key or a special “star” key (depending on the model of the plastic structure itself).
2. Turn the screw a couple of turns to the right.
3. If the sash still touches the threshold, remove the protective cap from the bottom hinge.
4. Find the adjustment screw and also turn it to the right a couple of times.

If the door hits the frame in the middle, do the following:

1. Use a wrench to turn the lower adjustment screw, which is located on the side, on the inside. 2-3 turns are enough. This will move the sash towards the hinge.
2. If the door does not close well, repeat the procedure, but this time on the upper canopy.

Horizontal adjustment. Step by step description

Sometimes it becomes necessary to adjust the position of the door, for example, move it a little to the right or left. For this:

1. Open the door and remove the screws from the top hinges. Use a 6-blade screwdriver.
2. After closing the door, remove the linings behind which the screws are hidden for debugging the mechanism.
3. Twist them: in the top loop more tightly, in the bottom - a little looser. This way you will prevent the structure from skewing.
4. If you need to move the door evenly towards the awnings or, conversely, away from them, remove the trim from the bottom hinge.
5. Tighten it and slightly loosen all the screws that are located horizontally in the awnings.

Attention! By turning the screws clockwise, you will move the door towards the hinges, by turning it counterclockwise, you will slightly move the door in the opposite direction. In this way, it is possible to correct the movement of the structure within 2 mm.

Vertical adjustment. Briefing

If the door needs to be lowered or raised slightly, make vertical adjustments to the mechanism.

1. Locate the adjustment screw at the bottom end of the canopy. It is located along the hinge axis. Sometimes the screw is hidden by a plug that needs to be removed.
2. Turn the adjusting screw to the right if the door needs to be raised, and to the left if it needs to be lowered. A hex screwdriver is again suitable for this, and the lifting height can also be adjusted up to 2 mm.

Advice. To avoid having to adjust the door so often, install an opening limiter and a microlift on it, which supports the door when it is closed and prevents sagging.

Adjusting the balcony door: video

In most apartments, the layout provides space for a balcony - even if it is not always used correctly, it is at least possible to store a mountain of old things there. But what to do if the plastic balcony door sagged, how to adjust it? Such issues have to be resolved independently, which means that this requires some kind of scheme.

Is it possible to solve the problem on your own?

In fact, in most cases it depends on the type of problem that has arisen. That is, the question that concerns you will not be “How to adjust a plastic balcony door?”, but “Why doesn’t it close?”

Almost every happy owner of a balcony faces such problems - metal-plastic doors can become unusable over time. This is mainly due to the sagging of the hinges under the door's own weight. So now you will learn how to properly adjust a plastic balcony door, while avoiding many unpleasant problems in the future.

Why don't the doors close?

First you will need to answer this question, and you can start working later. As mentioned earlier, a common cause may be the door sagging under its own weight, but this is not the only reason.

The balcony is exposed to climatic and temperature influences, and therefore the fitting hinges may become unusable. If this is exactly what happened, then you will have to look for the answer to the old question: “How to adjust a plastic balcony door?”, because it is the adjustment in this case that will help solve the problem.

Diagnosis of the problem

• The balcony door may touch the threshold - in this case, you must make great efforts to close it, lifting it by the handle. Here the problem most often occurs in the hinges - metal-plastic structures in general often suffer from such problems. However, balcony doors are prone to such unpleasant incidents more often, which is logical, given their dimensions.
• Also, the door can cling to the middle part, which will indicate the deformation of the mechanism - it takes the shape of a “barrel”. Sagging hinges may also be involved here, but more often the cause is thermal deformation of the mechanism.
• If your door does not close completely, then you will have to ask a slightly different question: “How to adjust the pressure of a plastic balcony door?” It is the clamping mechanism that will be the problem.

In some cases, mechanical damage to the lock or door handle occurs. In this case, you will simply need to replace this part yourself.

Tools required for work

As with any repair work, you can’t get by with improvised means; it’s best to have a real set of tools on hand (however, every second man has one today). Here are the tools you'll definitely need:

1. Wide flat head screwdriver.
2. Crosshead screwdriver.
3. Pliers (it is better to have round nose pliers on hand).

In addition, you will need to select adjusting wrenches that fit exactly the adjusting screws on your doors. Such information can be obtained either by self-inspection or on the manufacturer’s website.

