How to repaint old lining inside a house. Self-painting of lining: step-by-step algorithm of work

Natural wood- what could be better? In addition, the majority have already enjoyed plastic and wallpaper so much that they decided to switch to environmentally friendly pure material. Moreover, naturalness has come into fashion. How to paint lining- a question that interests many. You need to be very careful when buying the right paint, because wrong option could ruin the whole job. Therefore, it is not at all strange that lining occupies a leading place in terms of prices, but strangely enough, almost everyone dreams of such material. Yes and the cost directly depends on the type of wood. If you decide to cover the walls with clapboard or you already have them made from this material, then the question is: how to paint lining will become itself. Wall decoration made from this material can be done both outside and inside the house.. But many builders and designers prefer the second option.

Wooden facade - this is certainly very beautiful, and it looks rich, but do not forget that wood is susceptible to influence like no other environment and various precipitations. And this one high humidity has a very bad effect on her. This raises a completely logical question: why is it necessary to paint the lining indoors? There is no snow, no rain, no other weather precipitation there. Of course, there are cases when the wood is not painted, but left in its natural appearance. Undoubtedly, wood has its own specific design, color, pattern, in addition to this, it always looks perfect everywhere, but painting is still necessary.

Why does the lining need painting?

1. This material is sheet wood, and it ignites very quickly. Naturally, not even one expensive coverage will not give a hundred percent guarantee against fire, but there are special protective compounds, or as they are also called fire retardants. They greatly increase the protection of the material.

2. Any natural material later certain time begins to deteriorate, that is, to rot. Antiseptics help prevent this process or slow it down. It is impossible to get rid of wood rot forever. The lining does not need to be painted, but it is simply necessary to use an antiseptic.

3. These coatings serve to protect against any damage. Placed in a thick layer on the wood, it takes the entire blow and does not allow the intruder to get to the material itself.

4. Wood darkens when exposed to the sun., and does not brighten, as one might expect. This is why protective coatings repel the sun's rays and thus preserve the natural shade of the wood.

5. The attractiveness of the lining. Clear varnishes not only add shine to the wood, but also tint it a little. In addition, there are paints that radically change the color of the material, if you need it.

What materials are there for painting lining?

So that the wood after painting has beautiful colour, before the procedure itself, the paint must be thoroughly mixed. To the question - what is the best product for painting? There is simply no clear answer. After all, choosing the right one depends entirely on what exactly you want to achieve. If your goal is to protect the lining from various pests, then it will be enough a simple antiseptic. If you want to add shine, you need to apply varnish. If you create a lining of a certain shade, then the coatings for decoration will be just right. Today there are enough in construction stores big choice funds for different coatings and impregnation. Purely theoretically, they can be divided into two groups: means for protection and for decoration.

Protective means.

As already mentioned, the most popular are fire retardants, they keep wood from fire. But most quality option is factory processing, because it is done under enormous pressure. Processing it yourself will not create the desired result. Before painting wood, it must be treated with an antiseptic to protect it from insects and rot. An antiseptic is a drug that destroys various bacteria and also prevents their active reproduction. Many people use only them. When purchasing these products, pay attention to the type of substance. The packaging must indicate - for interior work. If you want to protect the wood without changing its shade, then this perfect option.

Another way is acrylic varnish. It is made for protection and decoration at the same time. It can be tinted. There is an option - first apply a transparent varnish, and then a product with the right shade, in this situation, the pattern and texture of the wood will not change. If construction material in the house is located in a room where residents are not always located, for example, a balcony. You can always use synthetic varnish. True, it includes chemical substances, which, as research shows, are harmful to humans. But this product goes on very smoothly and gives the lining a shine. He has excellent competition wax products. They give very beautiful shade matte, and at the same time protect the wood from pests. But they have The main disadvantage is that they are very difficult to apply.

