Cleaning and washing of plastic products: dishes, teapots, barrels, etc. How to clean a toilet from yellowness, blackness and heavy dirt How to clean glass lids

Shared

Snow-white, shining with purity, just like in the picture glossy magazine, the toilet is the dream of every housewife. We know firsthand how quickly this place gets polluted. common use. Yellow or black spots, heavy dirt and unpleasant odor. How to clean it inside and out? All problems and ways to solve them will be discussed in our article.

All cleaning products can be divided into folk and professional ones. At a time when there was no abundance of goods household chemicals, our grandmothers used available means, many of which are now found in well-known branded cleaning products. It also happens, on the contrary, that a professional product that has a different purpose suddenly turns out to have good cleaning properties and is immediately adopted by enterprising housewives as a cleaning product.

Let's consider the most effective and popular means.

Folk remedies for cleaning the toilet from heavy dirt

IN Lately many housewives return to the old ones, proven over the years, folk remedies. Their main advantage is accessibility and environmental safety. Most often, such products are found in every home. But, even if they are not available, you can purchase them at your nearest store for little money.

Baking or soda ash

Has cleaning and disinfecting properties. Absorbs unpleasant odors. In addition to cleaning the surface of the toilet, it helps eliminate operational blockages in the water seal and sewer pipes. An effective product for regular cleaning and prevention.

Mustard powder

Dry mustard copes well with grease deposits on the surface of the toilet bowl, eliminating yellowness and dirt. Effectively used to clean the bowl and prevent blockages in the water seal and pipes.

Salt

An effective remedy for eliminating yellow plaque and unpleasant odor. Deletes body fat on the inner surface and in pipes. You can use a combination of salt and soda to clean and prevent blockages. A mixture of salt and turpentine, diluted to a paste consistency, removes rust well.

Vinegar

Excellent detergent and antibacterial agent. To clean and remove yellow deposits, it is better to use undiluted vinegar. Vinegar essence will help deal with severe stains.

Apply vinegar to inner surface. It is best to do this in the evening, before bed.

Leave it overnight.

In the morning, use a brush to clean off any remaining yellow residue.

Flush the toilet.

Vinegar works well when combined with baking soda and salt.

Mix one glass each of salt and baking soda.

Apply the resulting powder to the inner surface.

Sprinkle vinegar on top. The most convenient way to do this is with a spray bottle.

Leave for half an hour. The baking soda mixed with vinegar will begin to sizzle. Some of the contaminants will be removed during this reaction.

Clean any remaining dirt with a brush.

Rinse.

Citric acid or juice

It copes well with limescale and has antibacterial properties. Effectively removes blackness on the surface of the toilet bowl and prevents it reappearance. Solution citric acid can be done at the rate of 1 tablespoon of acid per 1 liter of water. For heavy pollution you can use a more concentrated solution.

In some particularly difficult cases, it is advisable to rub the stain with a slice of lemon, leave for a few minutes, and then rinse with water.

Lemon juice also perfectly freshens the air in a room, in no way inferior to professional air fresheners. But at the same time it is a natural and environmentally friendly product.

Coca Cola

This product will surprise those who do not yet know about the excellent cleaning properties of this drink. But it is so. Carbonated drinks Coca-Cola, Pepsi-Cola, Fanta, Sprite effectively clean limescale on a surface.

Apply a small amount of Coca-Cola or other drink to the dirty surface.

Clean the dirt with a brush.

Flush the toilet.

All the described means do not change the structure and color of the material from which plumbing fixtures are made. And therefore suitable for both white and colored toilets.

Professional products for effective toilet cleaning

The advertising-filled airwaves and the abundance of household chemicals on store shelves have made professional cleaning products very popular. After all, as the brochures say, all you have to do is buy, apply, and the result is guaranteed. True, the products do not always meet the stated requirements, but one cannot help but admit that the undeniable advantage of professional products is simplicity and ease of use.