How to eliminate sagging?

If the problem found is caused precisely by sagging hinges, then solving it is quite simple - you just need to pull the upper corner of the sash to “your” hinge. It sounds like you have a lot of hard work ahead of you, but it's not. The door just needs to be lifted. But in order to avoid problems, you are given an answer to the question of how to adjust a plastic balcony door with a diagram and a certain procedure:

• The first step is to install the door in a pivoting position.
• The second step is to turn the screws on the top sash (they should be near the hinge). You need to turn clockwise, since you need to pull the sash to the hinge, and not vice versa, to release the pressure.

The third step is to lift the door itself. To do this, you need to use the lower screws - they are also located on the sash. The screws on the end are turned until the door stops clinging to the threshold.

The door should open and close easily, without any effort. When checking, light pressure on the handle should be enough - if so, then you did everything absolutely correctly.

How is sash displacement eliminated?

This is the second most common problem with balcony doors. In this case, the door will cling to the middle part, and therefore it must be moved closer to the hinges.

For most metal-plastic doors, this can be done without removing the entire door from its hinges - routine repairs are provided for by the design.

• Door adjustment begins with the bottom screw. It is located near the bottom hinge: you turn it with an adjusting key until the door is in place.
• The same procedure is repeated with the top screw. As a result, you should get a straight door.

This may not solve the problem, for example, the hinges may be completely deformed, or even with fine adjustment, the door continues to cling in the middle part. In this case, you should contact the manufacturer or installation company - the latter often introduce such problems in cases with free repairs.

How to eliminate blowing?

In addition to the two already described reasons for all problems, there is one more - no less common, but considered more a consequence than a cause of the problem. The third situation that requires your intervention is blowing under the balcony door. This can occur when the door, in the closed position, is not tightly pressed against the frame, leaving a gap between them - often imperceptible, but sometimes quite material. So here is a diagram of how to adjust a plastic balcony door that is blowing:

• You can adjust the pressing of the door to the frame from the lock side either with an adjusting key or with pliers - you just need to rotate the pins that lock the elements.
• On the side of the hinges, in turn, the pressure is strengthened by attracting the hinges to the frame (how this is done was described above).

Conclusion

By now you should have realized that you can fix problems such as sagging hinges, misaligned sashes or blowing on your own. The main thing here is to remember that each company makes balcony doors according to its own design, and therefore this must be treated with the utmost attention. However, the principle remains the same for everyone. So, we found out how to adjust the Rehau plastic balcony door.

Often, when installing PVC balcony doors, technical problems arise related to the operation of the opening mechanisms and other structural elements. This is due to many factors: violation of installation technology, shrinkage of the building, improper operation of the door. To eliminate minor faults, you can do it yourself - just adjust the plastic door correctly, following the step-by-step instructions.

Common causes of PVC door malfunctions

Adjustment of plastic doors is carried out immediately if visual structural defects are detected in the following situations:

Violation of the tightness of the door structure

You can recognize the malfunction in this way. Open the door and insert a piece of paper into the space between the frame and the door leaf. Then close the canvas and try to pull the sheet towards you. The paper is pulled out without effort when the closing mechanism is not pressed sufficiently. Similar actions are performed along the entire perimeter of the structure. Failure of the door seal leads to the appearance of condensation on the glass surfaces.

Sagging and warping of the door

Determining the subsidence of the canvas is quite simple - outline the closed sash with a pencil. If in the open position the control line runs parallel to the frame, this indicates that there are no distortions. In some cases, door sagging can be determined by the formation of a through corner gap at the top of the structure or friction of the lower part of the door leaf against the threshold.

Friction on the door frame

Difficulties in opening and closing the canvas appear as a result of friction against the box. This is due to wear of the upper protective layer of the door, which can lead to damage to the metal-plastic profile and incorrect operation of the fittings.

Looseness or difficulty turning the handle

The door handle may become loose due to insufficient fixation in the seat. The reason for this may be incorrect or careless operation of the fittings.

Another problem is a tight turn of the handle, which occurs as a result of damage or contamination of the lock core or the handle itself.

Incorrect operation of the locking mechanism

This occurs due to contamination, wear or breakdown of the mechanism.