Coverings for decoration. Oil-based paint is perfectly absorbed into the lining. Does not allow water to pass through, but after a short amount of time it loses its color. Painted lining using such a coating means that the natural color of the wood will not be visible. They are suitable for further coatings, because the original natural shade should not be hidden. Over time, the lining darkens. And most people just want to change something in their home, so they resort to such paintings. Designers advise not to paint wood in dark color, since the relief will be completely lost, but it will be possible to paint it in bed colors excellent option.

Oil paint occupies a leading position. For a long time is in the building materials arena. She hits it perfectly upper layer lining, protects it well from water. At the same time, the shade does not fade. The disadvantages of this product include: long drying and very rich persistent odor . It cannot be applied in the cold season, because there is no way to ventilate the area well. If painted lining oil paint, then she will no longer be able to breathe normally. All these disadvantages were taken into account by the manufacturers, and they released another model - acrylate. It dries very quickly and is not characterized by such long-lasting chemical smell. The paint is very long time retains its color and shine, is very elastic and vapor-tight. This suggests that even when exposed to severe frosts or large exposure to the sun, the surface will not crack. The color and shine do not change even when exposed to harmful rays. Her main minus - the price is much higher than oil. Acrylic lacquer made specifically for internal treatments, because it is non-toxic, does not harm people, and is suitable for children's premises. If you only dream of changing the shade of wood, then good option there will be stain.

TOwhat kind of insAre tools necessary for painting lining?

You will need: gloves, stepladder, bucket, fine and medium sandpaper, spray gun, work clothes, brushes the right size, metal brush, small container, primer, wood bleach (may not be useful), substance for painting.

Initial wood preparation

Before painting the wood, it must be treated to remove any dirt; if this is not done, the paint will flake off. Of course, the entire process of preparing the surface before painting depends on what materials and products you have chosen. Preparatory processes can be divided into 2 types: painting new wood and re-painting. If you purchase lining, then choose one that has already been treated with an antiseptic. As already mentioned, the factory method is much better than the home method. If there is no antiseptic on the lining, first of all clean it from excess garbage. Only then apply a layer of product.

Most suitable option- This deep penetration agent. Afterwards you need to wait the required time specified in the instructions and you can paint the surface. If the lining is recently purchased, then it is better to treat it before installation, since in this case it will be fully protected. If the wood is old and has already been painted, then you need to remove the paint layer with a wire brush. You just need to do this carefully so that the lining is not damaged. If cracks occur, the top layer will have to be treated. There are times when, after removing the previous paint, darkening of the wood is discovered; bleaching agents are used to remove it. If they are unable to cope, then you should use stain to lighten them. After completing this work, it is necessary to apply antiseptic primer. It is applied to the surface with an even shade; if the wood was made lighter, then the lining can be coated with a primer only after it has completely dried. But before applying it, the surface must be sanded with fine sandpaper. And only after it has completely dried you need to start applying the paint itself.

1. Each type of coloring agent requires a certain number of layers, often 1-2. But this information need to check with the store.

2. Don't use a thick layer. It will blur one hundred percent, and the service life of this coating is not long. It is better to paint in several thin layers rather than one large one.

3. When applied various means the brush should move along the surface without leaving it. You should not press on it with great force; it is enough so that only the tips of the fibers come into contact with the lining.

4. Immediately prepare thin brushes for hard-to-reach areas.

5. In addition to a brush, you can use a paint roller; it will definitely not leave any lint on the lining.

How is lining painted? This real secret. Unfortunately, few people know how this process works. When wondering how to paint the lining inside a house, I want to give an answer: you need paint. But which one? How to choose it correctly?

The lining can be painted with a special varnish intended for wood

In fact, there is more than enough wood for such a product. They cover both the outside of the house and get to the room walls. Loggias can also be covered. When finishing walls with clapboard, you will ensure that their service life increases significantly.

Thanks to this material, the house remains warm, there is no humidity, there is nice smell wood, excellent sound insulation. But it is affected by natural adversities, including precipitation and sun; wood is especially susceptible to problems due to temperature changes.