If you decide to use professional household chemicals for cleaning, carefully read the instructions for use. The products may only be used as described in the instructions. Cannot be mixed and used at the same time different means. IN best case scenario A neutralization reaction may occur and no remedy will work. At worst, the consequences will be unpredictable. Please pay attention to safety requirements. As a rule, you need to wear rubber gloves when working with professional products. In some cases, a protective mask or respirator is required.

Table: Review of household chemicals for cleaning toilets

Video: Toilet cleaning products

How to clean a toilet

Cleaning the toilet can hardly be called a pleasant event. However, this must be done regularly to constant maintenance cleanliness.

Be sure to follow safety precautions while working.

Use long, durable rubber gloves. They will protect the skin from unwanted contact with chemicals and the treated surface.

Provide good ventilation toilet room. The fumes released by chemicals not only have an unpleasant odor, but also cause great harm to health.

If necessary, use a protective mask or respirator.

How to clean the lid and seat

For hygienic cleaning, use soft detergents. Treatment should be carried out with a household sponge or cloth. Do not use abrasives or hard brushes, which can damage upper layer surfaces and will ruin the appearance of the headset.

Vinegar and baking soda can be used effectively to remove yellow discoloration and urinary stones. And you can also use professional cleaning products, for example, CILLIT or Domestos.

Place baking soda on a napkin and apply evenly to stains.

Apply a second layer of vinegar.

Leave for half an hour or longer.

Wipe away dirt with a cloth.

Rinse off the product with clean water.

How to clean the bowl and the area under the rim from yellow plaque

Of the professional products, Toilet Duck is well suited for these purposes. It has a convenient packaging with a curved spout and cleans dirt well.

Apply the product evenly to the surface, starting from the area under the rim. This is the area that is most susceptible to contamination.

Close the lid and leave for half an hour.

Clean with a brush or the hard side of a household sponge. For the area under the rim, it is convenient to use a special brush with a curved handle.

Drain the tank while continuing to scrub the surface to remove any remaining cleaning product.

At general cleaning treat the outside soap solution, and then wash it off with water.

You can effectively remove yellow plaque using vinegar and soda. Coca-Cola will also cope well with this task. Methods of application are described above.

How to clean the drain hole from heavy dirt

The most effective means for removing contaminants in the drain hole are soda, salt and mustard. You can use either one of these products or a mixture in any proportion.

Pour one glass of product into drainer and stir well with a brush.

Leave for several hours. This is convenient to do in the evening before going to bed or in the morning before leaving for work.

Clean the dirt with a brush or stiff brush.

Rinse.

Diluting the cleaning agent in the drain water makes the method less effective for very heavy stains. If the contamination remains, to remove it you will need to remove the water and repeat the cleaning procedure.

How to remove water from a toilet

Drain all water from the tank.

Using a small container, scoop the water from the drain hole into a bucket. You can use a cap from a cleaning product package as a container.

Remove remaining water that is difficult to remove with a cap using a sponge.

How to remove sand from the bottom

Sometimes sand accumulates at the bottom of the toilet. It can be removed without scooping water from the drain hole.

Using a brush, stir the sand into the water.

Quickly, without allowing it to settle, drain the water from the tank.

The water in the drain hole will be renewed. Some of the sand will go down the drain.

Repeat the procedure several times.

How to clean the drain hole from blackness

Blackness on the surface is caused by bacteria black mold. The mold itself is easily removed; you just need to wipe the dirty surface with a sponge or cloth. But after a while she appears again. To completely remove blackness, you can effectively use citric acid or professional product with disinfectant properties, for example Domestos.

Use a brush, brush or cloth to remove black deposits from the surface of the toilet bowl.

Rinse thoroughly by draining the tank.

Pour 1-2 sachets of citric acid into the drain hole.

Leave the product on for several hours.

Clean the surface again.

Rinse.

How to clean a toilet flush tank

Due to constant contact with water, limescale deposits form on the inner surface of the drain tank. You can remove it using the method described above using baking soda and vinegar or professional cleaning products.

Shut off the water supply to the drain tank.

Drain the tank.

Treat the inside of the tank and the drain mechanism with a cleaning agent.

Leave it for a while.