Such malfunctions indicate that the PVC door to the balcony is in poor technical condition and requires immediate adjustment.

The process of setting up a plastic door

Adjusting plastic doors involves identifying and eliminating all existing faults. Perhaps the fittings or individual structural elements are very worn out, so the problem can only be solved by completely replacing them.

Let's consider the most likely breakdowns of the entrance balcony door, which you can fix yourself.

Working tools for setup

Depending on the standard size of the regulating and fixing structural elements, as well as the manufacturer, the following working tools will be required to set up the locking mechanisms:

• a set of hexagons of various diameters;
• set of star keys;
• flathead and Phillips head screwdrivers;
• pliers;
• plastic linings;
• means for lubricating sealing tapes;
• clean rags.

Adjusting door hinges and awnings

Metal-plastic doors are equipped with hidden overhead hinges, the number of which depends on the functional and technical features of the model. The hinges are adjusted horizontally and vertically.

You can adjust the hinges horizontally as follows:

1. Open the door leaf and unscrew the screws from the hinges located at the top. To unscrew the screws, you can use a hex wrench of a suitable diameter.
2. Then close the door and remove the decorative strips that are designed to hide the adjustment screws.
3. To prevent possible distortion of the blade, the elongated screw at the top must be tightened more than at the bottom.
4. To evenly move the canvas towards the hinges or in the opposite direction, you need to remove the lower decorative strip, tighten the hinge and loosen the screws located horizontally.

Vertical adjustment of the hinges is carried out to raise or lower the door. To do this, you need to find an adjusting screw, which is located at the bottom end of the hinge along the axis. In some product models, such an element may be hidden under a decorative overlay.

To adjust the door leaf vertically, a hexagon with a diameter of 5 mm is used. Using a clockwise rotation with the key, slightly lift the blade and set it in the desired position. Next, tighten the screw in the opposite direction and install the decorative strip.

Door handle customization

Often, the problem with the handle for a plastic door is associated with its loosening in the seat and tight turning when opening/closing the door leaf.

Adjusting the handle when it is loosened is carried out as follows:

1. The plastic cap at the base of the handle rotates 90 degrees.
2. Hidden screws are tightened with a Phillips screwdriver so as not to damage the handle body.
3. The functionality of the fittings is checked.

The tight movement of the handle may be due to the skew of the door leaf or a breakdown of the locking mechanism. After troubleshooting the door position, the locking mechanism will work properly, otherwise it will need to be replaced.

If necessary, a faulty handle can also be replaced. To do this, it is installed in the “open” position, the screws are unscrewed from their seats, and the entire lock is dismantled. The new handle is installed on the seat and secured with screws.

Replacing the sealing tape

If the door structure is used for a long time with sagging or distortion, this can lead to deformation or damage to the sealing tape.

A high-quality seal can be used for 5-7 years, but as a result of mechanical damage or door malfunctions, its wear may occur much earlier.

To replace the sealing tape for a plastic door you will need: scissors, new tape, silicone glue. The sequence of actions is as follows:

1. Carefully dismantle the old seal using improvised means and purchase a new product. It is better to choose sealing tape from one manufacturer to ensure maximum sealing of the structure.
2. After dismantling, the grooves are thoroughly cleaned to remove adhesive residues and dirt.
3. To avoid displacement of the seal, a thin layer of silicone adhesive is applied to the corners.
4. The prepared sealant is evenly placed in the cleaned groove, starting from the place where the old tape was fixed. In this case, sagging, tension or bunching of the material should be avoided.
5. The joints are fixed closely, sometimes a cut is made at 45 degrees.
6. A properly installed seal should completely prevent the penetration of cold from the balcony.

Leveling and tightening in height

To tighten the door structure in height and eliminate friction on the threshold, you need to tighten the vertical adjustment screw.

The sequence of actions is as follows:

1. For the adjusting screw, use a hexagon or a wrench with an asterisk attachment. Decorative overlays are removed from the hinges.
2. The door leaf opens to gain access to the adjustment elements.
3. The upper screw in the hinge is tightened with a hexagon clockwise, maintaining a strictly vertical position of the sash.
4. If the shift is significant, the lower screw is adjusted. It is important to remember that to raise the door, tighten the screws clockwise, and to lower it, counterclockwise.