Therefore, painting the lining is important. What kind of wood is needed for lining? It is best to choose pine, it has its own beautiful appearance

, she is golden by nature. But time passes and the color darkens. Therefore, it is important to choose the right means for coloring it.

Choosing a coloring agent

• Painting of the lining is carried out using:
• oil paints;
• acrylic paints;
• acrylic aqualacs and alkyd paints and varnishes;

antiseptic.

The lining can be coated with oil paint, which is suitable for both interior and exterior use.

Paint for lining can be oil-based, as we noted. It absorbs perfectly into the wood. Moisture usually does not pass through it; precipitation is not a problem for oil paint on the street. But the color may fade over time; another drawback is that it takes a long time to dry. Therefore, if the material was covered with dark paint, it will quickly fade.

As for acrylic paint, it also withstands all precipitation well, but its color does not fade over time. In addition, the surface will not lose its ability to pass air. Such paints allow steam to pass through, have elastic properties, and do not crack.

Scuba tanks are usually used inside the dacha. After all, they are environmentally friendly and hypoallergenic. Alkyd varnish is used for painting floors, since the coating material is hard and can withstand heavy loads. True, after ten years, wood coated with such a paint and varnish material will need to be repainted.

How to paint inside rooms Take the right tool

• . Namely:
• paint tray;
• bucket;
• primer, varnish and paint for lining;
• brush, roller or spray gun;
• grinder or pumice;
• ladder;

To paint lining you need to purchase a number of tools

Coloring is carried out gradually:

1. Remove first old paint and clean the wood from dirt and wipe off dust. Otherwise new layer It will peel off quickly and then you will have to do everything again. If the surface is very dirty, then take three hundred grams of soda in a bucket of water. Wash with this solution. Degrease the paint with detergents made with alkali.
2. The next step is to sand the surface.
3. Next, you need to apply an antiseptic made on the basis of a primer. This step is not mandatory, but thanks to it you will achieve greater efficiency and durability. This is due to the fact that wood tends to secrete resin.
4. Finally, we paint the surface. Use a roller to apply the product to the surface. Also take a brush or spray gun. When you get to final painting, then do it from top to bottom.

How to paint the lining inside the house? To do this you need to make three passes. First a thin layer, which must harden completely. Then the next layer, which needs to be no more than a millimeter thick. Once it dries, you can apply a third coat as needed. As you can see, it is better to apply thin layers in several approaches than to immediately paint several millimeters thick. To ensure that the brush is not visible, you need to paint from top to bottom.

In order not to make a mistake in the color of the paint, it must be tested

Before applying the paint, it must be mixed thoroughly. Then the color will be more saturated and the shine will be even. Test on a small piece before painting. This will make it clear that the color is chosen correctly. It is better to apply the paint in a thin layer and with a brush.

If on wooden material There is metal elements, then put on mittens made of chicken wool, if necessary, then turn them fur side up. Then in a few minutes you can paint more than five meters of pipes. The primer is applied so that its color and varnish match.

If you are painting outside, then choose a calm, warm day when the sun is shining. But it shouldn't be too hot. Only in these conditions it is necessary to paint. The ends of the lining need to be thoroughly processed. For this purpose, they need to be coated with a primer liquid, and then use varnish. If the paint is covered with a film, place nylon material in the jar. The brush must be dipped using this material.

If you do not need speed when drying the paint and varnish material, then place a thick layer of paper on top of the painted surface and fill it with drying oil. To collect the remaining paint on the can, take an iron and scrape it off.

If you need to cover a painted surface while the paint is still wet, place a piece of foil where the surface touches another painted surface. After drying, remove it; you will not see any damage to the painted surface. Using these recommendations you will not lose good view for a long time.