Clean off dirt with the hard side of a household sponge.

Open the water supply valve to the drain tank.

Fill the tank with water and flush it 2-3 times.

Video: How to clean a toilet flush tank

How to clean a toilet brush: a simple and effective way

Let's consider a method of cleaning the brush together with the toilet, that is, without making separate efforts to clean the brush.

Treat the inside of the toilet with a cleaner. For example, you can use Domestos.

Leave for 15 minutes.

Clean the toilet with a brush.

Without draining the water or rinsing off the cleaning agent, place the brush into the toilet drain hole.

Leave for several hours.

Clean the surface of the toilet bowl again with a brush.

Wash the toilet and brush by draining the water from the tank.

Video: How to clean a toilet correctly

Prevention

To keep the toilet clean long time, it is important to carry out preventive actions and follow the basic rules:

Use the toilet as intended. Do not pour food or food into it household waste, there are special containers for this. For example, poured borscht will create a greasy deposit on the surface and speed up the clogging of the water seal and sewer pipes.

Flush the toilet after every use. You should not accumulate in the toilet what your body has gotten rid of.

Using a brush, clean the surface of the toilet bowl from adhering waste immediately, without allowing it to dry.

If the seat is splashed during use, immediately clean it up. It is better to use damp bactericidal wipes for this.

Treat the surface with a cleaning product at least once a week.

Make it a habit to flush hot water down the toilet once a month. This will reduce fat deposits on the surface and prevent operational blockages in the toilet and pipes.

If water is constantly flowing in the toilet, adjust the float in the flush tank or make repairs. This will reduce mineral deposits on the surface of the toilet.

Secure a container with special tablets or stickers under the toilet rim to soften water, disinfect and eliminate unpleasant odors.

Use the means and methods described in the article to regularly clean the toilet and prevent contamination, and you will not have to change the plumbing, and your “white friend” will gratefully shine with cleanliness.

The plumbing fixtures of our time are distinguished by their convenience, ergonomics and variety of appearance. But it all has one thing in common, namely the formation of urinary stones. These deposits cause housewives a lot of trouble, not to mention the fact that they create the appearance of neglect in the bathroom. How to deal with limescale and urolithiasis? This will be discussed in this publication.

Where does the problem come from?

The appearance of urinary and limescale deposits is inherent in any plumbing product that is used frequently and regularly. Both types of pollution do not form at one moment, but gradually, month after month.

Unsightly deposits are the result of improper use of the toilet, in particular, untimely flushing, defects in the ceramic or porcelain surface and insufficient hygienic cleaning.

The fact is that human urine has a specific mineral set, and if you do not train yourself to constantly drain it after yourself, then these very minerals form layers of urinary stones. Over time, they harden and are no longer easy to clean with a standard toilet brush.

A similar situation arises with lime deposits. But the speed and intensity of its formation depends not only on the above factors, but also on quality composition water.

How to deal with common stains?

If cleaning the entire surface of the toilet is an indispensable item weekly cleaning apartments, then eliminate urinary stone won't be too difficult.

In this case, you can use regular vinegar:

• First you need to pour a glass of vinegar into a separate container, cover it with a lid and heat the liquid to 40 degrees;
• Then it should be poured into the toilet, and either 2 tsp should be added there. baking soda, or a similar amount of iodine;
• Then the toilet is covered with a lid and left until the morning. The next day it will be enough to simply rinse it well with water.

The next “food” option for how to clean a toilet from urinary stones yourself is to use citric acid.

You need to deal with it as follows:

• Take a couple of packets of powder and pour them into the toilet;
• The plumbing lid slams shut all night;
• Then it will be enough to simply go over the plaque with a brush and rinse the compact bowl thoroughly.

If necessary, the entire procedure can be repeated several times in a row, which is completely harmless to sanitary ware.

If all that has been done does not have the desired effect, then the problem can be eliminated using a specific cleaning agent:

• The cheapest option would be to use regular white. Before you pour a whole bottle of this liquid into the toilet, you need to completely empty it of water. This is done using vantose;
• Silit, Domestos or granular Mister Proper will be able to solve the problem of how to clean the toilet seat from a slight deposit of urinary stone. They will not cope with more complex deposits.