You can align the plastic door horizontally so that it stops looping using adjustment screws, which are hidden under the technological holes in the hinges. To ensure easy access to them, the door leaf must be kept open.

When the door is shifted to the right side, the adjusting element is tightened counterclockwise, when shifted to the left side, it is tightened clockwise. Thus, you can adjust the position of the door in the horizontal plane in the range from 2 to 4 mm.

In some cases, the door adjustment is carried out as follows: a special tongue is pressed at the end of the open door leaf to switch the structure to micro-ventilation mode. This allows easy access to the adjustment screws on the top hinge. After adjustment, the door leaf returns to its original position.

Other door problems

If the door has seriously sagged and other troubleshooting methods have not given the desired result, then it is necessary to carry out minor repairs using double-glazed windows:

1. The glazing beads holding the glass unit are dismantled.
2. Using a special blade made of plastic or wood, the glass unit is moved to the side to eliminate sagging of the door leaf.
3. Plastic spacers are installed in the resulting gap.
4. Next, the door location is checked and the beads are installed.

In some cases, a malfunction of a plastic door is associated with a broken lock. If a separate part of the mechanism fails, it is enough to replace it with a new element purchased at a specialized retail outlet. If the entire lock breaks down, the device will need to be completely replaced.

Prevention of malfunctions of plastic doors

To avoid costly repairs of PVC doors, it is necessary to ensure timely maintenance of the fittings and locking mechanisms of the structure.

High-quality door hardware from European manufacturers can withstand maximum loads of up to 130 kg, while the tensile strength of products from Chinese brands does not exceed 90 kg.

To ensure uninterrupted operation of plastic doors, two elements allow you to ensure the uninterrupted operation of plastic doors - an opening limiter and a microlift, which are not included in the standard package of the product. Therefore, it is recommended to purchase them separately before installing the door structure.

A limiter is a special comb that is designed to limit the opening of the door leaf. This prevents possible sagging or distortion of the canvas.

Microlift is a device in the form of a movable plate or roller, which is intended for large and voluminous plastic doors equipped with heavy double-glazed windows. The microlift prevents the door leaf from sagging when it is closed, taking on part of the weight of the door.

Any home craftsman should be able to solve problems with minor faults in a plastic door. Similar designs are used for balconies, loggias, winter greenhouses and summer kitchens. Self-adjustment will allow you to correctly set the “winter” and “summer” operating modes, saving money on door maintenance and repairs.

To adjust a sagging or poorly closing plastic entrance door, just arm yourself with these instructions and two hexagons 4 mm and 6 mm. You won't need any other tools to adjust the hinges yourself.

It was no coincidence that when mentioning the door repair, the repair of the hinge group was mentioned. It is by changing the degree of pressure, raising or lowering the hinge that you can eliminate the most seemingly serious problems with a PVC door on which façade adjustable hinges are installed.

Not every façade hinge can be adjusted, however, most reputable manufacturers: Dr Hahn, Roto, Geze, VBH - these and some other hinge manufacturers supply their products with adjusting screws so that door structures can be serviced or the degree of pressure can be changed door leaf to frame.

Fundamentally, all actions come down to a few simple operations. The essence of which is to loosen or strengthen the pressure of the adjusting screw in the loop. Depending on the direction in which the door leaf needs to be moved relative to the frame frame, either the hinge on the frame or on the door leaf is adjusted.

Adjusting doors with Roto hinges

Doorline hinges from Roto are among the easily adjustable façade hinges with precise pressure adjustment.

Instructions for adjusting Roto DOORLINE hinges

Adjusting doors with Dr Hahn hinges

A manufacturer of German locks, handles and other elements for doors and windows, the Dr. Hahn company strongly recommends not trusting door adjustments to unqualified persons to avoid damage.

Remember: when adjusting façade hinges with your own hands, you bear full responsibility for the performance of the structure and for injuries and injuries incurred during independent repairs.

Adjustment of doors with VBH and SIKU hinges

Correct diagnosis of a breakdown is the first step towards solving the problem with a plastic door. After this, you can align the door leaf in the desired plane in 15 minutes.

A person who understands the fittings and features of PVC structures will be able to quickly and efficiently repair the problem using the instructions given above.