How to properly process lining indoors

Before painting, the lining must be treated with an antiseptic

It has become fashionable to decorate the inside of a house with wood material. But how to do it right? It is important to remember that painting the lining inside the house should be done wisely. Lining is a worthy competition for finishing an apartment. But how to process it? First you need to dry it thoroughly and sand it. Then the paint or varnish will lie smoothly.

We impregnate the wood with antiseptic preparations. Then there will be no mold, no black spots will appear, and no insects will appear. Once the impregnation is complete, let the wood dry thoroughly. Only after this procedure can you treat it with paint or varnish.

Use stain. This will add vibrancy to the color. The wall becomes magnificently decorated. For the appearance of dark or light shade, which can give color, use different layers of stain.

Wood material is processed indoors when varnish is used. If you have not treated the wood with anything before, then apply several layers, giving each one a chance to dry thoroughly. Can also be treated with wax. Since it can perfectly saturate the wood, you will get shine, and if you apply varnish on top, you will get a generally beautiful color. So choose.

If it’s difficult for you to think about how to cover wood material and you don’t have time to dry it, then pick up a necessary compositions. Then you will be asked to coat the wood with an antiseptic, and then cover it with glaze. Then, if necessary, open it again using varnish.

Use materials that contain oil and wax in in kind. It is better to use coniferous wood indoors. Cover it with varnish and that's it! The lining will serve you for a long time. In order to protect wood from aging, water, humidity, and fungus, take only high-quality varnish. Then there will be no consequences of poor-quality coating.

Before painting the lining, it is necessary to complete all preparatory work

If the balcony has become part of the living room, then first clean the lining from dirt. To do this, take a steel-based brush. Clean away mildew and mold using wood bleach. Cover the wood with stain. This way you can lighten the lining. Use a brush or roller. Finally, prime the surface. After the lining has dried, coat it with an antiseptic, which has a transparent tint.

If you decide to place the lining in the bathhouse on the walls, then take hardwood tree. As an example, take alder, linden, and aspen. At the same time, resin does not emit from such wood, so it does not heat up so quickly, and is also more protected from moisture. When you choose wood for the lining, and the lining itself along with protective coatings, consider all these tips. Then wall treatment will become easy and will lead to long-term results. If you need to cover the floor in the bathhouse with clapboard, then open it with varnish and add White Spirit.

What is used to cover the lining

Use the glaze, take the impregnation and various paints. To protect the surface, use an antiseptic. They can be either opaque or translucent. Also consider oil and acrylic paint and alkyd varnish.

Any antiseptic is freely absorbed by wood. It extends several millimeters deep into the wood. Therefore, the lining will be protected from sun rays, blue. She is not afraid of mold, rot, precipitation. If you want to preserve the wood texture or the beauty of the wood, then take a translucent antiseptic. If you want to completely get rid of the wood pattern, then take an opaque antiseptic.

You need to choose the right paint. Then the interior will not be spoiled. As an example, oil paint applied to walls stands out and dries very quickly. Thanks to it, moisture does not accumulate, but, unfortunately, it can change colors. As for acrylic paints, they are better in every respect. In particular, one of the main positive reasons to choose it is that it does not spread.

An example of saving on paint and varnish material is aqua paint. Take advantage of it. There is a whole range of colors and their shades. The paint is economical and environmentally friendly.

For the ceiling, also take a lining and use aqualak for painting. First, try covering part of the ceiling with it and see how it turns out. The layers should be thin. Use a brush. This product is also suitable for painting floors. Just start by covering it with water-repellent oil; it should also be anti-slip. When the floor is dry, paint it.

To paint walls and ceilings, first treat the surface with an antiseptic. Then take a special impregnation. Then the material will be protected from fire. After this, open the wall with varnish, you can use paint.

It is also possible to paint the lining with glazed paint. Blur the paint or traditionally cover the surface of the walls and ceiling with decorative glaze, or use texture to create a metallic effect. Also create drawings and patterns. Thanks to the glaze you get a glossy shine. In this case, stains and damage do not appear.