Whatever industrial product is chosen, it must act according to a single rule: the compact must be dried, chemicals are added to it, and the layers are acidified throughout the night (this is in the ideal case).

Then the dirt is carefully scraped off with a wooden or plastic spatula, and finally the sanitaryware is polished with a hard brush.

What to do with old plaque?

It also happens that an apartment purchased or donated has plumbing fixtures that are in a completely deplorable state. And until a new compact is purchased, you have to independently solve the problem of how to clean the toilet rim from the old urinary stone. What can you do?

Choose:

• Oxalic acid can clean sanitaryware in no time, but you need to work with it extremely carefully, observing the rules of personal protection. The powder is collected on a sponge and evenly distributed over the most contaminated areas of the ceramic, although it can simply be poured into a bowl and washed off after a couple of hours. All this is done with hands wearing rubberized gloves;
• You can get rid of old deposits using electrolyte - a liquid that is poured into batteries. When using it, you need to not only wear rubber gloves, but also a respirator, goggles and even overalls. All this is necessary to prevent poisoning from toxic and heavy fumes. By the way, the electrolyte should be poured very carefully, avoiding splashing, and washed off after 15 minutes;
• It may seem strange and even scary, but the following a win-win How to clean a toilet lid from limestone or urinary stone - this is our favorite Coca-Cola. Thanks to observations and experiments of people, it was found that this foreign drink perfectly destroys any deposits and contaminants formed on sanitary ware. To do this, simply pour it into a bowl and wash it off after 3-4 hours, remembering to use a brush.

Having decided to clean the lid or rim of your toilet using industrial household chemicals, you need to pay attention to its quality composition.

In the fight against old fat, ordinary baking soda (sodium bicarbonate), dissolved in very hot water.

Take an enamel basin or steel pan, immerse contaminated items in it, pour soda at the rate of 2-3 tablespoons per liter of water and pour hot water. The higher its temperature, the more intense the process of fat breakdown will occur, so it is best to pour kitchen utensils boiling water from a freshly boiled kettle. To improve the effect, you can add a little dishwashing liquid. Leave for 30-40 minutes. You can periodically add boiling water to the basin to keep the water warm.

After this, remove the kitchen utensils from the soda solution and wipe them with a sponge or dish brush. The remaining undissolved fat should come off easily and quickly. After this, rinse the cleaned items thoroughly under running water. warm water.

If the items are too dirty, you can increase the exposure time of the soda solution to one and a half to two hours. During this time, even the most “difficult” fatty stains will come off. But in this case, it is better to put the basin or pan on the stove at minimum heat, keeping the water hot - or bring it to a boil every 10-15 minutes, turning off the stove in between.

What can be cleaned with baking soda solution?

Of course, not all kitchen accessories will be harmless when “bathing” in a hot soda solution. Can be washed without risk old fat in this way with items such as:

• cutlery, dishes and accessories made of metal;


• steel rails, hooks and hanging shelves;


• glassware;


• items made of earthenware and porcelain (except for painted dishes and objects).

Items with plastic parts(knives and cutlery with plastic handles, containers, plastic lids, etc.) can be cleaned soda solution only if the plastic is durable and heat-resistant. And even then, you should not use the “hard” method of boiling and prolonged exposure to very hot water - the plastic may warp.

It is better not to clean wood products in this way at all - wood swells in hot water and may crack after drying. And products made from varnished wood will be damaged in any case: the soda solution will dissolve the varnish “at the same time” with the fat layer.

It is also better not to put expensive items with gilding or enamel inserts, collectible dishes and interior items at risk and use softer (even more labor-intensive) cleaning methods.

Precautionary measures

Solution baking soda it does not have a pungent odor, no toxic fumes are released during heating, so if you decide to clean old grease in this way, there is no need to turn on the hood or open the windows.

But it’s better to wear rubber gloves, especially if the skin on your hands is dry, thin and prone to irritation.

Fatty plaque affects not only appearance dishes, but also on its functionality. Due to the appearance of soot, the food begins to burn, the remains of old fat spoil the taste finished products. Besides, it's unkempt kitchenware looks unattractive. Experienced housewives they are fighting the problem with all their might, developing effective ways. Among effective means there is soda, vinegar, salt and other improvised means that are available in the kitchen.

Method No. 1. Lemon acid

1. Wet the pan big amount boiling water Prepare a mixture of soda and citric acid, mixing the ingredients in equal proportions.
2. Apply the product to the internal and external parts, leave for 1 hour. If necessary, add water to the bulk mixture to obtain a slurry. She will hold up better.
3. Within 60 minutes, the fat will begin to move away from the walls of the dish under the influence of a chemical reaction. When specified time When it expires, scald the frying pan with boiling water and wipe with a sponge.
4. Evaluate the result and repeat the procedure if necessary. Finish cleaning by washing with scouring powder or dish gel.
5. An analogue of citric acid is juice citrus fruit. It must be mixed with soda until a paste-like mass is formed. Then the walls of the dishes are lubricated with the composition.

Method No. 2. Salt and soda

1. This method is rightfully considered the most budget-friendly, since the listed components are available in the kitchen of every housewife. Mix the ingredients in equal quantities, dilute with water until you get porridge.
2. Scald the frying pan with boiling water. Scoop up the product with a foam sponge and spread the paste over the walls with a greasy coating. Leave for 1 hour; to enhance the effect, you can wrap the dishes in cling film.
3. When the time is up, wash off the excess product with boiling water. Rub outer part frying pan with an iron sponge, and the inner pan with a soft cloth. If the result is poor, the procedure can be repeated.
4. If the plaque is too strong, you need to use soda without salt. To carry out the procedure, take 900 g. product, dilute with 1 liter of water, pour into the cavity of the container. After 2 hours, wash as usual with detergent.

Method number 3. Dry mustard

1. If the old fat deposit is not too dense, you can use mustard powder. Place the dishes to be cleaned on the stove. Heat to maximum heat, scald with boiling water.
2. Pour several packets of dry mustard into the cavity, fill with hot water and leave for 3 hours. Stir the mixture periodically and try to scrape off the fat with a wooden spatula.
3. After the specified period, wash the dishes in the usual way, evaluate the result. If you are not satisfied with it, perform the manipulations several more times.
4. To clean glassware or ceramics, use a 1 liter solution. boiling water and 250 gr. mustard powder. The container is filled with the composition and then infused for 24 hours. During this period, all the fat will peel off, you can easily remove it.

Method number 4. Vegetable oil and soap

1. If the fatty deposit is relatively fresh, prepare a hot mixture. To do this, grate or otherwise grind half a bar of tar soap and pour in 100 ml. boiling water
2. When the shavings dissolve, pour in 60 ml. vegetable or corn oil. Stir, now add the amount of soda that will bring the product to the state of porridge. As a rule, about 200 grams are required.
3. Scald the dishes with boiling water and spread the mixture over it. Place the container on the fire, heat it up, turn off the burner. Wait about 45-60 minutes, then remove the loose plaque with a sponge.

Method No. 5. Glue and laundry soap

1. Fat removal is carried out by boiling. To do this, you need to prepare a wide enamel basin or bucket in which the frying pan will be placed.
2. Pour water into a container and bring to a boil. Add 175 ml. PVA glue, mix. After 2 minutes, pour in the shavings of one block laundry soap, stir again until smooth.
3. When soap base dissolves, place the dishes with the coating inside. Cleaning does not take place immediately, the cooking time is 2.5 hours, and when complex pollution- from 3.5 hours.
4. Add hot water periodically if it boils over. The pan should sink in the liquid. When the specified time has expired, turn off the burner. Remove the dishes, clean the deposits with a sponge and dishwashing gel.