In the end, I would like to note that painting the lining indoors is carried out using oil paint. It is possible to use acrylic paint. Open the walls with varnish. It’s just important to remember that you need to apply several thin layers, and not one thick one, which will take a very long time to dry.

This is the case when, when answering the question of how to paint the lining inside the house, a sacramental and not without irritability answer will follow - nothing! This is not why lining is used when decorating the interior, so that later it can also be painted.

But still, emotions aside, let's try to understand the reasons for this violation. Fortunately, there are enough materials and the technologies are fully developed.

Only if there is nothing else left

So, let’s immediately present the process of a clapboard house:

• you have carefully thought through the entire design of the room and decided that the lining on the walls is what will be necessary to beautifully complete the entire ensemble;
• prepared reliable frame, behind which lies both double waterproofing and insulation;
• ideal, proven stainless steel fasteners have been selected;
• only lining of “Extra” or “A” quality is selected and, very preferably, a light color;
• the clapboard wood must be linden or ash;
• the wood is carefully, as required by the instructions, dried and treated with an antiseptic, which the buyer personally verified, including on numerous examples of the use of lining from this supplier;
• if the lining panels have special tongue-and-groove connections, then all connections have been thoroughly checked for reliability and strength, all connections should not have the slightest cracks;

• in compliance with all technologies;
• upon completion, the material is very carefully sanded and coated with a colorless, preferably matte, varnish.

All. And where might there be a desire to paint the lining inside the house? Perhaps another task was simply confused than to paint the lining inside the bathhouse. Well, it's two big differences, as they say in Odessa.

The laid lining always looks great on its own and there is no need to interfere with it. It also looks ugly, like thick female makeup in hot weather somewhere on the Yalta embankment among those walking in shorts and bikinis.

No, I’ll hide it, but it’s probably already become clear to everyone that the author is against thoughtless painting of lining. Although we know how to make compromises and take situations into account.

Accounting for situations

Among these situations, there is an understanding that we all walk under God, and no one can avoid mistakes.

That’s when the need suddenly arises to pick up paint while standing in front of the paneling:

• you unsuccessfully, without thinking, chose the quality of the lining; your choice turned out to be no higher than quality “B”, and this is an uneven color and too many knots (in in this case allowed up to 4 by one and a half linear meters), as a result - poor appearance and too rapid deterioration of wood (and knots are a favorite place for insects and moisture);

• you have to resort to painting to get rid of stains and streaks,
• or get rid of damage, prime it, which means you must then paint it;

• you haven’t thought through the design of the room at all - the walls have their own wedding, the furniture and curtains have their own;

• then, by adjusting the color of the lining, you can paint it;

• on the contrary, you are a fan of Whistler and deliberately chose a “symphony in white” in the room, in memory of this brilliant English artist; but it is impossible to select such a lining;

• Without forgetting about quality, we still resort to painting, which was done brilliantly in one of our examples; Note that a wider lining was chosen here very cleverly; a narrow one would have looked much worse;

• you didn’t use waterproofing on the walls and it began to become hopelessly damp, which also affected the lining; it had to be put in order;

• and this means drying, antiseptic treatment, priming and painting (although do not forget about the root causes of the whole action);

What do we choose?

Fortunately, the materials for correction were thought out in advance.

At our disposal:

• Bactericidal compounds. Based on the use of protective additives, they must be marked “for interior use.” This material is usually colorless, but unfortunately causes the surface to darken over time.
• Acrylic varnishes on water based - Very good material, perhaps the best of all possible. This varnish has both a decorative and protective function. It can be colorless, but adding tint allows you to get varnish of any color.
• Synthetic varnishes. These give the surface more shine, they provide greater smoothness of the surface, but synthetics are not without sin - they are often toxic, and therefore not for the interior.
• Wax-based compositions. Wax, perhaps even preferable to varnish, gives the surface a matte appearance. But due to the too labor-intensive application technology, wax is not used so often, but in vain, and its protective properties and environmental friendliness are much higher.
• Oil paints. This is already for fundamental change the colors of the lining itself. If this is your goal, then choose this option. Otherwise, it will fulfill its task perfectly - the protection will be first-class. But keep in mind that the wood will practically not “breathe”, it will lose its original color over time, and the paint will take a week to dry, no less.
• Acrylic paints . These solve all the problems of "oil" with the exception of one - they are much more expensive. There is one very useful additional advantage - acrylate is very elastic and you will not see cracks on surfaces coated with this paint - a significant plus for the interior.
• Acrylic scuba tanks. Many people consider this material best choice from the point of view of the “price – quality – safety” ratio.

Helpful advice!
When you have already decided on the choice of material with which you will paint the lining, be sure to conduct a little market research.
Prices for materials can vary significantly, but the same cannot be said about their quality.
Yes, the price acrylate paints can be divided into three ranges: small – up to 100 rubles/kg; average – from 100 to 300; and the most expensive - over 300, which is the difference between almost all imported samples.

Work progress

We present the progress of the work from the very beginning, assuming that the surface was previously painted and subsequently damaged.

Full cycle

When painting the lining, and even for the purpose of restoring it, you will need to do the following e:

• We carefully check all places of damage and cracks - after removing even signs of dampness and damage, everything must be primed, for which it is best to use the original primer of the paint manufacturer;
• dry the entire surface;
• carefully clean everything with sandpaper;
• remove dust;

• Next, we apply a primer to the entire surface - in this situation, some recommend applying two layers of primer, but as practice shows, this is not necessary;
• But don’t be too lazy to apply two layers of base paint;
• and the first layer should be thicker;
• wait 3-4 days for drying;
• and the second layer;
• We are waiting again, but already 7 days;
• Upon completion, you can cover the surface with varnish, although this depends on the situation and is not at all necessary.

Helpful advice!
If painting is undertaken to restore damage, we strongly recommend that you first strengthen these areas with non-woven tape 5-10 cm wide.
The tape is placed on a layer of primer that has not yet dried and is also primed on top.

conclusions

No, of course, painting in many cases is a saving material, and here to say “cheap and cheerful” does not at all add a smell of ill will to this material. , unfortunately, is often a necessary measure to correct our mistakes. But nothing can be done, the job has already been done, and why “cry,” “Moscow doesn’t believe in tears.”

Go ahead, correct the situation, and the more smiles on your face, the more willing you are to get to work, the better it will be for everyone, business in the first place. Be sure to watch the video in this article, it will not disappoint you, it was sincerely made by people who want to help you in this process of mixing God's gift and scrambled eggs.

If you have achieved your dream and purchased country house, it means you love nature, silence and prefer natural products and natural materials.

When arranging your “nest,” you most likely need to pay attention to the material that will be used.

Environmentally clean place It is better to use the appropriate material - wood, and therefore lining. And the question “how to paint the lining inside a country house” becomes relevant.

Indeed, for interiors, wooden lining is simply necessary - this is a natural building material with which you can eliminate any unevenness in the walls and ceiling. She has aesthetic appearance and reliable in operation.

The facing material made from various tree species:

• Conifers (pine, larch, cedar);
• Linden;
• Alder;
• Aspen.

Products made from larch, alder, aspen and linden are most often used for indoor and saunas; oak is expensive decorative tree and products made from it are not cheap.

Pine is the most suitable timber for the production of the product under discussion, intended for interior work in private homes.

It also has a varietal classification: “A”, “B”, “C”, depending on the quality of the forest from which it is produced.

Pre-treatment before use

Preparation plays a big role in the durability of a presentable material, regardless of the coating (varnish, paint).

If products of grade B or C are purchased, with big amount knots and shells, it is better to cover them with paint. But first you need to clean the burrs with fine sandpaper and putty all the flaws in the structure.