Method number 6. Soda

1. Prepare a wide basin or bucket that can be placed on the stove. Pour boiling water into the cavity, add soda at the rate of 1 liter. liquid accounts for 70 g. bulk composition. Therefore, if 10 liters are poured into a bucket. water, you need to add 700 gr. soda
2. Place the dish with the solution on the fire, bring to a boil, and place the frying pan inside. Carry out the digestion for 1-1.5 hours. When the time is up, remove the bucket from the heat.
3. Do not rush to remove the frying pan; let it sit in the solution until the liquid cools. After this, take out the dishes and remove the grease with a paste of soda and water.
4. Rinse the container with hot water and wash with liquid. If necessary, repeat the procedure, increasing the amount of sodium bicarbonate to 80 g. for 1 l.

Method No. 7. Table vinegar and citric acid

1. The technique is designed not only to eliminate the old fatty plaque, but also removing yellowness from the walls of food containers. To start manipulating, pour 1 liter. water into a saucepan, put on fire.
2. When the first bubbles appear, pour in 150 ml. vinegar solution with a concentration of 6-9%, add 30 g. citric acid. Stir the mixture until the crystals are completely dissolved.
3. Turn off the burner and place the pan into the hot mixture. Soak for 1-1.5 hours, during which time the fat will partially come off. If it is not completely removed, scrape off the residue with a hard sponge.
4. There is also an abrasive treatment. To do this, you need to prepare a paste mixture of vinegar and citric acid. Scoop it onto a sponge and wipe off the grease mechanically. Finish cleaning with regular dishwashing.

Method No. 8. Vinegar and baking soda/salt

1. As can be understood from the name of the method, the product is prepared from table or apple cider vinegar(9%) in combination with soda or salt. Regardless of this, preliminary preparation is necessary.
2. First, soak the pan in hot water with some dishwashing gel and leave for 50-60 minutes to remove the grease. After this, combine baking soda or salt with vinegar to form a paste.
3. Rub the product onto the outer and inner walls of the dish and wait a few hours. Next, try scraping off the fat with a sponge; if necessary, scald the pan with boiling water. Finish cleaning with standard washing.

Consider removing old fat using citric acid, baking soda, PVA glue, salt, table vinegar. If desired, combine the options you like with each other. Take precautions to protect your skin and respiratory tract.

Video: how to clean dishes from grease and burnt marks

No matter how expensive and high-quality your plumbing fixtures are, nothing will make them shine clean forever without proper care. When it comes to toilets, the main problem they suffer from is urinary stone. The same yellowness that you can see under the rim and inside the toilet. And if the situation is further aggravated by the lack of regular cleaning and disinfection, the problem will soon appear in all its glory. You will learn how to clean the toilet lid from yellowness in this article.

Why does the toilet lid turn yellow?

Human urine has a special composition - certain minerals, which subsequently form urinary stones. If there is urine residue on the surface, plaque accumulates and builds up on the walls of the toilet. It just consists of urinary stone. This plaque builds up over time, and the longer it is not removed, the more difficult it will be to clean. However, there are certain tips on how to clean the toilet lid, and the toilet itself, from yellowness.

Important! Plaque usually covers not only the seat, but also the bowl itself, especially inside. There are several reasons for this, and each of them must be dealt with in its own way. Find out:

How to keep the toilet clean?

Having figured out where the yellow plaque on the toilet comes from, it’s time to find out how to deal with it. The most in a simple way preventing the formation of urinary stones is regular cleaning, because it’s always easier to produce regular care and keep the plumbing clean, rather than making efforts to remove old stains.

You can keep your toilet clean and white in the following ways:

• flush water regularly cistern, after each visit to the toilet;
• delete daily toilet paper or use a damp cloth to remove splashes and drops from the toilet lid;
• Once every few days, apply a toilet cleaner to the surface of the toilet to prevent the appearance of plaque;
• you can use special cassettes that are attached to the toilet, under the lid, and every time you press the flush button, water enters the toilet along with special remedy, which fights the formation of dirt and also has a pleasant aroma.

Following these simple rules, you are unlikely to encounter the problem of a strong yellow coating. And if you also read the article at the link with the rating of household chemicals, then all your problems with further choice.