Preliminary preparation of the material can be divided into stages:

• Cleaning contaminated surfaces from debris;
• Grinding, removal of irregularities;
• Antiseptic treatment.
• You can remove dust, dirt and debris using detergent and special soda solution(proportion with water 1:30). Sand it with regular pumice or fine sandpaper, only then can you start impregnating it with an antiseptic.

The cleaning process is very important; if it is neglected, the finishing coating may not lie evenly on the surface of the material and will spoil the aesthetic appearance.

The application of an antiseptic primer is necessary; the longevity of the lining and its appearance depend on it.

This impregnation prevents various insects, mold and ultraviolet rays from affecting this product.

Paints and their types

After opening the surface with an antiseptic, you can start painting; to do this, you need to figure it out and choose the type of paint that is best for covering the material.

• Water based paints;
• Acrylic;
• Oily.

Water-based paint coating is the most affordable. When purchasing a low-quality product, this type of coating is often used, but the wood pattern is distorted.

Acrylic painting of the product in question is perhaps the most expensive type of coating; indeed, it is not a cheap pleasure, but the price is justified. Acrylic paints do not fade in the sun, and the original color after coating remains for a long time. long years.

They do not close the wood pores, thereby allowing the timber to breathe, which has a positive effect on delamination and cracking of the lining.

Colored oil coating This product is considered by many the best option. Oil paints provide excellent protection from moisture and are resistant to various weather disasters.

They are most suitable for use in buildings without regular heating, and, like acrylic coatings, they protect the lining well during temperature changes. The price component is several times less than for acrylic paints.

But the shortcomings are significant. The main ones are fading or loss of color, so re-opening will need to be done after 2-3 years, if the cladding is indoors, then less often. Also, this type of coating takes a long time to dry, which slows down the installation process.

How to paint lining correctly

Coloring this wooden product not an easy task. It is necessary to apply a uniform thin layer to avoid dark spots, there should be three in total, at least two.

Be sure to let the lining dry after each coating.

Do not apply layers when high temperature, since the paint will not have time to properly absorb into the wood and will dry quickly, which can negatively affect durability.

All layers must be applied from top to bottom, no brush marks should be visible, and then the question is “how to paint the interior of the lining at the dacha.”

Varnish and wax coating

Varnish coating is most popular for lining used indoors, but you need to decide on the type of varnish:

Yacht varnish. In demand for wood products. It has good waterproof qualities and is inexpensive.

Alkyd varnish is a coating that, in combination with stain, is often used to reveal wooden floors, as well as wall tiles. It is recommended to coat products made of alkyd with alkyd varnish. noble wood- oak, larch. Since these varieties have sufficient hardness.

Acrylic varnish coating– this is a modern building material that is highly environmentally friendly, perfectly protects and preserves timber, does not spoil the structure of the tree, but has a fairly high price.

Paint protection is quite well known and widely used. Newer and in a labor-intensive way preserving the structure of the tree is waxing. This process takes quite a long time, but it is worth it.

Wax-impregnated cladding lasts well in a room for many years, it feels pleasant, the smell of wood and all its properties are preserved.

Video on how to perform painting work:

Therefore, after reading the article, you can decide on the lining inside the house in the country, based on both price and quality indicators.

No one will argue with the fact that wooden lining looks great in any room or interior. It should be noted that this wood material is currently popular among the available analog types. Lumber is environmentally friendly and modern, which is why it is often used to create comfort and style in your home.

For all its advantages, lining, like any other material, loses its original appearance over time, which is why you need to know what to do to ensure that it always looks like new in your interior.

Preparatory work before painting

To add freshness to the wood on the walls and ceiling, you need to paint it, but if it is already painted, you need to know how to update the color of the panels, as well as know. We will tell you how to do this right now. If there is already a layer of paint on the panel, then you will have to check how well this layer adheres to the surface. If the paint has completely peeled off in some places, it is better to get rid of it.