How to remove not too old plaque?

If you always try to keep your toilet clean, according to the recommendations above, then the maximum that awaits you is to occasionally remove the yellowness from the toilet seat and its surface. Let's look at everything possible means who do this very well.

Table vinegar

Cleaning is done as follows:

• In a saucepan or any container convenient for you, heat about one glass of vinegar until warm.

Important! If you have a food thermometer, the temperature of the vinegar should be 40 degrees Celsius. The liquid should feel warm, but not hot.

• Pour the heated vinegar into the toilet bowl and add two teaspoons of baking soda there.
• Leave to stand overnight.
• In the morning, it will be enough to just rinse the toilet with a brush and drain the water.

Important! The melamine sponge copes well with any dirt.

If you only need to wash the toilet lid from yellowness, then you need to:

1. In a small container, mix warm vinegar and baking soda.
2. Wearing rubber gloves, quickly apply this mixture with a sponge.
3. Leave for 15-20 minutes and then rinse with a clean sponge.

Lemon acid

Another remedy for removing old plaque is citric acid.

Important! It removes not only urinary stones, but also calcium deposits that build up on the walls of the toilet due to the fact that the water in the taps is too hard.

This procedure is incredibly simple and convenient. All you have to do is pour a couple of citric acid packets into the toilet and leave it all to react overnight. After it passes chemical reaction— you just need to clean the toilet with a brush and drain the water.

Important! Cleaning procedures using vinegar or citric acid are best done after draining the water. To do this, you can use a plunger.

How to get rid of old plaque?

It happens that you get a toilet in a fairly neglected state. None store products in tandem with a brush they cannot cope with existing dirt. Then it is necessary to connect heavy artillery.

Household chemicals containing acid

The easiest way to clean a toilet from old plaque is the use of household chemicals available on the product market. IN in this case It is necessary to pay attention to those products when working with which you need to use a protective mask. Only they are able to cope with strong and old pollution.

Important! The most effective products will be those containing formic or sulfuric acid.

Coca Cola

No matter how funny and strange it may sound, housewives have repeatedly tested and proven that Coca-Cola can cope with many contaminants. Cleaning the toilet was no exception.

In order to clean the accumulated plaque and deposits, you just need to pour a bottle of the drink into the toilet and leave it to stand for several hours. After this, work a little with a brush and drain the water.

Oxalic acid

Oxalic acid is a crystalline powder. You need to work with it exclusively in thick rubber gloves. It is applied with a sponge to the toilet lid and under the rim. For ease of application, use a damp sponge.

If there is heavy dirt at the bottom of the toilet, pour powder inside. Wash off after a few hours.

Important! This method also works well to clean the toilet seat.

Electrolyte

The most powerful, but at the same time, the most difficult to use toilet cleaner. The difficulty lies in the strong toxicity of the electrolyte. With him you need to provide yourself maximum protection. In addition to thick rubber gloves, you should wear a protective mask, your body should be hidden as much as possible under thick clothing, and it would be a good idea to wear goggles to protect your eyes.

Since the electrolyte is a liquid, you just need to pour it into the toilet, doing this very carefully, avoiding splashes. After 15 minutes you can drain the water.

White

If you want to achieve maximum whiteness of the toilet bowl, then this product will do the job perfectly. “Whiteness” just needs to be poured into the toilet bowl and left there, flushed after a few hours.

Important! All of the above products will be even more effective if you pour or pour them into a toilet bowl that has previously been emptied of water using a plunger.

After leaving the toilet with the cleaner overnight, it will be good if you remove the deposits in the morning using a wooden spatula or a construction spatula. Such option will do with very large stone deposits. The stone will become wet under the influence of chemicals and will easily come off in pieces from the surface.

What to do if the plastic cover turns yellow?

It happens that over time the plastic on the lid turns yellow. To whiten the toilet lid from yellowness, it is best to remove it first, if the design of the toilet allows it. If this cannot be done, apply all the products described below with a sponge and leave for a while. If you still managed to remove the lid, then clean it by soaking.