Preparing the painted surface

Painting old lining is a labor-intensive process that requires a lot of effort and time, because preparation work surface, which you will paint will determine the final result.

Preparation methods:

• Using a construction hair dryer. Warm up the surface to be treated and use a spatula to pry up the paint, carefully removing it from the surface. Do not forget that you need to be careful with such a device, because temperature regime It is different from a regular household hair dryer. And don't use it on ;

• Paint removal using SP-6 composition. Use this remedy It’s very simple - apply the composition to the surface and rub it with a brush until the paint layer is completely removed. If you purchase a different composition for removing paint, the instructions must be read;

• Removing a layer of paint from the surface by using foil and an iron. We cover the tree with foil and iron it at high temperature, for 30 seconds after this process, the paint will come off very easily with a regular spatula.

Important! The latter method can only be used if the lining was painted with old-style oil paint.

If the paint on the surface of the panels holds strong enough and does not have any defects, then it is necessary:

• Sand the painted surface using fine-grained sandpaper;
• It is easier to remove unnecessary pieces of paint and other elements from the surface by applying a 2% soda solution to it. To prepare this mixture, you need to dissolve 300 grams of soda in 5-6 liters of water, preferably warm - the solution is ready;
• Cover the entire surface with drying oil, this reliable protection lining from various kinds negative impacts at her.

Painting the lining inside the house can begin only after you have prepared the surface for this process, and have also figured out which one suits you best.

Painting the walls

The prepared surface for painting must dry well, and only after that can you proceed to preparing the tools and the painting composition itself.

• The main tools in this process are brushes and rollers. To make painting simple and hassle-free, you need to purchase several types of brushes and rollers, hard to reach places painted with small brushes, the main surface with large brushes and rollers;

• Don’t forget also about sponges, which will be needed throughout the entire painting process;
• Spatula and container for paint.

Remember! Individual elements very easy to paint with a tsig mitten. To do this, you need to put it on your hand with the inside out side.

If you do the painting yourself, you need to take care to protect your skin and eyes. Invest in goggles and mittens or gloves to protect yourself from harmful effects paints.

No matter how safe the paint is, if there are children or pets in the apartment or house, it is advisable to remove them from the work area or room while painting.

The design of the lining painting depends only on you. The variety of types of paints allows your imagination to run wild.

Let's start work

• Pour paint into a small bowl. The brush should be dipped in the composition so that only the lower part is in paint (example in the photo);

• You should attach the brush to the wall only after paint stops dripping from it;
• Paint carefully, without going over the already painted layer.

Many people think that there is nothing complicated about painting lining, but in fact, like any other repair process, there are some nuances and features, which we will consider below.

Rules for painting a wooden surface

• The tip of the brush should touch the lining, and not its entire surface with fibers;
• We paint the panels smoothly and slowly, painting every millimeter;
• Do not pass a second time over an area that has already been painted;
• If painting the lining at the dacha is carried out in winter period, you need to remember that the temperature in the room where the work is carried out should not be lower than 12 degrees;

Important! It is better to apply several thin layers than one thick one.

• The second layer of paint is applied from top to bottom;
• If there are metal inserts on the lining, you need to go over them with vinegar.

To understand how this process is carried out in practice, watch the video: painting wooden lining. Now let’s move on to the advice given by masters, specialists in this matter.

Master Class:

• There is no paint left in the container, and the lining has not yet been painted, no need to worry, you just need to carefully scrape off the remaining paint from the walls and bottom of the container and use it for its intended purpose. If the composition thickens, simply dilute it with warm water;
• If the paint ends up on your skin, you should not use a solvent or any aggressive means, just rub the stain with vegetable oil;
• The lining is painted with varnish in accordance with the instructions on the packaging (can);
• Painting of eurolining on the outside is carried out only in warm time of the year.

In conclusion

Price for paints and varnishes depends on their properties, composition and quality. You should not save on such compounds, because the appearance and long-term durability of the lining coating will depend on their quality.